提交 288fb7ff 编写于 作者: A Alexandre Belloni

ARM: at91/dt: sama5d3: use slow clock where necessary

The watchdog, the reset controller, the RTC, the shutdown controller, the
timer counters and the LCD PWM need the slow clock, add it where necessary.

[boris.brezillon@free-electrons.com: add tcb clocks]
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
上级 39c64915
......@@ -145,8 +145,8 @@
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf0010000 0x100>;
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&tcb0_clk>;
clock-names = "t0_clk";
clocks = <&tcb0_clk>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
i2c0: i2c@f0014000 {
......@@ -1261,11 +1261,13 @@
rstc@fffffe00 {
compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
reg = <0xfffffe00 0x10>;
clocks = <&clk32k>;
};
shutdown-controller@fffffe10 {
compatible = "atmel,at91sam9x5-shdwc";
reg = <0xfffffe10 0x10>;
clocks = <&clk32k>;
};
pit: timer@fffffe30 {
......@@ -1279,6 +1281,7 @@
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffe40 0x10>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&clk32k>;
atmel,watchdog-type = "hardware";
atmel,reset-type = "all";
atmel,dbg-halt;
......@@ -1315,6 +1318,7 @@
compatible = "atmel,at91rm9200-rtc";
reg = <0xfffffeb0 0x30>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&clk32k>;
};
};
......
......@@ -31,8 +31,8 @@
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf8014000 0x100>;
interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&tcb1_clk>;
clock-names = "t0_clk";
clocks = <&tcb1_clk>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
};
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册