提交 2f448911 编写于 作者: A Andy Fleming 提交者: Jeff Garzik

gianfar: Fix Rx/Tx HW interrupt coalescing counter reset procedure.

- Fix Rx/Tx HW interrupt coalescing counter reset logic. Disabling
is required before resetting the counter.

- Update the Default both Rx and Tx coalescing timer
threshold. Formerly 4 is set which is equal to 1.5 frame at the line
rate of 1GbE interface, and it doesn't match to the coalescing frame
count which is set to 16. Threashold 21 is matched to frame count 16.
Signed-off-by: NDai Haruki <dai.haruki@freescale.com>
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
上级 99da5003
......@@ -1299,11 +1299,11 @@ static irqreturn_t gfar_transmit(int irq, void *dev_id)
/* If we are coalescing the interrupts, reset the timer */
/* Otherwise, clear it */
if (priv->txcoalescing)
if (likely(priv->txcoalescing)) {
gfar_write(&priv->regs->txic, 0);
gfar_write(&priv->regs->txic,
mk_ic_value(priv->txcount, priv->txtime));
else
gfar_write(&priv->regs->txic, 0);
}
spin_unlock(&priv->txlock);
......@@ -1417,11 +1417,11 @@ irqreturn_t gfar_receive(int irq, void *dev_id)
/* If we are coalescing interrupts, update the timer */
/* Otherwise, clear it */
if (priv->rxcoalescing)
if (likely(priv->rxcoalescing)) {
gfar_write(&priv->regs->rxic, 0);
gfar_write(&priv->regs->rxic,
mk_ic_value(priv->rxcount, priv->rxtime));
else
gfar_write(&priv->regs->rxic, 0);
}
spin_unlock_irqrestore(&priv->rxlock, flags);
#endif
......@@ -1593,11 +1593,11 @@ static int gfar_poll(struct napi_struct *napi, int budget)
/* If we are coalescing interrupts, update the timer */
/* Otherwise, clear it */
if (priv->rxcoalescing)
if (likely(priv->rxcoalescing)) {
gfar_write(&priv->regs->rxic, 0);
gfar_write(&priv->regs->rxic,
mk_ic_value(priv->rxcount, priv->rxtime));
else
gfar_write(&priv->regs->rxic, 0);
}
}
return howmany;
......
......@@ -124,11 +124,11 @@ extern const char gfar_driver_version[];
#define DEFAULT_TX_COALESCE 1
#define DEFAULT_TXCOUNT 16
#define DEFAULT_TXTIME 4
#define DEFAULT_TXTIME 21
#define DEFAULT_RX_COALESCE 1
#define DEFAULT_RXCOUNT 16
#define DEFAULT_RXTIME 4
#define DEFAULT_RXTIME 21
#define TBIPA_VALUE 0x1f
#define MIIMCFG_INIT_VALUE 0x00000007
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册