提交 2a346996 编写于 作者: S Samu Onkalo 提交者: Guenter Roeck

hwmon: lis3: pm_runtime support

Add pm_runtime support to lis3 core driver.
Add pm_runtime support to lis3 i2c driver.

spi and hp_accel drivers are not yet supported. Old always
on functionality remains for those.

For sysfs there is 5 second delay before turning off the
chip to avoid long ramp up delay.
Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Acked-by: NEric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
上级 0ab83a7c
......@@ -34,6 +34,7 @@
#include <linux/freezer.h>
#include <linux/uaccess.h>
#include <linux/miscdevice.h>
#include <linux/pm_runtime.h>
#include <asm/atomic.h>
#include "lis3lv02d.h"
......@@ -43,6 +44,9 @@
#define MDPS_POLL_INTERVAL 50
#define MDPS_POLL_MIN 0
#define MDPS_POLL_MAX 2000
#define LIS3_SYSFS_POWERDOWN_DELAY 5000 /* In milliseconds */
/*
* The sensor can also generate interrupts (DRDY) but it's pretty pointless
* because they are generated even if the data do not change. So it's better
......@@ -296,6 +300,18 @@ static void lis3lv02d_joystick_poll(struct input_polled_dev *pidev)
mutex_unlock(&lis3_dev.mutex);
}
static void lis3lv02d_joystick_open(struct input_polled_dev *pidev)
{
if (lis3_dev.pm_dev)
pm_runtime_get_sync(lis3_dev.pm_dev);
}
static void lis3lv02d_joystick_close(struct input_polled_dev *pidev)
{
if (lis3_dev.pm_dev)
pm_runtime_put(lis3_dev.pm_dev);
}
static irqreturn_t lis302dl_interrupt(int irq, void *dummy)
{
if (!test_bit(0, &lis3_dev.misc_opened))
......@@ -390,6 +406,9 @@ static int lis3lv02d_misc_open(struct inode *inode, struct file *file)
if (test_and_set_bit(0, &lis3_dev.misc_opened))
return -EBUSY; /* already open */
if (lis3_dev.pm_dev)
pm_runtime_get_sync(lis3_dev.pm_dev);
atomic_set(&lis3_dev.count, 0);
return 0;
}
......@@ -398,6 +417,8 @@ static int lis3lv02d_misc_release(struct inode *inode, struct file *file)
{
fasync_helper(-1, file, 0, &lis3_dev.async_queue);
clear_bit(0, &lis3_dev.misc_opened); /* release the device */
if (lis3_dev.pm_dev)
pm_runtime_put(lis3_dev.pm_dev);
return 0;
}
......@@ -494,6 +515,8 @@ int lis3lv02d_joystick_enable(void)
return -ENOMEM;
lis3_dev.idev->poll = lis3lv02d_joystick_poll;
lis3_dev.idev->open = lis3lv02d_joystick_open;
lis3_dev.idev->close = lis3lv02d_joystick_close;
lis3_dev.idev->poll_interval = MDPS_POLL_INTERVAL;
lis3_dev.idev->poll_interval_min = MDPS_POLL_MIN;
lis3_dev.idev->poll_interval_max = MDPS_POLL_MAX;
......@@ -546,12 +569,30 @@ void lis3lv02d_joystick_disable(void)
EXPORT_SYMBOL_GPL(lis3lv02d_joystick_disable);
/* Sysfs stuff */
static void lis3lv02d_sysfs_poweron(struct lis3lv02d *lis3)
{
/*
* SYSFS functions are fast visitors so put-call
* immediately after the get-call. However, keep
* chip running for a while and schedule delayed
* suspend. This way periodic sysfs calls doesn't
* suffer from relatively long power up time.
*/
if (lis3->pm_dev) {
pm_runtime_get_sync(lis3->pm_dev);
pm_runtime_put_noidle(lis3->pm_dev);
pm_schedule_suspend(lis3->pm_dev, LIS3_SYSFS_POWERDOWN_DELAY);
}
}
static ssize_t lis3lv02d_selftest_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
int result;
s16 values[3];
lis3lv02d_sysfs_poweron(&lis3_dev);
result = lis3lv02d_selftest(&lis3_dev, values);
return sprintf(buf, "%s %d %d %d\n", result == 0 ? "OK" : "FAIL",
values[0], values[1], values[2]);
......@@ -562,6 +603,7 @@ static ssize_t lis3lv02d_position_show(struct device *dev,
{
int x, y, z;
lis3lv02d_sysfs_poweron(&lis3_dev);
mutex_lock(&lis3_dev.mutex);
lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z);
mutex_unlock(&lis3_dev.mutex);
......@@ -571,6 +613,7 @@ static ssize_t lis3lv02d_position_show(struct device *dev,
static ssize_t lis3lv02d_rate_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
lis3lv02d_sysfs_poweron(&lis3_dev);
return sprintf(buf, "%d\n", lis3lv02d_get_odr());
}
......@@ -583,6 +626,7 @@ static ssize_t lis3lv02d_rate_set(struct device *dev,
if (strict_strtoul(buf, 0, &rate))
return -EINVAL;
lis3lv02d_sysfs_poweron(&lis3_dev);
if (lis3lv02d_set_odr(rate))
return -EINVAL;
......@@ -619,6 +663,17 @@ int lis3lv02d_remove_fs(struct lis3lv02d *lis3)
{
sysfs_remove_group(&lis3->pdev->dev.kobj, &lis3lv02d_attribute_group);
platform_device_unregister(lis3->pdev);
if (lis3->pm_dev) {
/* Barrier after the sysfs remove */
pm_runtime_barrier(lis3->pm_dev);
