提交 2bd1dd39 编写于 作者: T Thierry Reding

drm/tegra: sor: Extract tegra_sor_mode_set()

The code to set a video mode is common to all types of outputs that the
SOR can drive. Extract it into a separate function so that it can be
shared.
Signed-off-by: NThierry Reding <treding@nvidia.com>
上级 402f6bcd
......@@ -718,6 +718,83 @@ static void tegra_sor_apply_config(struct tegra_sor *sor,
tegra_sor_writel(sor, value, SOR_DP_AUDIO_VBLANK_SYMBOLS);
}
static void tegra_sor_mode_set(struct tegra_sor *sor,
const struct drm_display_mode *mode,
const struct drm_display_info *info)
{
struct tegra_dc *dc = to_tegra_dc(sor->output.encoder.crtc);
unsigned int vbe, vse, hbe, hse, vbs, hbs;
u32 value;
value = tegra_sor_readl(sor, SOR_STATE1);
value &= ~SOR_STATE_ASY_PIXELDEPTH_MASK;
value &= ~SOR_STATE_ASY_CRC_MODE_MASK;
value &= ~SOR_STATE_ASY_OWNER_MASK;
value |= SOR_STATE_ASY_CRC_MODE_COMPLETE |
SOR_STATE_ASY_OWNER(dc->pipe + 1);
if (mode->flags & DRM_MODE_FLAG_PHSYNC)
value &= ~SOR_STATE_ASY_HSYNCPOL;
if (mode->flags & DRM_MODE_FLAG_NHSYNC)
value |= SOR_STATE_ASY_HSYNCPOL;
if (mode->flags & DRM_MODE_FLAG_PVSYNC)
value &= ~SOR_STATE_ASY_VSYNCPOL;
if (mode->flags & DRM_MODE_FLAG_NVSYNC)
value |= SOR_STATE_ASY_VSYNCPOL;
switch (info->bpc) {
case 8:
value |= SOR_STATE_ASY_PIXELDEPTH_BPP_24_444;
break;
case 6:
value |= SOR_STATE_ASY_PIXELDEPTH_BPP_18_444;
break;
default:
BUG();
break;
}
tegra_sor_writel(sor, value, SOR_STATE1);
/*
* TODO: The video timing programming below doesn't seem to match the
* register definitions.
*/
value = ((mode->vtotal & 0x7fff) << 16) | (mode->htotal & 0x7fff);
tegra_sor_writel(sor, value, SOR_HEAD_STATE1(dc->pipe));
/* sync end = sync width - 1 */
vse = mode->vsync_end - mode->vsync_start - 1;
hse = mode->hsync_end - mode->hsync_start - 1;
value = ((vse & 0x7fff) << 16) | (hse & 0x7fff);
tegra_sor_writel(sor, value, SOR_HEAD_STATE2(dc->pipe));
/* blank end = sync end + back porch */
vbe = vse + (mode->vtotal - mode->vsync_end);
hbe = hse + (mode->htotal - mode->hsync_end);
value = ((vbe & 0x7fff) << 16) | (hbe & 0x7fff);
tegra_sor_writel(sor, value, SOR_HEAD_STATE3(dc->pipe));
/* blank start = blank end + active */
vbs = vbe + mode->vdisplay;
hbs = hbe + mode->hdisplay;
value = ((vbs & 0x7fff) << 16) | (hbs & 0x7fff);
tegra_sor_writel(sor, value, SOR_HEAD_STATE4(dc->pipe));
/* XXX interlacing support */
tegra_sor_writel(sor, 0x001, SOR_HEAD_STATE5(dc->pipe));
}
static int tegra_sor_detach(struct tegra_sor *sor)
{
unsigned long value, timeout;
......@@ -1250,14 +1327,17 @@ static void tegra_sor_edp_enable(struct drm_encoder *encoder)
struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
struct tegra_output *output = encoder_to_output(encoder);
struct tegra_dc *dc = to_tegra_dc(encoder->crtc);
