OMAP4: PRCM: add OMAP4-specific accessor/mutator functions

In some ways, the OMAP4 PRCM register layout is quite different than
the OMAP2/3 PRCM register layout.  For example, on OMAP2/3, from a
register layout point of view, all CM instances were located in the CM
subsystem, and all PRM instances were located in the PRM subsystem.
OMAP4 changes this.  Now, for example, some CM instances, such as
WKUP_CM and EMU_CM, are located in the system PRM subsystem.  And a
"local PRCM" exists for the MPU - this PRCM combines registers that
would normally appear in both CM and PRM instances, but uses its own
register layout which matches neither the OMAP2/3 PRCM layout nor the
OMAP4 PRCM layout.

To try to deal with this, introduce some new functions, omap4_cminst*
and omap4_prminst*.  The former is to be used when writing to a CM
instance register (no matter what subsystem or hardware module it
exists in), and the latter, similarly, with PRM instance registers.
To determine which "PRCM partition" to write to, the functions take a
PRCM instance ID argument.  Subsequent patches add these partition IDs
to the OMAP4 powerdomain and clockdomain definitions.

As far as I can see, there's really no good way to handle these types
of register access inconsistencies.  This patch seemed like the least
bad approach.

Moving forward, the long-term goal is to remove all direct PRCM
register access from the PM code.  PRCM register access should go
through layers such as the powerdomain and clockdomain code that can
hide the details of how to interact with the specific hardware
variant.

While here, rename cm4xxx.c to cm44xx.c to match the naming convention
of the other OMAP4 PRCM files.

Thanks to Santosh Shilimkar <santosh.shilimkar@ti.com>, Rajendra Nayak
<rnayak@ti.com>, and Benoît Cousson <b-cousson@ti.com> for some comments.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>

arch/arm/mach-omap2/Makefile

@@ -77,7 +77,9 @@ obj-$(CONFIG_ARCH_OMAP3)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
 # XXX The presence of cm2xxx_3xxx.o on the line below is temporary and
 # will be removed once the OMAP4 part of the codebase is converted to
 # use OMAP4-specific PRCM functions.
-obj-$(CONFIG_ARCH_OMAP4)		+= prcm.o cm2xxx_3xxx.o cm4xxx.o
+obj-$(CONFIG_ARCH_OMAP4)		+= prcm.o cm2xxx_3xxx.o cminst44xx.o \
+					   cm44xx.o prcm_mpu44xx.o \
+					   prminst44xx.o
 
 # OMAP powerdomain framework
 powerdomain-common			+= powerdomain.o powerdomain-common.o

arch/arm/mach-omap2/cm1_44xx.h

@@ -248,4 +248,9 @@
 #define OMAP4_CM_DYN_DEP_PRESCAL_RESTORE_OFFSET		0x0040
 #define OMAP4430_CM_DYN_DEP_PRESCAL_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0040)
 
+/* Function prototypes */
+extern u32 omap4_cm1_read_inst_reg(s16 inst, u16 idx);
+extern void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 idx);
+extern u32 omap4_cm1_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
+
 #endif

arch/arm/mach-omap2/cm2_44xx.h

@@ -480,4 +480,10 @@
 #define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0058)
 #define OMAP4_CM_SDMA_STATICDEP_RESTORE_OFFSET		0x005c
 #define OMAP4430_CM_SDMA_STATICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x005c)
+
+/* Function prototypes */
+extern u32 omap4_cm2_read_inst_reg(s16 inst, u16 idx);
+extern void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 idx);
+extern u32 omap4_cm2_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
+
 #endif

arch/arm/mach-omap2/cm44xx.c

+/*
+ * OMAP4 CM1, CM2 module low-level functions
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * These functions are intended to be used only by the cminst44xx.c file.
+ * XXX Perhaps we should just move them there and make them static.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <plat/common.h>
+
+#include "cm.h"
+#include "cm1_44xx.h"
+#include "cm2_44xx.h"
+#include "cm-regbits-44xx.h"
+
+/* CM1 hardware module low-level functions */
+
+/* Read a register in CM1 */
+u32 omap4_cm1_read_inst_reg(s16 inst, u16 reg)
+{
+	return __raw_readl(OMAP44XX_CM1_REGADDR(inst, reg));
+}
+
+/* Write into a register in CM1 */
+void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 reg)
+{
+	__raw_writel(val, OMAP44XX_CM1_REGADDR(inst, reg));
+}
+
+/* Read a register in CM2 */
+u32 omap4_cm2_read_inst_reg(s16 inst, u16 reg)
+{
+	return __raw_readl(OMAP44XX_CM2_REGADDR(inst, reg));
+}
+
+/* Write into a register in CM2 */
+void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 reg)
+{
+	__raw_writel(val, OMAP44XX_CM2_REGADDR(inst, reg));
+}

