提交 2e17e1aa 编写于 作者: S stephen hemminger 提交者: David S. Miller

bnx2: convert to set_phys_id

In this case, need to add element to device private to hold
original led state.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 6d8a7e6f
......@@ -7495,41 +7495,39 @@ bnx2_get_ethtool_stats(struct net_device *dev,
}
static int
bnx2_phys_id(struct net_device *dev, u32 data)
bnx2_set_phys_id(struct net_device *dev, enum ethtool_phys_id_state state)
{
struct bnx2 *bp = netdev_priv(dev);
int i;
u32 save;
bnx2_set_power_state(bp, PCI_D0);
switch (state) {
case ETHTOOL_ID_ACTIVE:
bnx2_set_power_state(bp, PCI_D0);
if (data == 0)
data = 2;
bp->leds_save = REG_RD(bp, BNX2_MISC_CFG);
REG_WR(bp, BNX2_MISC_CFG, BNX2_MISC_CFG_LEDMODE_MAC);
return -EINVAL;
save = REG_RD(bp, BNX2_MISC_CFG);
REG_WR(bp, BNX2_MISC_CFG, BNX2_MISC_CFG_LEDMODE_MAC);
case ETHTOOL_ID_ON:
REG_WR(bp, BNX2_EMAC_LED, BNX2_EMAC_LED_OVERRIDE |
BNX2_EMAC_LED_1000MB_OVERRIDE |
BNX2_EMAC_LED_100MB_OVERRIDE |
BNX2_EMAC_LED_10MB_OVERRIDE |
BNX2_EMAC_LED_TRAFFIC_OVERRIDE |
BNX2_EMAC_LED_TRAFFIC);
break;
for (i = 0; i < (data * 2); i++) {
if ((i % 2) == 0) {
REG_WR(bp, BNX2_EMAC_LED, BNX2_EMAC_LED_OVERRIDE);
}
else {
REG_WR(bp, BNX2_EMAC_LED, BNX2_EMAC_LED_OVERRIDE |
BNX2_EMAC_LED_1000MB_OVERRIDE |
BNX2_EMAC_LED_100MB_OVERRIDE |
BNX2_EMAC_LED_10MB_OVERRIDE |
BNX2_EMAC_LED_TRAFFIC_OVERRIDE |
BNX2_EMAC_LED_TRAFFIC);
}
msleep_interruptible(500);
if (signal_pending(current))
break;
}
REG_WR(bp, BNX2_EMAC_LED, 0);
REG_WR(bp, BNX2_MISC_CFG, save);
case ETHTOOL_ID_OFF:
REG_WR(bp, BNX2_EMAC_LED, BNX2_EMAC_LED_OVERRIDE);
break;
if (!netif_running(dev))
bnx2_set_power_state(bp, PCI_D3hot);
case ETHTOOL_ID_INACTIVE:
REG_WR(bp, BNX2_EMAC_LED, 0);
REG_WR(bp, BNX2_MISC_CFG, bp->leds_save);
if (!netif_running(dev))
bnx2_set_power_state(bp, PCI_D3hot);
break;
}
return 0;
}
......@@ -7602,7 +7600,7 @@ static const struct ethtool_ops bnx2_ethtool_ops = {
.set_tso = bnx2_set_tso,
.self_test = bnx2_self_test,
.get_strings = bnx2_get_strings,
.phys_id = bnx2_phys_id,
.set_phys_id = bnx2_set_phys_id,
.get_ethtool_stats = bnx2_get_ethtool_stats,
.get_sset_count = bnx2_get_sset_count,
.set_flags = bnx2_set_flags,
......
......@@ -6922,6 +6922,7 @@ struct bnx2 {
u8 num_tx_rings;
u8 num_rx_rings;
u32 leds_save;
u32 idle_chk_status_idx;
#ifdef BCM_CNIC
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册