unsigned int vbe, vse, hbe, hse, vbs, hbs, i;
struct tegra_sor *sor = to_sor(output);
struct tegra_sor_config config;
struct drm_display_info *info;
struct drm_dp_link link;
u8 rate, lanes;
unsigned int i;
int err = 0;
u32 value;
info = &output->connector.display_info;
err = clk_prepare_enable(sor->clk);
if (err < 0)
dev_err(sor->dev, "failed to enable clock: %d\n", err);
......@@ -1505,75 +1585,19 @@ static void tegra_sor_edp_enable(struct drm_encoder *encoder)
if (err < 0)
dev_err(sor->dev, "failed to power up SOR: %d\n", err);
/*
* configure panel (24bpp, vsync-, hsync-, DP-A protocol, complete
* raster, associate with display controller)
*/
value = SOR_STATE_ASY_PROTOCOL_DP_A |
SOR_STATE_ASY_CRC_MODE_COMPLETE |
SOR_STATE_ASY_OWNER(dc->pipe + 1);
if (mode->flags & DRM_MODE_FLAG_PHSYNC)
value &= ~SOR_STATE_ASY_HSYNCPOL;
if (mode->flags & DRM_MODE_FLAG_NHSYNC)
value |= SOR_STATE_ASY_HSYNCPOL;
if (mode->flags & DRM_MODE_FLAG_PVSYNC)
value &= ~SOR_STATE_ASY_VSYNCPOL;
if (mode->flags & DRM_MODE_FLAG_NVSYNC)
value |= SOR_STATE_ASY_VSYNCPOL;
switch (config.bits_per_pixel) {
case 24:
value |= SOR_STATE_ASY_PIXELDEPTH_BPP_24_444;
break;
case 18:
value |= SOR_STATE_ASY_PIXELDEPTH_BPP_18_444;
break;
default:
BUG();
break;
}
tegra_sor_writel(sor, value, SOR_STATE1);
/*
* TODO: The video timing programming below doesn't seem to match the
* register definitions.
*/
value = ((mode->vtotal & 0x7fff) << 16) | (mode->htotal & 0x7fff);
tegra_sor_writel(sor, value, SOR_HEAD_STATE1(dc->pipe));
vse = mode->vsync_end - mode->vsync_start - 1;
hse = mode->hsync_end - mode->hsync_start - 1;
value = ((vse & 0x7fff) << 16) | (hse & 0x7fff);
tegra_sor_writel(sor, value, SOR_HEAD_STATE2(dc->pipe));
vbe = vse + (mode->vsync_start - mode->vdisplay);
hbe = hse + (mode->hsync_start - mode->hdisplay);
value = ((vbe & 0x7fff) << 16) | (hbe & 0x7fff);
tegra_sor_writel(sor, value, SOR_HEAD_STATE3(dc->pipe));
vbs = vbe + mode->vdisplay;
hbs = hbe + mode->hdisplay;
value = ((vbs & 0x7fff) << 16) | (hbs & 0x7fff);
tegra_sor_writel(sor, value, SOR_HEAD_STATE4(dc->pipe));
tegra_sor_writel(sor, 0x1, SOR_HEAD_STATE5(dc->pipe));
/* CSTM (LVDS, link A/B, upper) */
value = SOR_CSTM_LVDS | SOR_CSTM_LINK_ACT_A | SOR_CSTM_LINK_ACT_B |
SOR_CSTM_UPPER;
tegra_sor_writel(sor, value, SOR_CSTM);
/* use DP-A protocol */
value = tegra_sor_readl(sor, SOR_STATE1);
value &= ~SOR_STATE_ASY_PROTOCOL_MASK;
value |= SOR_STATE_ASY_PROTOCOL_DP_A;
tegra_sor_writel(sor, value, SOR_STATE1);
tegra_sor_mode_set(sor, mode, info);
/* PWM setup */
err = tegra_sor_setup_pwm(sor, 250);
if (err < 0)
......@@ -1789,11 +1813,11 @@ static void tegra_sor_hdmi_enable(struct drm_encoder *encoder)
struct tegra_output *output = encoder_to_output(encoder);
unsigned int h_ref_to_sync = 1, pulse_start, max_ac;
