Merge tag 'tty-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial fixes from Greg KH:
 "Here are a small number (5) of patches for some reported TTY and
  serial issues. Nothing major, a documentation update, timing fix,
  error handling fix, name reporting fix, and a timeout issue resolved.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: sccnxp: Fix error handling in sccnxp_probe()
  tty: serial: lpuart: avoid report NULL interrupt
  serial: bcm63xx: fix timing issue.
  mxser: fix timeout calculation for low rates
  serial: sh-sci: document R8A77970 bindings

Documentation/devicetree/bindings/serial/renesas,sci-serial.txt

@@ -41,6 +41,8 @@ Required properties:
     - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART.
     - "renesas,scif-r8a7796" for R8A7796 (R-Car M3-W) SCIF compatible UART.
     - "renesas,hscif-r8a7796" for R8A7796 (R-Car M3-W) HSCIF compatible UART.
+    - "renesas,scif-r8a77970" for R8A77970 (R-Car V3M) SCIF compatible UART.
+    - "renesas,hscif-r8a77970" for R8A77970 (R-Car V3M) HSCIF compatible UART.
     - "renesas,scif-r8a77995" for R8A77995 (R-Car D3) SCIF compatible UART.
     - "renesas,hscif-r8a77995" for R8A77995 (R-Car D3) HSCIF compatible UART.
     - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART.

drivers/tty/mxser.c

@@ -246,11 +246,11 @@ struct mxser_port {
 	unsigned char err_shadow;
 
 	struct async_icount icount; /* kernel counters for 4 input interrupts */
-	int timeout;
+	unsigned int timeout;
 
 	int read_status_mask;
 	int ignore_status_mask;
-	int xmit_fifo_size;
+	unsigned int xmit_fifo_size;
 	int xmit_head;
 	int xmit_tail;
 	int xmit_cnt;
@@ -572,8 +572,9 @@ static void mxser_dtr_rts(struct tty_port *port, int on)
 static int mxser_set_baud(struct tty_struct *tty, long newspd)
 {
 	struct mxser_port *info = tty->driver_data;
-	int quot = 0, baud;
+	unsigned int quot = 0, baud;
 	unsigned char cval;
+	u64 timeout;
 
 	if (!info->ioaddr)
 		return -1;
@@ -594,8 +595,13 @@ static int mxser_set_baud(struct tty_struct *tty, long newspd)
 		quot = 0;
 	}
 
-	info->timeout = ((info->xmit_fifo_size * HZ * 10 * quot) / info->baud_base);
-	info->timeout += HZ / 50;	/* Add .02 seconds of slop */
+	/*
+	 * worst case (128 * 1000 * 10 * 18432) needs 35 bits, so divide in the
+	 * u64 domain
+	 */
+	timeout = (u64)info->xmit_fifo_size * HZ * 10 * quot;
+	do_div(timeout, info->baud_base);
+	info->timeout = timeout + HZ / 50; /* Add .02 seconds of slop */
 
 	if (quot) {
 		info->MCR |= UART_MCR_DTR;

drivers/tty/serial/bcm63xx_uart.c

@@ -507,9 +507,14 @@ static void bcm_uart_set_termios(struct uart_port *port,
 {
 	unsigned int ctl, baud, quot, ier;
 	unsigned long flags;
+	int tries;
 
 	spin_lock_irqsave(&port->lock, flags);
 
+	/* Drain the hot tub fully before we power it off for the winter. */
+	for (tries = 3; !bcm_uart_tx_empty(port) && tries; tries--)
+		mdelay(10);
+
 	/* disable uart while changing speed */
 	bcm_uart_disable(port);
 	bcm_uart_flush(port);

drivers/tty/serial/fsl_lpuart.c

@@ -1276,7 +1276,6 @@ static void rx_dma_timer_init(struct lpuart_port *sport)
 static int lpuart_startup(struct uart_port *port)
 {
 	struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
-	int ret;
 	unsigned long flags;
 	unsigned char temp;
 
@@ -1291,11 +1290,6 @@ static int lpuart_startup(struct uart_port *port)
 	sport->rxfifo_size = 0x1 << (((temp >> UARTPFIFO_RXSIZE_OFF) &
 		UARTPFIFO_FIFOSIZE_MASK) + 1);
 
