提交 304664ea 编写于 作者: T Thierry Reding

ARM: tegra: Use a function to get the chip ID

Instead of using a simple variable access to get at the Tegra chip ID,
use a function so that we can run additional code. This can be used to
determine where the chip ID is being accessed without being available.
That in turn will be handy for resolving boot sequence dependencies in
order to convert more code to regular initcalls rather than a sequence
fixed by Tegra SoC setup code.
Signed-off-by: NThierry Reding <treding@nvidia.com>
上级 a0524acc
......@@ -24,12 +24,13 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include "fuse.h"
#include <soc/tegra/fuse.h>
#include "cpuidle.h"
void __init tegra_cpuidle_init(void)
{
switch (tegra_chip_id) {
switch (tegra_get_chip_id()) {
case TEGRA20:
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
tegra20_cpuidle_init();
......@@ -49,7 +50,7 @@ void __init tegra_cpuidle_init(void)
void tegra_cpuidle_pcie_irqs_in_use(void)
{
switch (tegra_chip_id) {
switch (tegra_get_chip_id()) {
case TEGRA20:
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
tegra20_cpuidle_pcie_irqs_in_use();
......
......@@ -23,9 +23,10 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <soc/tegra/fuse.h>
#include "flowctrl.h"
#include "iomap.h"
#include "fuse.h"
static u8 flowctrl_offset_halt_cpu[] = {
FLOW_CTRL_HALT_CPU0_EVENTS,
......@@ -76,7 +77,7 @@ void flowctrl_cpu_suspend_enter(unsigned int cpuid)
int i;
reg = flowctrl_read_cpu_csr(cpuid);
switch (tegra_chip_id) {
switch (tegra_get_chip_id()) {
case TEGRA20:
/* clear wfe bitmap */
reg &= ~TEGRA20_FLOW_CTRL_CSR_WFE_BITMAP;
......@@ -117,7 +118,7 @@ void flowctrl_cpu_suspend_exit(unsigned int cpuid)
/* Disable powergating via flow controller for CPU0 */
reg = flowctrl_read_cpu_csr(cpuid);
switch (tegra_chip_id) {
switch (tegra_get_chip_id()) {
case TEGRA20:
/* clear wfe bitmap */
reg &= ~TEGRA20_FLOW_CTRL_CSR_WFE_BITMAP;
......
......@@ -51,7 +51,6 @@
int tegra_sku_id;
int tegra_cpu_process_id;
int tegra_core_process_id;
int tegra_chip_id;
int tegra_cpu_speedo_id; /* only exist in Tegra30 and later */
int tegra_soc_speedo_id;
enum tegra_revision tegra_revision;
......@@ -124,7 +123,7 @@ static enum tegra_revision tegra_get_revision(u32 id)
case 2:
return TEGRA_REVISION_A02;
case 3:
if (tegra_chip_id == TEGRA20 &&
if (tegra_get_chip_id() == TEGRA20 &&
(tegra_spare_fuse(18) || tegra_spare_fuse(19)))
return TEGRA_REVISION_A03p;
else
......@@ -155,6 +154,13 @@ u32 tegra_read_chipid(void)
return readl_relaxed(IO_ADDRESS(TEGRA_APB_MISC_BASE) + 0x804);
}
u8 tegra_get_chip_id(void)
{
u32 id = tegra_read_chipid();
return (id >> 8) & 0xff;
}
static void __init tegra20_fuse_init_randomness(void)
{
u32 randomness[2];
......@@ -185,6 +191,7 @@ void __init tegra_init_fuse(void)
{
u32 id;
u32 randomness[5];
u8 chip_id;
u32 reg = readl(IO_ADDRESS(TEGRA_CLK_RESET_BASE + 0x48));
reg |= 1 << 28;
......@@ -209,9 +216,9 @@ void __init tegra_init_fuse(void)
id = tegra_read_chipid();
randomness[2] = id;
tegra_chip_id = (id >> 8) & 0xff;
chip_id = (id >> 8) & 0xff;
switch (tegra_chip_id) {
switch (chip_id) {
case TEGRA20:
tegra_fuse_spare_bit = TEGRA20_FUSE_SPARE_BIT;
tegra_init_speedo_data = &tegra20_init_speedo_data;
......@@ -224,7 +231,7 @@ void __init tegra_init_fuse(void)
tegra_init_speedo_data = &tegra114_init_speedo_data;
break;
default:
pr_warn("Tegra: unknown chip id %d\n", tegra_chip_id);
pr_warn("Tegra: unknown chip id %d\n", chip_id);
tegra_fuse_spare_bit = TEGRA20_FUSE_SPARE_BIT;
tegra_init_speedo_data = &tegra_get_process_id;
}
......@@ -235,7 +242,7 @@ void __init tegra_init_fuse(void)
randomness[4] = (tegra_cpu_speedo_id << 16) | tegra_soc_speedo_id;
add_device_randomness(randomness, sizeof(randomness));
switch (tegra_chip_id) {
switch (chip_id) {
case TEGRA20:
tegra20_fuse_init_randomness();
break;
......