/* SYSFS may have left chip running. Turn off if necessary */
if (!pm_runtime_suspended(lis3->pm_dev))
lis3lv02d_poweroff(&lis3_dev);
pm_runtime_disable(lis3->pm_dev);
pm_runtime_set_suspended(lis3->pm_dev);
}
return 0;
}
EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs);
......@@ -728,6 +783,11 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
lis3lv02d_add_fs(dev);
lis3lv02d_poweron(dev);
if (dev->pm_dev) {
pm_runtime_set_active(dev->pm_dev);
pm_runtime_enable(dev->pm_dev);
}
if (lis3lv02d_joystick_enable())
printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n");
......
......@@ -232,6 +232,7 @@ union axis_conversion {
struct lis3lv02d {
void *bus_priv; /* used by the bus layer only */
struct device *pm_dev; /* for pm_runtime purposes */
int (*init) (struct lis3lv02d *lis3);
int (*write) (struct lis3lv02d *lis3, int reg, u8 val);
int (*read) (struct lis3lv02d *lis3, int reg, u8 *ret);
......
......@@ -29,6 +29,7 @@
#include <linux/init.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/pm_runtime.h>
#include "lis3lv02d.h"
#define DRV_NAME "lis3lv02d_i2c"
......@@ -94,6 +95,7 @@ static int __devinit lis3lv02d_i2c_probe(struct i2c_client *client,
lis3_dev.write = lis3_i2c_write;
lis3_dev.irq = client->irq;
lis3_dev.ac = lis3lv02d_axis_map;
lis3_dev.pm_dev = &client->dev;
i2c_set_clientdata(client, &lis3_dev);
ret = lis3lv02d_init_device(&lis3_dev);
......@@ -103,21 +105,20 @@ static int __devinit lis3lv02d_i2c_probe(struct i2c_client *client,
static int __devexit lis3lv02d_i2c_remove(struct i2c_client *client)
{
struct lis3lv02d *lis3 = i2c_get_clientdata(client);
struct lis3lv02d_platform_data *pdata = client->dev.platform_data;
if (pdata && pdata->release_resources)
pdata->release_resources();
lis3lv02d_joystick_disable();
lis3lv02d_poweroff(lis3);
return lis3lv02d_remove_fs(&lis3_dev);
}
#ifdef CONFIG_PM
static int lis3lv02d_i2c_suspend(struct i2c_client *client, pm_message_t mesg)
static int lis3lv02d_i2c_suspend(struct device *dev)
{
struct i2c_client *client = container_of(dev, struct i2c_client, dev);
struct lis3lv02d *lis3 = i2c_get_clientdata(client);
if (!lis3->pdata || !lis3->pdata->wakeup_flags)
......@@ -125,18 +126,21 @@ static int lis3lv02d_i2c_suspend(struct i2c_client *client, pm_message_t mesg)
return 0;
}
static int lis3lv02d_i2c_resume(struct i2c_client *client)
static int lis3lv02d_i2c_resume(struct device *dev)
{
struct i2c_client *client = container_of(dev, struct i2c_client, dev);
struct lis3lv02d *lis3 = i2c_get_clientdata(client);
if (!lis3->pdata || !lis3->pdata->wakeup_flags)
/*
* pm_runtime documentation says that devices should always
* be powered on at resume. Pm_runtime turns them off after system
* wide resume is complete.
*/
if (!lis3->pdata || !lis3->pdata->wakeup_flags ||
pm_runtime_suspended(dev))
lis3lv02d_poweron(lis3);
return 0;
}
static void lis3lv02d_i2c_shutdown(struct i2c_client *client)
{
lis3lv02d_i2c_suspend(client, PMSG_SUSPEND);
return 0;
}
#else
#define lis3lv02d_i2c_suspend NULL
......@@ -144,6 +148,24 @@ static void lis3lv02d_i2c_shutdown(struct i2c_client *client)
#define lis3lv02d_i2c_shutdown NULL
#endif
static int lis3_i2c_runtime_suspend(struct device *dev)
{
struct i2c_client *client = container_of(dev, struct i2c_client, dev);
struct lis3lv02d *lis3 = i2c_get_clientdata(client);
lis3lv02d_poweroff(lis3);
return 0;
}
static int lis3_i2c_runtime_resume(struct device *dev)
{
struct i2c_client *client = container_of(dev, struct i2c_client, dev);
struct lis3lv02d *lis3 = i2c_get_clientdata(client);
lis3lv02d_poweron(lis3);
return 0;
}
static const struct i2c_device_id lis3lv02d_id[] = {
{"lis3lv02d", 0 },
{}
......@@ -151,14 +173,20 @@ static const struct i2c_device_id lis3lv02d_id[] = {
MODULE_DEVICE_TABLE(i2c, lis3lv02d_id);
static const struct dev_pm_ops lis3_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(lis3lv02d_i2c_suspend,
lis3lv02d_i2c_resume)
SET_RUNTIME_PM_OPS(lis3_i2c_runtime_suspend,
lis3_i2c_runtime_resume,
NULL)
};
static struct i2c_driver lis3lv02d_i2c_driver = {
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
.pm = &lis3_pm_ops,
},
.suspend = lis3lv02d_i2c_suspend,
.shutdown = lis3lv02d_i2c_shutdown,
.resume = lis3lv02d_i2c_resume,
.probe = lis3lv02d_i2c_probe,
.remove = __devexit_p(lis3lv02d_i2c_remove),
.id_table = lis3lv02d_id,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册