提交 2894500d 编写于 作者: J Jiri Slaby 提交者: Greg Kroah-Hartman

TTY: ip22zilog, fix tty_flip_buffer_push call

This one was omitted by the "TTY: switch tty_flip_buffer_push" patch
because I did not compile-test mips driver. Now I do.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 f5836a55
......@@ -248,17 +248,12 @@ static void ip22zilog_maybe_update_regs(struct uart_ip22zilog_port *up,
#define Rx_BRK 0x0100 /* BREAK event software flag. */
#define Rx_SYS 0x0200 /* SysRq event software flag. */
static struct tty_struct *ip22zilog_receive_chars(struct uart_ip22zilog_port *up,
static bool ip22zilog_receive_chars(struct uart_ip22zilog_port *up,
struct zilog_channel *channel)
{
struct tty_struct *tty;
unsigned char ch, flag;
unsigned int r1;
tty = NULL;
if (up->port.state != NULL &&
up->port.state->port.tty != NULL)
tty = up->port.state->port.tty;
bool push = up->port.state != NULL;
for (;;) {
ch = readb(&channel->control);
......@@ -312,10 +307,10 @@ static struct tty_struct *ip22zilog_receive_chars(struct uart_ip22zilog_port *up
if (uart_handle_sysrq_char(&up->port, ch))
continue;
if (tty)
if (push)
uart_insert_char(&up->port, r1, Rx_OVR, ch, flag);
}
return tty;
return push;
}
static void ip22zilog_status_handle(struct uart_ip22zilog_port *up,
......@@ -438,21 +433,20 @@ static irqreturn_t ip22zilog_interrupt(int irq, void *dev_id)
while (up) {
struct zilog_channel *channel
= ZILOG_CHANNEL_FROM_PORT(&up->port);
struct tty_struct *tty;
unsigned char r3;
bool push = false;
spin_lock(&up->port.lock);
r3 = read_zsreg(channel, R3);
/* Channel A */
tty = NULL;
if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
writeb(RES_H_IUS, &channel->control);
ZSDELAY();
ZS_WSYNC(channel);
if (r3 & CHARxIP)
tty = ip22zilog_receive_chars(up, channel);
push = ip22zilog_receive_chars(up, channel);
if (r3 & CHAEXT)
ip22zilog_status_handle(up, channel);
if (r3 & CHATxIP)
......@@ -460,22 +454,22 @@ static irqreturn_t ip22zilog_interrupt(int irq, void *dev_id)
}
spin_unlock(&up->port.lock);
if (tty)
tty_flip_buffer_push(tty);
if (push)
tty_flip_buffer_push(&up->port.state->port);
/* Channel B */
up = up->next;
channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
push = false;
spin_lock(&up->port.lock);
tty = NULL;
if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
writeb(RES_H_IUS, &channel->control);
ZSDELAY();
ZS_WSYNC(channel);
if (r3 & CHBRxIP)
tty = ip22zilog_receive_chars(up, channel);
push = ip22zilog_receive_chars(up, channel);
if (r3 & CHBEXT)
ip22zilog_status_handle(up, channel);
if (r3 & CHBTxIP)
......@@ -483,8 +477,8 @@ static irqreturn_t ip22zilog_interrupt(int irq, void *dev_id)
}
spin_unlock(&up->port.lock);
if (tty)
tty_flip_buffer_push(tty);
if (push)
tty_flip_buffer_push(&up->port.state->port);
up = up->next;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册