ARM: set arch_gettimeoffset directly

remove ARM's struct sys_timer .offset function pointer, and instead
directly set the arch_gettimeoffset function pointer when the timer
driver is initialized. This requires multiplying all function results
by 1000, since the removed arm_gettimeoffset() did this. Also,
s/unsigned long/u32/ just to make the function prototypes exactly
match that of arch_gettimeoffset.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NStephen Warren <swarren@nvidia.com>

arch/arm/include/asm/mach/time.h

@@ -35,9 +35,6 @@ struct sys_timer {
 	void			(*init)(void);
 	void			(*suspend)(void);
 	void			(*resume)(void);
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-	unsigned long		(*offset)(void);
-#endif
 };
 
 extern void timer_tick(void);

arch/arm/kernel/time.c

@@ -69,16 +69,6 @@ unsigned long profile_pc(struct pt_regs *regs)
 EXPORT_SYMBOL(profile_pc);
 #endif
 
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-static u32 arm_gettimeoffset(void)
-{
-	if (system_timer->offset != NULL)
-		return system_timer->offset() * 1000;
-
-	return 0;
-}
-#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
-
 #ifndef CONFIG_GENERIC_CLOCKEVENTS
 /*
  * Kernel system timer support.
@@ -164,10 +154,6 @@ device_initcall(timer_init_syscore_ops);
 
 void __init time_init(void)
 {
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-	arch_gettimeoffset = arm_gettimeoffset;
-#endif
-
 	system_timer = machine_desc->timer;
 	system_timer->init();
 	sched_clock_postinit();

arch/arm/mach-at91/at91x40_time.c

@@ -42,9 +42,10 @@
 #define	AT91_TC_CLK1BASE	0x40
 #define	AT91_TC_CLK2BASE	0x80
 
-static unsigned long at91x40_gettimeoffset(void)
+static u32 at91x40_gettimeoffset(void)
 {
-	return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 / (AT91X40_MASTER_CLOCK / 128));
+	return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 /
+		(AT91X40_MASTER_CLOCK / 128)) * 1000;
 }
 
 static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id)
@@ -64,6 +65,8 @@ void __init at91x40_timer_init(void)
 {
 	unsigned int v;
 
+	arch_gettimeoffset = at91x40_gettimeoffset;
+
 	at91_tc_write(AT91_TC_BCR, 0);
 	v = at91_tc_read(AT91_TC_BMR);
 	v = (v & ~AT91_TC_TC1XC1S) | AT91_TC_TC1XC1S_NONE;
@@ -82,6 +85,5 @@ void __init at91x40_timer_init(void)
 
 struct sys_timer at91x40_timer = {
 	.init	= at91x40_timer_init,
-	.offset	= at91x40_gettimeoffset,
 };
 

arch/arm/mach-ebsa110/core.c

@@ -158,7 +158,7 @@ static void __init ebsa110_init_early(void)
  * interrupt, then the PIT counter will roll over (ie, be negative).
  * This actually works out to be convenient.
  */
-static unsigned long ebsa110_gettimeoffset(void)
+static u32 ebsa110_gettimeoffset(void)
 {
 	unsigned long offset, count;
 
@@ -181,7 +181,7 @@ static unsigned long ebsa110_gettimeoffset(void)
 	 */
 	offset = offset * (1000000 / HZ) / COUNT;
 
-	return offset;
+	return offset * 1000;
 }
 
 static irqreturn_t
@@ -215,6 +215,8 @@ static struct irqaction ebsa110_timer_irq = {
  */
 static void __init ebsa110_timer_init(void)
 {
+	arch_gettimeoffset = ebsa110_gettimeoffset;
+
 	/*
 	 * Timer 1, mode 2, LSB/MSB
 	 */
@@ -227,7 +229,6 @@ static void __init ebsa110_timer_init(void)
 
 static struct sys_timer ebsa110_timer = {
 	.init		= ebsa110_timer_init,
-	.offset		= ebsa110_gettimeoffset,
 };
 
 static struct plat_serial8250_port serial_platform_data[] = {

arch/arm/mach-ep93xx/core.c

@@ -140,11 +140,29 @@ static struct irqaction ep93xx_timer_irq = {
 	.handler	= ep93xx_timer_interrupt,
 };
 
+static u32 ep93xx_gettimeoffset(void)
+{
+	int offset;
+
+	offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time;
+
+	/*
+	 * Timer 4 is based on a 983.04 kHz reference clock,
+	 * so dividing by 983040 gives the fraction of a second,
+	 * so dividing by 0.983040 converts to uS.
+	 * Refactor the calculation to avoid overflow.
+	 * Finally, multiply by 1000 to give nS.
+	 */
+	return (offset + (53 * offset / 3072)) * 1000;
+}
+
 static void __init ep93xx_timer_init(void)
 {
 	u32 tmode = EP93XX_TIMER123_CONTROL_MODE |
 		    EP93XX_TIMER123_CONTROL_CLKSEL;
 
+	arch_gettimeoffset = ep93xx_gettimeoffset;
+
 	/* Enable periodic HZ timer.  */
 	__raw_writel(tmode, EP93XX_TIMER1_CONTROL);
 	__raw_writel(TIMER1_RELOAD, EP93XX_TIMER1_LOAD);
@@ -158,19 +176,8 @@ static void __init ep93xx_timer_init(void)
 	setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq);
 }
 
