提交 2a8b67fb 编写于 作者: L Linus Torvalds

Merge branch 'x86-idle-for-linus' of...

Merge branch 'x86-idle-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-idle-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, hotplug: In the MWAIT case of play_dead, CLFLUSH the cache line
  x86, hotplug: Move WBINVD back outside the play_dead loop
  x86, hotplug: Use mwait to offline a processor, fix the legacy case
  x86, mwait: Move mwait constants to a common header file
#ifndef _ASM_X86_MWAIT_H
#define _ASM_X86_MWAIT_H
#define MWAIT_SUBSTATE_MASK 0xf
#define MWAIT_CSTATE_MASK 0xf
#define MWAIT_SUBSTATE_SIZE 4
#define MWAIT_MAX_NUM_CSTATES 8
#define CPUID_MWAIT_LEAF 5
#define CPUID5_ECX_EXTENSIONS_SUPPORTED 0x1
#define CPUID5_ECX_INTERRUPT_BREAK 0x2
#define MWAIT_ECX_INTERRUPT_BREAK 0x1
#endif /* _ASM_X86_MWAIT_H */
......@@ -766,29 +766,6 @@ extern unsigned long idle_halt;
extern unsigned long idle_nomwait;
extern bool c1e_detected;
/*
* on systems with caches, caches must be flashed as the absolute
* last instruction before going into a suspended halt. Otherwise,
* dirty data can linger in the cache and become stale on resume,
* leading to strange errors.
*
* perform a variety of operations to guarantee that the compiler
* will not reorder instructions. wbinvd itself is serializing
* so the processor will not reorder.
*
* Systems without cache can just go into halt.
*/
static inline void wbinvd_halt(void)
{
mb();
/* check for clflush to determine if wbinvd is legal */
if (cpu_has_clflush)
asm volatile("cli; wbinvd; 1: hlt; jmp 1b" : : : "memory");
else
while (1)
halt();
}
extern void enable_sep_cpu(void);
extern int sysenter_setup(void);
......
......@@ -13,6 +13,7 @@
#include <acpi/processor.h>
#include <asm/acpi.h>
#include <asm/mwait.h>
/*
* Initialize bm_flags based on the CPU cache properties
......@@ -65,16 +66,6 @@ static struct cstate_entry __percpu *cpu_cstate_entry; /* per CPU ptr */
static short mwait_supported[ACPI_PROCESSOR_MAX_POWER];
#define MWAIT_SUBSTATE_MASK (0xf)
#define MWAIT_CSTATE_MASK (0xf)
#define MWAIT_SUBSTATE_SIZE (4)
#define CPUID_MWAIT_LEAF (5)
#define CPUID5_ECX_EXTENSIONS_SUPPORTED (0x1)
#define CPUID5_ECX_INTERRUPT_BREAK (0x2)
#define MWAIT_ECX_INTERRUPT_BREAK (0x1)
#define NATIVE_CSTATE_BEYOND_HALT (2)
static long acpi_processor_ffh_cstate_probe_cpu(void *_cx)
......
......@@ -62,6 +62,7 @@
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include <asm/mtrr.h>
#include <asm/mwait.h>
#include <asm/vmi.h>
#include <asm/apic.h>
#include <asm/setup.h>
......@@ -1395,11 +1396,88 @@ void play_dead_common(void)
local_irq_disable();
}
/*
* We need to flush the caches before going to sleep, lest we have
* dirty data in our caches when we come back up.
*/
static inline void mwait_play_dead(void)
{
unsigned int eax, ebx, ecx, edx;
unsigned int highest_cstate = 0;
unsigned int highest_subcstate = 0;
int i;
void *mwait_ptr;
if (!cpu_has(&current_cpu_data, X86_FEATURE_MWAIT))
return;
if (!cpu_has(&current_cpu_data, X86_FEATURE_CLFLSH))
return;
if (current_cpu_data.cpuid_level < CPUID_MWAIT_LEAF)
return;
eax = CPUID_MWAIT_LEAF;
ecx = 0;
native_cpuid(&eax, &ebx, &ecx, &edx);
/*
* eax will be 0 if EDX enumeration is not valid.
* Initialized below to cstate, sub_cstate value when EDX is valid.
*/
if (!(ecx & CPUID5_ECX_EXTENSIONS_SUPPORTED)) {
eax = 0;
} else {
edx >>= MWAIT_SUBSTATE_SIZE;
for (i = 0; i < 7 && edx; i++, edx >>= MWAIT_SUBSTATE_SIZE) {
if (edx & MWAIT_SUBSTATE_MASK) {
highest_cstate = i;
highest_subcstate = edx & MWAIT_SUBSTATE_MASK;
}
}
eax = (highest_cstate << MWAIT_SUBSTATE_SIZE) |
(highest_subcstate - 1);
}
/*
* This should be a memory location in a cache line which is
* unlikely to be touched by other processors. The actual
* content is immaterial as it is not actually modified in any way.
*/
mwait_ptr = &current_thread_info()->flags;
wbinvd();
while (1) {
/*
* The CLFLUSH is a workaround for erratum AAI65 for
* the Xeon 7400 series. It's not clear it is actually
* needed, but it should be harmless in either case.
* The WBINVD is insufficient due to the spurious-wakeup
* case where we return around the loop.
*/
clflush(mwait_ptr);
__monitor(mwait_ptr, 0, 0);
mb();
__mwait(eax, 0);
}
}
static inline void hlt_play_dead(void)
{
if (current_cpu_data.x86 >= 4)
wbinvd();
while (1) {
native_halt();
}
}
void native_play_dead(void)
{
play_dead_common();
tboot_shutdown(TB_SHUTDOWN_WFS);
wbinvd_halt();
mwait_play_dead(); /* Only returns on failure */
hlt_play_dead();
}
#else /* ... !CONFIG_HOTPLUG_CPU */
......
......@@ -30,18 +30,13 @@
#include <linux/slab.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
#include <asm/mwait.h>
#define ACPI_PROCESSOR_AGGREGATOR_CLASS "acpi_pad"
#define ACPI_PROCESSOR_AGGREGATOR_DEVICE_NAME "Processor Aggregator"
#define ACPI_PROCESSOR_AGGREGATOR_NOTIFY 0x80
static DEFINE_MUTEX(isolated_cpus_lock);
#define MWAIT_SUBSTATE_MASK (0xf)
#define MWAIT_CSTATE_MASK (0xf)
#define MWAIT_SUBSTATE_SIZE (4)
#define CPUID_MWAIT_LEAF (5)
#define CPUID5_ECX_EXTENSIONS_SUPPORTED (0x1)
#define CPUID5_ECX_INTERRUPT_BREAK (0x2)
static unsigned long power_saving_mwait_eax;
static unsigned char tsc_detected_unstable;
......
......@@ -59,18 +59,11 @@
#include <linux/hrtimer.h> /* ktime_get_real() */
#include <trace/events/power.h>
#include <linux/sched.h>
#include <asm/mwait.h>
#define INTEL_IDLE_VERSION "0.4"
#define PREFIX "intel_idle: "
#define MWAIT_SUBSTATE_MASK (0xf)
#define MWAIT_CSTATE_MASK (0xf)
#define MWAIT_SUBSTATE_SIZE (4)
#define MWAIT_MAX_NUM_CSTATES 8
#define CPUID_MWAIT_LEAF (5)
#define CPUID5_ECX_EXTENSIONS_SUPPORTED (0x1)
#define CPUID5_ECX_INTERRUPT_BREAK (0x2)
static struct cpuidle_driver intel_idle_driver = {
.name = "intel_idle",
.owner = THIS_MODULE,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册