提交 2aeeef11 编写于 作者: K Kenji Kaneshige 提交者: Jesse Barnes

pciehp: Clean up pcie_init()

Clean up pciehp_ini(). This patch is trying to

  - Remove redundant capablity checks that were already done in PCIe
    port bus driver.
  - Separate the code only for debugging and make debug information
    easier to read.
  - Make the entire code easier to read and understand what it is doing.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
上级 d84be093
......@@ -221,6 +221,32 @@ static void start_int_poll_timer(struct controller *ctrl, int sec)
add_timer(&ctrl->poll_timer);
}
static inline int pciehp_request_irq(struct controller *ctrl)
{
int retval, irq = ctrl->pci_dev->irq;
/* Install interrupt polling timer. Start with 10 sec delay */
if (pciehp_poll_mode) {
init_timer(&ctrl->poll_timer);
start_int_poll_timer(ctrl, 10);
return 0;
}
/* Installs the interrupt handler */
retval = request_irq(irq, pcie_isr, IRQF_SHARED, MY_NAME, ctrl);
if (retval)
err("Cannot get irq %d for the hotplug controller\n", irq);
return retval;
}
static inline void pciehp_free_irq(struct controller *ctrl)
{
if (pciehp_poll_mode)
del_timer_sync(&ctrl->poll_timer);
else
free_irq(ctrl->pci_dev->irq, ctrl);
}
static inline int pcie_wait_cmd(struct controller *ctrl)
{
int retval = 0;
......@@ -541,10 +567,8 @@ static void hpc_release_ctlr(struct controller *ctrl)
if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE))
err("%s: Cannot mask hotplut interrupt enable\n", __func__);
if (pciehp_poll_mode)
del_timer(&ctrl->poll_timer);
else
free_irq(ctrl->pci_dev->irq, ctrl);
/* Free interrupt handler or interrupt polling timer */
pciehp_free_irq(ctrl);
/*
* If this is the last controller to be released, destroy the
......@@ -1057,121 +1081,79 @@ int pcie_init_hardware_part2(struct controller *ctrl, struct pcie_device *dev)
return -1;
}
int pcie_init(struct controller *ctrl, struct pcie_device *dev)
static inline void dbg_ctrl(struct controller *ctrl)
{
int rc;
u16 cap_reg;
u32 slot_cap;
int cap_base;
u16 slot_status, slot_ctrl;
struct pci_dev *pdev;
pdev = dev->port;
ctrl->pci_dev = pdev; /* save pci_dev in context */
int i;
u16 reg16;
struct pci_dev *pdev = ctrl->pci_dev;
dbg("%s: hotplug controller vendor id 0x%x device id 0x%x\n",
__func__, pdev->vendor, pdev->device);
if (!pciehp_debug)
return;
cap_base = pci_find_capability(pdev, PCI_CAP_ID_EXP);
if (cap_base == 0) {
dbg("%s: Can't find PCI_CAP_ID_EXP (0x10)\n", __func__);
goto abort;
dbg("Hotplug Controller:\n");
dbg(" Seg/Bus/Dev/Func/IRQ : %s IRQ %d\n", pci_name(pdev), pdev->irq);
dbg(" Vendor ID : 0x%04x\n", pdev->vendor);
dbg(" Device ID : 0x%04x\n", pdev->device);
dbg(" Subsystem ID : 0x%04x\n", pdev->subsystem_device);
dbg(" Subsystem Vendor ID : 0x%04x\n", pdev->subsystem_vendor);
dbg(" PCIe Cap offset : 0x%02x\n", ctrl->cap_base);
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
if (!pci_resource_len(pdev, i))
continue;
dbg(" PCI resource [%d] : 0x%llx@0x%llx\n", i,
(unsigned long long)pci_resource_len(pdev, i),
(unsigned long long)pci_resource_start(pdev, i));
}
dbg("Slot Capabilities : 0x%08x\n", ctrl->slot_cap);
dbg(" Physical Slot Number : %d\n", ctrl->first_slot);
dbg(" Attention Button : %3s\n", ATTN_BUTTN(ctrl) ? "yes" : "no");
dbg(" Power Controller : %3s\n", POWER_CTRL(ctrl) ? "yes" : "no");
dbg(" MRL Sensor : %3s\n", MRL_SENS(ctrl) ? "yes" : "no");
dbg(" Attention Indicator : %3s\n", ATTN_LED(ctrl) ? "yes" : "no");
dbg(" Power Indicator : %3s\n", PWR_LED(ctrl) ? "yes" : "no");
dbg(" Hot-Plug Surprise : %3s\n", HP_SUPR_RM(ctrl) ? "yes" : "no");
dbg(" EMI Present : %3s\n", EMI(ctrl) ? "yes" : "no");
pciehp_readw(ctrl, SLOTSTATUS, &reg16);
dbg("Slot Status : 0x%04x\n", reg16);
pciehp_readw(ctrl, SLOTSTATUS, &reg16);
dbg("Slot Control : 0x%04x\n", reg16);
}
ctrl->cap_base = cap_base;
dbg("%s: pcie_cap_base %x\n", __func__, cap_base);
int pcie_init(struct controller *ctrl, struct pcie_device *dev)
{
