提交 34681d84 编写于 作者: S Sam Van Den Berge 提交者: Vinod Koul

dmaengine: s3c24xx: Add dma_slave_map for s3c2440 devices

This patch updates the s3c24xx dma driver to be able to pass a
dma_slave_map array via the platform data. This is needed to
be able to use the new, simpler dmaengine API [1].
I used the virtual DMA channels as a parameter for the dma_filter
function. By doing that, I could reuse the existing filter function in
drivers/dma/s3c24xx-dma.c.

I have tested this on my mini2440 board with the audio driver.
According to my observations, dma_request_slave_channel in the
function dmaengine_pcm_new in the file
sound/soc/soc-generic-dmaengine-pcm.c now returns a valid DMA channel
whereas before no DMA channel was returned at that point.

Entries for DMACH_XD0, DMACH_XD1 and DMACH_TIMER are missing because I
don't realy know which driver to use for these.

[1]
http://lists.infradead.org/pipermail/linux-arm-kernel/2015-December/393635.htmlSigned-off-by: NSam Van Den Berge <sam.van.den.berge@telenet.be>
Reviewed-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
上级 360af35b
......@@ -33,6 +33,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/platform_data/dma-s3c24xx.h>
#include <linux/dmaengine.h>
#include <mach/hardware.h>
#include <mach/regs-clock.h>
......@@ -439,10 +440,44 @@ static struct s3c24xx_dma_channel s3c2440_dma_channels[DMACH_MAX] = {
[DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), },
};
static const struct dma_slave_map s3c2440_dma_slave_map[] = {
/* TODO: DMACH_XD0 */
/* TODO: DMACH_XD1 */
{ "s3c2440-sdi", "rx-tx", (void *)DMACH_SDI },
{ "s3c2410-spi.0", "rx", (void *)DMACH_SPI0 },
{ "s3c2410-spi.0", "tx", (void *)DMACH_SPI0 },
{ "s3c2410-spi.1", "rx", (void *)DMACH_SPI1 },
{ "s3c2410-spi.1", "tx", (void *)DMACH_SPI1 },
{ "s3c2440-uart.0", "rx", (void *)DMACH_UART0 },
{ "s3c2440-uart.0", "tx", (void *)DMACH_UART0 },
{ "s3c2440-uart.1", "rx", (void *)DMACH_UART1 },
{ "s3c2440-uart.1", "tx", (void *)DMACH_UART1 },
{ "s3c2440-uart.2", "rx", (void *)DMACH_UART2 },
{ "s3c2440-uart.2", "tx", (void *)DMACH_UART2 },
{ "s3c2440-uart.3", "rx", (void *)DMACH_UART3 },
{ "s3c2440-uart.3", "tx", (void *)DMACH_UART3 },
/* TODO: DMACH_TIMER */
{ "s3c24xx-iis", "rx", (void *)DMACH_I2S_IN },
{ "s3c24xx-iis", "tx", (void *)DMACH_I2S_OUT },
{ "samsung-ac97", "rx", (void *)DMACH_PCM_IN },
{ "samsung-ac97", "tx", (void *)DMACH_PCM_OUT },
{ "samsung-ac97", "rx", (void *)DMACH_MIC_IN },
{ "s3c-hsudc", "rx0", (void *)DMACH_USB_EP1 },
{ "s3c-hsudc", "rx1", (void *)DMACH_USB_EP2 },
{ "s3c-hsudc", "rx2", (void *)DMACH_USB_EP3 },
{ "s3c-hsudc", "rx3", (void *)DMACH_USB_EP4 },
{ "s3c-hsudc", "tx0", (void *)DMACH_USB_EP1 },
{ "s3c-hsudc", "tx1", (void *)DMACH_USB_EP2 },
{ "s3c-hsudc", "tx2", (void *)DMACH_USB_EP3 },
{ "s3c-hsudc", "tx3", (void *)DMACH_USB_EP4 }
};
static struct s3c24xx_dma_platdata s3c2440_dma_platdata = {
.num_phy_channels = 4,
.channels = s3c2440_dma_channels,
.num_channels = DMACH_MAX,
.slave_map = s3c2440_dma_slave_map,
.slavecnt = ARRAY_SIZE(s3c2440_dma_slave_map),
};
struct platform_device s3c2440_device_dma = {
......
......@@ -1301,6 +1301,9 @@ static int s3c24xx_dma_probe(struct platform_device *pdev)
s3cdma->slave.device_prep_dma_cyclic = s3c24xx_dma_prep_dma_cyclic;
s3cdma->slave.device_config = s3c24xx_dma_set_runtime_config;
s3cdma->slave.device_terminate_all = s3c24xx_dma_terminate_all;
s3cdma->slave.filter.map = pdata->slave_map;
s3cdma->slave.filter.mapcnt = pdata->slavecnt;
s3cdma->slave.filter.fn = s3c24xx_dma_filter;
/* Register as many memcpy channels as there are physical channels */
ret = s3c24xx_dma_init_virtual_channels(s3cdma, &s3cdma->memcpy,
......
......@@ -30,16 +30,22 @@ struct s3c24xx_dma_channel {
u16 chansel;
};
struct dma_slave_map;
/**
* struct s3c24xx_dma_platdata - platform specific settings
* @num_phy_channels: number of physical channels
* @channels: array of virtual channel descriptions
* @num_channels: number of virtual channels
* @slave_map: dma slave map matching table
* @slavecnt: number of elements in slave_map
*/
struct s3c24xx_dma_platdata {
int num_phy_channels;
struct s3c24xx_dma_channel *channels;
int num_channels;
const struct dma_slave_map *slave_map;
int slavecnt;
};
struct dma_chan;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册