提交 29338004 编写于 作者: C Chaoming Li 提交者: John W. Linville

rtlwifi: rtl8192se: Merge led routines

Merge routines led.c and led.h for RTL8192SE.
Signed-off-by: NChaoming_Li <chaoming_li@realsil.com.cn>
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 24284531
/******************************************************************************
*
* Copyright(c) 2009-2010 Realtek Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* wlanfae <wlanfae@realtek.com>
* Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
* Hsinchu 300, Taiwan.
*
* Larry Finger <Larry.Finger@lwfinger.net>
*
*****************************************************************************/
#include "../wifi.h"
#include "../pci.h"
#include "reg.h"
#include "led.h"
static void _rtl92se_init_led(struct ieee80211_hw *hw,
struct rtl_led *pled, enum rtl_led_pin ledpin)
{
pled->hw = hw;
pled->ledpin = ledpin;
pled->ledon = false;
}
void rtl92se_init_sw_leds(struct ieee80211_hw *hw)
{
struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
_rtl92se_init_led(hw, &(pcipriv->ledctl.sw_led0), LED_PIN_LED0);
_rtl92se_init_led(hw, &(pcipriv->ledctl.sw_led1), LED_PIN_LED1);
}
void rtl92se_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
{
u8 ledcfg;
struct rtl_priv *rtlpriv = rtl_priv(hw);
RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD,
("LedAddr:%X ledpin=%d\n", LEDCFG, pled->ledpin));
ledcfg = rtl_read_byte(rtlpriv, LEDCFG);
switch (pled->ledpin) {
case LED_PIN_GPIO0:
break;
case LED_PIN_LED0:
rtl_write_byte(rtlpriv, LEDCFG, ledcfg & 0xf0);
break;
case LED_PIN_LED1:
rtl_write_byte(rtlpriv, LEDCFG, ledcfg & 0x0f);
break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
("switch case not process\n"));
break;
}
pled->ledon = true;
}
void rtl92se_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
u8 ledcfg;
RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD,
("LedAddr:%X ledpin=%d\n", LEDCFG, pled->ledpin));
ledcfg = rtl_read_byte(rtlpriv, LEDCFG);
switch (pled->ledpin) {
case LED_PIN_GPIO0:
break;
case LED_PIN_LED0:
ledcfg &= 0xf0;
if (pcipriv->ledctl.led_opendrain == true)
rtl_write_byte(rtlpriv, LEDCFG, (ledcfg | BIT(1)));
else
rtl_write_byte(rtlpriv, LEDCFG, (ledcfg | BIT(3)));
break;
case LED_PIN_LED1:
ledcfg &= 0x0f;
rtl_write_byte(rtlpriv, LEDCFG, (ledcfg | BIT(3)));
break;
default:
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
("switch case not process\n"));
break;
}
pled->ledon = false;
}
static void _rtl92se_sw_led_control(struct ieee80211_hw *hw,
enum led_ctl_mode ledaction)
{
struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
struct rtl_led *pLed0 = &(pcipriv->ledctl.sw_led0);
switch (ledaction) {
case LED_CTL_POWER_ON:
case LED_CTL_LINK:
case LED_CTL_NO_LINK:
rtl92se_sw_led_on(hw, pLed0);
break;
case LED_CTL_POWER_OFF:
rtl92se_sw_led_off(hw, pLed0);
break;
default:
break;
}
}
void rtl92se_led_control(struct ieee80211_hw *hw, enum led_ctl_mode ledaction)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
if ((ppsc->rfoff_reason > RF_CHANGE_BY_PS) &&
(ledaction == LED_CTL_TX ||
ledaction == LED_CTL_RX ||
ledaction == LED_CTL_SITE_SURVEY ||
ledaction == LED_CTL_LINK ||
ledaction == LED_CTL_NO_LINK ||
ledaction == LED_CTL_START_TO_LINK ||
ledaction == LED_CTL_POWER_ON)) {
return;
}
RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD, ("ledaction %d,\n",
ledaction));
_rtl92se_sw_led_control(hw, ledaction);
}
/******************************************************************************
*
* Copyright(c) 2009-2010 Realtek Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* wlanfae <wlanfae@realtek.com>
* Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
* Hsinchu 300, Taiwan.
*
* Larry Finger <Larry.Finger@lwfinger.net>
*
*****************************************************************************/
#ifndef __REALTEK_PCI92SE_LED_H__
#define __REALTEK_PCI92SE_LED_H__
void rtl92se_init_sw_leds(struct ieee80211_hw *hw);
void rtl92se_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled);
void rtl92se_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled);
void rtl92se_led_control(struct ieee80211_hw *hw, enum led_ctl_mode ledaction);
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册