提交 27dff8b2 编写于 作者: T Todd Fujinaka 提交者: Jeff Kirsher

igb: add defaults for i210 TX/RX PBSIZE

Set the defaults on probe for the packet buffer size registers for the
i210.
Signed-off-by: NTodd Fujinaka <todd.fujinaka@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
上级 3cfcf036
......@@ -329,6 +329,9 @@
/* Timestamp in Rx buffer */
#define E1000_RXPBS_CFG_TS_EN 0x80000000
#define I210_RXPBSIZE_DEFAULT 0x000000A2 /* RXPBSIZE default */
#define I210_TXPBSIZE_DEFAULT 0x04000014 /* TXPBSIZE default */
/* SerDes Control */
#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400
......
......@@ -192,6 +192,10 @@
: (0x0E038 + ((_n) * 0x40)))
#define E1000_TDWBAH(_n) ((_n) < 4 ? (0x0383C + ((_n) * 0x100)) \
: (0x0E03C + ((_n) * 0x40)))
#define E1000_RXPBS 0x02404 /* Rx Packet Buffer Size - RW */
#define E1000_TXPBS 0x03404 /* Tx Packet Buffer Size - RW */
#define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */
#define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */
#define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */
......
......@@ -2433,6 +2433,12 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/* get firmware version for ethtool -i */
igb_set_fw_version(adapter);
/* configure RXPBSIZE and TXPBSIZE */
if (hw->mac.type == e1000_i210) {
wr32(E1000_RXPBS, I210_RXPBSIZE_DEFAULT);
wr32(E1000_TXPBS, I210_TXPBSIZE_DEFAULT);
}
setup_timer(&adapter->watchdog_timer, igb_watchdog,
(unsigned long) adapter);
setup_timer(&adapter->phy_info_timer, igb_update_phy_info,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册