提交 3264f976 编写于 作者: H Hirokazu Takata

m32r: Rearrange platform-dependent codes

Rearrange platform-dependent codes from arch/m32r/kernel/*.c
to arch/m32r/platforms/{platform}/.
Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
上级 e6a7ba7e
...@@ -36,7 +36,8 @@ LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name) ...@@ -36,7 +36,8 @@ LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
libs-y += arch/m32r/lib/ $(LIBGCC) libs-y += arch/m32r/lib/ $(LIBGCC)
core-y += arch/m32r/kernel/ \ core-y += arch/m32r/kernel/ \
arch/m32r/mm/ \ arch/m32r/mm/ \
arch/m32r/boot/ arch/m32r/boot/ \
arch/m32r/platforms/
drivers-$(CONFIG_OPROFILE) += arch/m32r/oprofile/ drivers-$(CONFIG_OPROFILE) += arch/m32r/oprofile/
......
...@@ -8,14 +8,6 @@ obj-y := process.o entry.o traps.o align.o irq.o setup.o time.o \ ...@@ -8,14 +8,6 @@ obj-y := process.o entry.o traps.o align.o irq.o setup.o time.o \
m32r_ksyms.o sys_m32r.o semaphore.o signal.o ptrace.o m32r_ksyms.o sys_m32r.o semaphore.o signal.o ptrace.o
obj-$(CONFIG_SMP) += smp.o smpboot.o obj-$(CONFIG_SMP) += smp.o smpboot.o
obj-$(CONFIG_PLAT_MAPPI) += setup_mappi.o io_mappi.o
obj-$(CONFIG_PLAT_MAPPI2) += setup_mappi2.o io_mappi2.o
obj-$(CONFIG_PLAT_MAPPI3) += setup_mappi3.o io_mappi3.o
obj-$(CONFIG_PLAT_USRV) += setup_usrv.o io_usrv.o
obj-$(CONFIG_PLAT_M32700UT) += setup_m32700ut.o io_m32700ut.o
obj-$(CONFIG_PLAT_OPSPUT) += setup_opsput.o io_opsput.o
obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_PLAT_OAKS32R) += setup_oaks32r.o io_oaks32r.o
obj-$(CONFIG_PLAT_M32104UT) += setup_m32104ut.o io_m32104ut.o
EXTRA_AFLAGS := -traditional EXTRA_AFLAGS := -traditional
# arch/m32r/platforms/Makefile
obj-$(CONFIG_PLAT_M32104UT) += m32104ut/
obj-$(CONFIG_PLAT_M32700UT) += m32700ut/
obj-$(CONFIG_PLAT_MAPPI) += mappi/
obj-$(CONFIG_PLAT_MAPPI2) += mappi2/
obj-$(CONFIG_PLAT_MAPPI3) += mappi3/
obj-$(CONFIG_PLAT_OAKS32R) += oaks32r/
obj-$(CONFIG_PLAT_OPSPUT) += opsput/
obj-$(CONFIG_PLAT_USRV) += usrv/
/* /*
* linux/arch/m32r/kernel/io_m32104ut.c * linux/arch/m32r/platforms/m32104ut/io.c
* *
* Typical I/O routines for M32104UT board. * Typical I/O routines for M32104UT board.
* *
......
/* /*
* linux/arch/m32r/kernel/setup_m32104ut.c * linux/arch/m32r/platforms/m32104ut/setup.c
* *
* Setup routines for M32104UT Board * Setup routines for M32104UT Board
* *
......
/* /*
* linux/arch/m32r/kernel/io_m32700ut.c * linux/arch/m32r/platforms/m32700ut/io.c
* *
* Typical I/O routines for M32700UT board. * Typical I/O routines for M32700UT board.
* *
......
/* /*
* linux/arch/m32r/kernel/setup_m32700ut.c * linux/arch/m32r/platforms/m32700ut/setup.c
* *
* Setup routines for Renesas M32700UT Board * Setup routines for Renesas M32700UT Board
* *
......
/* /*
* linux/arch/m32r/kernel/io_mappi.c * linux/arch/m32r/platforms/mappi/io.c
* *
* Typical I/O routines for Mappi board. * Typical I/O routines for Mappi board.
* *
......
/* /*
* linux/arch/m32r/kernel/setup_mappi.c * linux/arch/m32r/platforms/mappi/setup.c
* *
* Setup routines for Renesas MAPPI Board * Setup routines for Renesas MAPPI Board
* *
......