arch/arm/mach-omap2/cm4xxx.c → arch/arm/mach-omap2/cminst44xx.c

 /*
- * OMAP4 CM module functions
+ * OMAP4 CM instance functions
  *
  * Copyright (C) 2009 Nokia Corporation
  * Paul Walmsley
@@ -7,24 +7,71 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
+ *
+ * This is needed since CM instances can be in the PRM, PRCM_MPU, CM1,
+ * or CM2 hardware modules.  For example, the EMU_CM CM instance is in
+ * the PRM hardware module.  What a mess...
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <asm/atomic.h>
-
 #include <plat/common.h>
 
+#include "cm.h"
+#include "cm1_44xx.h"
+#include "cm2_44xx.h"
 #include "cm44xx.h"
+#include "cminst44xx.h"
 #include "cm-regbits-44xx.h"
+#include "prcm44xx.h"
+#include "prm44xx.h"
+#include "prcm_mpu44xx.h"
+
+static u32 _cm_bases[OMAP4_MAX_PRCM_PARTITIONS] = {
+	[OMAP4430_INVALID_PRCM_PARTITION]	= 0,
+	[OMAP4430_PRM_PARTITION]		= OMAP4430_PRM_BASE,
+	[OMAP4430_CM1_PARTITION]		= OMAP4430_CM1_BASE,
+	[OMAP4430_CM2_PARTITION]		= OMAP4430_CM2_BASE,
+	[OMAP4430_SCRM_PARTITION]		= 0,
+	[OMAP4430_PRCM_MPU_PARTITION]		= OMAP4430_PRCM_MPU_BASE,
+};
+
+/* Read a register in a CM instance */
+u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx)
+{
+	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
+	       part == OMAP4430_INVALID_PRCM_PARTITION ||
+	       !_cm_bases[part]);
+	return __raw_readl(OMAP2_L4_IO_ADDRESS(_cm_bases[part] + inst + idx));
+}
+
+/* Write into a register in a CM instance */
+void omap4_cminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx)
+{
+	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
+	       part == OMAP4430_INVALID_PRCM_PARTITION ||
+	       !_cm_bases[part]);
+	__raw_writel(val, OMAP2_L4_IO_ADDRESS(_cm_bases[part] + inst + idx));
+}
+
+/* Read-modify-write a register in CM1. Caller must lock */
+u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst,
+				   s16 idx)
+{
+	u32 v;
+
+	v = omap4_cminst_read_inst_reg(part, inst, idx);
+	v &= ~mask;
+	v |= bits;
+	omap4_cminst_write_inst_reg(v, part, inst, idx);
+
+	return v;
+}
+
 
 /**
  * omap4_cm_wait_module_ready - wait for a module to be in 'func' state

arch/arm/mach-omap2/cminst44xx.h

+/*
+ * OMAP4 Clock Management (CM) function prototypes
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ARCH_ASM_MACH_OMAP2_CMINST44XX_H
+#define __ARCH_ASM_MACH_OMAP2_CMINST44XX_H
+
+/*
+ * In an ideal world, we would not export these low-level functions,
+ * but this will probably take some time to fix properly
+ */
+extern u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx);
+extern void omap4_cminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx);
+extern u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part,
+					   s16 inst, s16 idx);
+
+extern int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg);
+
+#endif

arch/arm/mach-omap2/prcm.c

@@ -33,6 +33,7 @@
 #include "cm44xx.h"
 #include "prm2xxx_3xxx.h"
 #include "prm44xx.h"
+#include "prcm44xx.h"
 #include "prm-regbits-24xx.h"
 #include "prm-regbits-44xx.h"
 #include "control.h"
@@ -80,31 +81,6 @@ void omap_prcm_arch_reset(char mode, const char *cmd)
 				     prcm_offs, OMAP4_RM_RSTCTRL);
 }
 
