Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (85 commits)
  [ARM] pxa: add base support for PXA930 Handheld Platform (aka SAAR)
  [ARM] pxa: add base support for PXA930 Evaluation Board (aka TavorEVB)
  [ARM] pxa: add base support for PXA930 (aka Tavor-P)
  [ARM] Update mach-types
  [ARM] pxa: make littleton to use the new smc91x platform data
  [ARM] pxa: make zylonite to use the new smc91x platform data
  [ARM] pxa: make mainstone to use the new smc91x platform data
  [ARM] pxa: make lubbock to use new smc91x platform data
  [NET] smc91x: prepare SMC_USE_PXA_DMA to be specified in platform data
  [NET] smc91x: prepare for SMC_IO_SHIFT to be a platform configurable variable
  [NET] smc91x: add SMC91X_NOWAIT flag to platform data
  [NET] smc91x: favor the use of SMC91X_USE_* instead of SMC_CAN_USE_*
  [NET] smc91x: remove "irq_flags" from "struct smc91x_platdata"
  [ARM] 5146/1: pxa2xx: convert all boards to call pxa2xx_transceiver_mode helper
  Support for LCD on e740 e750 e400 and e800 e-series PDAs
  E-series UDC support
  PXA UDC - allow use of inverted GPIO for pullup
  Add e350 support
  Fix broken e-series build
  E-series GPIO / IRQ definitions.
  ...

MAINTAINERS

@@ -480,11 +480,28 @@ M:	kernel@wantstofly.org
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/COMPULAB CM-X270/EM-X270 MACHINE SUPPORT
+P:	Mike Rapoport
+M:	mike@compulab.co.il
+L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S:	Maintained
+
 ARM/CORGI MACHINE SUPPORT
 P:	Richard Purdie
 M:	rpurdie@rpsys.net
 S:	Maintained
 
+ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
+P:	Daniel Ribeiro
+M:	drwyrm@gmail.com
+P:	Stefan Schmidt
+M:	stefan@openezx.org
+P:	Harald Welte
+M:	laforge@openezx.org
+L:	openezx-devel@lists.openezx.org (subscribers-only)
+W:	http://www.openezx.org/
+S:	Maintained
+
 ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
 P:	Lennert Buytenhek
 M:	kernel@wantstofly.org
@@ -572,10 +589,18 @@ L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/TOSA MACHINE SUPPORT
+P:	Dmitry Baryshkov
+M:	dbaryshkov@gmail.com
 P:	Dirk Opfer
 M:	dirk@opfer-online.de
 S:	Maintained
 
+ARM/PALMTX SUPPORT
+P:	Marek Vasut
+M:	marek.vasut@gmail.com
+W:	http://hackndev.com
+S:	Maintained
+
 ARM/PLEB SUPPORT
 P:	Peter Chubb
 M:	pleb@gelato.unsw.edu.au

arch/arm/common/sa1111.c

@@ -627,7 +627,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
 	if (!sachip)
 		return -ENOMEM;
 
-	sachip->clk = clk_get(me, "GPIO27_CLK");
+	sachip->clk = clk_get(me, "SA1111_CLK");
 	if (!sachip->clk) {
 		ret = PTR_ERR(sachip->clk);
 		goto err_free;

arch/arm/mach-pxa/Kconfig

@@ -16,18 +16,24 @@ config CPU_PXA310
 config CPU_PXA320
 	bool "PXA320 (codename Monahans-P)"
 
+config CPU_PXA930
+	bool "PXA930 (codename Tavor-P)"
+
 endmenu
 
 endif
 
-menu "Select target boards"
-
 config ARCH_GUMSTIX
 	bool "Gumstix XScale boards"
 	help
 	  Say Y here if you intend to run this kernel on a
 	  Gumstix Full Function Minature Computer.
 
+config MACH_GUMSTIX_F
+	bool "Basix, Connex, ws-200ax, ws-400ax systems"
+	depends on ARCH_GUMSTIX
+	select PXA25x
+
 config ARCH_LUBBOCK
 	bool "Intel DBPXA250 Development Platform"
 	select PXA25x
@@ -58,6 +64,57 @@ config PXA_SHARPSL
 	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 	  handheld computer.
 
+config MACH_POODLE
+	bool "Enable Sharp SL-5600 (Poodle) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select SHARP_LOCOMO
+	select PXA_SSP
+
+config MACH_CORGI
+	bool "Enable Sharp SL-C700 (Corgi) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
+
+config MACH_SHEPHERD
+	bool "Enable Sharp SL-C750 (Shepherd) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
+
+config MACH_HUSKY
+	bool "Enable Sharp SL-C760 (Husky) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
+
+config MACH_AKITA
+	bool "Enable Sharp SL-1000 (Akita) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
+	select MACH_SPITZ
+	select I2C
+	select I2C_PXA
+
+config MACH_SPITZ
+	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
+
+config MACH_BORZOI
+	bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
+
+config MACH_TOSA
+	bool "Enable Sharp SL-6000x (Tosa) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+
 config ARCH_PXA_ESERIES
 	bool "PXA based Toshiba e-series PDAs"
 	select PXA25x
@@ -70,10 +127,19 @@ config MACH_E330
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e330 family PDA.
 
+config MACH_E350
+	bool "Toshiba e350"
+	default y
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e350 family PDA.
+
 config MACH_E740
 	bool "Toshiba e740"
 	default y
 	depends on ARCH_PXA_ESERIES
+	select FB_W100
 	help
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e740 family PDA.
@@ -82,6 +148,7 @@ config MACH_E750
 	bool "Toshiba e750"
 	default y
 	depends on ARCH_PXA_ESERIES
+	select FB_W100
 	help
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e750 family PDA.
@@ -98,6 +165,7 @@ config MACH_E800
 	bool "Toshiba e800"
 	default y
 	depends on ARCH_PXA_ESERIES
+	select FB_W100
 	help
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e800 family PDA.
@@ -106,6 +174,10 @@ config MACH_TRIZEPS4
 	bool "Keith und Koep Trizeps4 DIMM-Module"
 	select PXA27x
 
+config MACH_TRIZEPS4_CONXS
+	bool "ConXS Eval Board"
+	depends on MACH_TRIZEPS4
+
 config MACH_EM_X270
 	bool "CompuLab EM-x270 platform"
 	select PXA27x
@@ -115,7 +187,7 @@ config MACH_COLIBRI
 	select PXA27x
 
 config MACH_ZYLONITE
-	bool "PXA3xx Development Platform"
+	bool "PXA3xx Development Platform (aka Zylonite)"
 	select PXA3xx
 	select HAVE_PWM
 
@@ -124,6 +196,16 @@ config MACH_LITTLETON
 	select PXA3xx
 	select PXA_SSP
 
+config MACH_TAVOREVB
+	bool "PXA930 Evaluation Board (aka TavorEVB)"
+	select PXA3xx
+	select PXA930
+
+config MACH_SAAR
+	bool "PXA930 Handheld Platform (aka SAAR)"
+	select PXA3xx
+	select PXA930
+
 config MACH_ARMCORE
 	bool "CompuLab CM-X270 modules"
 	select PXA27x
@@ -131,7 +213,6 @@ config MACH_ARMCORE
 
 config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
-	depends on ARCH_PXA
 	select PXA27x
 	select IWMMXT
 
@@ -139,18 +220,26 @@ config MACH_PCM027
 	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 	select PXA27x
 	select IWMMXT
+	select PXA_SSP
 
-endmenu
+config ARCH_PXA_PALM
+	bool "PXA based Palm PDAs"
+	select HAVE_PWM
 
-choice
-	prompt "Used baseboard"
-	depends on MACH_PCM027
+config MACH_PALMTX
+	bool "Palm T|X"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on a Palm T|X
+	  handheld computer.
 
 config MACH_PCM990_BASEBOARD
 	bool "PHYTEC PCM-990 development board"
 	select HAVE_PWM
-
-endchoice
+	depends on MACH_PCM027
 
 choice
 	prompt "display on pcm990"
@@ -167,88 +256,45 @@ config PCM990_DISPLAY_NONE
 
 endchoice
 
-if ARCH_GUMSTIX
-
-choice
-	prompt "Select target Gumstix board"
-
-config MACH_GUMSTIX_F
-	bool "Basix, Connex, ws-200ax, ws-400ax systems"
-	select PXA25x
-
-endchoice
-
-endif
 
+config PXA_EZX
+	bool "Motorola EZX Platform"
+	select PXA27x
+	select IWMMXT
+	select HAVE_PWM
 
-if MACH_TRIZEPS4
+config MACH_EZX_A780
+	bool "Motorola EZX A780"
+	default y
+	depends on PXA_EZX
 
-choice
-	prompt "Select base board for Trizeps 4 module"
+config MACH_EZX_E680
+	bool "Motorola EZX E680"
+	default y
+	depends on PXA_EZX
 
-config MACH_TRIZEPS4_CONXS
-	bool "ConXS Eval Board"
+config MACH_EZX_A1200
+	bool "Motorola EZX A1200"
+	default y
+	depends on PXA_EZX
 
-config MACH_TRIZEPS4_ANY
-	bool "another Board"
+config MACH_EZX_A910
+	bool "Motorola EZX A910"
+	default y
+	depends on PXA_EZX
 
-endchoice
+config MACH_EZX_E6
+	bool "Motorola EZX E6"
+	default y
+	depends on PXA_EZX
 
-endif
+config MACH_EZX_E2
+	bool "Motorola EZX E2"
+	default y
+	depends on PXA_EZX
 
 endmenu
 
-config MACH_POODLE
-	bool "Enable Sharp SL-5600 (Poodle) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select SHARP_LOCOMO
-	select PXA_SSP
-
-config MACH_CORGI
-	bool "Enable Sharp SL-C700 (Corgi) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_SHEPHERD
-	bool "Enable Sharp SL-C750 (Shepherd) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_HUSKY
-	bool "Enable Sharp SL-C760 (Husky) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_AKITA
-	bool "Enable Sharp SL-1000 (Akita) Support"
-	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-	select MACH_SPITZ
-	select I2C
-	select I2C_PXA
-
-config MACH_SPITZ
-	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
-	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-
-config MACH_BORZOI
-	bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
-	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-
-config MACH_TOSA
-	bool "Enable Sharp SL-6000x (Tosa) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-
 config PXA25x
 	bool
 	help
@@ -288,4 +334,13 @@ config PXA_PWM
 	default BACKLIGHT_PWM
 	help
 	  Enable support for PXA2xx/PXA3xx PWM controllers
+
+config TOSA_BT
+	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
+	depends on MACH_TOSA
+	select RFKILL
+	help
+	  This is a simple driver that is able to control
+	  the state of built in bluetooth chip on tosa.
+
 endif

arch/arm/mach-pxa/Makefile

@@ -4,7 +4,7 @@
 
 # Common support (must be linked before board specific support)
 obj-y				+= clock.o devices.o generic.o irq.o dma.o \
-				   time.o gpio.o
+				   time.o gpio.o reset.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
 obj-$(CONFIG_CPU_FREQ)		+= cpu-pxa.o
 
