igb: add additional error handling to the phy code

This update adds additional exception handling to the phy code to handle
situations where it may be called incorrectly.  In addition it adds some
bounds checking to the cable length checks to prevent an array overrun in
the event that the hardware returned a different value than expected.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/igb/e1000_phy.c

@@ -39,6 +39,9 @@ static s32  igb_wait_autoneg(struct e1000_hw *hw);
 /* Cable length tables */
 static const u16 e1000_m88_cable_length_table[] =
 	{ 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
+#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
+                (sizeof(e1000_m88_cable_length_table) / \
+                 sizeof(e1000_m88_cable_length_table[0]))
 
 static const u16 e1000_igp_2_cable_length_table[] =
     { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21,
@@ -109,7 +112,10 @@ s32 igb_get_phy_id(struct e1000_hw *hw)
  **/
 static s32 igb_phy_reset_dsp(struct e1000_hw *hw)
 {
-	s32 ret_val;
+	s32 ret_val = 0;
+
+	if (!(hw->phy.ops.write_reg))
+		goto out;
 
 	ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xC1);
 	if (ret_val)
@@ -1059,22 +1065,19 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw)
 
 	igb_phy_force_speed_duplex_setup(hw, &phy_data);
 
-	/* Reset the phy to commit changes. */
-	phy_data |= MII_CR_RESET;
-
 	ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
 	if (ret_val)
 		goto out;
 
-	udelay(1);
+	/* Reset the phy to commit changes. */
+	ret_val = igb_phy_sw_reset(hw);
+	if (ret_val)
+		goto out;
 
 	if (phy->autoneg_wait_to_complete) {
 		hw_dbg("Waiting for forced speed/duplex link on M88 phy.\n");
 
-		ret_val = igb_phy_has_link(hw,
-						     PHY_FORCE_LIMIT,
-						     100000,
-						     &link);
+		ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, 100000, &link);
 		if (ret_val)
 			goto out;
 
@@ -1084,8 +1087,8 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw)
 			 * Reset the DSP and cross our fingers.
 			 */
 			ret_val = phy->ops.write_reg(hw,
-						      M88E1000_PHY_PAGE_SELECT,
-						      0x001d);
+						     M88E1000_PHY_PAGE_SELECT,
+						     0x001d);
 			if (ret_val)
 				goto out;
 			ret_val = igb_phy_reset_dsp(hw);
@@ -1095,7 +1098,7 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw)
 
 		/* Try once more */
 		ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT,
-					     100000, &link);
+					   100000, &link);
 		if (ret_val)
 			goto out;
 	}
@@ -1207,9 +1210,12 @@ static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw,
 s32 igb_set_d3_lplu_state(struct e1000_hw *hw, bool active)
 {
 	struct e1000_phy_info *phy = &hw->phy;
-	s32 ret_val;
+	s32 ret_val = 0;
 	u16 data;
 
+	if (!(hw->phy.ops.read_reg))
+		goto out;
+
 	ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data);
 	if (ret_val)
 		goto out;
@@ -1495,8 +1501,13 @@ s32 igb_get_cable_length_m88(struct e1000_hw *hw)
 
 	index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
 		M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+	if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) {
+		ret_val = -E1000_ERR_PHY;
+		goto out;
+	}
+
 	phy->min_cable_length = e1000_m88_cable_length_table[index];
-	phy->max_cable_length = e1000_m88_cable_length_table[index+1];
+	phy->max_cable_length = e1000_m88_cable_length_table[index + 1];
 
 	phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;