iwlwifi: mvm: remove dead gscan code

There was a bunch of code to support gscan which has never been used.
Remove it all to cleanup and get rid of a lot of dead code.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

drivers/net/wireless/intel/iwlwifi/Makefile

@@ -14,7 +14,6 @@ iwlwifi-$(CONFIG_IWLMVM) += cfg/7000.o cfg/8000.o cfg/9000.o cfg/22000.o
 iwlwifi-objs		+= iwl-trans.o
 iwlwifi-objs		+= fw/notif-wait.o
 iwlwifi-$(CONFIG_IWLMVM) += fw/paging.o fw/smem.o fw/init.o fw/dbg.o
-iwlwifi-$(CONFIG_IWLMVM) += fw/common_rx.o
 iwlwifi-$(CONFIG_ACPI) += fw/acpi.o
 iwlwifi-$(CONFIG_IWLWIFI_DEBUGFS) += fw/debugfs.o
 

drivers/net/wireless/intel/iwlwifi/fw/file.h

@@ -321,7 +321,7 @@ typedef unsigned int __bitwise iwl_ucode_tlv_capa_t;
  *	IWL_UCODE_TLV_API_WIFI_MCC_UPDATE. When either is set, multi-source LAR
  *	is supported.
  * @IWL_UCODE_TLV_CAPA_BT_COEX_RRC: supports BT Coex RRC
- * @IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT: supports gscan
+ * @IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT: supports gscan (no longer used)
  * @IWL_UCODE_TLV_CAPA_STA_PM_NOTIF: firmware will send STA PM notification
  * @IWL_UCODE_TLV_CAPA_TLC_OFFLOAD: firmware implements rate scaling algorithm
  * @IWL_UCODE_TLV_CAPA_DYNAMIC_QUOTA: firmware implements quota related
@@ -892,39 +892,4 @@ struct iwl_fw_dbg_conf_tlv {
 	struct iwl_fw_dbg_conf_hcmd hcmd;
 } __packed;
 
-/**
- * struct iwl_fw_gscan_capabilities - gscan capabilities supported by FW
- * @max_scan_cache_size: total space allocated for scan results (in bytes).
- * @max_scan_buckets: maximum number of channel buckets.
- * @max_ap_cache_per_scan: maximum number of APs that can be stored per scan.
- * @max_rssi_sample_size: number of RSSI samples used for averaging RSSI.
- * @max_scan_reporting_threshold: max possible report threshold. in percentage.
- * @max_hotlist_aps: maximum number of entries for hotlist APs.
- * @max_significant_change_aps: maximum number of entries for significant
- *	change APs.
- * @max_bssid_history_entries: number of BSSID/RSSI entries that the device can
- *	hold.
- * @max_hotlist_ssids: maximum number of entries for hotlist SSIDs.
- * @max_number_epno_networks: max number of epno entries.
- * @max_number_epno_networks_by_ssid: max number of epno entries if ssid is
- *	specified.
- * @max_number_of_white_listed_ssid: max number of white listed SSIDs.
- * @max_number_of_black_listed_ssid: max number of black listed SSIDs.
- */
-struct iwl_fw_gscan_capabilities {
-	__le32 max_scan_cache_size;
-	__le32 max_scan_buckets;
-	__le32 max_ap_cache_per_scan;
-	__le32 max_rssi_sample_size;
-	__le32 max_scan_reporting_threshold;
-	__le32 max_hotlist_aps;
-	__le32 max_significant_change_aps;
-	__le32 max_bssid_history_entries;
-	__le32 max_hotlist_ssids;
-	__le32 max_number_epno_networks;
-	__le32 max_number_epno_networks_by_ssid;
-	__le32 max_number_of_white_listed_ssid;
-	__le32 max_number_of_black_listed_ssid;
-} __packed;
-
 #endif  /* __iwl_fw_file_h__ */

drivers/net/wireless/intel/iwlwifi/fw/img.h

@@ -192,41 +192,6 @@ struct iwl_fw_cscheme_list {
 	struct iwl_fw_cipher_scheme cs[];
 } __packed;
 