@@ -18,6 +18,7 @@ obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o pxa2xx.o pxa27x.o
 obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o pxa3xx.o smemc.o
 obj-$(CONFIG_CPU_PXA300)	+= pxa300.o
 obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
+obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
 
 # Specific board support
 obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
@@ -36,7 +37,12 @@ obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
 obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
 obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
-obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
+obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o eseries_udc.o
+obj-$(CONFIG_MACH_E740)		+= e740_lcd.o
+obj-$(CONFIG_MACH_E750)		+= e750_lcd.o
+obj-$(CONFIG_MACH_E400)		+= e400_lcd.o
+obj-$(CONFIG_MACH_E800)		+= e800_lcd.o
+obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
 
 ifeq ($(CONFIG_MACH_ZYLONITE),y)
   obj-y				+= zylonite.o
@@ -44,8 +50,11 @@ ifeq ($(CONFIG_MACH_ZYLONITE),y)
   obj-$(CONFIG_CPU_PXA320)	+= zylonite_pxa320.o
 endif
 obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
+obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
+obj-$(CONFIG_MACH_SAAR)		+= saar.o
 
 obj-$(CONFIG_MACH_ARMCORE)      += cm-x270.o
+obj-$(CONFIG_PXA_EZX)           += ezx.o
 
 # Support for blinky lights
 led-y := leds.o
@@ -59,3 +68,5 @@ obj-$(CONFIG_LEDS)		+= $(led-y)
 ifeq ($(CONFIG_PCI),y)
 obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
 endif
+
+obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o

arch/arm/mach-pxa/clock.c

@@ -101,21 +101,6 @@ unsigned long clk_get_rate(struct clk *clk)
 EXPORT_SYMBOL(clk_get_rate);
 
 
-static void clk_gpio27_enable(struct clk *clk)
-{
-	pxa_gpio_mode(GPIO11_3_6MHz_MD);
-}
-
-static void clk_gpio27_disable(struct clk *clk)
-{
-}
-
-static const struct clkops clk_gpio27_ops = {
-	.enable		= clk_gpio27_enable,
-	.disable	= clk_gpio27_disable,
-};
-
-
 void clk_cken_enable(struct clk *clk)
 {
 	CKEN |= 1 << clk->cken;
@@ -131,14 +116,6 @@ const struct clkops clk_cken_ops = {
 	.disable	= clk_cken_disable,
 };
 
-static struct clk common_clks[] = {
-	{
-		.name		= "GPIO27_CLK",
-		.ops		= &clk_gpio27_ops,
-		.rate		= 3686400,
-	},
-};
-
 void clks_register(struct clk *clks, size_t num)
 {
 	int i;
@@ -148,10 +125,3 @@ void clks_register(struct clk *clks, size_t num)
 		list_add(&clks[i].node, &clocks);
 	mutex_unlock(&clocks_mutex);
 }
-
-static int __init clk_init(void)
-{
-	clks_register(common_clks, ARRAY_SIZE(common_clks));
-	return 0;
-}
-arch_initcall(clk_init);

arch/arm/mach-pxa/clock.h

@@ -47,9 +47,42 @@ struct clk {
 		.other	= _other,			\
 	}
 
+#define INIT_CLK(_name, _ops, _rate, _delay, _dev)      \
+	{                                               \
+		.name   = _name,                        \
+		.dev    = _dev,                         \
+		.ops    = _ops,                         \
+		.rate   = _rate,                        \
+		.delay	= _delay,			\
+	}
+
 extern const struct clkops clk_cken_ops;
 
 void clk_cken_enable(struct clk *clk);
 void clk_cken_disable(struct clk *clk);
 
+#ifdef CONFIG_PXA3xx
+#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev)	\
+	{						\
+		.name	= _name,			\
+		.dev	= _dev,				\
+		.ops	= &clk_pxa3xx_cken_ops,		\
+		.rate	= _rate,			\
+		.cken	= CKEN_##_cken,			\
+		.delay	= _delay,			\
+	}
+
+#define PXA3xx_CK(_name, _cken, _ops, _dev)		\
+	{						\
+		.name	= _name,			\
+		.dev	= _dev,				\
+		.ops	= _ops,				\
+		.cken	= CKEN_##_cken,			\
+	}
+
+extern const struct clkops clk_pxa3xx_cken_ops;
+extern void clk_pxa3xx_cken_enable(struct clk *);
+extern void clk_pxa3xx_cken_disable(struct clk *);
+#endif
+
 void clks_register(struct clk *clks, size_t num);

arch/arm/mach-pxa/cm-x270-pci.c

@@ -5,7 +5,7 @@
  *
  * Bits taken from various places.
  *
- * Copyright (C) 2007 Compulab, Ltd.
+ * Copyright (C) 2007, 2008 Compulab, Ltd.
  * Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -19,16 +19,16 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
 
 #include <asm/mach/pci.h>
-#include <asm/arch/cm-x270.h>
 #include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/mach-types.h>
 
 #include <asm/hardware/it8152.h>
 
-unsigned long it8152_base_address = CMX270_IT8152_VIRT;
+unsigned long it8152_base_address;
+static int cmx270_it8152_irq_gpio;
 
 /*
  * Only first 64MB of memory can be accessed via PCI.
@@ -42,7 +42,7 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
 	unsigned int sz = SZ_64M >> PAGE_SHIFT;
 
 	if (machine_is_armcore()) {
-		pr_info("Adjusting zones for CM-x270\n");
+		pr_info("Adjusting zones for CM-X270\n");
 
 		/*
 		 * Only adjust if > 64M on current system
@@ -60,19 +60,20 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
 static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
 	/* clear our parent irq */
-	GEDR(GPIO_IT8152_IRQ) = GPIO_bit(GPIO_IT8152_IRQ);
+	GEDR(cmx270_it8152_irq_gpio) = GPIO_bit(cmx270_it8152_irq_gpio);
 
 	it8152_irq_demux(irq, desc);
 }
 
-void __cmx270_pci_init_irq(void)
+void __cmx270_pci_init_irq(int irq_gpio)
 {
 	it8152_init_irq();
-	pxa_gpio_mode(IRQ_TO_GPIO(GPIO_IT8152_IRQ));
-	set_irq_type(IRQ_GPIO(GPIO_IT8152_IRQ), IRQT_RISING);
 
-	set_irq_chained_handler(IRQ_GPIO(GPIO_IT8152_IRQ),
-				cmx270_it8152_irq_demux);
+	cmx270_it8152_irq_gpio = irq_gpio;
+
+	set_irq_type(gpio_to_irq(irq_gpio), IRQT_RISING);
+
+	set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux);
 }
 
 #ifdef CONFIG_PM
@@ -115,8 +116,8 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 
 	/*
 	  Here comes the ugly part. The routing is baseboard specific,
-	  but defining a platform for each possible base of CM-x270 is
-	  unrealistic. Here we keep mapping for ATXBase and SB-x270.
+	  but defining a platform for each possible base of CM-X270 is
+	  unrealistic. Here we keep mapping for ATXBase and SB-X270.
 	*/
 	/* ATXBASE PCI slot */
 	if (slot == 7)

arch/arm/mach-pxa/cm-x270-pci.h

-extern void __cmx270_pci_init_irq(void);
+extern void __cmx270_pci_init_irq(int irq_gpio);
 extern void __cmx270_pci_suspend(void);
 extern void __cmx270_pci_resume(void);
 
 #ifdef CONFIG_PCI
-#define cmx270_pci_init_irq __cmx270_pci_init_irq
-#define cmx270_pci_suspend __cmx270_pci_suspend
-#define cmx270_pci_resume __cmx270_pci_resume
+#define cmx270_pci_init_irq(x) __cmx270_pci_init_irq(x)
+#define cmx270_pci_suspend(x) __cmx270_pci_suspend(x)
+#define cmx270_pci_resume(x) __cmx270_pci_resume(x)
 #else
-#define cmx270_pci_init_irq() do {} while (0)
-#define cmx270_pci_suspend() do {} while (0)
-#define cmx270_pci_resume() do {} while (0)
+#define cmx270_pci_init_irq(x) do {} while (0)
+#define cmx270_pci_suspend(x) do {} while (0)
+#define cmx270_pci_resume(x) do {} while (0)
 #endif

arch/arm/mach-pxa/cm-x270.c

 /*
  * linux/arch/arm/mach-pxa/cm-x270.c
  *
- * Copyright (C) 2007 CompuLab, Ltd.
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
  * Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -9,44 +9,156 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/types.h>
-#include <linux/pm.h>
-#include <linux/fb.h>
 #include <linux/platform_device.h>
-#include <linux/irq.h>
 #include <linux/sysdev.h>
-#include <linux/io.h>
-#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
 
 #include <linux/dm9000.h>
 #include <linux/rtc-v3020.h>
-#include <linux/serial_8250.h>
-
 #include <video/mbxfb.h>
+#include <linux/leds.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <asm/arch/mfp-pxa27x.h>
+#include <asm/arch/pxa-regs.h>
 #include <asm/arch/audio.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/bitfield.h>
-#include <asm/arch/cm-x270.h>
 
 #include <asm/hardware/it8152.h>
 
 #include "generic.h"
 #include "cm-x270-pci.h"
 
+/* virtual addresses for statically mapped regions */
+#define CMX270_VIRT_BASE	(0xe8000000)
+#define CMX270_IT8152_VIRT	(CMX270_VIRT_BASE)
+
 #define RTC_PHYS_BASE		(PXA_CS1_PHYS + (5 << 22))
 #define DM9000_PHYS_BASE	(PXA_CS1_PHYS + (6 << 22))
 