-/* Read a PRM register, AND it, and shift the result down to bit 0 */
-u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask)
-{
-	u32 v;
-
-	v = __raw_readl(reg);
-	v &= mask;
-	v >>= __ffs(mask);
-
-	return v;
-}
-
-/* Read-modify-write a register in a PRM module. Caller must lock */
-u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg)
-{
-	u32 v;
-
-	v = __raw_readl(reg);
-	v &= ~mask;
-	v |= bits;
-	__raw_writel(v, reg);
-
-	return v;
-}
-
 /**
  * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness
  * @reg: physical address of module IDLEST register

arch/arm/mach-omap2/prcm44xx.h

+/*
+ * OMAP4 PRCM definitions
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains macros and functions that are common to all of
+ * the PRM/CM/PRCM blocks on the OMAP4 devices: PRM, CM1, CM2,
+ * PRCM_MPU, SCRM
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_PRCM44XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRCM44XX_H
+
+/*
+ * OMAP4 PRCM partition IDs
+ *
+ * The numbers and order are arbitrary, but 0 is reserved for the
+ * 'invalid' partition in case someone forgets to add a
+ * .prcm_partition field.
+ */
+#define OMAP4430_INVALID_PRCM_PARTITION		0
+#define OMAP4430_PRM_PARTITION			1
+#define OMAP4430_CM1_PARTITION			2
+#define OMAP4430_CM2_PARTITION			3
+#define OMAP4430_SCRM_PARTITION			4
+#define OMAP4430_PRCM_MPU_PARTITION		5
+
+/*
+ * OMAP4_MAX_PRCM_PARTITIONS: set to the highest value of the PRCM partition
+ * IDs, plus one
+ */
+#define OMAP4_MAX_PRCM_PARTITIONS		6
+
+
+#endif

arch/arm/mach-omap2/prcm_mpu44xx.c

+/*
+ * OMAP4 PRCM_MPU module functions
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <plat/common.h>
+
+#include "prcm_mpu44xx.h"
+#include "cm-regbits-44xx.h"
+
+/* PRCM_MPU low-level functions */
+
+u32 omap4_prcm_mpu_read_inst_reg(s16 inst, u16 reg)
+{
+	return __raw_readl(OMAP44XX_PRCM_MPU_REGADDR(inst, reg));
+}
+
+void omap4_prcm_mpu_write_inst_reg(u32 val, s16 inst, u16 reg)
+{
+	__raw_writel(val, OMAP44XX_PRCM_MPU_REGADDR(inst, reg));
+}
+
+u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg)
+{
+	u32 v;
+
+	v = omap4_prcm_mpu_read_inst_reg(inst, reg);
+	v &= ~mask;
+	v |= bits;
+	omap4_prcm_mpu_write_inst_reg(v, inst, reg);
+
+	return v;
+}

arch/arm/mach-omap2/prcm_mpu44xx.h

@@ -88,4 +88,12 @@
 #define OMAP4_CM_CPU1_CLKSTCTRL_OFFSET			0x0018
 #define OMAP4430_CM_CPU1_CLKSTCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x0018)
 
+/* Function prototypes */
+# ifndef __ASSEMBLER__
+extern u32 omap4_prcm_mpu_read_inst_reg(s16 inst, u16 idx);
+extern void omap4_prcm_mpu_write_inst_reg(u32 val, s16 inst, u16 idx);
+extern u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst,
+					    s16 idx);
+# endif
+
 #endif

arch/arm/mach-omap2/prm44xx.c

@@ -15,6 +15,7 @@
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/err.h>
+#include <linux/io.h>
 
 #include <plat/common.h>
 #include <plat/cpu.h>
@@ -29,6 +30,70 @@
  */
 #define OMAP4_RST_CTRL_ST_OFFSET		4
 
+/* PRM low-level functions */
+
+/* Read a register in a CM/PRM instance in the PRM module */
+u32 omap4_prm_read_inst_reg(s16 inst, u16 reg)
+{
+	return __raw_readl(OMAP44XX_PRM_REGADDR(inst, reg));
+}
+
+/* Write into a register in a CM/PRM instance in the PRM module */
+void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 reg)
+{
+	__raw_writel(val, OMAP44XX_PRM_REGADDR(inst, reg));
+}
+
+/* Read-modify-write a register in a PRM module. Caller must lock */
+u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg)
+{
+	u32 v;
+
+	v = omap4_prm_read_inst_reg(inst, reg);
+	v &= ~mask;
+	v |= bits;
+	omap4_prm_write_inst_reg(v, inst, reg);
+
+	return v;
+}
+
+/* Read a PRM register, AND it, and shift the result down to bit 0 */
+/* XXX deprecated */
+u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask)
+{
+	u32 v;
+
+	v = __raw_readl(reg);
+	v &= mask;
+	v >>= __ffs(mask);
+
+	return v;
+}
+
+/* Read-modify-write a register in a PRM module. Caller must lock */
+/* XXX deprecated */
+u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg)
+{
+	u32 v;
+
+	v = __raw_readl(reg);
+	v &= ~mask;
+	v |= bits;
+	__raw_writel(v, reg);
+
+	return v;
+}
+
+u32 omap4_prm_set_inst_reg_bits(u32 bits, s16 inst, s16 reg)
+{
+	return omap4_prm_rmw_inst_reg_bits(bits, bits, inst, reg);
+}
+
+u32 omap4_prm_clear_inst_reg_bits(u32 bits, s16 inst, s16 reg)
+{
+	return omap4_prm_rmw_inst_reg_bits(bits, 0x0, inst, reg);
+}
+
 /**
  * omap4_prm_is_hardreset_asserted - read the HW reset line state of
  * submodules contained in the hwmod module

