提交 31c77388 编写于 作者: B Ben Widawsky 提交者: Daniel Vetter

drm/i915: Better overclock support

Most importantly this will allow users to set overclock frequencies in
sysfs. Previously the max was limited by the RP0 max as opposed to the
overclock max. This is useful if one wants to either limit the max
overclock frequency, or set the minimum frequency to be in the overclock
range. It also fixes an issue where if one sets the max frequency to be
below the overclock max, they wouldn't be able to set back the proper
overclock max.

In addition I've added a couple of other bits:
Show the overclock freq. as max in sysfs
Print the overclock max in debugfs.
Print a warning if the user sets the min frequency to be in the
overclock range.

In this patch I've decided to store the hw_max when we read it from the
pcode at init. The reason I do this is the pcode reads can fail, and are
slow.

v2: Report when user requested overclocked max (Daniel)
Remove when user sets min to overclock range (Daniel)

Reported-by: freezer from #intel-gfx on irc
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
[danvet: Fixup the s/100MHz/50MHz/ confusion in an unrelated comment
that Mika spotted.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
上级 2c55c336
......@@ -1006,6 +1006,9 @@ static int i915_cur_delayinfo(struct seq_file *m, void *unused)
max_freq = rp_state_cap & 0xff;
seq_printf(m, "Max non-overclocked (RP0) frequency: %dMHz\n",
max_freq * GT_FREQUENCY_MULTIPLIER);
seq_printf(m, "Max overclocked frequency: %dMHz\n",
dev_priv->rps.hw_max * GT_FREQUENCY_MULTIPLIER);
} else {
seq_printf(m, "no P-state info available\n");
}
......
......@@ -668,6 +668,7 @@ struct intel_gen6_power_mgmt {
u8 cur_delay;
u8 min_delay;
u8 max_delay;
u8 hw_max;
struct delayed_work delayed_resume_work;
......
......@@ -226,7 +226,7 @@ static ssize_t gt_max_freq_mhz_show(struct device *kdev, struct device_attribute
int ret;
mutex_lock(&dev_priv->rps.hw_lock);
ret = dev_priv->rps.max_delay * GT_FREQUENCY_MULTIPLIER;
ret = dev_priv->rps.hw_max * GT_FREQUENCY_MULTIPLIER;
mutex_unlock(&dev_priv->rps.hw_lock);
return snprintf(buf, PAGE_SIZE, "%d\n", ret);
......@@ -239,7 +239,7 @@ static ssize_t gt_max_freq_mhz_store(struct device *kdev,
struct drm_minor *minor = container_of(kdev, struct drm_minor, kdev);
struct drm_device *dev = minor->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 val, rp_state_cap, hw_max, hw_min;
u32 val, rp_state_cap, hw_max, hw_min, non_oc_max;
ssize_t ret;
ret = kstrtou32(buf, 0, &val);
......@@ -251,7 +251,8 @@ static ssize_t gt_max_freq_mhz_store(struct device *kdev,
mutex_lock(&dev_priv->rps.hw_lock);
rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
hw_max = (rp_state_cap & 0xff);
hw_max = dev_priv->rps.hw_max;
non_oc_max = (rp_state_cap & 0xff);
hw_min = ((rp_state_cap & 0xff0000) >> 16);
if (val < hw_min || val > hw_max || val < dev_priv->rps.min_delay) {
......@@ -259,6 +260,10 @@ static ssize_t gt_max_freq_mhz_store(struct device *kdev,
return -EINVAL;
}
if (val > non_oc_max)
DRM_DEBUG("User requested overclocking to %d\n",
val * GT_FREQUENCY_MULTIPLIER);
if (dev_priv->rps.cur_delay > val)
gen6_set_rps(dev_priv->dev, val);
......@@ -302,7 +307,7 @@ static ssize_t gt_min_freq_mhz_store(struct device *kdev,
mutex_lock(&dev_priv->rps.hw_lock);
rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
hw_max = (rp_state_cap & 0xff);
hw_max = dev_priv->rps.hw_max;
hw_min = ((rp_state_cap & 0xff0000) >> 16);
if (val < hw_min || val > hw_max || val > dev_priv->rps.max_delay) {
......
......@@ -2558,8 +2558,8 @@ static void gen6_enable_rps(struct drm_device *dev)
rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS);
/* In units of 100MHz */
dev_priv->rps.max_delay = rp_state_cap & 0xff;
/* In units of 50MHz */
dev_priv->rps.hw_max = dev_priv->rps.max_delay = rp_state_cap & 0xff;
dev_priv->rps.min_delay = (rp_state_cap & 0xff0000) >> 16;
dev_priv->rps.cur_delay = 0;
......@@ -2646,6 +2646,7 @@ static void gen6_enable_rps(struct drm_device *dev)
DRM_DEBUG_DRIVER("overclocking supported, adjusting frequency max from %dMHz to %dMHz\n",
(dev_priv->rps.max_delay & 0xff) * 50,
(pcu_mbox & 0xff) * 50);
dev_priv->rps.hw_max = pcu_mbox & 0xff;
dev_priv->rps.max_delay = pcu_mbox & 0xff;
}
} else {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册