-static struct resource cmx270_dm9k_resource[] = {
+/* GPIO IRQ usage */
+#define GPIO10_ETHIRQ		(10)
+#define GPIO22_IT8152_IRQ	(22)
+#define GPIO83_MMC_IRQ		(83)
+#define GPIO95_GFXIRQ		(95)
+
+#define CMX270_ETHIRQ		IRQ_GPIO(GPIO10_ETHIRQ)
+#define CMX270_IT8152_IRQ	IRQ_GPIO(GPIO22_IT8152_IRQ)
+#define CMX270_MMC_IRQ		IRQ_GPIO(GPIO83_MMC_IRQ)
+#define CMX270_GFXIRQ		IRQ_GPIO(GPIO95_GFXIRQ)
+
+/* MMC power enable */
+#define GPIO105_MMC_POWER	(105)
+
+static unsigned long cmx270_pin_config[] = {
+	/* AC'97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO98_AC97_SYSCLK,
+	GPIO113_AC97_nRESET,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* MCI controller */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* SSP1 */
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+
+	/* SSP2 */
+	GPIO19_SSP2_SCLK,
+	GPIO14_SSP2_SFRM,
+	GPIO87_SSP2_TXD,
+	GPIO88_SSP2_RXD,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* SDRAM and local bus */
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+	GPIO33_nCS_5,
+	GPIO49_nPWE,
+	GPIO18_RDY,
+
+	/* GPIO */
+	GPIO0_GPIO	| WAKEUP_ON_EDGE_BOTH,
+	GPIO105_GPIO	| MFP_LPM_DRIVE_HIGH,	/* MMC/SD power */
+	GPIO53_GPIO,				/* PC card reset */
+
+	/* NAND controls */
+	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
+	GPIO89_GPIO,				/* NAND Ready/Busy */
+
+	/* interrupts */
+	GPIO10_GPIO,	/* DM9000 interrupt */
+	GPIO83_GPIO,	/* MMC card detect */
+};
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource cmx270_dm9000_resource[] = {
 	[0] = {
 		.start = DM9000_PHYS_BASE,
 		.end   = DM9000_PHYS_BASE + 4,
@@ -64,31 +176,45 @@ static struct resource cmx270_dm9k_resource[] = {
 	}
 };
 
-/* for the moment we limit ourselves to 32bit IO until some
- * better IO routines can be written and tested
- */
-static struct dm9000_plat_data cmx270_dm9k_platdata = {
+static struct dm9000_plat_data cmx270_dm9000_platdata = {
 	.flags		= DM9000_PLATF_32BITONLY,
 };
 
-/* Ethernet device */
-static struct platform_device cmx270_device_dm9k = {
+static struct platform_device cmx270_dm9000_device = {
 	.name		= "dm9000",
 	.id		= 0,
-	.num_resources	= ARRAY_SIZE(cmx270_dm9k_resource),
-	.resource	= cmx270_dm9k_resource,
+	.num_resources	= ARRAY_SIZE(cmx270_dm9000_resource),
+	.resource	= cmx270_dm9000_resource,
 	.dev		= {
-		.platform_data = &cmx270_dm9k_platdata,
+		.platform_data = &cmx270_dm9000_platdata,
 	}
 };
 
-/* touchscreen controller */
+static void __init cmx270_init_dm9000(void)
+{
+	platform_device_register(&cmx270_dm9000_device);
+}
+#else
+static inline void cmx270_init_dm9000(void) {}
+#endif
+
+/* UCB1400 touchscreen controller */
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
 static struct platform_device cmx270_ts_device = {
 	.name		= "ucb1400_ts",
 	.id		= -1,
 };
 
-/* RTC */
+static void __init cmx270_init_touchscreen(void)
+{
+	platform_device_register(&cmx270_ts_device);
+}
+#else
+static inline void cmx270_init_touchscreen(void) {}
+#endif
+
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 static struct resource cmx270_v3020_resource[] = {
 	[0] = {
 		.start = RTC_PHYS_BASE,
@@ -111,28 +237,67 @@ static struct platform_device cmx270_rtc_device = {
 	}
 };
 
-/*
- * CM-X270 LEDs
- */
+static void __init cmx270_init_rtc(void)
+{
+	platform_device_register(&cmx270_rtc_device);
+}
+#else
+static inline void cmx270_init_rtc(void) {}
+#endif
+
+/* CM-X270 LEDs */
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led cmx270_leds[] = {
+	[0] = {
+		.name = "cm-x270:red",
+		.default_trigger = "nand-disk",
+		.gpio = 93,
+		.active_low = 1,
+	},
+	[1] = {
+		.name = "cm-x270:green",
+		.default_trigger = "heartbeat",
+		.gpio = 94,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data cmx270_gpio_led_pdata = {
+	.num_leds = ARRAY_SIZE(cmx270_leds),
+	.leds = cmx270_leds,
+};
+
 static struct platform_device cmx270_led_device = {
-	.name		= "cm-x270-led",
+	.name		= "leds-gpio",
 	.id		= -1,
+	.dev		= {
+		.platform_data = &cmx270_gpio_led_pdata,
+	},
 };
 
+static void __init cmx270_init_leds(void)
+{
+	platform_device_register(&cmx270_led_device);
+}
+#else
+static inline void cmx270_init_leds(void) {}
+#endif
+
 /* 2700G graphics */
+#if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE)
 static u64 fb_dma_mask = ~(u64)0;
 
 static struct resource cmx270_2700G_resource[] = {
 	/* frame buffer memory including ODFB and External SDRAM */
 	[0] = {
-		.start = MARATHON_PHYS,
-		.end   = MARATHON_PHYS + 0x02000000,
+		.start = PXA_CS2_PHYS,
+		.end   = PXA_CS2_PHYS + 0x01ffffff,
 		.flags = IORESOURCE_MEM,
 	},
 	/* Marathon registers */
 	[1] = {
-		.start = MARATHON_PHYS + 0x03fe0000,
-		.end   = MARATHON_PHYS + 0x03ffffff,
+		.start = PXA_CS2_PHYS + 0x03fe0000,
+		.end   = PXA_CS2_PHYS + 0x03ffffff,
 		.flags = IORESOURCE_MEM,
 	},
 };
@@ -200,43 +365,15 @@ static struct platform_device cmx270_2700G = {
 	.id		= -1,
 };
 
-static u64 ata_dma_mask = ~(u64)0;
-
-static struct platform_device cmx270_ata = {
-	.name = "pata_cm_x270",
-	.id = -1,
-	.dev		= {
-		.dma_mask	= &ata_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-/* platform devices */
-static struct platform_device *platform_devices[] __initdata = {
-	&cmx270_device_dm9k,
-	&cmx270_rtc_device,
-	&cmx270_2700G,
-	&cmx270_led_device,
-	&cmx270_ts_device,
-	&cmx270_ata,
-};
-
-/* Map PCI companion and IDE/General Purpose CS statically */
-static struct map_desc cmx270_io_desc[] __initdata = {
-	[0] = { /* IDE/general purpose space */
-		.virtual	= CMX270_IDE104_VIRT,
-		.pfn		= __phys_to_pfn(CMX270_IDE104_PHYS),
-		.length		= SZ_64M - SZ_8M,
-		.type		= MT_DEVICE
-	},
-	[1] = { /* PCI bridge */
-		.virtual	= CMX270_IT8152_VIRT,
-		.pfn		= __phys_to_pfn(CMX270_IT8152_PHYS),
-		.length		= SZ_64M,
-		.type		= MT_DEVICE
-	},
-};
+static void __init cmx270_init_2700G(void)
+{
+	platform_device_register(&cmx270_2700G);
+}
+#else
+static inline void cmx270_init_2700G(void) {}
+#endif
 
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 /*
   Display definitions
   keep these for backwards compatibility, although symbolic names (as
@@ -446,7 +583,16 @@ static int __init cmx270_set_display(char *str)
 */
 __setup("monitor=", cmx270_set_display);
 
+static void __init cmx270_init_display(void)
+{
+	set_pxa_fb_info(cmx270_display);
+}
+#else
+static inline void cmx270_init_display(void) {}
+#endif
+
 /* PXA27x OHCI controller setup */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int cmx270_ohci_init(struct device *dev)
 {
 	/* Set the Power Control Polarity Low */
@@ -461,35 +607,37 @@ static struct pxaohci_platform_data cmx270_ohci_platform_data = {
 	.init		= cmx270_ohci_init,
 };
 
+static void __init cmx270_init_ohci(void)
+{
+	pxa_set_ohci_info(&cmx270_ohci_platform_data);
+}
+#else
+static inline void cmx270_init_ohci(void) {}
+#endif
 
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
 static int cmx270_mci_init(struct device *dev,
 			   irq_handler_t cmx270_detect_int,
 			   void *data)
 {
 	int err;
 
-	/*
-	 * setup GPIO for PXA27x MMC controller
-	 */
-	pxa_gpio_mode(GPIO32_MMCCLK_MD);
-	pxa_gpio_mode(GPIO112_MMCCMD_MD);
-	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
-	/* SB-X270 uses GPIO105 as SD power enable */
-	pxa_gpio_mode(105 | GPIO_OUT);
+	err = gpio_request(GPIO105_MMC_POWER, "MMC/SD power");
+	if (err) {
+		dev_warn(dev, "power gpio unavailable\n");
+		return err;
+	}
 
-	/* card detect IRQ on GPIO 83 */
-	pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ));
+	gpio_direction_output(GPIO105_MMC_POWER, 0);
 
 	err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
 			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
 			  "MMC card detect", data);
-	if (err)
-		printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't"
-		       " request MMC card detect IRQ\n");
+	if (err) {
+		gpio_free(GPIO105_MMC_POWER);
+		dev_err(dev, "cmx270_mci_init: MMC/SD: can't"
+			" request MMC card detect IRQ\n");
+	}
 
 	return err;
 }
@@ -499,17 +647,18 @@ static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
 	struct pxamci_platform_data *p_d = dev->platform_data;
 
 	if ((1 << vdd) & p_d->ocr_mask) {
-		printk(KERN_DEBUG "%s: on\n", __func__);
-		GPCR(105) = GPIO_bit(105);
+		dev_dbg(dev, "power on\n");
+		gpio_set_value(GPIO105_MMC_POWER, 0);
 	} else {
-		GPSR(105) = GPIO_bit(105);
-		printk(KERN_DEBUG "%s: off\n", __func__);
+		gpio_set_value(GPIO105_MMC_POWER, 1);
+		dev_dbg(dev, "power off\n");
 	}
 }
 
 static void cmx270_mci_exit(struct device *dev, void *data)
 {
 	free_irq(CMX270_MMC_IRQ, data);
+	gpio_free(GPIO105_MMC_POWER);
 }
 
 static struct pxamci_platform_data cmx270_mci_platform_data = {
@@ -519,6 +668,14 @@ static struct pxamci_platform_data cmx270_mci_platform_data = {
 	.exit		= cmx270_mci_exit,
 };
 
+static void __init cmx270_init_mmc(void)
+{
+	pxa_set_mci_info(&cmx270_mci_platform_data);
+}
+#else
+static inline void cmx270_init_mmc(void) {}
+#endif
+
 #ifdef CONFIG_PM
 static unsigned long sleep_save_msc[10];
 
@@ -580,53 +737,63 @@ static int __init cmx270_pm_init(void)
 static int __init cmx270_pm_init(void) { return 0; }
 #endif
 
-static void __init cmx270_init(void)
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init cmx270_init_ac97(void)
 {
-	cmx270_pm_init();
-
-	set_pxa_fb_info(cmx270_display);
-
-	/* register CM-X270 platform devices */
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void cmx270_init_ac97(void) {}
+#endif
 
-	/* set MCI and OHCI platform parameters */
-	pxa_set_mci_info(&cmx270_mci_platform_data);
-	pxa_set_ohci_info(&cmx270_ohci_platform_data);
-
-	/* This enables the STUART */
-	pxa_gpio_mode(GPIO46_STRXD_MD);
-	pxa_gpio_mode(GPIO47_STTXD_MD);
+static void __init cmx270_init(void)
+{
+	cmx270_pm_init();
 