-/**
- * struct iwl_gscan_capabilities - gscan capabilities supported by FW
- * @max_scan_cache_size: total space allocated for scan results (in bytes).
- * @max_scan_buckets: maximum number of channel buckets.
- * @max_ap_cache_per_scan: maximum number of APs that can be stored per scan.
- * @max_rssi_sample_size: number of RSSI samples used for averaging RSSI.
- * @max_scan_reporting_threshold: max possible report threshold. in percentage.
- * @max_hotlist_aps: maximum number of entries for hotlist APs.
- * @max_significant_change_aps: maximum number of entries for significant
- *	change APs.
- * @max_bssid_history_entries: number of BSSID/RSSI entries that the device can
- *	hold.
- * @max_hotlist_ssids: maximum number of entries for hotlist SSIDs.
- * @max_number_epno_networks: max number of epno entries.
- * @max_number_epno_networks_by_ssid: max number of epno entries if ssid is
- *	specified.
- * @max_number_of_white_listed_ssid: max number of white listed SSIDs.
- * @max_number_of_black_listed_ssid: max number of black listed SSIDs.
- */
-struct iwl_gscan_capabilities {
-	u32 max_scan_cache_size;
-	u32 max_scan_buckets;
-	u32 max_ap_cache_per_scan;
-	u32 max_rssi_sample_size;
-	u32 max_scan_reporting_threshold;
-	u32 max_hotlist_aps;
-	u32 max_significant_change_aps;
-	u32 max_bssid_history_entries;
-	u32 max_hotlist_ssids;
-	u32 max_number_epno_networks;
-	u32 max_number_epno_networks_by_ssid;
-	u32 max_number_of_white_listed_ssid;
-	u32 max_number_of_black_listed_ssid;
-};
-
 /**
  * enum iwl_fw_type - iwlwifi firmware type
  * @IWL_FW_DVM: DVM firmware
@@ -298,7 +263,6 @@ struct iwl_fw {
 	size_t n_dbg_mem_tlv;
 	size_t dbg_trigger_tlv_len[FW_DBG_TRIGGER_MAX];
 	u8 dbg_dest_reg_num;
-	struct iwl_gscan_capabilities gscan_capa;
 	u32 dbg_dump_mask;
 };
 

drivers/net/wireless/intel/iwlwifi/iwl-drv.c

@@ -402,35 +402,6 @@ static int iwl_store_cscheme(struct iwl_fw *fw, const u8 *data, const u32 len)
 	return 0;
 }
 
-static void iwl_store_gscan_capa(struct iwl_fw *fw, const u8 *data,
-				 const u32 len)
-{
-	struct iwl_fw_gscan_capabilities *fw_capa = (void *)data;
-	struct iwl_gscan_capabilities *capa = &fw->gscan_capa;
-
-	capa->max_scan_cache_size = le32_to_cpu(fw_capa->max_scan_cache_size);
-	capa->max_scan_buckets = le32_to_cpu(fw_capa->max_scan_buckets);
-	capa->max_ap_cache_per_scan =
-		le32_to_cpu(fw_capa->max_ap_cache_per_scan);
-	capa->max_rssi_sample_size = le32_to_cpu(fw_capa->max_rssi_sample_size);
-	capa->max_scan_reporting_threshold =
-		le32_to_cpu(fw_capa->max_scan_reporting_threshold);
-	capa->max_hotlist_aps = le32_to_cpu(fw_capa->max_hotlist_aps);
-	capa->max_significant_change_aps =
-		le32_to_cpu(fw_capa->max_significant_change_aps);
-	capa->max_bssid_history_entries =
-		le32_to_cpu(fw_capa->max_bssid_history_entries);
-	capa->max_hotlist_ssids = le32_to_cpu(fw_capa->max_hotlist_ssids);
-	capa->max_number_epno_networks =
-		le32_to_cpu(fw_capa->max_number_epno_networks);
-	capa->max_number_epno_networks_by_ssid =
-		le32_to_cpu(fw_capa->max_number_epno_networks_by_ssid);
-	capa->max_number_of_white_listed_ssid =
-		le32_to_cpu(fw_capa->max_number_of_white_listed_ssid);
-	capa->max_number_of_black_listed_ssid =
-		le32_to_cpu(fw_capa->max_number_of_black_listed_ssid);
-}
-
 /*
  * Gets uCode section from tlv.
  */
@@ -644,7 +615,6 @@ static int iwl_parse_tlv_firmware(struct iwl_drv *drv,
 	u32 build, paging_mem_size;
 	int num_of_cpus;
 	bool usniffer_req = false;
-	bool gscan_capa = false;
 
 	if (len < sizeof(*ucode)) {
 		IWL_ERR(drv, "uCode has invalid length: %zd\n", len);
@@ -1090,16 +1060,7 @@ static int iwl_parse_tlv_firmware(struct iwl_drv *drv,
 				paging_mem_size;
 			break;
 		case IWL_UCODE_TLV_FW_GSCAN_CAPA:
-			/*
-			 * Don't return an error in case of a shorter tlv_len
-			 * to enable loading of FW that has an old format
-			 * of GSCAN capabilities TLV.
-			 */
-			if (tlv_len < sizeof(struct iwl_fw_gscan_capabilities))
-				break;
-
-			iwl_store_gscan_capa(&drv->fw, tlv_data, tlv_len);
-			gscan_capa = true;
+			/* ignored */
 			break;
 		case IWL_UCODE_TLV_FW_MEM_SEG: {
 			struct iwl_fw_dbg_mem_seg_tlv *dbg_mem =
@@ -1164,19 +1125,6 @@ static int iwl_parse_tlv_firmware(struct iwl_drv *drv,
 		return -EINVAL;
 	}
 
-	/*
-	 * If ucode advertises that it supports GSCAN but GSCAN
-	 * capabilities TLV is not present, or if it has an old format,
-	 * warn and continue without GSCAN.
-	 */
-	if (fw_has_capa(capa, IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT) &&
-	    !gscan_capa) {
-		IWL_DEBUG_INFO(drv,
-			       "GSCAN is supported but capabilities TLV is unavailable\n");
-		__clear_bit((__force long)IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT,
-			    capa->_capa);
-	}
-
 	return 0;
 
  invalid_tlv_len: