提交 2a803c88 编写于 作者: T Tomi Valkeinen

OMAPDSS: Remove video SRAM support

OMAP SRAM can be used as video memory on OMAP1 and 2. However, there
usually is very little SRAM available, thus limiting its use, and no
board supported by the kernel currently uses it.

This patch removes the use of SRAM as video ram for the omapdss driver
to simplify memory handling.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
上级 8dc50ec7
......@@ -23,40 +23,21 @@
#include <linux/types.h>
#define OMAP_VRAM_MEMTYPE_SDRAM 0
#define OMAP_VRAM_MEMTYPE_SRAM 1
#define OMAP_VRAM_MEMTYPE_MAX 1
extern int omap_vram_add_region(unsigned long paddr, size_t size);
extern int omap_vram_free(unsigned long paddr, size_t size);
extern int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr);
extern int omap_vram_alloc(size_t size, unsigned long *paddr);
extern int omap_vram_reserve(unsigned long paddr, size_t size);
extern void omap_vram_get_info(unsigned long *vram, unsigned long *free_vram,
unsigned long *largest_free_block);
#ifdef CONFIG_OMAP2_VRAM
extern void omap_vram_set_sdram_vram(u32 size, u32 start);
extern void omap_vram_set_sram_vram(u32 size, u32 start);
extern void omap_vram_reserve_sdram_memblock(void);
extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
unsigned long sram_vstart,
unsigned long sram_size,
unsigned long pstart_avail,
unsigned long size_avail);
#else
static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { }
static inline void omap_vram_set_sram_vram(u32 size, u32 start) { }
static inline void omap_vram_reserve_sdram_memblock(void) { }
static inline unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
unsigned long sram_vstart,
unsigned long sram_size,
unsigned long pstart_avail,
unsigned long size_avail)
{
return 0;
}
#endif
#endif
......@@ -37,7 +37,6 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <plat/sram.h>
#include <plat/clock.h>
#include <video/omapdss.h>
......
......@@ -215,7 +215,7 @@ static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
int r = 0, i;
size_t size;
if (mi->type > OMAPFB_MEMTYPE_MAX)
if (mi->type != OMAPFB_MEMTYPE_SDRAM)
return -EINVAL;
size = PAGE_ALIGN(mi->size);
......
......@@ -1399,7 +1399,7 @@ static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size,
if (!paddr) {
DBG("allocating %lu bytes for fb %d\n", size, ofbi->id);
r = omap_vram_alloc(OMAP_VRAM_MEMTYPE_SDRAM, size, &paddr);
r = omap_vram_alloc(size, &paddr);
} else {
DBG("reserving %lu bytes at %lx for fb %d\n", size, paddr,
ofbi->id);
......@@ -1669,7 +1669,7 @@ int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type)
int old_type = rg->type;
int r;
if (type > OMAPFB_MEMTYPE_MAX)
if (type != OMAPFB_MEMTYPE_SDRAM)
return -EINVAL;
size = PAGE_ALIGN(size);
......
......@@ -33,7 +33,6 @@
#include <asm/setup.h>
#include <plat/sram.h>
#include <plat/vram.h>
#include <plat/dma.h>
......@@ -43,10 +42,6 @@
#define DBG(format, ...)
#endif
#define OMAP2_SRAM_START 0x40200000
/* Maximum size, in reality this is smaller if SRAM is partially locked. */
#define OMAP2_SRAM_SIZE 0xa0000 /* 640k */
/* postponed regions are used to temporarily store region information at boot
* time when we cannot yet allocate the region list */
#define MAX_POSTPONED_REGIONS 10
......@@ -74,15 +69,6 @@ struct vram_region {
static DEFINE_MUTEX(region_mutex);
static LIST_HEAD(region_list);
static inline int region_mem_type(unsigned long paddr)
{
if (paddr >= OMAP2_SRAM_START &&
paddr < OMAP2_SRAM_START + OMAP2_SRAM_SIZE)
return OMAP_VRAM_MEMTYPE_SRAM;
else
return OMAP_VRAM_MEMTYPE_SDRAM;
}
static struct vram_region *omap_vram_create_region(unsigned long paddr,
unsigned pages)
{
......@@ -212,9 +198,6 @@ static int _omap_vram_reserve(unsigned long paddr, unsigned pages)