-	/* This enables the BTUART  */
-	pxa_gpio_mode(GPIO42_BTRXD_MD);
-	pxa_gpio_mode(GPIO43_BTTXD_MD);
-	pxa_gpio_mode(GPIO44_BTCTS_MD);
-	pxa_gpio_mode(GPIO45_BTRTS_MD);
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
+
+	cmx270_init_dm9000();
+	cmx270_init_rtc();
+	cmx270_init_display();
+	cmx270_init_mmc();
+	cmx270_init_ohci();
+	cmx270_init_ac97();
+	cmx270_init_touchscreen();
+	cmx270_init_leds();
+	cmx270_init_2700G();
 }
 
 static void __init cmx270_init_irq(void)
 {
 	pxa27x_init_irq();
 
+	cmx270_pci_init_irq(GPIO22_IT8152_IRQ);
+}
 
-	cmx270_pci_init_irq();
+#ifdef CONFIG_PCI
+/* Map PCI companion statically */
+static struct map_desc cmx270_io_desc[] __initdata = {
+	[0] = { /* PCI bridge */
+		.virtual	= CMX270_IT8152_VIRT,
+		.pfn		= __phys_to_pfn(PXA_CS4_PHYS),
+		.length		= SZ_64M,
+		.type		= MT_DEVICE
+	},
+};
 
-	/* Setup interrupt for dm9000 */
-	pxa_gpio_mode(IRQ_TO_GPIO(CMX270_ETHIRQ));
-	set_irq_type(CMX270_ETHIRQ, IRQT_RISING);
+static void __init cmx270_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
 
-	/* Setup interrupt for 2700G */
-	pxa_gpio_mode(IRQ_TO_GPIO(CMX270_GFXIRQ));
-	set_irq_type(CMX270_GFXIRQ, IRQT_FALLING);
+	it8152_base_address = CMX270_IT8152_VIRT;
 }
-
+#else
 static void __init cmx270_map_io(void)
 {
 	pxa_map_io();
-	iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
 }
-
+#endif
 
 MACHINE_START(ARMCORE, "Compulab CM-x270")
 	.boot_params	= 0xa0000100,

arch/arm/mach-pxa/corgi.c

@@ -465,6 +465,7 @@ static void corgi_irda_transceiver_mode(struct device *dev, int mode)
 		GPSR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
 	else
 		GPCR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
+	pxa2xx_transceiver_mode(dev, mode);
 }
 
 static struct pxaficp_platform_data corgi_ficp_platform_data = {

arch/arm/mach-pxa/devices.c

@@ -13,8 +13,10 @@
 #include <asm/arch/mfp-pxa27x.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/pxa2xx_spi.h>
 #include <asm/arch/camera.h>
 #include <asm/arch/audio.h>
+#include <asm/arch/pxa3xx_nand.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -830,4 +832,63 @@ void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
 	pxa_register_device(&pxa3xx_device_mci3, info);
 }
 
+static struct resource pxa3xx_resources_nand[] = {
+	[0] = {
+		.start	= 0x43100000,
+		.end	= 0x43100053,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_NAND,
+		.end	= IRQ_NAND,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* DRCMR for Data DMA */
+		.start	= 97,
+		.end	= 97,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		/* DRCMR for Command DMA */
+		.start	= 99,
+		.end	= 99,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static u64 pxa3xx_nand_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device pxa3xx_device_nand = {
+	.name		= "pxa3xx-nand",
+	.id		= -1,
+	.dev		= {
+		.dma_mask = &pxa3xx_nand_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(pxa3xx_resources_nand),
+	.resource	= pxa3xx_resources_nand,
+};
+
+void __init pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info)
+{
+	pxa_register_device(&pxa3xx_device_nand, info);
+}
 #endif /* CONFIG_PXA3xx */
+
+/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
+ * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
+void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
+{
+	struct platform_device *pd;
+
+	pd = platform_device_alloc("pxa2xx-spi", id);
+	if (pd == NULL) {
+		printk(KERN_ERR "pxa2xx-spi: failed to allocate device id %d\n",
+		       id);
+		return;
+	}
+
+	pd->dev.platform_data = info;
+	platform_device_add(pd);
+}

arch/arm/mach-pxa/devices.h

@@ -31,4 +31,6 @@ extern struct platform_device pxa25x_device_pwm1;
 extern struct platform_device pxa27x_device_pwm0;
 extern struct platform_device pxa27x_device_pwm1;
 
+extern struct platform_device pxa3xx_device_nand;
+
 void __init pxa_register_device(struct platform_device *dev, void *data);

arch/arm/mach-pxa/e400_lcd.c

+/*
+ * e400_lcd.c
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mach-types.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxafb.h>
+
+static struct pxafb_mode_info e400_pxafb_mode_info = {
+	.pixclock       = 140703,
+	.xres           = 240,
+	.yres           = 320,
+	.bpp            = 16,
+	.hsync_len      = 4,
+	.left_margin    = 28,
+	.right_margin   = 8,
+	.vsync_len      = 3,
+	.upper_margin   = 5,
+	.lower_margin   = 6,
+	.sync           = 0,
+};
+
+static struct pxafb_mach_info e400_pxafb_mach_info = {
+	.modes          = &e400_pxafb_mode_info,
+	.num_modes      = 1,
+	.lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3          = 0,
+	.pxafb_backlight_power  = NULL,
+};
+
+static int __init e400_lcd_init(void)
+{
+	if (!machine_is_e400())
+		return -ENODEV;
+
+	set_pxa_fb_info(&e400_pxafb_mach_info);
+	return 0;
+}
+
+module_init(e400_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e400 lcd driver");
+MODULE_LICENSE("GPLv2");
+

arch/arm/mach-pxa/e740_lcd.c

+/* e740_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+/*
+**potential** shutdown routine - to be investigated
+devmem2 0x0c010528 w 0xff3fff00
+devmem2 0x0c010190 w 0x7FFF8000
+devmem2 0x0c0101b0 w 0x00FF0000
+devmem2 0x0c01008c w 0x00000000
+devmem2 0x0c010080 w 0x000000bf
+devmem2 0x0c010098 w 0x00000015
+devmem2 0x0c010088 w 0x4b000204
+devmem2 0x0c010098 w 0x0000001d
+*/
+
+static struct w100_gen_regs e740_lcd_regs = {
+	.lcd_format =            0x00008023,
+	.lcdd_cntl1 =            0x0f000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00ffff03,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e740_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 20,
+	.right_margin    = 28,
+	.upper_margin    = 9,
+	.lower_margin    = 8,
+	.crtc_ss         = 0x80140013,
+	.crtc_ls         = 0x81150110,
+	.crtc_gs         = 0x80050005,
+	.crtc_vpos_gs    = 0x000a0009,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa906000a,
+	.crtc_gclk       = 0x80050108,
+	.crtc_goe        = 0x80050108,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+	.crtc_ps1_active =       0x41060010,
+};
+
+
+static struct w100_gpio_regs e740_w100_gpio_info = {
+	.init_data1 = 0x21002103,
+	.gpio_dir1  = 0xffffdeff,
+	.gpio_oe1   = 0x03c00643,
+	.init_data2 = 0x003f003f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000000ff,
+};
+
+static struct w100fb_mach_info e740_fb_info = {
+	.modelist   = &e740_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e740_lcd_regs,
+	.gpio       = &e740_w100_gpio_info,
+	.xtal_freq = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e740_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e740_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e740_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e740_fb_resources),
+	.resource       = e740_fb_resources,
+};
+
+static int e740_lcd_init(void)
+{
+	int ret;
+
+	if (!machine_is_e740())
+		return -ENODEV;
+
+	return platform_device_register(&e740_fb_device);
+}
+
+module_init(e740_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e740 lcd driver");
+MODULE_LICENSE("GPLv2");

arch/arm/mach-pxa/e750_lcd.c

+/* e750_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+static struct w100_gen_regs e750_lcd_regs = {
+	.lcd_format =            0x00008003,
+	.lcdd_cntl1 =            0x00000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00fff003,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e750_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 21,
+	.right_margin    = 22,
+	.upper_margin    = 5,
+	.lower_margin    = 4,
+	.crtc_ss         = 0x80150014,
+	.crtc_ls         = 0x8014000d,
+	.crtc_gs         = 0xc1000005,
+	.crtc_vpos_gs    = 0x00020147,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa1700030,
+	.crtc_gclk       = 0x80cc0015,
+	.crtc_goe        = 0x80cc0015,
+	.crtc_ps1_active = 0x61060017,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+};
+
+
+static struct w100_gpio_regs e750_w100_gpio_info = {
+	.init_data1 = 0x01192f1b,
+	.gpio_dir1  = 0xd5ffdeff,
+	.gpio_oe1   = 0x000020bf,
+	.init_data2 = 0x010f010f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000001cf,
+};
+
+static struct w100fb_mach_info e750_fb_info = {
+	.modelist   = &e750_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e750_lcd_regs,
+	.gpio       = &e750_w100_gpio_info,
+	.xtal_freq  = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e750_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e750_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e750_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e750_fb_resources),
+	.resource       = e750_fb_resources,
+};
+
+static int e750_lcd_init(void)
+{
+	if (!machine_is_e750())
+		return -ENODEV;
+
+	return platform_device_register(&e750_fb_device);
+}
+
+module_init(e750_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e750 lcd driver");
+MODULE_LICENSE("GPLv2");