/* /*
* linux/arch/m32r/kernel/io_mappi2.c * linux/arch/m32r/platforms/mappi2/io.c
* *
* Typical I/O routines for Mappi2 board. * Typical I/O routines for Mappi2 board.
* *
......
/* /*
* linux/arch/m32r/kernel/setup_mappi2.c * linux/arch/m32r/platforms/mappi2/setup.c
* *
* Setup routines for Renesas MAPPI-II(M3A-ZA36) Board * Setup routines for Renesas MAPPI-II(M3A-ZA36) Board
* *
......
/* /*
* linux/arch/m32r/kernel/io_mappi3.c * linux/arch/m32r/platforms/mappi3/io.c
* *
* Typical I/O routines for Mappi3 board. * Typical I/O routines for Mappi3 board.
* *
......
/* /*
* linux/arch/m32r/kernel/setup_mappi3.c * linux/arch/m32r/platforms/mappi3/setup.c
* *
* Setup routines for Renesas MAPPI-III(M3A-2170) Board * Setup routines for Renesas MAPPI-III(M3A-2170) Board
* *
......
/* /*
* linux/arch/m32r/kernel/io_oaks32r.c * linux/arch/m32r/platforms/oaks32r/io.c
* *
* Typical I/O routines for OAKS32R board. * Typical I/O routines for OAKS32R board.
* *
......
/* /*
* linux/arch/m32r/kernel/setup_oaks32r.c * linux/arch/m32r/platforms/oaks32r/setup.c
* *
* Setup routines for OAKS32R Board * Setup routines for OAKS32R Board
* *
......
/* /*
* linux/arch/m32r/kernel/io_opsput.c * linux/arch/m32r/platforms/opsput/io.c
* *
* Typical I/O routines for OPSPUT board. * Typical I/O routines for OPSPUT board.
* *
......
/* /*
* linux/arch/m32r/kernel/setup_opsput.c * linux/arch/m32r/platforms/opsput/setup.c
* *
* Setup routines for Renesas OPSPUT Board * Setup routines for Renesas OPSPUT Board
* *
......
/* /*
* linux/arch/m32r/kernel/io_usrv.c * linux/arch/m32r/platforms/usrv/io.c
* *
* Typical I/O routines for uServer board. * Typical I/O routines for uServer board.
* *
...@@ -17,7 +17,7 @@ ...@@ -17,7 +17,7 @@
#include <asm/io.h> #include <asm/io.h>
#include <linux/types.h> #include <linux/types.h>
#include "../drivers/m32r_cfc.h" #include "../../../../drivers/pcmcia/m32r_cfc.h"
extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int); extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int);
extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int); extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int);
......
/* /*
* linux/arch/m32r/kernel/setup_usrv.c * linux/arch/m32r/platforms/usrv/setup.c
* *
* Setup routines for MITSUBISHI uServer * Setup routines for MITSUBISHI uServer
* *
...@@ -198,7 +198,7 @@ void __init init_IRQ(void) ...@@ -198,7 +198,7 @@ void __init init_IRQ(void)
#endif /* CONFIG_SERIAL_M32R_SIO */ #endif /* CONFIG_SERIAL_M32R_SIO */
/* INT#67-#71: CFC#0 IREQ on PLD */ /* INT#67-#71: CFC#0 IREQ on PLD */
for (i = 0 ; i < CONFIG_CFC_NUM ; i++ ) { for (i = 0 ; i < CONFIG_M32R_CFC_NUM ; i++ ) {
irq_desc[PLD_IRQ_CF0 + i].status = IRQ_DISABLED; irq_desc[PLD_IRQ_CF0 + i].status = IRQ_DISABLED;
irq_desc[PLD_IRQ_CF0 + i].chip = &m32700ut_pld_irq_type; irq_desc[PLD_IRQ_CF0 + i].chip = &m32700ut_pld_irq_type;
irq_desc[PLD_IRQ_CF0 + i].action = 0; irq_desc[PLD_IRQ_CF0 + i].action = 0;
...@@ -246,4 +246,3 @@ void __init init_IRQ(void) ...@@ -246,4 +246,3 @@ void __init init_IRQ(void)
icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_ISMOD11; icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_ISMOD11;
enable_mappi_irq(M32R_IRQ_INT1); enable_mappi_irq(M32R_IRQ_INT1);
} }
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册