提交 2cf22218 编写于 作者: J Johan Hedberg 提交者: Marcel Holtmann

Bluetooth: Add hci_request support for hci_update_background_scan

Many places using hci_update_background_scan() try to synchronize
whatever they're doing with the help of hci_request callbacks. However,
since the hci_update_background_scan() function hasn't so far accepted a
hci_request pointer any commands triggered by it have been left out by
the synchronization. This patch modifies the API in a similar way as was
done for hci_update_page_scan, i.e. there's a variant that takes a
hci_request and another one that takes a hci_dev.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
上级 0857dd3b
......@@ -930,8 +930,6 @@ struct hci_conn_params *hci_pend_le_action_lookup(struct list_head *list,
bdaddr_t *addr,
u8 addr_type);
void hci_update_background_scan(struct hci_dev *hdev);
void hci_uuids_clear(struct hci_dev *hdev);
void hci_link_keys_clear(struct hci_dev *hdev);
......
......@@ -5312,95 +5312,6 @@ static void hci_cmd_work(struct work_struct *work)
}
}
static void update_background_scan_complete(struct hci_dev *hdev, u8 status)
{
if (status)
BT_DBG("HCI request failed to update background scanning: "
"status 0x%2.2x", status);
}
/* This function controls the background scanning based on hdev->pend_le_conns
* list. If there are pending LE connection we start the background scanning,
* otherwise we stop it.
*
* This function requires the caller holds hdev->lock.
*/
void hci_update_background_scan(struct hci_dev *hdev)
{
struct hci_request req;
struct hci_conn *conn;
int err;
if (!test_bit(HCI_UP, &hdev->flags) ||
test_bit(HCI_INIT, &hdev->flags) ||
test_bit(HCI_SETUP, &hdev->dev_flags) ||
test_bit(HCI_CONFIG, &hdev->dev_flags) ||
test_bit(HCI_AUTO_OFF, &hdev->dev_flags) ||
test_bit(HCI_UNREGISTER, &hdev->dev_flags))
return;
/* No point in doing scanning if LE support hasn't been enabled */
if (!test_bit(HCI_LE_ENABLED, &hdev->dev_flags))
return;
/* If discovery is active don't interfere with it */
if (hdev->discovery.state != DISCOVERY_STOPPED)
return;
/* Reset RSSI and UUID filters when starting background scanning
* since these filters are meant for service discovery only.
*
* The Start Discovery and Start Service Discovery operations
* ensure to set proper values for RSSI threshold and UUID
* filter list. So it is safe to just reset them here.
*/
hci_discovery_filter_clear(hdev);
hci_req_init(&req, hdev);
if (list_empty(&hdev->pend_le_conns) &&
list_empty(&hdev->pend_le_reports)) {
/* If there is no pending LE connections or devices
* to be scanned for, we should stop the background
* scanning.
*/
/* If controller is not scanning we are done. */
if (!test_bit(HCI_LE_SCAN, &hdev->dev_flags))
return;
hci_req_add_le_scan_disable(&req);
BT_DBG("%s stopping background scanning", hdev->name);
} else {
/* If there is at least one pending LE connection, we should
* keep the background scan running.
*/
/* If controller is connecting, we should not start scanning
* since some controllers are not able to scan and connect at
* the same time.
*/
conn = hci_conn_hash_lookup_state(hdev, LE_LINK, BT_CONNECT);
if (conn)
return;
/* If controller is currently scanning, we stop it to ensure we
* don't miss any advertising (due to duplicates filter).
*/
if (test_bit(HCI_LE_SCAN, &hdev->dev_flags))
hci_req_add_le_scan_disable(&req);
hci_req_add_le_passive_scan(&req);
BT_DBG("%s starting background scanning", hdev->name);
}
err = hci_req_run(&req, update_background_scan_complete);
if (err)
BT_ERR("Failed to run HCI request: err %d", err);
}
static bool disconnected_whitelist_entries(struct hci_dev *hdev)
{
struct bdaddr_list *b;
......
......@@ -395,3 +395,99 @@ int hci_update_random_address(struct hci_request *req, bool require_privacy,
return 0;
}
/* This function controls the background scanning based on hdev->pend_le_conns
* list. If there are pending LE connection we start the background scanning,
* otherwise we stop it.
*
* This function requires the caller holds hdev->lock.