-	ret = devm_request_irq(port->dev, port->irq, lpuart_int, 0,
-				DRIVER_NAME, sport);
-	if (ret)
-		return ret;
-
 	spin_lock_irqsave(&sport->port.lock, flags);
 
 	lpuart_setup_watermark(sport);
@@ -1333,7 +1327,6 @@ static int lpuart_startup(struct uart_port *port)
 static int lpuart32_startup(struct uart_port *port)
 {
 	struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
-	int ret;
 	unsigned long flags;
 	unsigned long temp;
 
@@ -1346,11 +1339,6 @@ static int lpuart32_startup(struct uart_port *port)
 	sport->rxfifo_size = 0x1 << (((temp >> UARTFIFO_RXSIZE_OFF) &
 		UARTFIFO_FIFOSIZE_MASK) - 1);
 
-	ret = devm_request_irq(port->dev, port->irq, lpuart32_int, 0,
-				DRIVER_NAME, sport);
-	if (ret)
-		return ret;
-
 	spin_lock_irqsave(&sport->port.lock, flags);
 
 	lpuart32_setup_watermark(sport);
@@ -1380,8 +1368,6 @@ static void lpuart_shutdown(struct uart_port *port)
 
 	spin_unlock_irqrestore(&port->lock, flags);
 
-	devm_free_irq(port->dev, port->irq, sport);
-
 	if (sport->lpuart_dma_rx_use) {
 		del_timer_sync(&sport->lpuart_timer);
 		lpuart_dma_rx_free(&sport->port);
@@ -1400,7 +1386,6 @@ static void lpuart_shutdown(struct uart_port *port)
 
 static void lpuart32_shutdown(struct uart_port *port)
 {
-	struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
 	unsigned long temp;
 	unsigned long flags;
 
@@ -1413,8 +1398,6 @@ static void lpuart32_shutdown(struct uart_port *port)
 	lpuart32_write(port, temp, UARTCTRL);
 
 	spin_unlock_irqrestore(&port->lock, flags);
-
-	devm_free_irq(port->dev, port->irq, sport);
 }
 
 static void
@@ -2212,16 +2195,22 @@ static int lpuart_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, &sport->port);
 
-	if (lpuart_is_32(sport))
+	if (lpuart_is_32(sport)) {
 		lpuart_reg.cons = LPUART32_CONSOLE;
-	else
+		ret = devm_request_irq(&pdev->dev, sport->port.irq, lpuart32_int, 0,
+					DRIVER_NAME, sport);
+	} else {
 		lpuart_reg.cons = LPUART_CONSOLE;
+		ret = devm_request_irq(&pdev->dev, sport->port.irq, lpuart_int, 0,
+					DRIVER_NAME, sport);
+	}
+
+	if (ret)
+		goto failed_irq_request;
 
 	ret = uart_add_one_port(&lpuart_reg, &sport->port);
-	if (ret) {
-		clk_disable_unprepare(sport->clk);
-		return ret;
-	}
+	if (ret)
+		goto failed_attach_port;
 
 	sport->dma_tx_chan = dma_request_slave_channel(sport->port.dev, "tx");
 	if (!sport->dma_tx_chan)
@@ -2240,6 +2229,11 @@ static int lpuart_probe(struct platform_device *pdev)
 	}
 
 	return 0;
+
+failed_attach_port:
+failed_irq_request:
+	clk_disable_unprepare(sport->clk);
+	return ret;
 }
 
 static int lpuart_remove(struct platform_device *pdev)

drivers/tty/serial/sccnxp.c

@@ -889,7 +889,16 @@ static int sccnxp_probe(struct platform_device *pdev)
 			goto err_out;
 		uartclk = 0;
 	} else {
-		clk_prepare_enable(clk);
+		ret = clk_prepare_enable(clk);
+		if (ret)
+			goto err_out;
+
+		ret = devm_add_action_or_reset(&pdev->dev,
+				(void(*)(void *))clk_disable_unprepare,
+				clk);
+		if (ret)
+			goto err_out;
+
 		uartclk = clk_get_rate(clk);
 	}
 
@@ -988,7 +997,7 @@ static int sccnxp_probe(struct platform_device *pdev)
 	uart_unregister_driver(&s->uart);
 err_out:
 	if (!IS_ERR(s->regulator))
-		return regulator_disable(s->regulator);
+		regulator_disable(s->regulator);
 
 	return ret;
 }