......@@ -26,11 +26,6 @@
#define SKU_ID_AP25E 27
#define SKU_ID_T25E 28
#define TEGRA20 0x20
#define TEGRA30 0x30
#define TEGRA114 0x35
#define TEGRA124 0x40
#ifndef __ASSEMBLY__
enum tegra_revision {
TEGRA_REVISION_UNKNOWN = 0,
......@@ -45,7 +40,6 @@ enum tegra_revision {
extern int tegra_sku_id;
extern int tegra_cpu_process_id;
extern int tegra_core_process_id;
extern int tegra_chip_id;
extern int tegra_cpu_speedo_id; /* only exist in Tegra30 and later */
extern int tegra_soc_speedo_id;
extern enum tegra_revision tegra_revision;
......
......@@ -12,9 +12,10 @@
#include <linux/kernel.h>
#include <linux/smp.h>
#include <soc/tegra/fuse.h>
#include <asm/smp_plat.h>
#include "fuse.h"
#include "sleep.h"
static void (*tegra_hotplug_shutdown)(void);
......@@ -52,12 +53,12 @@ void __init tegra_hotplug_init(void)
if (!IS_ENABLED(CONFIG_HOTPLUG_CPU))
return;
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_chip_id == TEGRA20)
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_get_chip_id() == TEGRA20)
tegra_hotplug_shutdown = tegra20_hotplug_shutdown;
if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_chip_id == TEGRA30)
if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_get_chip_id() == TEGRA30)
tegra_hotplug_shutdown = tegra30_hotplug_shutdown;
if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) && tegra_chip_id == TEGRA114)
if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) && tegra_get_chip_id() == TEGRA114)
tegra_hotplug_shutdown = tegra30_hotplug_shutdown;
if (IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC) && tegra_chip_id == TEGRA124)
if (IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC) && tegra_get_chip_id() == TEGRA124)
tegra_hotplug_shutdown = tegra30_hotplug_shutdown;
}
......@@ -21,6 +21,8 @@
#include <linux/jiffies.h>
#include <linux/smp.h>
#include <soc/tegra/fuse.h>
#include <asm/cacheflush.h>
#include <asm/mach-types.h>
#include <asm/smp_plat.h>
......@@ -28,7 +30,6 @@
#include "common.h"
#include "flowctrl.h"
#include "fuse.h"
#include "iomap.h"
#include "pmc.h"
#include "reset.h"
......@@ -170,13 +171,13 @@ static int tegra114_boot_secondary(unsigned int cpu, struct task_struct *idle)
static int tegra_boot_secondary(unsigned int cpu,
struct task_struct *idle)
{
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_chip_id == TEGRA20)
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && tegra_get_chip_id() == TEGRA20)
return tegra20_boot_secondary(cpu, idle);
if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_chip_id == TEGRA30)
if (IS_ENABLED(CONFIG_ARCH_TEGRA_3x_SOC) && tegra_get_chip_id() == TEGRA30)
return tegra30_boot_secondary(cpu, idle);
if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) && tegra_chip_id == TEGRA114)
if (IS_ENABLED(CONFIG_ARCH_TEGRA_114_SOC) && tegra_get_chip_id() == TEGRA114)
return tegra114_boot_secondary(cpu, idle);
if (IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC) && tegra_chip_id == TEGRA124)
if (IS_ENABLED(CONFIG_ARCH_TEGRA_124_SOC) && tegra_get_chip_id() == TEGRA124)
return tegra114_boot_secondary(cpu, idle);
return -EINVAL;
......
......@@ -27,6 +27,8 @@
#include <linux/spinlock.h>
#include <linux/suspend.h>
#include <soc/tegra/fuse.h>
#include <asm/cacheflush.h>
#include <asm/idmap.h>
#include <asm/proc-fns.h>
......@@ -35,7 +37,6 @@
#include <asm/tlbflush.h>
#include "flowctrl.h"
#include "fuse.h"
#include "iomap.h"
#include "pmc.h"
#include "pm.h"
......@@ -53,7 +54,7 @@ static int (*tegra_sleep_func)(unsigned long v2p);
static void tegra_tear_down_cpu_init(void)
{
switch (tegra_chip_id) {
switch (tegra_get_chip_id()) {
case TEGRA20:
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
tegra_tear_down_cpu = tegra20_tear_down_cpu;
......@@ -143,7 +144,7 @@ bool tegra_set_cpu_in_lp2(void)
if ((phy_cpu_id == 0) && cpumask_equal(cpu_lp2_mask, cpu_online_mask))
last_cpu = true;
else if (tegra_chip_id == TEGRA20 && phy_cpu_id == 1)
else if (tegra_get_chip_id() == TEGRA20 && phy_cpu_id == 1)
tegra20_cpu_set_resettable_soon();
spin_unlock(&tegra_lp2_lock);
......@@ -212,7 +213,7 @@ static int tegra_sleep_core(unsigned long v2p)
*/
static bool tegra_lp1_iram_hook(void)
{
switch (tegra_chip_id) {
switch (tegra_get_chip_id()) {
case TEGRA20:
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
tegra20_lp1_iram_hook();
......@@ -242,7 +243,7 @@ static bool tegra_lp1_iram_hook(void)
static bool tegra_sleep_core_init(void)
{
switch (tegra_chip_id) {
switch (tegra_get_chip_id()) {
case TEGRA20:
if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC))
tegra20_sleep_core_init();
......