arch/arm/mach-pxa/e800_lcd.c

+/* e800_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+static struct w100_gen_regs e800_lcd_regs = {
+	.lcd_format =            0x00008003,
+	.lcdd_cntl1 =            0x02a00000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x000ff2a3,
+	.genlcd_cntl2 =          0x000002a3,
+	.genlcd_cntl3 =          0x000102aa,
+};
+
+static struct w100_mode e800_lcd_mode[2] = {
+	[0] = {
+		.xres            = 480,
+		.yres            = 640,
+		.left_margin     = 52,
+		.right_margin    = 148,
+		.upper_margin    = 2,
+		.lower_margin    = 6,
+		.crtc_ss         = 0x80350034,
+		.crtc_ls         = 0x802b0026,
+		.crtc_gs         = 0x80160016,
+		.crtc_vpos_gs    = 0x00020003,
+		.crtc_rev        = 0x0040001d,
+		.crtc_dclk       = 0xe0000000,
+		.crtc_gclk       = 0x82a50049,
+		.crtc_goe        = 0x80ee001c,
+		.crtc_ps1_active = 0x00000000,
+		.pll_freq        = 128,
+		.pixclk_divider         = 4,
+		.pixclk_divider_rotated = 6,
+		.pixclk_src     = CLK_SRC_PLL,
+		.sysclk_divider  = 0,
+		.sysclk_src     = CLK_SRC_PLL,
+	},
+	[1] = {
+		.xres            = 240,
+		.yres            = 320,
+		.left_margin     = 15,
+		.right_margin    = 88,
+		.upper_margin    = 0,
+		.lower_margin    = 7,
+		.crtc_ss         = 0xd010000f,
+		.crtc_ls         = 0x80070003,
+		.crtc_gs         = 0x80000000,
+		.crtc_vpos_gs    = 0x01460147,
+		.crtc_rev        = 0x00400003,
+		.crtc_dclk       = 0xa1700030,
+		.crtc_gclk       = 0x814b0008,
+		.crtc_goe        = 0x80cc0015,
+		.crtc_ps1_active = 0x00000000,
+		.pll_freq        = 100,
+		.pixclk_divider         = 6, /* Wince uses 14 which gives a 7MHz pclk. */
+		.pixclk_divider_rotated = 6, /* we want a 14MHz one (much nicer to look at) */
+		.pixclk_src     = CLK_SRC_PLL,
+		.sysclk_divider  = 0,
+		.sysclk_src     = CLK_SRC_PLL,
+	}
+};
+
+
+static struct w100_gpio_regs e800_w100_gpio_info = {
+	.init_data1 = 0xc13fc019,
+	.gpio_dir1  = 0x3e40df7f,
+	.gpio_oe1   = 0x003c3000,
+	.init_data2 = 0x00000000,
+	.gpio_dir2  = 0x00000000,
+	.gpio_oe2   = 0x00000000,
+};
+
+static struct w100_mem_info e800_w100_mem_info = {
+	.ext_cntl        = 0x09640011,
+	.sdram_mode_reg  = 0x00600021,
+	.ext_timing_cntl = 0x10001545,
+	.io_cntl         = 0x7ddd7333,
+	.size            = 0x1fffff,
+};
+
+static void e800_tg_change(struct w100fb_par *par)
+{
+	unsigned long tmp;
+
+	tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
+	if (par->mode->xres == 480)
+		tmp |= 0x100;
+	else
+		tmp &= ~0x100;
+	w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
+}
+
+static struct w100_tg_info e800_tg_info = {
+	.change = e800_tg_change,
+};
+
+static struct w100fb_mach_info e800_fb_info = {
+	.modelist   = e800_lcd_mode,
+	.num_modes  = 2,
+	.regs       = &e800_lcd_regs,
+	.gpio       = &e800_w100_gpio_info,
+	.mem        = &e800_w100_mem_info,
+	.tg         = &e800_tg_info,
+	.xtal_freq  = 16000000,
+};
+
+static struct resource e800_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e800_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e800_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e800_fb_resources),
+	.resource       = e800_fb_resources,
+};
+
+static int e800_lcd_init(void)
+{
+	if (!machine_is_e800())
+		return -ENODEV;
+
+	return platform_device_register(&e800_fb_device);
+}
+
+module_init(e800_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e800 lcd driver");
+MODULE_LICENSE("GPLv2");

arch/arm/mach-pxa/em-x270.c

 /*
- * Support for CompuLab EM-x270 platform
+ * Support for CompuLab EM-X270 platform
  *
- * Copyright (C) 2007 CompuLab, Ltd.
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
  * Author: Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -14,31 +14,159 @@
 
 #include <linux/dm9000.h>
 #include <linux/rtc-v3020.h>
-
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
-
 #include <asm/mach/arch.h>
 
+#include <asm/arch/mfp-pxa27x.h>
 #include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/pxa27x-udc.h>
 #include <asm/arch/audio.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/mmc.h>
-#include <asm/arch/bitfield.h>
+#include <asm/arch/pxa27x_keypad.h>
 
 #include "generic.h"
 
 /* GPIO IRQ usage */
-#define EM_X270_MMC_PD		(105)
-#define EM_X270_ETHIRQ		IRQ_GPIO(41)
-#define EM_X270_MMC_IRQ		IRQ_GPIO(13)
+#define GPIO41_ETHIRQ		(41)
+#define GPIO13_MMC_CD		(13)
+#define EM_X270_ETHIRQ		IRQ_GPIO(GPIO41_ETHIRQ)
+#define EM_X270_MMC_CD		IRQ_GPIO(GPIO13_MMC_CD)
+
+/* NAND control GPIOs */
+#define GPIO11_NAND_CS	(11)
+#define GPIO56_NAND_RB	(56)
+
+static unsigned long em_x270_pin_config[] = {
+	/* AC'97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO98_AC97_SYSCLK,
+	GPIO113_AC97_nRESET,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* MCI controller */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* QCI */
+	GPIO84_CIF_FV,
+	GPIO25_CIF_LV,
+	GPIO53_CIF_MCLK,
+	GPIO54_CIF_PCLK,
+	GPIO81_CIF_DD_0,
+	GPIO55_CIF_DD_1,
+	GPIO51_CIF_DD_2,
+	GPIO50_CIF_DD_3,
+	GPIO52_CIF_DD_4,
+	GPIO48_CIF_DD_5,
+	GPIO17_CIF_DD_6,
+	GPIO12_CIF_DD_7,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* Keypad */
+	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO34_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO39_KP_MKIN_4	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO99_KP_MKIN_5	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO91_KP_MKIN_6	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO36_KP_MKIN_7	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+	GPIO108_KP_MKOUT_5,
+	GPIO96_KP_MKOUT_6,
+	GPIO22_KP_MKOUT_7,
+
+	/* SSP1 */
+	GPIO26_SSP1_RXD,
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO57_SSP1_TXD,
+
+	/* SSP2 */
+	GPIO19_SSP2_SCLK,
+	GPIO14_SSP2_SFRM,
+	GPIO89_SSP2_TXD,
+	GPIO88_SSP2_RXD,
+
+	/* SDRAM and local bus */
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+	GPIO49_nPWE,
+	GPIO18_RDY,
+
+	/* GPIO */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+	/* power controls */
+	GPIO20_GPIO	| MFP_LPM_DRIVE_LOW,	/* GPRS_PWEN */
+	GPIO115_GPIO	| MFP_LPM_DRIVE_LOW,	/* WLAN_PWEN */
+
+	/* NAND controls */
+	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
+	GPIO56_GPIO,				/* NAND Ready/Busy */
+
+	/* interrupts */
+	GPIO13_GPIO,	/* MMC card detect */
+	GPIO41_GPIO,	/* DM9000 interrupt */
+};
 
-static struct resource em_x270_dm9k_resource[] = {
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource em_x270_dm9000_resource[] = {
 	[0] = {
 		.start = PXA_CS2_PHYS,
 		.end   = PXA_CS2_PHYS + 3,
@@ -56,32 +184,30 @@ static struct resource em_x270_dm9k_resource[] = {
 	}
 };
 
-/* for the moment we limit ourselves to 32bit IO until some
- * better IO routines can be written and tested
- */
-static struct dm9000_plat_data em_x270_dm9k_platdata = {
+static struct dm9000_plat_data em_x270_dm9000_platdata = {
 	.flags		= DM9000_PLATF_32BITONLY,
 };
 
-/* Ethernet device */
-static struct platform_device em_x270_dm9k = {
+static struct platform_device em_x270_dm9000 = {
 	.name		= "dm9000",
 	.id		= 0,
-	.num_resources	= ARRAY_SIZE(em_x270_dm9k_resource),
-	.resource	= em_x270_dm9k_resource,
+	.num_resources	= ARRAY_SIZE(em_x270_dm9000_resource),
+	.resource	= em_x270_dm9000_resource,
 	.dev		= {
-		.platform_data = &em_x270_dm9k_platdata,
+		.platform_data = &em_x270_dm9000_platdata,
 	}
 };
 
-/* WM9712 touchscreen controller. Hopefully the driver will make it to
- * the mainstream sometime */
-static struct platform_device em_x270_ts = {
-	.name		= "wm97xx-ts",
-	.id		= -1,
-};
+static void __init em_x270_init_dm9000(void)
+{
+	platform_device_register(&em_x270_dm9000);
+}
+#else
+static inline void em_x270_init_dm9000(void) {}
+#endif
 
-/* RTC */
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 static struct resource em_x270_v3020_resource[] = {
 	[0] = {
 		.start = PXA_CS4_PHYS,
@@ -104,20 +230,26 @@ static struct platform_device em_x270_rtc = {
 	}
 };
 
-/* NAND flash */
-#define GPIO_NAND_CS	(11)
-#define GPIO_NAND_RB	(56)
+static void __init em_x270_init_rtc(void)
+{
+	platform_device_register(&em_x270_rtc);
+}
+#else
+static inline void em_x270_init_rtc(void) {}
+#endif
 
+/* NAND flash */
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 static inline void nand_cs_on(void)
 {
-	GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+	gpio_set_value(GPIO11_NAND_CS, 0);
 }
 
 static void nand_cs_off(void)
 {
 	dsb();
 
-	GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+	gpio_set_value(GPIO11_NAND_CS, 1);
 }
 
 /* hardware specific access to control-lines */
@@ -157,7 +289,7 @@ static int em_x270_nand_device_ready(struct mtd_info *mtd)
 {
 	dsb();
 
-	return GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB);
+	return gpio_get_value(GPIO56_NAND_RB);
 }
 
 static struct mtd_partition em_x270_partition_info[] = {
@@ -210,16 +342,35 @@ static struct platform_device em_x270_nand = {
 	}
 };
 
-/* platform devices */
-static struct platform_device *platform_devices[] __initdata = {
-	&em_x270_dm9k,
-	&em_x270_ts,
-	&em_x270_rtc,
-	&em_x270_nand,
-};
+static void __init em_x270_init_nand(void)
+{
+	int err;
 
+	err = gpio_request(GPIO11_NAND_CS, "NAND CS");
+	if (err) {
+		pr_warning("EM-X270: failed to request NAND CS gpio\n");
+		return;
+	}
+
+	gpio_direction_output(GPIO11_NAND_CS, 1);
+
+	err = gpio_request(GPIO56_NAND_RB, "NAND R/B");
+	if (err) {
+		pr_warning("EM-X270: failed to request NAND R/B gpio\n");
+		gpio_free(GPIO11_NAND_CS);
+		return;
+	}
+
+	gpio_direction_input(GPIO56_NAND_RB);
+
+	platform_device_register(&em_x270_nand);
+}
+#else
+static inline void em_x270_init_nand(void) {}
+#endif
 
 /* PXA27x OHCI controller setup */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int em_x270_ohci_init(struct device *dev)
 {
 	/* Set the Power Control Polarity Low */
@@ -237,27 +388,23 @@ static struct pxaohci_platform_data em_x270_ohci_platform_data = {
 	.init		= em_x270_ohci_init,
 };
 
+static void __init em_x270_init_ohci(void)
+{
+	pxa_set_ohci_info(&em_x270_ohci_platform_data);
+}
+#else
+static inline void em_x270_init_ohci(void) {}
+#endif
 
