IB/mlx5: Add port counter support for Receive WQs

Counters weren't updated due to Receive WQs' traffic since the
counter-id was not associated with the RQ.

Added support for associating the q-counter-id with the Receive WQ.
The attachment is done only when changing WQ's state from RESET to
READY in modify-WQ command.

FW support is required for the above, without this support
Receive WQ counters will not count.
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

drivers/infiniband/hw/mlx5/qp.c

@@ -2429,7 +2429,7 @@ static int modify_raw_packet_qp_rq(struct mlx5_ib_dev *dev,
 	if (raw_qp_param->set_mask & MLX5_RAW_QP_MOD_SET_RQ_Q_CTR_ID) {
 		if (MLX5_CAP_GEN(dev->mdev, modify_rq_counter_set_id)) {
 			MLX5_SET64(modify_rq_in, in, modify_bitmask,
-				   MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_MODIFY_RQ_COUNTER_SET_ID);
+				   MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_RQ_COUNTER_SET_ID);
 			MLX5_SET(rqc, rqc, counter_set_id, raw_qp_param->rq_q_ctr_id);
 		} else
 			pr_info_once("%s: RAW PACKET QP counters are not supported on current FW\n",
@@ -4910,6 +4910,16 @@ int mlx5_ib_modify_wq(struct ib_wq *wq, struct ib_wq_attr *wq_attr,
 	MLX5_SET(modify_rq_in, in, rq_state, curr_wq_state);
 	MLX5_SET(rqc, rqc, state, wq_state);
 
+	if (curr_wq_state == IB_WQS_RESET && wq_state == IB_WQS_RDY) {
+		if (MLX5_CAP_GEN(dev->mdev, modify_rq_counter_set_id)) {
+			MLX5_SET64(modify_rq_in, in, modify_bitmask,
+				   MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_RQ_COUNTER_SET_ID);
+			MLX5_SET(rqc, rqc, counter_set_id, dev->port->q_cnts.set_id);
+		} else
+			pr_info_once("%s: Receive WQ counters are not supported on current FW\n",
+				     dev->ib_dev.name);
+	}
+
 	err = mlx5_core_modify_rq(dev->mdev, rwq->core_qp.qpn, in, inlen);
 	kvfree(in);
 	if (!err)

include/linux/mlx5/mlx5_ifc.h

@@ -4937,7 +4937,7 @@ struct mlx5_ifc_modify_rq_out_bits {
 
 enum {
 	MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_VSD = 1ULL << 1,
-	MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_MODIFY_RQ_COUNTER_SET_ID = 1ULL << 3,
+	MLX5_MODIFY_RQ_IN_MODIFY_BITMASK_RQ_COUNTER_SET_ID = 1ULL << 3,
 };
 
 struct mlx5_ifc_modify_rq_in_bits {