......@@ -21,10 +21,10 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <soc/tegra/fuse.h>
#include <soc/tegra/powergate.h>
#include "flowctrl.h"
#include "fuse.h"
#include "pm.h"
#include "pmc.h"
#include "sleep.h"
......@@ -252,7 +252,7 @@ void tegra_pmc_pm_set(enum tegra_suspend_mode mode)
reg |= TEGRA_POWER_CPU_PWRREQ_OE;
reg &= ~TEGRA_POWER_EFFECT_LP0;
switch (tegra_chip_id) {
switch (tegra_get_chip_id()) {
case TEGRA20:
case TEGRA30:
break;
......
......@@ -30,9 +30,9 @@
#include <linux/seq_file.h>
#include <linux/spinlock.h>
#include <soc/tegra/fuse.h>
#include <soc/tegra/powergate.h>
#include "fuse.h"
#include "iomap.h"
#define DPD_SAMPLE 0x020
......@@ -158,7 +158,7 @@ int tegra_powergate_remove_clamping(int id)
* The Tegra124 GPU has a separate register (with different semantics)
* to remove clamps.
*/
if (tegra_chip_id == TEGRA124) {
if (tegra_get_chip_id() == TEGRA124) {
if (id == TEGRA_POWERGATE_3D) {
pmc_write(0, GPU_RG_CNTRL);
return 0;
......@@ -228,7 +228,7 @@ int tegra_cpu_powergate_id(int cpuid)
int __init tegra_powergate_init(void)
{
switch (tegra_chip_id) {
switch (tegra_get_chip_id()) {
case TEGRA20:
tegra_num_powerdomains = 7;
break;
......@@ -369,7 +369,7 @@ int __init tegra_powergate_debugfs_init(void)
{
struct dentry *d;
switch (tegra_chip_id) {
switch (tegra_get_chip_id()) {
case TEGRA20:
powergate_name = powergate_name_t20;
break;
......
......@@ -17,11 +17,12 @@
#include <linux/init.h>
#include <linux/linkage.h>
#include <soc/tegra/fuse.h>
#include <asm/asm-offsets.h>
#include <asm/cache.h>
#include "flowctrl.h"
#include "fuse.h"
#include "iomap.h"
#include "reset.h"
#include "sleep.h"
......
......@@ -19,6 +19,8 @@
#include <linux/init.h>
#include <linux/io.h>
#include <soc/tegra/fuse.h>
#include <asm/cacheflush.h>
#include <asm/firmware.h>
#include <asm/hardware/cache-l2x0.h>
......@@ -53,7 +55,7 @@ static void __init tegra_cpu_reset_handler_set(const u32 reset_address)
* Prevent further modifications to the physical reset vector.
* NOTE: Has no effect on chips prior to Tegra30.
*/
if (tegra_chip_id != TEGRA20) {
if (tegra_get_chip_id() != TEGRA20) {
reg = readl(sb_ctrl);
reg |= 2;
writel(reg, sb_ctrl);
......
......@@ -16,12 +16,13 @@
#include <linux/linkage.h>
#include <soc/tegra/fuse.h>
#include <asm/asm-offsets.h>
#include <asm/assembler.h>
#include <asm/cache.h>
#include "flowctrl.h"
#include "fuse.h"
#include "irammap.h"
#include "sleep.h"
......
......@@ -35,6 +35,8 @@
#include <linux/sys_soc.h>
#include <linux/usb/tegra_usb_phy.h>
#include <soc/tegra/fuse.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
......@@ -104,7 +106,7 @@ static void __init tegra_dt_init(void)
soc_dev_attr->family = kasprintf(GFP_KERNEL, "Tegra");
soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d", tegra_revision);
soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%d", tegra_chip_id);
soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%u", tegra_get_chip_id());
soc_dev = soc_device_register(soc_dev_attr);
if (IS_ERR(soc_dev)) {
......
......@@ -17,6 +17,16 @@
#ifndef __SOC_TEGRA_FUSE_H__
#define __SOC_TEGRA_FUSE_H__
#define TEGRA20 0x20
#define TEGRA30 0x30
#define TEGRA114 0x35
#define TEGRA124 0x40
#ifndef __ASSEMBLY__
u32 tegra_read_chipid(void);
u8 tegra_get_chip_id(void);
#endif /* __ASSEMBLY__ */
#endif /* __SOC_TEGRA_FUSE_H__ */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册