ARM: tegra: retain L2 content over CPU suspend/resume

The L2 RAM is in different power domain from the CPU cluster. So the
L2 content can be retained over CPU suspend/resume. To do that, we
need to disable L2 after the MMU is disabled, and enable L2 before
the MMU is enabled. But the L2 controller is in the same power domain
with the CPU cluster. We need to restore it's settings and re-enable
it after the power be resumed.
Signed-off-by: NJoseph Lo <josephl@nvidia.com>
Acked-by: NPeter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: NStephen Warren <swarren@nvidia.com>

arch/arm/mach-tegra/common.c

@@ -36,6 +36,7 @@
 #include "pmc.h"
 #include "apbio.h"
 #include "sleep.h"
+#include "pm.h"
 
 /*
  * Storage for debug-macro.S's state.
@@ -117,6 +118,7 @@ static __initdata struct tegra_clk_init_table tegra30_clk_init_table[] = {
 static void __init tegra_init_cache(void)
 {
 #ifdef CONFIG_CACHE_L2X0
+	int ret;
 	void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000;
 	u32 aux_ctrl, cache_type;
 
@@ -124,7 +126,9 @@ static void __init tegra_init_cache(void)
 	aux_ctrl = (cache_type & 0x700) << (17-8);
 	aux_ctrl |= 0x7C400001;
 
-	l2x0_of_init(aux_ctrl, 0x8200c3fe);
+	ret = l2x0_of_init(aux_ctrl, 0x8200c3fe);
+	if (!ret)
+		l2x0_saved_regs_addr = virt_to_phys(&l2x0_saved_regs);
 #endif
 
 }

arch/arm/mach-tegra/headsmp.S

@@ -2,6 +2,8 @@
 #include <linux/init.h>
 
 #include <asm/cache.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
 
 #include "flowctrl.h"
 #include "iomap.h"
@@ -113,10 +115,19 @@ ENTRY(tegra_resume)
 	str	r1, [r0]
 #endif
 
+	/* L2 cache resume & re-enable */
+	l2_cache_resume r0, r1, r2, l2x0_saved_regs_addr
+
 	b	cpu_resume
 ENDPROC(tegra_resume)
 #endif
 
+#ifdef CONFIG_CACHE_L2X0
+	.globl	l2x0_saved_regs_addr
+l2x0_saved_regs_addr:
+	.long	0
+#endif
+
 	.align L1_CACHE_SHIFT
 ENTRY(__tegra_cpu_reset_handler_start)
 

arch/arm/mach-tegra/pm.c

@@ -207,11 +207,9 @@ void tegra_idle_lp2_last(u32 cpu_on_time, u32 cpu_off_time)
 
 	cpu_cluster_pm_enter();
 	suspend_cpu_complex();
-	outer_disable();
 
 	cpu_suspend(PHYS_OFFSET - PAGE_OFFSET, &tegra_sleep_cpu);
 
-	outer_resume();
 	restore_cpu_complex();
 	cpu_cluster_pm_exit();
 }

arch/arm/mach-tegra/pm.h

@@ -21,6 +21,8 @@
 #ifndef _MACH_TEGRA_PM_H_
 #define _MACH_TEGRA_PM_H_
 
+extern unsigned long l2x0_saved_regs_addr;
+
 void save_cpu_arch_register(void);
 void restore_cpu_arch_register(void);
 

arch/arm/mach-tegra/sleep.S

@@ -27,6 +27,7 @@
 #include <asm/assembler.h>
 #include <asm/cache.h>
 #include <asm/cp15.h>
+#include <asm/hardware/cache-l2x0.h>
 
 #include "iomap.h"
 
@@ -98,6 +99,12 @@ ENTRY(tegra_shut_off_mmu)
 	dsb
 	mcr	p15, 0, r3, c1, c0, 0
 	isb
+#ifdef CONFIG_CACHE_L2X0
+	/* Disable L2 cache */
+	mov32	r4, TEGRA_ARM_PERIF_BASE + 0x3000
+	mov	r5, #0
+	str	r5, [r4, #L2X0_CTRL]
+#endif
 	mov	pc, r0
 ENDPROC(tegra_shut_off_mmu)
 	.popsection

arch/arm/mach-tegra/sleep.h

@@ -71,6 +71,38 @@
 	str	\tmp2, [\tmp1]			@ invalidate SCU tags for CPU
 	dsb
 .endm
+
+/* Macro to resume & re-enable L2 cache */
+#ifndef L2X0_CTRL_EN
+#define L2X0_CTRL_EN	1
+#endif
+
+#ifdef CONFIG_CACHE_L2X0
+.macro l2_cache_resume, tmp1, tmp2, tmp3, phys_l2x0_saved_regs
+	adr	\tmp1, \phys_l2x0_saved_regs
+	ldr	\tmp1, [\tmp1]
+	ldr	\tmp2, [\tmp1, #L2X0_R_PHY_BASE]
+	ldr	\tmp3, [\tmp2, #L2X0_CTRL]
+	tst	\tmp3, #L2X0_CTRL_EN
+	bne	exit_l2_resume
+	ldr	\tmp3, [\tmp1, #L2X0_R_TAG_LATENCY]
+	str	\tmp3, [\tmp2, #L2X0_TAG_LATENCY_CTRL]
+	ldr	\tmp3, [\tmp1, #L2X0_R_DATA_LATENCY]
+	str	\tmp3, [\tmp2, #L2X0_DATA_LATENCY_CTRL]
+	ldr	\tmp3, [\tmp1, #L2X0_R_PREFETCH_CTRL]
+	str	\tmp3, [\tmp2, #L2X0_PREFETCH_CTRL]
+	ldr	\tmp3, [\tmp1, #L2X0_R_PWR_CTRL]
+	str	\tmp3, [\tmp2, #L2X0_POWER_CTRL]
+	ldr	\tmp3, [\tmp1, #L2X0_R_AUX_CTRL]
+	str	\tmp3, [\tmp2, #L2X0_AUX_CTRL]
+	mov	\tmp3, #L2X0_CTRL_EN
+	str	\tmp3, [\tmp2, #L2X0_CTRL]
+exit_l2_resume:
+.endm
+#else /* CONFIG_CACHE_L2X0 */
+.macro l2_cache_resume, tmp1, tmp2, tmp3, phys_l2x0_saved_regs
+.endm
+#endif /* CONFIG_CACHE_L2X0 */
 #else
 void tegra_resume(void);
 int tegra_sleep_cpu_finish(unsigned long);