提交 2a90a69f 编写于 作者: D Daiane Angolini 提交者: Sascha Hauer

ARM: mach-mx5/mx53_ard: Add gpio_keys support

Signed-off-by: NDaiane Angolini <daiane.angolini@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
上级 d23cb578
......@@ -216,6 +216,7 @@ config MACH_MX53_ARD
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select IMX_HAVE_PLATFORM_GPIO_KEYS
help
Include support for MX53 ARD platform. This includes specific
configurations for the board and its peripherals.
......
......@@ -39,6 +39,11 @@
#define ARD_SD1_CD IMX_GPIO_NR(1, 1)
#define ARD_SD1_WP IMX_GPIO_NR(1, 9)
#define ARD_I2CPORTEXP_B IMX_GPIO_NR(2, 3)
#define ARD_VOLUMEDOWN IMX_GPIO_NR(4, 0)
#define ARD_HOME IMX_GPIO_NR(5, 10)
#define ARD_BACK IMX_GPIO_NR(5, 11)
#define ARD_PROG IMX_GPIO_NR(5, 12)
#define ARD_VOLUMEUP IMX_GPIO_NR(5, 13)
static iomux_v3_cfg_t mx53_ard_pads[] = {
/* UART1 */
......@@ -91,6 +96,35 @@ static iomux_v3_cfg_t mx53_ard_pads[] = {
/* I2C3 */
MX53_PAD_GPIO_3__I2C3_SCL,
MX53_PAD_GPIO_16__I2C3_SDA,
/* GPIO */
MX53_PAD_DISP0_DAT16__GPIO5_10, /* home */
MX53_PAD_DISP0_DAT17__GPIO5_11, /* back */
MX53_PAD_DISP0_DAT18__GPIO5_12, /* prog */
MX53_PAD_DISP0_DAT19__GPIO5_13, /* vol up */
MX53_PAD_GPIO_10__GPIO4_0, /* vol down */
};
#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \
{ \
.gpio = gpio_num, \
.type = EV_KEY, \
.code = ev_code, \
.active_low = act_low, \
.desc = "btn " descr, \
.wakeup = wake, \
}
static struct gpio_keys_button ard_buttons[] = {
GPIO_BUTTON(ARD_HOME, KEY_HOME, 1, "home", 0),
GPIO_BUTTON(ARD_BACK, KEY_BACK, 1, "back", 0),
GPIO_BUTTON(ARD_PROG, KEY_PROGRAM, 1, "program", 0),
GPIO_BUTTON(ARD_VOLUMEUP, KEY_VOLUMEUP, 1, "volume-up", 0),
GPIO_BUTTON(ARD_VOLUMEDOWN, KEY_VOLUMEDOWN, 1, "volume-down", 0),
};
static const struct gpio_keys_platform_data ard_button_data __initconst = {
.buttons = ard_buttons,
.nbuttons = ARRAY_SIZE(ard_buttons),
};
static struct resource ard_smsc911x_resources[] = {
......@@ -199,6 +233,7 @@ static void __init mx53_ard_board_init(void)
imx53_add_imx2_wdt(0, NULL);
imx53_add_imx_i2c(1, &mx53_ard_i2c2_data);
imx53_add_imx_i2c(2, &mx53_ard_i2c3_data);
imx_add_gpio_keys(&ard_button_data);
}
static void __init mx53_ard_timer_init(void)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册