提交 2b26dd4c 编写于 作者: O Oder Chiou 提交者: Mark Brown

ASoC: rt5660: add rt5660 codec driver

This is the initial codec driver for rt5660
Signed-off-by: NOder Chiou <oder_chiou@realtek.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
上级 29b4817d
RT5660 audio CODEC
This device supports I2C only.
Required properties:
- compatible : "realtek,rt5660".
- reg : The I2C address of the device.
Optional properties:
- clocks: The phandle of the master clock to the CODEC
- clock-names: Should be "mclk"
- realtek,in1-differential
- realtek,in3-differential
Boolean. Indicate MIC1/3 input are differential, rather than single-ended.
- realtek,poweroff-in-suspend
Boolean. If the codec will be powered off in suspend, the resume should be
added delay time for waiting codec power ready.
- realtek,dmic1-data-pin
0: dmic1 is not used
1: using GPIO2 pin as dmic1 data pin
2: using IN1P pin as dmic1 data pin
Pins on the device (for linking into audio routes) for RT5660:
* DMIC L1
* DMIC R1
* IN1P
* IN1N
* IN2P
* IN3P
* IN3N
* SPO
* LOUTL
* LOUTR
Example:
rt5660 {
compatible = "realtek,rt5660";
reg = <0x1c>;
};
/*
* linux/sound/rt5660.h -- Platform data for RT5660
*
* Copyright 2016 Realtek Semiconductor Corp.
* Author: Oder Chiou <oder_chiou@realtek.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __LINUX_SND_RT5660_H
#define __LINUX_SND_RT5660_H
enum rt5660_dmic1_data_pin {
RT5660_DMIC1_NULL,
RT5660_DMIC1_DATA_GPIO2,
RT5660_DMIC1_DATA_IN1P,
};
struct rt5660_platform_data {
/* IN1 & IN3 can optionally be differential */
bool in1_diff;
bool in3_diff;
bool use_ldo2;
bool poweroff_codec_in_suspend;
enum rt5660_dmic1_data_pin dmic1_data_pin;
};
#endif
......@@ -112,6 +112,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_RT5645 if I2C
select SND_SOC_RT5651 if I2C
select SND_SOC_RT5659 if I2C
select SND_SOC_RT5660 if I2C
select SND_SOC_RT5670 if I2C
select SND_SOC_RT5677 if I2C && SPI_MASTER
select SND_SOC_SGTL5000 if I2C
......@@ -645,6 +646,7 @@ config SND_SOC_RL6231
default y if SND_SOC_RT5645=y
default y if SND_SOC_RT5651=y
default y if SND_SOC_RT5659=y
default y if SND_SOC_RT5660=y
default y if SND_SOC_RT5670=y
default y if SND_SOC_RT5677=y
default m if SND_SOC_RT5514=m
......@@ -653,6 +655,7 @@ config SND_SOC_RL6231
default m if SND_SOC_RT5645=m
default m if SND_SOC_RT5651=m
default m if SND_SOC_RT5659=m
default m if SND_SOC_RT5660=m
default m if SND_SOC_RT5670=m
default m if SND_SOC_RT5677=m
......@@ -697,6 +700,9 @@ config SND_SOC_RT5651
config SND_SOC_RT5659
tristate
config SND_SOC_RT5660
tristate
config SND_SOC_RT5670
tristate
......
......@@ -112,6 +112,7 @@ snd-soc-rt5640-objs := rt5640.o
snd-soc-rt5645-objs := rt5645.o
snd-soc-rt5651-objs := rt5651.o
snd-soc-rt5659-objs := rt5659.o
snd-soc-rt5660-objs := rt5660.o
snd-soc-rt5670-objs := rt5670.o
snd-soc-rt5677-objs := rt5677.o
snd-soc-rt5677-spi-objs := rt5677-spi.o
......@@ -333,6 +334,7 @@ obj-$(CONFIG_SND_SOC_RT5640) += snd-soc-rt5640.o
obj-$(CONFIG_SND_SOC_RT5645) += snd-soc-rt5645.o
obj-$(CONFIG_SND_SOC_RT5651) += snd-soc-rt5651.o
obj-$(CONFIG_SND_SOC_RT5659) += snd-soc-rt5659.o
obj-$(CONFIG_SND_SOC_RT5660) += snd-soc-rt5660.o
obj-$(CONFIG_SND_SOC_RT5670) += snd-soc-rt5670.o
obj-$(CONFIG_SND_SOC_RT5677) += snd-soc-rt5677.o
obj-$(CONFIG_SND_SOC_RT5677_SPI) += snd-soc-rt5677-spi.o
......
此差异已折叠。
此差异已折叠。
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册