arch/arm/mach-omap2/prm44xx.h

@@ -744,6 +744,12 @@
 /* Function prototypes */
 # ifndef __ASSEMBLER__
 
+extern u32 omap4_prm_read_inst_reg(s16 inst, u16 idx);
+extern void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 idx);
+extern u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
+extern u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg);
+extern u32 omap4_prm_set_inst_reg_bits(u32 bits, s16 inst, s16 idx);
+extern u32 omap4_prm_clear_inst_reg_bits(u32 bits, s16 inst, s16 idx);
 extern u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask);
 
 extern int omap4_prm_is_hardreset_asserted(void __iomem *rstctrl_reg, u8 shift);

arch/arm/mach-omap2/prminst44xx.c

+/*
+ * OMAP4 PRM instance functions
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <plat/common.h>
+
+#include "prm44xx.h"
+#include "prminst44xx.h"
+#include "prm-regbits-44xx.h"
+#include "prcm44xx.h"
+#include "prcm_mpu44xx.h"
+
+static u32 _prm_bases[OMAP4_MAX_PRCM_PARTITIONS] = {
+	[OMAP4430_INVALID_PRCM_PARTITION]	= 0,
+	[OMAP4430_PRM_PARTITION]		= OMAP4430_PRM_BASE,
+	[OMAP4430_CM1_PARTITION]		= 0,
+	[OMAP4430_CM2_PARTITION]		= 0,
+	[OMAP4430_SCRM_PARTITION]		= 0,
+	[OMAP4430_PRCM_MPU_PARTITION]		= OMAP4430_PRCM_MPU_BASE,
+};
+
+/* Read a register in a PRM instance */
+u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx)
+{
+	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
+	       part == OMAP4430_INVALID_PRCM_PARTITION ||
+	       !_prm_bases[part]);
+	return __raw_readl(OMAP2_L4_IO_ADDRESS(_prm_bases[part] + inst +
+					       idx));
+}
+
+/* Write into a register in a PRM instance */
+void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx)
+{
+	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
+	       part == OMAP4430_INVALID_PRCM_PARTITION ||
+	       !_prm_bases[part]);
+	__raw_writel(val, OMAP2_L4_IO_ADDRESS(_prm_bases[part] + inst + idx));
+}
+
+/* Read-modify-write a register in PRM. Caller must lock */
+u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst,
+				   s16 idx)
+{
+	u32 v;
+
+	v = omap4_prminst_read_inst_reg(part, inst, idx);
+	v &= ~mask;
+	v |= bits;
+	omap4_prminst_write_inst_reg(v, part, inst, idx);
+
+	return v;
+}

arch/arm/mach-omap2/prminst44xx.h

+/*
+ * OMAP4 Power/Reset Management (PRM) function prototypes
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ARCH_ASM_MACH_OMAP2_PRMINST44XX_H
+#define __ARCH_ASM_MACH_OMAP2_PRMINST44XX_H
+
+/*
+ * In an ideal world, we would not export these low-level functions,
+ * but this will probably take some time to fix properly
+ */
+extern u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx);
+extern void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx);
+extern u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part,
+					   s16 inst, s16 idx);
+
+extern void omap4_prm_global_warm_sw_reset(void);
+
+#endif

arch/arm/plat-omap/include/plat/prcm.h

@@ -18,6 +18,10 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * XXX This file is deprecated.  The PRCM is an OMAP2+-only subsystem,
+ * so this file doesn't belong in plat-omap/include/plat.  Please
+ * do not add anything new to this file.
  */
 
 #ifndef __ASM_ARM_ARCH_OMAP_PRCM_H
@@ -31,9 +35,6 @@ int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
 #define START_PADCONF_SAVE 0x2
 #define PADCONF_SAVE_DONE  0x1
 
-u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask);
-u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg);
-
 #endif