DBG("checking region %lx %d\n", rm->paddr, rm->pages);
if (region_mem_type(rm->paddr) != region_mem_type(paddr))
continue;
start = rm->paddr;
end = start + (rm->pages << PAGE_SHIFT) - 1;
if (start > paddr || end < paddr + size - 1)
......@@ -320,7 +303,7 @@ static int _omap_vram_clear(u32 paddr, unsigned pages)
return r;
}
static int _omap_vram_alloc(int mtype, unsigned pages, unsigned long *paddr)
static int _omap_vram_alloc(unsigned pages, unsigned long *paddr)
{
struct vram_region *rm;
struct vram_alloc *alloc;
......@@ -330,9 +313,6 @@ static int _omap_vram_alloc(int mtype, unsigned pages, unsigned long *paddr)
DBG("checking region %lx %d\n", rm->paddr, rm->pages);
if (region_mem_type(rm->paddr) != mtype)
continue;
start = rm->paddr;
list_for_each_entry(alloc, &rm->alloc_list, list) {
......@@ -365,21 +345,21 @@ static int _omap_vram_alloc(int mtype, unsigned pages, unsigned long *paddr)
return -ENOMEM;
}
int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr)
int omap_vram_alloc(size_t size, unsigned long *paddr)
{
unsigned pages;
int r;
BUG_ON(mtype > OMAP_VRAM_MEMTYPE_MAX || !size);
BUG_ON(!size);
DBG("alloc mem type %d size %d\n", mtype, size);
DBG("alloc mem size %d\n", size);
size = PAGE_ALIGN(size);
pages = size >> PAGE_SHIFT;
mutex_lock(&region_mutex);
r = _omap_vram_alloc(mtype, pages, paddr);
r = _omap_vram_alloc(pages, paddr);
mutex_unlock(&region_mutex);
......@@ -500,10 +480,6 @@ arch_initcall(omap_vram_init);
/* boottime vram alloc stuff */
/* set from board file */
static u32 omap_vram_sram_start __initdata;
static u32 omap_vram_sram_size __initdata;
/* set from board file */
static u32 omap_vram_sdram_start __initdata;
static u32 omap_vram_sdram_size __initdata;
......@@ -587,73 +563,8 @@ void __init omap_vram_reserve_sdram_memblock(void)
pr_info("Reserving %u bytes SDRAM for VRAM\n", size);
}
/*
* Called at sram init time, before anything is pushed to the SRAM stack.
* Because of the stack scheme, we will allocate everything from the
* start of the lowest address region to the end of SRAM. This will also
* include padding for page alignment and possible holes between regions.
*
* As opposed to the SDRAM case, we'll also do any dynamic allocations at
* this point, since the driver built as a module would have problem with
* freeing / reallocating the regions.
*/
unsigned long __init omap_vram_reserve_sram(unsigned long sram_pstart,
unsigned long sram_vstart,
unsigned long sram_size,
unsigned long pstart_avail,
unsigned long size_avail)
{
unsigned long pend_avail;
unsigned long reserved;
u32 paddr;
u32 size;
paddr = omap_vram_sram_start;
size = omap_vram_sram_size;
if (!size)
return 0;
reserved = 0;
pend_avail = pstart_avail + size_avail;
if (!paddr) {
/* Dynamic allocation */
if ((size_avail & PAGE_MASK) < size) {
pr_err("Not enough SRAM for VRAM\n");
return 0;
}
size_avail = (size_avail - size) & PAGE_MASK;
paddr = pstart_avail + size_avail;
}
if (paddr < sram_pstart ||
paddr + size > sram_pstart + sram_size) {
pr_err("Illegal SRAM region for VRAM\n");
return 0;
}
/* Reserve everything above the start of the region. */
if (pend_avail - paddr > reserved)
reserved = pend_avail - paddr;
size_avail = pend_avail - reserved - pstart_avail;
omap_vram_add_region(paddr, size);
if (reserved)
pr_info("Reserving %lu bytes SRAM for VRAM\n", reserved);
return reserved;
}
void __init omap_vram_set_sdram_vram(u32 size, u32 start)
{
omap_vram_sdram_start = start;
omap_vram_sdram_size = size;
}
void __init omap_vram_set_sram_vram(u32 size, u32 start)
{
omap_vram_sram_start = start;
omap_vram_sram_size = size;
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册