提交 2bae0093 编写于 作者: T Tejun Heo 提交者: James Bottomley

[SCSI] sd: implement sd_check_events()

Replace sd_media_change() with sd_check_events().

* Move media removed logic into set_media_not_present() and
  media_not_present() and set sdev->changed iff an existing media is
  removed or the device indicates UNIT_ATTENTION.

* Make sd_check_events() sets sdev->changed if previously missing
  media becomes present.

* Event is reported only if sdev->changed is set.

This makes media presence event reported if scsi_disk->media_present
actually changed or the device indicated UNIT_ATTENTION.  For backward
compatibility, SDEV_EVT_MEDIA_CHANGE is generated each time
sd_check_events() detects media change event.

[jejb: fix boot failure]
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NJens Axboe <jaxboe@fusionio.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
上级 52cfd503
......@@ -990,30 +990,51 @@ static int sd_ioctl(struct block_device *bdev, fmode_t mode,
static void set_media_not_present(struct scsi_disk *sdkp)
{
sdkp->media_present = 0;
sdkp->capacity = 0;
sdkp->device->changed = 1;
if (sdkp->media_present)
sdkp->device->changed = 1;
if (sdkp->device->removable) {
sdkp->media_present = 0;
sdkp->capacity = 0;
}
}
static int media_not_present(struct scsi_disk *sdkp,
struct scsi_sense_hdr *sshdr)
{
if (!scsi_sense_valid(sshdr))
return 0;
/* not invoked for commands that could return deferred errors */
switch (sshdr->sense_key) {
case UNIT_ATTENTION:
case NOT_READY:
/* medium not present */
if (sshdr->asc == 0x3A) {
set_media_not_present(sdkp);
return 1;
}
}
return 0;
}
/**
* sd_media_changed - check if our medium changed
* @disk: kernel device descriptor
* sd_check_events - check media events
* @disk: kernel device descriptor
* @clearing: disk events currently being cleared
*
* Returns 0 if not applicable or no change; 1 if change
* Returns mask of DISK_EVENT_*.
*
* Note: this function is invoked from the block subsystem.
**/
static int sd_media_changed(struct gendisk *disk)
static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing)
{
struct scsi_disk *sdkp = scsi_disk(disk);
struct scsi_device *sdp = sdkp->device;
struct scsi_sense_hdr *sshdr = NULL;
int retval;
SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_media_changed\n"));
if (!sdp->removable)
return 0;
SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_check_events\n"));
/*
* If the device is offline, don't send any commands - just pretend as
......@@ -1043,40 +1064,37 @@ static int sd_media_changed(struct gendisk *disk)
sshdr);
}
if (retval) {
/* failed to execute TUR, assume media not present */
if (host_byte(retval)) {
set_media_not_present(sdkp);
goto out;
}
if (media_not_present(sdkp, sshdr))
goto out;
/*
* For removable scsi disk we have to recognise the presence
* of a disk in the drive. This is kept in the struct scsi_disk
* struct and tested at open ! Daniel Roche (dan@lectra.fr)
* of a disk in the drive.
*/
if (!sdkp->media_present)
sdp->changed = 1;
sdkp->media_present = 1;
out:
/*
* Report a media change under the following conditions:
* sdp->changed is set under the following conditions:
*
* Medium is present now and wasn't present before.
* Medium wasn't present before and is present now.
* Medium was present at all times, but it changed while
* we weren't looking (sdp->changed is set).
* Medium present state has changed in either direction.
* Device has indicated UNIT_ATTENTION.
*
* If there was no medium before and there is no medium now then
* don't report a change, even if a medium was inserted and removed
* while we weren't looking.
* Report SDEV_EVT_MEDIA_CHANGE too for backward compatibility.
*/
retval = (sdkp->media_present != sdkp->previous_state ||
(sdkp->media_present && sdp->changed));
if (retval)
if (sdp->changed)
sdev_evt_send_simple(sdp, SDEV_EVT_MEDIA_CHANGE, GFP_KERNEL);
sdkp->previous_state = sdkp->media_present;
/* sdp->changed indicates medium was changed or is not present */
sdp->changed = !sdkp->media_present;
kfree(sshdr);
retval = sdp->changed ? DISK_EVENT_MEDIA_CHANGE : 0;
sdp->changed = 0;
return retval;
}
......@@ -1169,7 +1187,7 @@ static const struct block_device_operations sd_fops = {
#ifdef CONFIG_COMPAT
.compat_ioctl = sd_compat_ioctl,
#endif
.media_changed = sd_media_changed,
.check_events = sd_check_events,
.revalidate_disk = sd_revalidate_disk,
.unlock_native_capacity = sd_unlock_native_capacity,
};
......@@ -1312,23 +1330,6 @@ static int sd_done(struct scsi_cmnd *SCpnt)
return good_bytes;
}
static int media_not_present(struct scsi_disk *sdkp,
struct scsi_sense_hdr *sshdr)
{
if (!scsi_sense_valid(sshdr))
return 0;
/* not invoked for commands that could return deferred errors */
if (sshdr->sense_key != NOT_READY &&
sshdr->sense_key != UNIT_ATTENTION)
return 0;
if (sshdr->asc != 0x3A) /* medium not present */
return 0;
set_media_not_present(sdkp);
return 1;
}
/*
* spinup disk - called only in sd_revalidate_disk()
*/
......@@ -1503,7 +1504,7 @@ static void read_capacity_error(struct scsi_disk *sdkp, struct scsi_device *sdp,
*/
if (sdp->removable &&
sense_valid && sshdr->sense_key == NOT_READY)
sdp->changed = 1;
set_media_not_present(sdkp);
/*
* We used to set media_present to 0 here to indicate no media
......@@ -2389,8 +2390,10 @@ static void sd_probe_async(void *data, async_cookie_t cookie)
gd->driverfs_dev = &sdp->sdev_gendev;
gd->flags = GENHD_FL_EXT_DEVT;
if (sdp->removable)
if (sdp->removable) {
gd->flags |= GENHD_FL_REMOVABLE;
gd->events |= DISK_EVENT_MEDIA_CHANGE;
}
add_disk(gd);
sd_dif_config_host(sdkp);
......@@ -2472,7 +2475,6 @@ static int sd_probe(struct device *dev)
sdkp->disk = gd;
sdkp->index = index;
atomic_set(&sdkp->openers, 0);
sdkp->previous_state = 1;
if (!sdp->request_queue->rq_timeout) {
if (sdp->type != TYPE_MOD)
......
......@@ -55,7 +55,6 @@ struct scsi_disk {
u8 media_present;
u8 write_prot;
u8 protection_type;/* Data Integrity Field */
unsigned previous_state : 1;
unsigned ATO : 1; /* state of disk ATO bit */
unsigned WCE : 1; /* state of disk WCE bit */
unsigned RCD : 1; /* state of disk RCD bit, unused */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册