+/* MCI controller setup */
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
 static int em_x270_mci_init(struct device *dev,
 			    irq_handler_t em_x270_detect_int,
 			    void *data)
 {
-	int err;
-
-	/* setup GPIO for PXA27x MMC controller */
-	pxa_gpio_mode(GPIO32_MMCCLK_MD);
-	pxa_gpio_mode(GPIO112_MMCCMD_MD);
-	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
-	/* EM-X270 uses GPIO13 as SD power enable */
-	pxa_gpio_mode(EM_X270_MMC_PD | GPIO_OUT);
-
-	err = request_irq(EM_X270_MMC_IRQ, em_x270_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
+	int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int,
+			      IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			      "MMC card detect", data);
 	if (err) {
 		printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
 		       __func__, err);
@@ -279,7 +426,8 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
 
 static void em_x270_mci_exit(struct device *dev, void *data)
 {
-	free_irq(EM_X270_MMC_IRQ, data);
+	int irq = gpio_to_irq(GPIO13_MMC_CD);
+	free_irq(irq, data);
 }
 
 static struct pxamci_platform_data em_x270_mci_platform_data = {
@@ -289,7 +437,16 @@ static struct pxamci_platform_data em_x270_mci_platform_data = {
 	.exit		= em_x270_mci_exit,
 };
 
+static void __init em_x270_init_mmc(void)
+{
+	pxa_set_mci_info(&em_x270_mci_platform_data);
+}
+#else
+static inline void em_x270_init_mmc(void) {}
+#endif
+
 /* LCD 480x640 */
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct pxafb_mode_info em_x270_lcd_mode = {
 	.pixclock	= 50000,
 	.bpp		= 16,
@@ -307,40 +464,96 @@ static struct pxafb_mode_info em_x270_lcd_mode = {
 static struct pxafb_mach_info em_x270_lcd = {
 	.modes		= &em_x270_lcd_mode,
 	.num_modes	= 1,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.lccr0		= LCCR0_PAS,
-	.lccr3		= LCCR3_PixClkDiv(0x01) | LCCR3_Acb(0xff),
+	.lcd_conn	= LCD_COLOR_TFT_16BPP,
 };
-
-static void __init em_x270_init(void)
+static void __init em_x270_init_lcd(void)
 {
-	/* setup LCD */
 	set_pxa_fb_info(&em_x270_lcd);
+}
+#else
+static inline void em_x270_init_lcd(void) {}
+#endif
 
-	/* register EM-X270 platform devices */
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init em_x270_init_ac97(void)
+{
 	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void em_x270_init_ac97(void) {}
+#endif
+
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static unsigned int em_x270_matrix_keys[] = {
+	KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
+	KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
+	KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
+};
 
-	/* set MCI and OHCI platform parameters */
-	pxa_set_mci_info(&em_x270_mci_platform_data);
-	pxa_set_ohci_info(&em_x270_ohci_platform_data);
+struct pxa27x_keypad_platform_data em_x270_keypad_info = {
+	/* code map for the matrix keys */
+	.matrix_key_rows	= 3,
+	.matrix_key_cols	= 3,
+	.matrix_key_map		= em_x270_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(em_x270_matrix_keys),
+};
+
+static void __init em_x270_init_keypad(void)
+{
+	pxa_set_keypad_info(&em_x270_keypad_info);
+}
+#else
+static inline void em_x270_init_keypad(void) {}
+#endif
 
-	/* setup STUART GPIOs */
-	pxa_gpio_mode(GPIO46_STRXD_MD);
-	pxa_gpio_mode(GPIO47_STTXD_MD);
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button gpio_keys_button[] = {
+	[0] = {
+		.desc	= "sleep/wakeup",
+		.code	= KEY_SUSPEND,
+		.type	= EV_PWR,
+		.gpio	= 1,
+		.wakeup	= 1,
+	},
+};
 
-	/* setup BTUART GPIOs */
-	pxa_gpio_mode(GPIO42_BTRXD_MD);
-	pxa_gpio_mode(GPIO43_BTTXD_MD);
-	pxa_gpio_mode(GPIO44_BTCTS_MD);
-	pxa_gpio_mode(GPIO45_BTRTS_MD);
+static struct gpio_keys_platform_data em_x270_gpio_keys_data = {
+	.buttons	= gpio_keys_button,
+	.nbuttons	= 1,
+};
 
-	/* Setup interrupt for dm9000 */
-	set_irq_type(EM_X270_ETHIRQ, IRQT_RISING);
+static struct platform_device em_x270_gpio_keys = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &em_x270_gpio_keys_data,
+	},
+};
+
+static void __init em_x270_init_gpio_keys(void)
+{
+	platform_device_register(&em_x270_gpio_keys);
+}
+#else
+static inline void em_x270_init_gpio_keys(void) {}
+#endif
+
+static void __init em_x270_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
+
+	em_x270_init_dm9000();
+	em_x270_init_rtc();
+	em_x270_init_nand();
+	em_x270_init_lcd();
+	em_x270_init_mmc();
+	em_x270_init_ohci();
+	em_x270_init_keypad();
+	em_x270_init_gpio_keys();
+	em_x270_init_ac97();
 }
 
-MACHINE_START(EM_X270, "Compulab EM-x270")
+MACHINE_START(EM_X270, "Compulab EM-X270")
 	.boot_params	= 0xa0000100,
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,

arch/arm/mach-pxa/eseries.c

@@ -17,7 +17,7 @@
 #include <asm/arch/hardware.h>
 #include <asm/mach-types.h>
 
-#include <generic.h>
+#include "generic.h"
 
 /* Only e800 has 128MB RAM */
 static void __init eseries_fixup(struct machine_desc *desc,
@@ -47,6 +47,19 @@ MACHINE_START(E330, "Toshiba e330")
 MACHINE_END
 #endif
 
+#ifdef CONFIG_MACH_E350
+MACHINE_START(E350, "Toshiba e350")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa25x_init_irq,
+	.fixup          = eseries_fixup,
+	.timer = &pxa_timer,
+MACHINE_END
+#endif
+
 #ifdef CONFIG_MACH_E740
 MACHINE_START(E740, "Toshiba e740")
         /* Maintainer: Ian Molton (spyro@f2s.com) */

arch/arm/mach-pxa/eseries_udc.c

+/*
+ * UDC functions for the Toshiba e-series PDAs
+ *
+ * Copyright (c) Ian Molton 2003
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/arch/udc.h>
+#include <asm/arch/eseries-gpio.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/domain.h>
+
+/* local PXA generic code */
+#include "generic.h"
+
+static struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
+	.gpio_vbus   = GPIO_E7XX_USB_DISC,
+	.gpio_pullup = GPIO_E7XX_USB_PULLUP,
+	.gpio_pullup_inverted = 1
+};
+
+static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+	.gpio_vbus   = GPIO_E800_USB_DISC,
+	.gpio_pullup = GPIO_E800_USB_PULLUP,
+	.gpio_pullup_inverted = 1
+};
+
+static int __init eseries_udc_init(void)
+{
+	if (machine_is_e330() || machine_is_e350() ||
+	    machine_is_e740() || machine_is_e750() ||
+	    machine_is_e400())
+		pxa_set_udc_info(&e7xx_udc_mach_info);
+	else if (machine_is_e800())
+		pxa_set_udc_info(&e800_udc_mach_info);
+
+	return 0;
+}
+
+module_init(eseries_udc_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("eseries UDC support");
+MODULE_LICENSE("GPLv2");

arch/arm/mach-pxa/ezx.c

+/*
+ *  ezx.c - Common code for the EZX platform.
+ *
+ *  Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>,
+ *		  2007-2008 Daniel Ribeiro <drwyrm@gmail.com>,
+ *		  2007-2008 Stefan Schmidt <stefan@datenfreihafen.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/pwm_backlight.h>
+
+#include <asm/setup.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/ohci.h>
+#include <asm/arch/i2c.h>
+
+#include <asm/arch/mfp-pxa27x.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "devices.h"
+#include "generic.h"
+
+static struct platform_pwm_backlight_data ezx_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 1023,
+	.dft_brightness	= 1023,
+	.pwm_period_ns	= 78770,
+};
+
+static struct platform_device ezx_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent	= &pxa27x_device_pwm0.dev,
+		.platform_data = &ezx_backlight_data,
+	},
+};
+
+static struct pxafb_mode_info mode_ezx_old = {
+	.pixclock		= 150000,
+	.xres			= 240,
+	.yres			= 320,
+	.bpp			= 16,
+	.hsync_len		= 10,
+	.left_margin		= 20,
+	.right_margin		= 10,
+	.vsync_len		= 2,
+	.upper_margin		= 3,
+	.lower_margin		= 2,
+	.sync			= 0,
+};
+
+static struct pxafb_mach_info ezx_fb_info_1 = {
+	.modes		= &mode_ezx_old,
+	.num_modes	= 1,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP,
+};
+
+static struct pxafb_mode_info mode_72r89803y01 = {
+	.pixclock		= 192308,
+	.xres			= 240,
+	.yres			= 320,
+	.bpp			= 32,
+	.depth			= 18,
+	.hsync_len		= 10,
+	.left_margin		= 20,
+	.right_margin		= 10,
+	.vsync_len		= 2,
+	.upper_margin		= 3,
+	.lower_margin		= 2,
+	.sync			= 0,
+};
+
+static struct pxafb_mach_info ezx_fb_info_2 = {
+	.modes		= &mode_72r89803y01,
+	.num_modes	= 1,
+	.lcd_conn	= LCD_COLOR_TFT_18BPP,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&ezx_backlight_device,
+};
+
+static unsigned long ezx_pin_config[] __initdata = {
+	/* PWM backlight */
+	GPIO16_PWM0_OUT,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* For A780 support (connected with Neptune GSM chip) */
+	GPIO30_USB_P3_2,	/* ICL_TXENB */
+	GPIO31_USB_P3_6,	/* ICL_VPOUT */
+	GPIO90_USB_P3_5,	/* ICL_VPIN */
+	GPIO91_USB_P3_1,	/* ICL_XRXD */
+	GPIO56_USB_P3_4,	/* ICL_VMOUT */
+	GPIO113_USB_P3_3,	/* /ICL_VMIN */
+};
+
+static void __init ezx_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+	pxa_set_i2c_info(NULL);
+	if (machine_is_ezx_a780() || machine_is_ezx_e680())
+		set_pxa_fb_info(&ezx_fb_info_1);
+	else
+		set_pxa_fb_info(&ezx_fb_info_2);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init ezx_fixup(struct machine_desc *desc, struct tag *tags,
+		char **cmdline, struct meminfo *mi)
+{
+	/* We have two ram chips. First one with 32MB at 0xA0000000 and a second
+	 * 16MB one at 0xAC000000
+	 */
+	mi->nr_banks = 2;
+	mi->bank[0].start = 0xa0000000;
+	mi->bank[0].node = 0;
+	mi->bank[0].size = (32*1024*1024);
+	mi->bank[1].start = 0xac000000;
+	mi->bank[1].node = 1;
+	mi->bank[1].size = (16*1024*1024);
+}
+
+#ifdef CONFIG_MACH_EZX_A780
+MACHINE_START(EZX_A780, "Motorola EZX A780")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E680
+MACHINE_START(EZX_E680, "Motorola EZX E680")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_A1200
+MACHINE_START(EZX_A1200, "Motorola EZX A1200")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_A910
+MACHINE_START(EZX_A910, "Motorola EZX A910")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E6
+MACHINE_START(EZX_E6, "Motorola EZX E6")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E2
+MACHINE_START(EZX_E2, "Motorola EZX E2")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif

arch/arm/mach-pxa/littleton.c

@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/smc91x.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -38,6 +39,7 @@
 #include <asm/arch/pxafb.h>
 #include <asm/arch/ssp.h>
 #include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/pxa3xx_nand.h>
 #include <asm/arch/littleton.h>
 
