提交 3434f378 编写于 作者: G Guenter Roeck

hwmon: Driver for Nuvoton NCT7802Y

NCT7802Y is an I2C based hardware monitoring chip from Nuvoton.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
上级 3bdec670
Kernel driver nct7802
=====================
Supported chips:
* Nuvoton NCT7802Y
Prefix: 'nct7802'
Addresses scanned: I2C 0x28..0x2f
Datasheet: Available from Nuvoton web site
Authors:
Guenter Roeck <linux@roeck-us.net>
Description
-----------
This driver implements support for the Nuvoton NCT7802Y hardware monitoring
chip. NCT7802Y supports 6 temperature sensors, 5 voltage sensors, and 3 fan
speed sensors.
The chip also supports intelligent fan speed control. This functionality is
not currently supported by the driver.
Tested Boards and BIOS Versions
-------------------------------
The driver has been reported to work with the following boards and
BIOS versions.
Board BIOS version
---------------------------------------------------------------
Kontron COMe-bSC2 CHR2E934.001.GGO
Kontron COMe-bIP2 CCR2E212
......@@ -1123,6 +1123,17 @@ config SENSORS_NCT6775
This driver can also be built as a module. If so, the module
will be called nct6775.
config SENSORS_NCT7802
tristate "Nuvoton NCT7802Y"
depends on I2C
select REGMAP_I2C
help
If you say yes here you get support for the Nuvoton NCT7802Y
hardware monitoring chip.
This driver can also be built as a module. If so, the module
will be called nct7802.
config SENSORS_PCF8591
tristate "Philips PCF8591 ADC/DAC"
depends on I2C
......
......@@ -118,6 +118,7 @@ obj-$(CONFIG_SENSORS_MCP3021) += mcp3021.o
obj-$(CONFIG_SENSORS_MENF21BMC_HWMON) += menf21bmc_hwmon.o
obj-$(CONFIG_SENSORS_NCT6683) += nct6683.o
obj-$(CONFIG_SENSORS_NCT6775) += nct6775.o
obj-$(CONFIG_SENSORS_NCT7802) += nct7802.o
obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
......
此差异已折叠。
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册