struct tegra_dc *dc = to_tegra_dc(encoder->crtc);
unsigned int vbe, vse, hbe, hse, vbs, hbs, div;
struct tegra_sor_hdmi_settings *settings;
struct tegra_sor *sor = to_sor(output);
struct drm_display_mode *mode;
struct drm_display_info *info;
unsigned int div;
u32 value;
int err;
......@@ -2051,83 +2075,19 @@ static void tegra_sor_hdmi_enable(struct drm_encoder *encoder)
if (err < 0)
dev_err(sor->dev, "failed to power up SOR: %d\n", err);
/* configure mode */
value = tegra_sor_readl(sor, SOR_STATE1);
value &= ~SOR_STATE_ASY_PIXELDEPTH_MASK;
value &= ~SOR_STATE_ASY_CRC_MODE_MASK;
value &= ~SOR_STATE_ASY_OWNER_MASK;
value |= SOR_STATE_ASY_CRC_MODE_COMPLETE |
SOR_STATE_ASY_OWNER(dc->pipe + 1);
if (mode->flags & DRM_MODE_FLAG_PHSYNC)
value &= ~SOR_STATE_ASY_HSYNCPOL;
if (mode->flags & DRM_MODE_FLAG_NHSYNC)
value |= SOR_STATE_ASY_HSYNCPOL;
if (mode->flags & DRM_MODE_FLAG_PVSYNC)
value &= ~SOR_STATE_ASY_VSYNCPOL;
if (mode->flags & DRM_MODE_FLAG_NVSYNC)
value |= SOR_STATE_ASY_VSYNCPOL;
switch (info->bpc) {
case 8:
value |= SOR_STATE_ASY_PIXELDEPTH_BPP_24_444;
break;
case 6:
value |= SOR_STATE_ASY_PIXELDEPTH_BPP_18_444;
break;
default:
BUG();
break;
}
tegra_sor_writel(sor, value, SOR_STATE1);
/* configure dynamic range of output */
value = tegra_sor_readl(sor, SOR_HEAD_STATE0(dc->pipe));
value &= ~SOR_HEAD_STATE_RANGECOMPRESS_MASK;
value &= ~SOR_HEAD_STATE_DYNRANGE_MASK;
tegra_sor_writel(sor, value, SOR_HEAD_STATE0(dc->pipe));
/* configure colorspace */
value = tegra_sor_readl(sor, SOR_HEAD_STATE0(dc->pipe));
value &= ~SOR_HEAD_STATE_COLORSPACE_MASK;
value |= SOR_HEAD_STATE_COLORSPACE_RGB;
tegra_sor_writel(sor, value, SOR_HEAD_STATE0(dc->pipe));
/*
* TODO: The video timing programming below doesn't seem to match the
* register definitions.
*/
value = ((mode->vtotal & 0x7fff) << 16) | (mode->htotal & 0x7fff);
tegra_sor_writel(sor, value, SOR_HEAD_STATE1(dc->pipe));
/* sync end = sync width - 1 */
vse = mode->vsync_end - mode->vsync_start - 1;
hse = mode->hsync_end - mode->hsync_start - 1;
value = ((vse & 0x7fff) << 16) | (hse & 0x7fff);
tegra_sor_writel(sor, value, SOR_HEAD_STATE2(dc->pipe));
/* blank end = sync end + back porch */
vbe = vse + (mode->vtotal - mode->vsync_end);
hbe = hse + (mode->htotal - mode->hsync_end);
value = ((vbe & 0x7fff) << 16) | (hbe & 0x7fff);
tegra_sor_writel(sor, value, SOR_HEAD_STATE3(dc->pipe));
/* blank start = blank end + active */
vbs = vbe + mode->vdisplay;
hbs = hbe + mode->hdisplay;
value = ((vbs & 0x7fff) << 16) | (hbs & 0x7fff);
tegra_sor_writel(sor, value, SOR_HEAD_STATE4(dc->pipe));
tegra_sor_writel(sor, 0x1, SOR_HEAD_STATE5(dc->pipe));
tegra_sor_mode_set(sor, mode, info);
tegra_sor_update(sor);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册