*/
void __hci_update_background_scan(struct hci_request *req)
{
struct hci_dev *hdev = req->hdev;
struct hci_conn *conn;
if (!test_bit(HCI_UP, &hdev->flags) ||
test_bit(HCI_INIT, &hdev->flags) ||
test_bit(HCI_SETUP, &hdev->dev_flags) ||
test_bit(HCI_CONFIG, &hdev->dev_flags) ||
test_bit(HCI_AUTO_OFF, &hdev->dev_flags) ||
test_bit(HCI_UNREGISTER, &hdev->dev_flags))
return;
/* No point in doing scanning if LE support hasn't been enabled */
if (!test_bit(HCI_LE_ENABLED, &hdev->dev_flags))
return;
/* If discovery is active don't interfere with it */
if (hdev->discovery.state != DISCOVERY_STOPPED)
return;
/* Reset RSSI and UUID filters when starting background scanning
* since these filters are meant for service discovery only.
*
* The Start Discovery and Start Service Discovery operations
* ensure to set proper values for RSSI threshold and UUID
* filter list. So it is safe to just reset them here.
*/
hci_discovery_filter_clear(hdev);
if (list_empty(&hdev->pend_le_conns) &&
list_empty(&hdev->pend_le_reports)) {
/* If there is no pending LE connections or devices
* to be scanned for, we should stop the background
* scanning.
*/
/* If controller is not scanning we are done. */
if (!test_bit(HCI_LE_SCAN, &hdev->dev_flags))
return;
hci_req_add_le_scan_disable(req);
BT_DBG("%s stopping background scanning", hdev->name);
} else {
/* If there is at least one pending LE connection, we should
* keep the background scan running.
*/
/* If controller is connecting, we should not start scanning
* since some controllers are not able to scan and connect at
* the same time.
*/
conn = hci_conn_hash_lookup_state(hdev, LE_LINK, BT_CONNECT);
if (conn)
return;
/* If controller is currently scanning, we stop it to ensure we
* don't miss any advertising (due to duplicates filter).
*/
if (test_bit(HCI_LE_SCAN, &hdev->dev_flags))
hci_req_add_le_scan_disable(req);
hci_req_add_le_passive_scan(req);
BT_DBG("%s starting background scanning", hdev->name);
}
}
static void update_background_scan_complete(struct hci_dev *hdev, u8 status)
{
if (status)
BT_DBG("HCI request failed to update background scanning: "
"status 0x%2.2x", status);
}
void hci_update_background_scan(struct hci_dev *hdev)
{
int err;
struct hci_request req;
hci_req_init(&req, hdev);
__hci_update_background_scan(&req);
err = hci_req_run(&req, update_background_scan_complete);
if (err && err != -ENODATA)
BT_ERR("Failed to run HCI request: err %d", err);
}
......@@ -49,3 +49,6 @@ void __hci_update_page_scan(struct hci_request *req);
int hci_update_random_address(struct hci_request *req, bool require_privacy,
u8 *own_addr_type);
void hci_update_background_scan(struct hci_dev *hdev);
void __hci_update_background_scan(struct hci_request *req);
......@@ -2228,9 +2228,8 @@ static void le_enable_complete(struct hci_dev *hdev, u8 status)
hci_req_init(&req, hdev);
update_adv_data(&req);
update_scan_rsp_data(&req);
__hci_update_background_scan(&req);
hci_req_run(&req, NULL);
hci_update_background_scan(hdev);
}
unlock:
......@@ -6038,8 +6037,9 @@ void mgmt_index_removed(struct hci_dev *hdev)
}
/* This function requires the caller holds hdev->lock */
static void restart_le_actions(struct hci_dev *hdev)
static void restart_le_actions(struct hci_request *req)
{
struct hci_dev *hdev = req->hdev;
struct hci_conn_params *p;
list_for_each_entry(p, &hdev->le_conn_params, list) {
......@@ -6061,7 +6061,7 @@ static void restart_le_actions(struct hci_dev *hdev)
}
}
hci_update_background_scan(hdev);
__hci_update_background_scan(req);
}
static void powered_complete(struct hci_dev *hdev, u8 status)
......@@ -6072,8 +6072,6 @@ static void powered_complete(struct hci_dev *hdev, u8 status)
hci_dev_lock(hdev);
restart_le_actions(hdev);
mgmt_pending_foreach(MGMT_OP_SET_POWERED, hdev, settings_rsp, &match);
new_settings(hdev, match.sk);
......@@ -6131,6 +6129,8 @@ static int powered_update_hci(struct hci_dev *hdev)
if (test_bit(HCI_ADVERTISING, &hdev->dev_flags))
enable_advertising(&req);
restart_le_actions(&req);
}
link_sec = test_bit(HCI_LINK_SECURITY, &hdev->dev_flags);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册