-static unsigned long ep93xx_gettimeoffset(void)
-{
-	int offset;
-
-	offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time;
-
-	/* Calculate (1000000 / 983040) * offset.  */
-	return offset + (53 * offset / 3072);
-}
-
 struct sys_timer ep93xx_timer = {
 	.init		= ep93xx_timer_init,
-	.offset		= ep93xx_gettimeoffset,
 };
 
 

arch/arm/mach-h720x/common.c

@@ -42,12 +42,12 @@ void __init arch_dma_init(dma_t *dma)
 }
 
 /*
- * Return usecs since last timer reload
+ * Return nsecs since last timer reload
  * (timercount * (usecs perjiffie)) / (ticks per jiffie)
  */
-unsigned long h720x_gettimeoffset(void)
+u32 h720x_gettimeoffset(void)
 {
-	return (CPU_REG (TIMER_VIRT, TM0_COUNT) * tick_usec) / LATCH;
+	return ((CPU_REG(TIMER_VIRT, TM0_COUNT) * tick_usec) / LATCH) * 1000;
 }
 
 /*

arch/arm/mach-h720x/common.h

@@ -13,7 +13,7 @@
  *
  */
 
-extern unsigned long h720x_gettimeoffset(void);
+extern u32 h720x_gettimeoffset(void);
 extern void __init h720x_init_irq(void);
 extern void __init h720x_map_io(void);
 extern void h720x_restart(char, const char *);

arch/arm/mach-h720x/cpu-h7201.c

@@ -46,6 +46,8 @@ static struct irqaction h7201_timer_irq = {
  */
 void __init h7201_init_time(void)
 {
+	arch_gettimeoffset = h720x_gettimeoffset;
+
 	CPU_REG (TIMER_VIRT, TM0_PERIOD) = LATCH;
 	CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_RESET;
 	CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_REPEAT | TM_START;
@@ -56,5 +58,4 @@ void __init h7201_init_time(void)
 
 struct sys_timer h7201_timer = {
 	.init		= h7201_init_time,
-	.offset		= h720x_gettimeoffset,
 };

arch/arm/mach-h720x/cpu-h7202.c

@@ -180,6 +180,8 @@ static struct irqaction h7202_timer_irq = {
  */
 void __init h7202_init_time(void)
 {
+	arch_gettimeoffset = h720x_gettimeoffset;
+
 	CPU_REG (TIMER_VIRT, TM0_PERIOD) = LATCH;
 	CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_RESET;
 	CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_REPEAT | TM_START;
@@ -190,7 +192,6 @@ void __init h7202_init_time(void)
 
 struct sys_timer h7202_timer = {
 	.init		= h7202_init_time,
-	.offset		= h720x_gettimeoffset,
 };
 
 void __init h7202_init_irq (void)

arch/arm/mach-rpc/time.c

@@ -24,7 +24,7 @@
 
 #include <asm/mach/time.h>
 
-unsigned long ioc_timer_gettimeoffset(void)
+static u32 ioc_timer_gettimeoffset(void)
 {
 	unsigned int count1, count2, status;
 	long offset;
@@ -56,7 +56,7 @@ unsigned long ioc_timer_gettimeoffset(void)
 	}
 
 	offset = (LATCH - offset) * (tick_nsec / 1000);
-	return (offset + LATCH/2) / LATCH;
+	return ((offset + LATCH/2) / LATCH) * 1000;
 }
 
 void __init ioctime_init(void)
@@ -84,12 +84,12 @@ static struct irqaction ioc_timer_irq = {
  */
 static void __init ioc_timer_init(void)
 {
+	arch_gettimeoffset = ioc_timer_gettimeoffset;
 	ioctime_init();
 	setup_irq(IRQ_TIMER0, &ioc_timer_irq);
 }
 
 struct sys_timer ioc_timer = {
 	.init		= ioc_timer_init,
-	.offset		= ioc_timer_gettimeoffset,
 };
 

arch/arm/plat-samsung/time.c

@@ -95,7 +95,7 @@ static inline unsigned long timer_ticks_to_usec(unsigned long ticks)
  * IRQs are disabled before entering here from do_gettimeofday()
  */
 
-static unsigned long s3c2410_gettimeoffset (void)
+static u32 s3c2410_gettimeoffset(void)
 {
 	unsigned long tdone;
 	unsigned long tval;
@@ -120,7 +120,7 @@ static unsigned long s3c2410_gettimeoffset (void)
 			tdone += timer_startval;
 	}
 
-	return timer_ticks_to_usec(tdone);
+	return timer_ticks_to_usec(tdone) * 1000;
 }
 
 
@@ -273,6 +273,8 @@ static void __init s3c2410_timer_resources(void)
 
 static void __init s3c2410_timer_init(void)
 {
+	arch_gettimeoffset = s3c2410_gettimeoffset;
+
 	s3c2410_timer_resources();
 	s3c2410_timer_setup();
 	setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
@@ -280,6 +282,5 @@ static void __init s3c2410_timer_init(void)
 
 struct sys_timer s3c24xx_timer = {
 	.init		= s3c2410_timer_init,
-	.offset		= s3c2410_gettimeoffset,
 	.resume		= s3c2410_timer_setup
 };