u32 slot_cap;
struct pci_dev *pdev = dev->port;
rc = pciehp_readw(ctrl, CAPREG, &cap_reg);
if (rc) {
err("%s: Cannot read CAPREG register\n", __func__);
goto abort;
}
dbg("%s: CAPREG offset %x cap_reg %x\n",
__func__, ctrl->cap_base + CAPREG, cap_reg);
if (((cap_reg & SLOT_IMPL) == 0) ||
(((cap_reg & DEV_PORT_TYPE) != 0x0040)
&& ((cap_reg & DEV_PORT_TYPE) != 0x0060))) {
dbg("%s : This is not a root port or the port is not "
"connected to a slot\n", __func__);
ctrl->pci_dev = pdev;
ctrl->cap_base = pci_find_capability(pdev, PCI_CAP_ID_EXP);
if (!ctrl->cap_base) {
err("%s: Cannot find PCI Express capability\n", __func__);
goto abort;
}
rc = pciehp_readl(ctrl, SLOTCAP, &slot_cap);
if (rc) {
if (pciehp_readl(ctrl, SLOTCAP, &slot_cap)) {
err("%s: Cannot read SLOTCAP register\n", __func__);
goto abort;
}
dbg("%s: SLOTCAP offset %x slot_cap %x\n",
__func__, ctrl->cap_base + SLOTCAP, slot_cap);
if (!(slot_cap & HP_CAP)) {
dbg("%s : This slot is not hot-plug capable\n", __func__);
goto abort;
}
/* For debugging purpose */
rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
if (rc) {
err("%s: Cannot read SLOTSTATUS register\n", __func__);
goto abort;
}
dbg("%s: SLOTSTATUS offset %x slot_status %x\n",
__func__, ctrl->cap_base + SLOTSTATUS, slot_status);
rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
if (rc) {
err("%s: Cannot read SLOTCTRL register\n", __func__);
goto abort;
}
dbg("%s: SLOTCTRL offset %x slot_ctrl %x\n",
__func__, ctrl->cap_base + SLOTCTRL, slot_ctrl);
for (rc = 0; rc < DEVICE_COUNT_RESOURCE; rc++)
if (pci_resource_len(pdev, rc) > 0)
dbg("pci resource[%d] start=0x%llx(len=0x%llx)\n", rc,
(unsigned long long)pci_resource_start(pdev, rc),
(unsigned long long)pci_resource_len(pdev, rc));
info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n",
pdev->vendor, pdev->device,
pdev->subsystem_vendor, pdev->subsystem_device);
ctrl->slot_cap = slot_cap;
ctrl->first_slot = slot_cap >> 19;
ctrl->slot_device_offset = 0;
ctrl->num_slots = 1;
ctrl->hpc_ops = &pciehp_hpc_ops;
mutex_init(&ctrl->crit_sect);
mutex_init(&ctrl->ctrl_lock);
/* setup wait queue */
init_waitqueue_head(&ctrl->queue);
dbg_ctrl(ctrl);
/* return PCI Controller Info */
ctrl->slot_device_offset = 0;
ctrl->num_slots = 1;
ctrl->first_slot = slot_cap >> 19;
ctrl->slot_cap = slot_cap;
info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n",
pdev->vendor, pdev->device,
pdev->subsystem_vendor, pdev->subsystem_device);
rc = pcie_init_hardware_part1(ctrl, dev);
if (rc)
if (pcie_init_hardware_part1(ctrl, dev))
goto abort;
if (pciehp_poll_mode) {
/* Install interrupt polling timer. Start with 10 sec delay */
init_timer(&ctrl->poll_timer);
start_int_poll_timer(ctrl, 10);
} else {
/* Installs the interrupt handler */
rc = request_irq(ctrl->pci_dev->irq, pcie_isr, IRQF_SHARED,
MY_NAME, (void *)ctrl);
dbg("%s: request_irq %d for hpc%d (returns %d)\n",
__func__, ctrl->pci_dev->irq,
atomic_read(&pciehp_num_controllers), rc);
if (rc) {
err("Can't get irq %d for the hotplug controller\n",
ctrl->pci_dev->irq);
goto abort;
}
}
dbg("pciehp ctrl b:d:f:irq=0x%x:%x:%x:%x\n", pdev->bus->number,
PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), dev->irq);
if (pciehp_request_irq(ctrl))
goto abort;
/*
* If this is the first controller to be initialized,
......@@ -1180,21 +1162,17 @@ int pcie_init(struct controller *ctrl, struct pcie_device *dev)
if (atomic_add_return(1, &pciehp_num_controllers) == 1) {
pciehp_wq = create_singlethread_workqueue("pciehpd");
if (!pciehp_wq) {
rc = -ENOMEM;
goto abort_free_irq;
}
}
rc = pcie_init_hardware_part2(ctrl, dev);
if (rc == 0) {
ctrl->hpc_ops = &pciehp_hpc_ops;
return 0;
}
if (pcie_init_hardware_part2(ctrl, dev))
goto abort_free_irq;
return 0;
abort_free_irq:
if (pciehp_poll_mode)
del_timer_sync(&ctrl->poll_timer);
else
free_irq(ctrl->pci_dev->irq, ctrl);
pciehp_free_irq(ctrl);
abort:
return -1;
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册