ath9k_hw: disable ANI for AR9003

ANI is still being debugged on AR9003 by our systems team
so it should not yet be enabled yet. When ANI will be
enabled all ANI functionality is expected to be enabled
so fill the ANI functionality to all for AR9003 for now
as well.

Cc: Enis Akay <Enis.Akay@atheros.com>
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/hw.c

@@ -363,7 +363,13 @@ static void ath9k_hw_init_config(struct ath_hw *ah)
 	ah->config.ofdm_trig_high = 500;
 	ah->config.cck_trig_high = 200;
 	ah->config.cck_trig_low = 100;
-	ah->config.enable_ani = 1;
+
+	/*
+	 * For now ANI is disabled for AR9003, it is still
+	 * being tested.
+	 */
+	if (!AR_SREV_9300_20_OR_LATER(ah))
+		ah->config.enable_ani = 1;
 
 	for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
 		ah->config.spurchans[i][0] = AR_NO_SPUR;
@@ -941,7 +947,7 @@ static int __ath9k_hw_init(struct ath_hw *ah)
 	ath9k_hw_init_cal_settings(ah);
 
 	ah->ani_function = ATH9K_ANI_ALL;
-	if (AR_SREV_9280_10_OR_LATER(ah))
+	if (AR_SREV_9280_10_OR_LATER(ah) && !AR_SREV_9300_20_OR_LATER(ah))
 		ah->ani_function &= ~ATH9K_ANI_NOISE_IMMUNITY_LEVEL;
 
 	ath9k_hw_init_mode_regs(ah);