提交 23f591ea 编写于 作者: K Kalle Valo

ath10k: split driver info messages during device initialisation

Earlier we printed all the info messages after a successful device
initialisation and firmware boot, but that's problematic if something goes
wrong and there's no easy way to know what firmware version was used and so on.

Split the info messages into smaller pieces and print them as soon as we have
the info available.
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
上级 8605c022
......@@ -1751,6 +1751,8 @@ static int ath10k_core_probe_fw(struct ath10k *ar)
goto err_power_down;
}
ath10k_debug_print_hwfw_info(ar);
ret = ath10k_core_get_board_id_from_otp(ar);
if (ret && ret != -EOPNOTSUPP) {
ath10k_err(ar, "failed to get board id from otp: %d\n",
......@@ -1764,6 +1766,8 @@ static int ath10k_core_probe_fw(struct ath10k *ar)
goto err_free_firmware_files;
}
ath10k_debug_print_board_info(ar);
ret = ath10k_core_init_firmware_features(ar);
if (ret) {
ath10k_err(ar, "fatal problem with firmware features: %d\n",
......@@ -1786,7 +1790,7 @@ static int ath10k_core_probe_fw(struct ath10k *ar)
goto err_unlock;
}
ath10k_print_driver_info(ar);
ath10k_debug_print_boot_info(ar);
ath10k_core_stop(ar);
mutex_unlock(&ar->conf_mutex);
......
......@@ -122,41 +122,48 @@ void ath10k_info(struct ath10k *ar, const char *fmt, ...)
}
EXPORT_SYMBOL(ath10k_info);
void ath10k_print_driver_info(struct ath10k *ar)
void ath10k_debug_print_hwfw_info(struct ath10k *ar)
{
char fw_features[128] = {};
char boardinfo[100];
ath10k_core_get_fw_features_str(ar, fw_features, sizeof(fw_features));
if (ar->id.bmi_ids_valid)
scnprintf(boardinfo, sizeof(boardinfo), "%d:%d",
ar->id.bmi_chip_id, ar->id.bmi_board_id);
else
scnprintf(boardinfo, sizeof(boardinfo), "N/A");
ath10k_info(ar, "%s target 0x%08x chip_id 0x%08x sub %04x:%04x",
ar->hw_params.name,
ar->target_version,
ar->chip_id,
ar->id.subsystem_vendor, ar->id.subsystem_device);
ath10k_info(ar, "kconfig debug %d debugfs %d tracing %d dfs %d testmode %d\n",
config_enabled(CONFIG_ATH10K_DEBUG),
config_enabled(CONFIG_ATH10K_DEBUGFS),
config_enabled(CONFIG_ATH10K_TRACING),
config_enabled(CONFIG_ATH10K_DFS_CERTIFIED),
config_enabled(CONFIG_NL80211_TESTMODE));
ath10k_info(ar, "firmware ver %s api %d features %s\n",
ar->hw->wiphy->fw_version,
ar->fw_api,
fw_features);
}
void ath10k_debug_print_board_info(struct ath10k *ar)
{
char boardinfo[100];
if (ar->id.bmi_ids_valid)
scnprintf(boardinfo, sizeof(boardinfo), "%d:%d",
ar->id.bmi_chip_id, ar->id.bmi_board_id);
else
scnprintf(boardinfo, sizeof(boardinfo), "N/A");
ath10k_info(ar, "board_file api %d bmi_id %s",
ar->bd_api,
boardinfo);
}
ath10k_info(ar, "kconfig debug %d debugfs %d tracing %d dfs %d testmode %d\n",
config_enabled(CONFIG_ATH10K_DEBUG),
config_enabled(CONFIG_ATH10K_DEBUGFS),
config_enabled(CONFIG_ATH10K_TRACING),
config_enabled(CONFIG_ATH10K_DFS_CERTIFIED),
config_enabled(CONFIG_NL80211_TESTMODE));
void ath10k_debug_print_boot_info(struct ath10k *ar)
{
ath10k_info(ar, "htt-ver %d.%d wmi-op %d htt-op %d cal %s max-sta %d raw %d hwcrypto %d\n",
ar->htt.target_version_major,
ar->htt.target_version_minor,
......@@ -167,6 +174,13 @@ void ath10k_print_driver_info(struct ath10k *ar)
test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags),
!test_bit(ATH10K_FLAG_HW_CRYPTO_DISABLED, &ar->dev_flags));
}
void ath10k_print_driver_info(struct ath10k *ar)
{
ath10k_debug_print_hwfw_info(ar);
ath10k_debug_print_board_info(ar);
ath10k_debug_print_boot_info(ar);
}
EXPORT_SYMBOL(ath10k_print_driver_info);
void ath10k_err(struct ath10k *ar, const char *fmt, ...)
......
......@@ -63,6 +63,10 @@ extern unsigned int ath10k_debug_mask;
__printf(2, 3) void ath10k_info(struct ath10k *ar, const char *fmt, ...);
__printf(2, 3) void ath10k_err(struct ath10k *ar, const char *fmt, ...);
__printf(2, 3) void ath10k_warn(struct ath10k *ar, const char *fmt, ...);
void ath10k_debug_print_hwfw_info(struct ath10k *ar);
void ath10k_debug_print_board_info(struct ath10k *ar);
void ath10k_debug_print_boot_info(struct ath10k *ar);
void ath10k_print_driver_info(struct ath10k *ar);
#ifdef CONFIG_ATH10K_DEBUGFS
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册