 #include "generic.h"
@@ -101,18 +103,26 @@ static struct resource smc91x_resources[] = {
 	[1] = {
 		.start	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
 		.end	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	}
 };
 
+static struct smc91x_platdata littleton_smc91x_info = {
+	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT |
+		  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &littleton_smc91x_info,
+	},
 };
 
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULES)
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 /* use bit 30, 31 as the indicator of command parameter number */
 #define CMD0(x)		((0x00000000) | ((x) << 9))
 #define CMD1(x, x1)	((0x40000000) | ((x) << 9) | 0x100 | (x1))
@@ -311,9 +321,9 @@ static void littleton_init_lcd(void)
 }
 #else
 static inline void littleton_init_lcd(void) {};
-#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULES */
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int littleton_matrix_key_map[] = {
 	/* KEY(row, col, key_code) */
 	KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
@@ -361,6 +371,57 @@ static void __init littleton_init_keypad(void)
 static inline void littleton_init_keypad(void) {}
 #endif
 
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition littleton_nand_partitions[] = {
+	[0] = {
+		.name        = "Bootloader",
+		.offset      = 0,
+		.size        = 0x060000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[1] = {
+		.name        = "Kernel",
+		.offset      = 0x060000,
+		.size        = 0x200000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[2] = {
+		.name        = "Filesystem",
+		.offset      = 0x0260000,
+		.size        = 0x3000000,     /* 48M - rootfs */
+	},
+	[3] = {
+		.name        = "MassStorage",
+		.offset      = 0x3260000,
+		.size        = 0x3d40000,
+	},
+	[4] = {
+		.name        = "BBT",
+		.offset      = 0x6FA0000,
+		.size        = 0x80000,
+		.mask_flags  = MTD_WRITEABLE,  /* force read-only */
+	},
+	/* NOTE: we reserve some blocks at the end of the NAND flash for
+	 * bad block management, and the max number of relocation blocks
+	 * differs on different platforms. Please take care with it when
+	 * defining the partition table.
+	 */
+};
+
+static struct pxa3xx_nand_platform_data littleton_nand_info = {
+	.enable_arbiter	= 1,
+	.parts		= littleton_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(littleton_nand_partitions),
+};
+
+static void __init littleton_init_nand(void)
+{
+	pxa3xx_set_nand_info(&littleton_nand_info);
+}
+#else
+static inline void littleton_init_nand(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
 static void __init littleton_init(void)
 {
 	/* initialize MFP configurations */
@@ -374,6 +435,7 @@ static void __init littleton_init(void)
 
 	littleton_init_lcd();
 	littleton_init_keypad();
+	littleton_init_nand();
 }
 
 MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")

arch/arm/mach-pxa/lubbock.c

@@ -21,6 +21,7 @@
 #include <linux/interrupt.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/smc91x.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -226,14 +227,6 @@ static struct pxa2xx_spi_master pxa_ssp_master_info = {
 	.num_chipselect	= 0,
 };
 
-static struct platform_device pxa_ssp = {
-	.name		= "pxa2xx-spi",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &pxa_ssp_master_info,
-	},
-};
-
 static int lubbock_ads7846_pendown_state(void)
 {
 	/* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
@@ -292,11 +285,18 @@ static struct resource smc91x_resources[] = {
 	},
 };
 
+static struct smc91x_platdata lubbock_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &lubbock_smc91x_info,
+	},
 };
 
 static struct resource flash_resources[] = {
@@ -367,7 +367,6 @@ static struct platform_device *devices[] __initdata = {
 	&smc91x_device,
 	&lubbock_flash_device[0],
 	&lubbock_flash_device[1],
-	&pxa_ssp,
 };
 
 static struct pxafb_mode_info sharp_lm8v31_mode = {
@@ -471,6 +470,7 @@ static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
 	} else if (mode & IR_FIRMODE) {
 		LUB_MISC_WR |= 1 << 4;
 	}
+	pxa2xx_transceiver_mode(dev, mode);
 	local_irq_restore(flags);
 }
 
@@ -501,6 +501,7 @@ static void __init lubbock_init(void)
 	lubbock_flash_data[flashboot].name = "boot-rom";
 	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
 
+	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
 	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 }
 

arch/arm/mach-pxa/magician.c

@@ -17,17 +17,15 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/mfd/htc-egpio.h>
 #include <linux/mfd/htc-pasic3.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
 #include <linux/mtd/physmap.h>
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 
-#include <asm/gpio.h>
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -44,7 +42,7 @@
 #include "devices.h"
 #include "generic.h"
 
-static unsigned long magician_pin_config[] = {
+static unsigned long magician_pin_config[] __initdata = {
 
 	/* SDRAM and Static Memory I/O Signals */
 	GPIO20_nSDCS_2,
@@ -134,6 +132,7 @@ static unsigned long magician_pin_config[] = {
 static void magician_irda_transceiver_mode(struct device *dev, int mode)
 {
 	gpio_set_value(GPIO83_MAGICIAN_nIR_EN, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
 }
 
 static struct pxaficp_platform_data magician_ficp_info = {
@@ -399,6 +398,7 @@ static struct platform_pwm_backlight_data backlight_data = {
 
 static struct platform_device backlight = {
 	.name = "pwm-backlight",
+	.id   = -1,
 	.dev  = {
 		.parent        = &pxa27x_device_pwm0.dev,
 		.platform_data = &backlight_data,
@@ -511,6 +511,37 @@ static struct platform_device pasic3 = {
  * External power
  */
 
+static int power_supply_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
+	if (ret)
+		goto err_cs_ac;
+	ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_USB, "CABLE_STATE_USB");
+	if (ret)
+		goto err_cs_usb;
+	ret = gpio_request(EGPIO_MAGICIAN_CHARGE_EN, "CHARGE_EN");
+	if (ret)
+		goto err_chg_en;
+	ret = gpio_request(GPIO30_MAGICIAN_nCHARGE_EN, "nCHARGE_EN");
+	if (!ret)
+		ret = gpio_direction_output(GPIO30_MAGICIAN_nCHARGE_EN, 0);
+	if (ret)
+		goto err_nchg_en;
+
+	return 0;
+
+err_nchg_en:
+	gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
+err_chg_en:
+	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
+err_cs_usb:
+	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+err_cs_ac:
+	return ret;
+}
+
 static int magician_is_ac_online(void)
 {
 	return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
@@ -527,14 +558,24 @@ static void magician_set_charge(int flags)
 	gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags);
 }
 
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(GPIO30_MAGICIAN_nCHARGE_EN);
+	gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
+	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
+	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+}
+
 static char *magician_supplicants[] = {
 	"ds2760-battery.0", "backup-battery"
 };
 
 static struct pda_power_pdata power_supply_info = {
+	.init            = power_supply_init,
 	.is_ac_online    = magician_is_ac_online,
 	.is_usb_online   = magician_is_usb_online,
 	.set_charge      = magician_set_charge,
+	.exit            = power_supply_exit,
 	.supplied_to     = magician_supplicants,
 	.num_supplicants = ARRAY_SIZE(magician_supplicants),
 };

arch/arm/mach-pxa/mainstone.c

@@ -26,6 +26,7 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -110,9 +111,9 @@ static unsigned long mainstone_pin_config[] = {
 	GPIO45_AC97_SYSCLK,
 
 	/* Keypad */
-	GPIO93_KP_DKIN_0	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO94_KP_DKIN_1	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO95_KP_DKIN_2	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO93_KP_DKIN_0,
+	GPIO94_KP_DKIN_1,
+	GPIO95_KP_DKIN_2,
 	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
 	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
 	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
@@ -240,11 +241,19 @@ static struct resource smc91x_resources[] = {
 	}
 };
 
+static struct smc91x_platdata mainstone_smc91x_info = {
+	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+		  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &mainstone_smc91x_info,
+	},
 };
 
 static int mst_audio_startup(struct snd_pcm_substream *substream, void *priv)
@@ -455,6 +464,7 @@ static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
 	} else if (mode & IR_FIRMODE) {
 		MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
 	}
+	pxa2xx_transceiver_mode(dev, mode);
 	if (mode & IR_OFF) {
 		MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
 	} else {
@@ -513,7 +523,7 @@ static struct pxaohci_platform_data mainstone_ohci_platform_data = {
 	.init		= mainstone_ohci_init,
 };
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int mainstone_matrix_keys[] = {
 	KEY(0, 0, KEY_A), KEY(1, 0, KEY_B), KEY(2, 0, KEY_C),
 	KEY(3, 0, KEY_D), KEY(4, 0, KEY_E), KEY(5, 0, KEY_F),

arch/arm/mach-pxa/mfp-pxa2xx.c

@@ -39,6 +39,28 @@ struct gpio_desc {
 
 static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1];
 
+static int __mfp_config_lpm(unsigned gpio, unsigned long lpm)
+{
+	unsigned mask = GPIO_bit(gpio);
+
+	/* low power state */
+	switch (lpm) {
+	case MFP_LPM_DRIVE_HIGH:
+		PGSR(gpio) |= mask;
+		break;
+	case MFP_LPM_DRIVE_LOW:
+		PGSR(gpio) &= ~mask;
+		break;
+	case MFP_LPM_INPUT:
+		break;
+	default:
+		pr_warning("%s: invalid low power state for GPIO%d\n",
+				__func__, gpio);
+		return -EINVAL;
+	}
+	return 0;
+}
+
 static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 {
 	unsigned long gafr, mask = GPIO_bit(gpio);
@@ -57,21 +79,8 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 	else
 		GPDR(gpio) &= ~mask;
 
