提交 33ada14a 编写于 作者: B Bard Liao 提交者: Mark Brown

ASoC: add rt5665 codec driver

This is the initial codec driver for rt5665.
Signed-off-by: NBard Liao <bardliao@realtek.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
上级 134340b3
RT5665/RT5666/RT5668 audio CODEC
This device supports I2C only.
Required properties:
- compatible : One of "realtek,rt5665", "realtek,rt5666" or "realtek,rt5668".
- reg : The I2C address of the device.
- interrupts : The CODEC's interrupt output.
Optional properties:
- realtek,in1-differential
- realtek,in2-differential
- realtek,in3-differential
- realtek,in4-differential
Boolean. Indicate MIC1/2/3/4 input are differential, rather than single-ended.
- realtek,dmic1-data-pin
0: dmic1 is not used
1: using GPIO4 pin as dmic1 data pin
2: using IN2N pin as dmic2 data pin
- realtek,dmic2-data-pin
0: dmic2 is not used
1: using GPIO5 pin as dmic2 data pin
2: using IN2P pin as dmic2 data pin
- realtek,jd-src
0: No JD is used
1: using JD1 as JD source
- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
Pins on the device (for linking into audio routes) for RT5659/RT5658:
* DMIC L1
* DMIC R1
* DMIC L2
* DMIC R2
* IN1P
* IN1N
* IN2P
* IN2N
* IN3P
* IN3N
* IN4P
* IN4N
* HPOL
* HPOR
* LOUTL
* LOUTR
* MONOOUT
* PDML
* PDMR
Example:
rt5659 {
compatible = "realtek,rt5665";
reg = <0x1b>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
realtek,ldo1-en-gpios =
<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
};
/*
* linux/sound/rt5665.h -- Platform data for RT5665
*
* Copyright 2016 Realtek Microelectronics
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __LINUX_SND_RT5665_H
#define __LINUX_SND_RT5665_H
enum rt5665_dmic1_data_pin {
RT5665_DMIC1_NULL,
RT5665_DMIC1_DATA_GPIO4,
RT5665_DMIC1_DATA_IN2N,
};
enum rt5665_dmic2_data_pin {
RT5665_DMIC2_NULL,
RT5665_DMIC2_DATA_GPIO5,
RT5665_DMIC2_DATA_IN2P,
};
enum rt5665_jd_src {
RT5665_JD_NULL,
RT5665_JD1,
};
struct rt5665_platform_data {
bool in1_diff;
bool in2_diff;
bool in3_diff;
bool in4_diff;
int ldo1_en; /* GPIO for LDO1_EN */
enum rt5665_dmic1_data_pin dmic1_data_pin;
enum rt5665_dmic2_data_pin dmic2_data_pin;
enum rt5665_jd_src jd_src;
unsigned int sar_hs_type;
};
#endif
......@@ -114,6 +114,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_RT5651 if I2C
select SND_SOC_RT5659 if I2C
select SND_SOC_RT5660 if I2C
select SND_SOC_RT5665 if I2C
select SND_SOC_RT5663 if I2C
select SND_SOC_RT5670 if I2C
select SND_SOC_RT5677 if I2C && SPI_MASTER
......@@ -649,6 +650,7 @@ config SND_SOC_RL6231
default y if SND_SOC_RT5651=y
default y if SND_SOC_RT5659=y
default y if SND_SOC_RT5660=y
default y if SND_SOC_RT5665=y
default y if SND_SOC_RT5663=y
default y if SND_SOC_RT5670=y
default y if SND_SOC_RT5677=y
......@@ -659,6 +661,7 @@ config SND_SOC_RL6231
default m if SND_SOC_RT5651=m
default m if SND_SOC_RT5659=m
default m if SND_SOC_RT5660=m
default m if SND_SOC_RT5665=m
default m if SND_SOC_RT5663=m
default m if SND_SOC_RT5670=m
default m if SND_SOC_RT5677=m
......@@ -708,6 +711,9 @@ config SND_SOC_RT5659
config SND_SOC_RT5660
tristate
config SND_SOC_RT5665
tristate
config SND_SOC_RT5663
tristate
......
......@@ -114,6 +114,7 @@ snd-soc-rt5645-objs := rt5645.o
snd-soc-rt5651-objs := rt5651.o
snd-soc-rt5659-objs := rt5659.o
snd-soc-rt5660-objs := rt5660.o
snd-soc-rt5665-objs := rt5665.o
snd-soc-rt5663-objs := rt5663.o
snd-soc-rt5670-objs := rt5670.o
snd-soc-rt5677-objs := rt5677.o
......@@ -338,6 +339,7 @@ obj-$(CONFIG_SND_SOC_RT5645) += snd-soc-rt5645.o
obj-$(CONFIG_SND_SOC_RT5651) += snd-soc-rt5651.o
obj-$(CONFIG_SND_SOC_RT5659) += snd-soc-rt5659.o
obj-$(CONFIG_SND_SOC_RT5660) += snd-soc-rt5660.o
obj-$(CONFIG_SND_SOC_RT5665) += snd-soc-rt5665.o
obj-$(CONFIG_SND_SOC_RT5663) += snd-soc-rt5663.o
obj-$(CONFIG_SND_SOC_RT5670) += snd-soc-rt5670.o
obj-$(CONFIG_SND_SOC_RT5677) += snd-soc-rt5677.o
......
此差异已折叠。
此差异已折叠。
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册