提交 2f7fe870 编写于 作者: F Felix Fietkau 提交者: John W. Linville

ath5k: implement multi-rate retry support, fix tx status reporting

Clean up the tx status reporting, fix retry counters (short retries are
virtual collisions, not actual retries). Implement multi-rate retry
support.
This also fixes strong throughput fluctuations with rc80211_pid
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 870abdf6
......@@ -431,7 +431,9 @@ struct ath5k_tx_status {
u16 ts_seqnum;
u16 ts_tstamp;
u8 ts_status;
u8 ts_rate;
u8 ts_rate[4];
u8 ts_retry[4];
u8 ts_final_idx;
s8 ts_rssi;
u8 ts_shortretry;
u8 ts_longretry;
......
......@@ -541,6 +541,12 @@ ath5k_pci_probe(struct pci_dev *pdev,
goto err_irq;
}
/* set up multi-rate retry capabilities */
if (sc->ah->ah_version == AR5K_AR5212) {
hw->max_altrates = 3;
hw->max_altrate_tries = 11;
}
/* Finish private driver data initialization */
ret = ath5k_attach(pdev, hw);
if (ret)
......@@ -1173,7 +1179,9 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
struct sk_buff *skb = bf->skb;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
unsigned int pktlen, flags, keyidx = AR5K_TXKEYIX_INVALID;
int ret;
struct ieee80211_rate *rate;
unsigned int mrr_rate[3], mrr_tries[3];
int i, ret;
flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK;
......@@ -1198,6 +1206,22 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
if (ret)
goto err_unmap;
memset(mrr_rate, 0, sizeof(mrr_rate));
memset(mrr_tries, 0, sizeof(mrr_tries));
for (i = 0; i < 3; i++) {
rate = ieee80211_get_alt_retry_rate(sc->hw, info, i);
if (!rate)
break;
mrr_rate[i] = rate->hw_value;
mrr_tries[i] = info->control.retries[i].limit;
}
ah->ah_setup_mrr_tx_desc(ah, ds,
mrr_rate[0], mrr_tries[0],
mrr_rate[1], mrr_tries[1],
mrr_rate[2], mrr_tries[2]);
ds->ds_link = 0;
ds->ds_data = bf->skbaddr;
......@@ -1814,7 +1838,7 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
struct ath5k_desc *ds;
struct sk_buff *skb;
struct ieee80211_tx_info *info;
int ret;
int i, ret;
spin_lock(&txq->lock);
list_for_each_entry_safe(bf, bf0, &txq->q, list) {
......@@ -1836,7 +1860,25 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
pci_unmap_single(sc->pdev, bf->skbaddr, skb->len,
PCI_DMA_TODEVICE);
info->status.retry_count = ts.ts_shortretry + ts.ts_longretry / 6;
memset(&info->status, 0, sizeof(info->status));
info->tx_rate_idx = ath5k_hw_to_driver_rix(sc,
ts.ts_rate[ts.ts_final_idx]);
info->status.retry_count = ts.ts_longretry;
for (i = 0; i < 4; i++) {
struct ieee80211_tx_altrate *r =
&info->status.retries[i];
if (ts.ts_rate[i]) {
r->rate_idx = ath5k_hw_to_driver_rix(sc, ts.ts_rate[i]);
r->limit = ts.ts_retry[i];
} else {
r->rate_idx = -1;
r->limit = 0;
}
}
info->status.excessive_retries = 0;
if (unlikely(ts.ts_status)) {
sc->ll_stats.dot11ACKFailureCount++;
if (ts.ts_status & AR5K_TXERR_XRETRY)
......
......@@ -318,6 +318,15 @@ ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
return 0;
}
/* no mrr support for cards older than 5212 */
static int
ath5k_hw_setup_no_mrr(struct ath5k_hw *ah, struct ath5k_desc *desc,
unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2,
u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3)
{
return 0;
}
/*
* Proccess the tx status descriptor on 5210/5211
*/
......@@ -352,8 +361,10 @@ static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah,
AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH);
ts->ts_antenna = 1;
ts->ts_status = 0;
ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_0,
ts->ts_rate[0] = AR5K_REG_MS(tx_ctl->tx_control_0,
AR5K_2W_TX_DESC_CTL0_XMIT_RATE);
ts->ts_retry[0] = ts->ts_longretry;
ts->ts_final_idx = 0;
if (!(tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) {
if (tx_status->tx_status_0 &
......@@ -405,29 +416,43 @@ static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah,
AR5K_DESC_TX_STATUS1_XMIT_ANTENNA) ? 2 : 1;
ts->ts_status = 0;
switch (AR5K_REG_MS(tx_status->tx_status_1,
AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX)) {
case 0:
ts->ts_rate = tx_ctl->tx_control_3 &
AR5K_4W_TX_DESC_CTL3_XMIT_RATE0;
break;
ts->ts_final_idx = AR5K_REG_MS(tx_status->tx_status_1,
AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX);
/* The longretry counter has the number of un-acked retries
* for the final rate. To get the total number of retries
* we have to add the retry counters for the other rates
* as well
*/
ts->ts_retry[ts->ts_final_idx] = ts->ts_longretry;
switch (ts->ts_final_idx) {
case 3:
ts->ts_rate[3] = AR5K_REG_MS(tx_ctl->tx_control_3,
AR5K_4W_TX_DESC_CTL3_XMIT_RATE3);
ts->ts_retry[2] = AR5K_REG_MS(tx_ctl->tx_control_2,
AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2);
ts->ts_longretry += ts->ts_retry[2];
/* fall through */
case 2:
ts->ts_rate[2] = AR5K_REG_MS(tx_ctl->tx_control_3,
AR5K_4W_TX_DESC_CTL3_XMIT_RATE2);
ts->ts_retry[1] = AR5K_REG_MS(tx_ctl->tx_control_2,
AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1);
ts->ts_longretry += ts->ts_retry[1];
/* fall through */
case 1:
ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3,
ts->ts_rate[1] = AR5K_REG_MS(tx_ctl->tx_control_3,
AR5K_4W_TX_DESC_CTL3_XMIT_RATE1);
ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2,
ts->ts_retry[0] = AR5K_REG_MS(tx_ctl->tx_control_2,
AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1);
break;
case 2:
ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3,
AR5K_4W_TX_DESC_CTL3_XMIT_RATE2);
ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2,
AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2);
break;
case 3:
ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3,
AR5K_4W_TX_DESC_CTL3_XMIT_RATE3);
ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2,
AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3);
ts->ts_longretry += ts->ts_retry[0];
/* fall through */
case 0:
ts->ts_rate[0] = tx_ctl->tx_control_3 &
AR5K_4W_TX_DESC_CTL3_XMIT_RATE0;
break;
}
......@@ -653,7 +678,7 @@ int ath5k_hw_init_desc_functions(struct ath5k_hw *ah)
} else {
ah->ah_setup_rx_desc = ath5k_hw_setup_rx_desc;
ah->ah_setup_tx_desc = ath5k_hw_setup_2word_tx_desc;
ah->ah_setup_mrr_tx_desc = ath5k_hw_setup_mrr_tx_desc;
ah->ah_setup_mrr_tx_desc = ath5k_hw_setup_no_mrr;
ah->ah_proc_tx_desc = ath5k_hw_proc_2word_tx_status;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册