-	/* low power state */
-	switch (c & MFP_LPM_STATE_MASK) {
-	case MFP_LPM_DRIVE_HIGH:
-		PGSR(gpio) |= mask;
-		break;
-	case MFP_LPM_DRIVE_LOW:
-		PGSR(gpio) &= ~mask;
-		break;
-	case MFP_LPM_INPUT:
-		break;
-	default:
-		pr_warning("%s: invalid low power state for GPIO%d\n",
-				__func__, gpio);
+	if (__mfp_config_lpm(gpio, c & MFP_LPM_STATE_MASK))
 		return -EINVAL;
-	}
 
 	/* give early warning if MFP_LPM_CAN_WAKEUP is set on the
 	 * configurations of those pins not able to wakeup
@@ -91,6 +100,18 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 	return 0;
 }
 
+static inline int __mfp_validate(int mfp)
+{
+	int gpio = mfp_to_gpio(mfp);
+
+	if ((mfp > MFP_PIN_GPIO127) || !gpio_desc[gpio].valid) {
+		pr_warning("%s: GPIO%d is invalid pin\n", __func__, gpio);
+		return -1;
+	}
+
+	return gpio;
+}
+
 void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
 {
 	unsigned long flags;
@@ -99,13 +120,9 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
 
 	for (i = 0, c = mfp_cfgs; i < num; i++, c++) {
 
-		gpio = mfp_to_gpio(MFP_PIN(*c));
-
-		if (!gpio_desc[gpio].valid) {
-			pr_warning("%s: GPIO%d is invalid pin\n",
-				__func__, gpio);
+		gpio = __mfp_validate(MFP_PIN(*c));
+		if (gpio < 0)
 			continue;
-		}
 
 		local_irq_save(flags);
 
@@ -116,6 +133,20 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
 	}
 }
 
+void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm)
+{
+	unsigned long flags;
+	int gpio;
+
+	gpio = __mfp_validate(mfp);
+	if (gpio < 0)
+		return;
+
+	local_irq_save(flags);
+	__mfp_config_lpm(gpio, lpm);
+	local_irq_restore(flags);
+}
+
 int gpio_set_wake(unsigned int gpio, unsigned int on)
 {
 	struct gpio_desc *d;

arch/arm/mach-pxa/palmtx.c

+/*
+ * Hardware definitions for PalmTX
+ *
+ * Author:     Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ *		Alex Osborne <ato@meshy.org>
+ *		Cristiano P. <cristianop@users.sourceforge.net>
+ *		Jan Herman <2hp@seznam.cz>
+ *		Michal Hrusecky
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/audio.h>
+#include <asm/arch/palmtx.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/mfp-pxa27x.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/udc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmtx_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* IrDA */
+	GPIO46_FICP_RXD,
+	GPIO47_FICP_TXD,
+
+	/* PWM */
+	GPIO16_PWM0_OUT,
+
+	/* USB */
+	GPIO13_GPIO,
+
+	/* PCMCIA */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO79_PSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int,
+				void *data)
+{
+	int err = 0;
+
+	/* Setup an interrupt for detecting card insert/remove events */
+	err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int,
+			IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			"SD/MMC card detect", data);
+	if (err) {
+		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+				__func__);
+		return err;
+	}
+
+	err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
+	if (err)
+		goto pwr_err;
+
+	err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
+	if (err)
+		goto ro_err;
+
+	printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+	return 0;
+
+ro_err:
+	gpio_free(GPIO_NR_PALMTX_SD_POWER);
+pwr_err:
+	free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+	return err;
+}
+
+static void palmtx_mci_exit(struct device *dev, void *data)
+{
+	gpio_free(GPIO_NR_PALMTX_SD_READONLY);
+	gpio_free(GPIO_NR_PALMTX_SD_POWER);
+	free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+}
+
+static void palmtx_mci_power(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data *p_d = dev->platform_data;
+	gpio_set_value(GPIO_NR_PALMTX_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int palmtx_mci_get_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO_NR_PALMTX_SD_READONLY);
+}
+
+static struct pxamci_platform_data palmtx_mci_platform_data = {
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.setpower	= palmtx_mci_power,
+	.get_ro		= palmtx_mci_get_ro,
+	.init 		= palmtx_mci_init,
+	.exit		= palmtx_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmtx_matrix_keys[] = {
+	KEY(0, 0, KEY_POWER),
+	KEY(0, 1, KEY_F1),
+	KEY(0, 2, KEY_ENTER),
+
+	KEY(1, 0, KEY_F2),
+	KEY(1, 1, KEY_F3),
+	KEY(1, 2, KEY_F4),
+
+	KEY(2, 0, KEY_UP),
+	KEY(2, 2, KEY_DOWN),
+
+	KEY(3, 0, KEY_RIGHT),
+	KEY(3, 2, KEY_LEFT),
+
+};
+
+static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
+	.matrix_key_rows	= 4,
+	.matrix_key_cols	= 3,
+	.matrix_key_map		= palmtx_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(palmtx_matrix_keys),
+
+	.debounce_interval	= 30,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmtx_pxa_buttons[] = {
+	{KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
+};
+
+static struct gpio_keys_platform_data palmtx_pxa_keys_data = {
+	.buttons	= palmtx_pxa_buttons,
+	.nbuttons	= ARRAY_SIZE(palmtx_pxa_buttons),
+};
+
+static struct platform_device palmtx_pxa_keys = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &palmtx_pxa_keys_data,
+	},
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmtx_backlight_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
+	if (ret)
+		goto err;
+	ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
+	if (ret)
+		goto err2;
+
+	return 0;
+err2:
+	gpio_free(GPIO_NR_PALMTX_BL_POWER);
+err:
+	return ret;
+}
+
+static int palmtx_backlight_notify(int brightness)
+{
+	gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness);
+	gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness);
+	return brightness;
+}
+
+static void palmtx_backlight_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMTX_BL_POWER);
+	gpio_free(GPIO_NR_PALMTX_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmtx_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= PALMTX_MAX_INTENSITY,
+	.dft_brightness	= PALMTX_MAX_INTENSITY,
+	.pwm_period_ns	= PALMTX_PERIOD_NS,
+	.init		= palmtx_backlight_init,
+	.notify		= palmtx_backlight_notify,
+	.exit		= palmtx_backlight_exit,
+};
+
+static struct platform_device palmtx_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &palmtx_backlight_data,
+	},
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
+{
+	gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmtx_ficp_platform_data = {
+	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
+	.transceiver_mode	= palmtx_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static void palmtx_udc_command(int cmd)
+{
+	gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd);
+	udelay(50);
+	gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd);
+}
+
+static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
+	.gpio_vbus		= GPIO_NR_PALMTX_USB_DETECT_N,
+	.gpio_vbus_inverted	= 1,
+	.udc_command		= palmtx_udc_command,
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
+	if (ret)
+		goto err_cs_ac;
+
+	ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB");
+	if (ret)
+		goto err_cs_usb;
+
+	return 0;
+
+err_cs_usb:
+	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+err_cs_ac:
+	return ret;
+}
+
+static int palmtx_is_ac_online(void)
+{
+	return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
+}
+
+static int palmtx_is_usb_online(void)
+{
+	return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMTX_USB_DETECT_N);
+	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+}
+
+static char *palmtx_supplicants[] = {
+	"main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+	.init            = power_supply_init,
+	.is_ac_online    = palmtx_is_ac_online,
+	.is_usb_online   = palmtx_is_usb_online,
+	.exit            = power_supply_exit,
+	.supplied_to     = palmtx_supplicants,
+	.num_supplicants = ARRAY_SIZE(palmtx_supplicants),
+};
+
+static struct platform_device power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &power_supply_info,
+	},
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmtx_lcd_modes[] = {
+{
+	.pixclock	= 57692,
+	.xres		= 320,
+	.yres		= 480,
+	.bpp		= 16,
+
+	.left_margin	= 32,
+	.right_margin	= 1,
+	.upper_margin	= 7,
+	.lower_margin	= 1,
+
+	.hsync_len	= 4,
+	.vsync_len	= 1,
+},
+};
+
+static struct pxafb_mach_info palmtx_lcd_screen = {
+	.modes		= palmtx_lcd_modes,
+	.num_modes	= ARRAY_SIZE(palmtx_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+	&palmtx_pxa_keys,
+#endif
+	&palmtx_backlight,
+	&power_supply,
+};
+
+static struct map_desc palmtx_io_desc[] __initdata = {
+{
+	.virtual	= PALMTX_PCMCIA_VIRT,
+	.pfn		= __phys_to_pfn(PALMTX_PCMCIA_PHYS),
+	.length		= PALMTX_PCMCIA_SIZE,
+	.type		= MT_DEVICE
+},
+};
+
+static void __init palmtx_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
+}
+
+static void __init palmtx_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
+
+	set_pxa_fb_info(&palmtx_lcd_screen);
+	pxa_set_mci_info(&palmtx_mci_platform_data);
+	pxa_set_udc_info(&palmtx_udc_info);
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&palmtx_ficp_platform_data);
+	pxa_set_keypad_info(&palmtx_keypad_platform_data);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMTX, "Palm T|X")
+	.phys_io	= PALMTX_PHYS_IO_START,
+	.io_pg_offst	= io_p2v(0x40000000),
+	.boot_params	= 0xa0000100,
+	.map_io		= palmtx_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= palmtx_init
+MACHINE_END

arch/arm/mach-pxa/pcm027.c

@@ -24,7 +24,9 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/max7301.h>
 #include <linux/leds.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/arch/hardware.h>
@@ -108,6 +110,32 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
+/*
+ * SPI host and devices
+ */
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+	.num_chipselect	= 1,
+};
+
+static struct max7301_platform_data max7301_info = {
+	.base = -1,
+};
+
+/* bus_num must match id in pxa2xx_set_spi_info() call */
+static struct spi_board_info spi_board_info[] __initdata = {
+	{
+		.modalias	= "max7301",
+		.platform_data	= &max7301_info,
+		.max_speed_hz	= 13000000,
+		.bus_num	= 1,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_0,
+	},
+};
+
+/*
+ * NOR flash
+ */
 static struct physmap_flash_data pcm027_flash_data = {
 	.width  = 4,
 };
@@ -190,6 +218,9 @@ static void __init pcm027_init(void)
 #ifdef CONFIG_MACH_PCM990_BASEBOARD
 	pcm990_baseboard_init();
 #endif
+
+	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 }
 
 static void __init pcm027_map_io(void)

arch/arm/mach-pxa/poodle.c

@@ -267,6 +267,7 @@ static void poodle_irda_transceiver_mode(struct device *dev, int mode)
 	} else {
 		GPCR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
 	}
+	pxa2xx_transceiver_mode(dev, mode);
 }
 
 static struct pxaficp_platform_data poodle_ficp_platform_data = {

arch/arm/mm/Makefile

@@ -76,3 +76,5 @@ obj-$(CONFIG_CPU_V7)		+= proc-v7.o
 
 obj-$(CONFIG_CACHE_FEROCEON_L2)	+= cache-feroceon-l2.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
+obj-$(CONFIG_CACHE_XSC3L2)	+= cache-xsc3l2.o
+