提交 2408022e 编写于 作者: D David S. Miller

Merge branch 'liqudio-VF-data-path'

Raghu Vatsavayi says:

====================
liquidio VF data path

Following is V3 patch series that adds support for VF
data path related features. It also has following changes
related to previous comments:
1) Remove unnecessary "void *" casting.
2) Remove inline for functions and let gcc decide.

Please apply patches in following order as some of them
depend on earlier patches.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
......@@ -529,6 +529,26 @@ static u64 cn23xx_vf_msix_interrupt_handler(void *dev)
return ret;
}
static u32 cn23xx_update_read_index(struct octeon_instr_queue *iq)
{
u32 pkt_in_done = readl(iq->inst_cnt_reg);
u32 last_done;
u32 new_idx;
last_done = pkt_in_done - iq->pkt_in_done;
iq->pkt_in_done = pkt_in_done;
/* Modulo of the new index with the IQ size will give us
* the new index. The iq->reset_instr_cnt is always zero for
* cn23xx, so no extra adjustments are needed.
*/
new_idx = (iq->octeon_read_index +
(u32)(last_done & CN23XX_PKT_IN_DONE_CNT_MASK)) %
iq->max_count;
return new_idx;
}
static void cn23xx_enable_vf_interrupt(struct octeon_device *oct, u8 intr_flag)
{
struct octeon_cn23xx_vf *cn23xx = (struct octeon_cn23xx_vf *)oct->chip;
......@@ -660,6 +680,7 @@ int cn23xx_setup_octeon_vf_device(struct octeon_device *oct)
oct->fn_list.msix_interrupt_handler = cn23xx_vf_msix_interrupt_handler;
oct->fn_list.setup_device_regs = cn23xx_setup_vf_device_regs;
oct->fn_list.update_iq_read_idx = cn23xx_update_read_index;
oct->fn_list.enable_interrupt = cn23xx_enable_vf_interrupt;
oct->fn_list.disable_interrupt = cn23xx_disable_vf_interrupt;
......
......@@ -212,6 +212,7 @@ static inline void add_sg_size(struct octeon_sg_entry *sg_entry,
#define OCTNET_CMD_ID_ACTIVE 0x1a
#define OCTNET_CMD_SET_UC_LIST 0x1b
#define OCTNET_CMD_SET_VF_LINKSTATE 0x1c
#define OCTNET_CMD_VXLAN_PORT_ADD 0x0
#define OCTNET_CMD_VXLAN_PORT_DEL 0x1
......
......@@ -1221,6 +1221,9 @@ struct octeon_config *octeon_get_conf(struct octeon_device *oct)
} else if (OCTEON_CN23XX_PF(oct)) {
default_oct_conf = (struct octeon_config *)
(CHIP_CONF(oct, cn23xx_pf));
} else if (OCTEON_CN23XX_VF(oct)) {
default_oct_conf = (struct octeon_config *)
(CHIP_CONF(oct, cn23xx_vf));
}
return default_oct_conf;
}
......@@ -1371,7 +1374,7 @@ void lio_enable_irq(struct octeon_droq *droq, struct octeon_instr_queue *iq)
/*write resend. Writing RESEND in SLI_PKTX_CNTS should be enough
*to trigger tx interrupts as well, if they are pending.
*/
if (oct && OCTEON_CN23XX_PF(oct)) {
if (oct && (OCTEON_CN23XX_PF(oct) || OCTEON_CN23XX_VF(oct))) {
if (droq)
writeq(CN23XX_INTR_RESEND, droq->pkts_sent_reg);
/*we race with firmrware here. read and write the IN_DONE_CNTS*/
......
......@@ -28,6 +28,7 @@
#include "cn66xx_regs.h"
#include "cn66xx_device.h"
#include "cn23xx_pf_device.h"
#include "cn23xx_vf_device.h"
struct niclist {
struct list_head list;
......@@ -259,6 +260,11 @@ int octeon_init_droq(struct octeon_device *oct,
} else if (OCTEON_CN23XX_PF(oct)) {
struct octeon_config *conf23 = CHIP_CONF(oct, cn23xx_pf);
c_pkts_per_intr = (u32)CFG_GET_OQ_PKTS_PER_INTR(conf23);
c_refill_threshold = (u32)CFG_GET_OQ_REFILL_THRESHOLD(conf23);
} else if (OCTEON_CN23XX_VF(oct)) {
struct octeon_config *conf23 = CHIP_CONF(oct, cn23xx_vf);
c_pkts_per_intr = (u32)CFG_GET_OQ_PKTS_PER_INTR(conf23);
c_refill_threshold = (u32)CFG_GET_OQ_REFILL_THRESHOLD(conf23);
} else {
......@@ -889,6 +895,10 @@ octeon_process_droq_poll_cmd(struct octeon_device *oct, u32 q_no, int cmd,
lio_enable_irq(oct->droq[q_no], oct->instr_queue[q_no]);
}
break;
case OCTEON_CN23XX_VF_VID:
lio_enable_irq(oct->droq[q_no], oct->instr_queue[q_no]);
break;
}
return 0;
}
......
......@@ -123,6 +123,7 @@ struct lio {
/* work queue for link status */
struct cavium_wq link_status_wq;
int netdev_uc_count;
};
#define LIO_SIZE (sizeof(struct lio))
......
......@@ -394,7 +394,7 @@ lio_process_iq_request_list(struct octeon_device *oct,
case REQTYPE_SOFT_COMMAND:
sc = buf;
if (OCTEON_CN23XX_PF(oct))
if (OCTEON_CN23XX_PF(oct) || OCTEON_CN23XX_VF(oct))
irh = (struct octeon_instr_irh *)
&sc->cmd.cmd3.irh;
else
......@@ -607,7 +607,7 @@ octeon_prepare_soft_command(struct octeon_device *oct,
oct_cfg = octeon_get_conf(oct);
if (OCTEON_CN23XX_PF(oct)) {
if (OCTEON_CN23XX_PF(oct) || OCTEON_CN23XX_VF(oct)) {
ih3 = (struct octeon_instr_ih3 *)&sc->cmd.cmd3.ih3;
ih3->pkind = oct->instr_queue[sc->iq_no]->txpciq.s.pkind;
......@@ -700,7 +700,7 @@ int octeon_send_soft_command(struct octeon_device *oct,
struct octeon_instr_irh *irh;
u32 len;
if (OCTEON_CN23XX_PF(oct)) {
if (OCTEON_CN23XX_PF(oct) || OCTEON_CN23XX_VF(oct)) {
ih3 = (struct octeon_instr_ih3 *)&sc->cmd.cmd3.ih3;
if (ih3->dlengsz) {
WARN_ON(!sc->dmadptr);
......
......@@ -84,7 +84,8 @@ int lio_process_ordered_list(struct octeon_device *octeon_dev,
sc = (struct octeon_soft_command *)ordered_sc_list->
head.next;
if (OCTEON_CN23XX_PF(octeon_dev)) {
if (OCTEON_CN23XX_PF(octeon_dev) ||
OCTEON_CN23XX_VF(octeon_dev)) {
rdp = (struct octeon_instr_rdp *)&sc->cmd.cmd3.rdp;
rptr = sc->cmd.cmd3.rptr;
} else {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册