提交 236b87c2 编写于 作者: T Tilman Schmidt 提交者: David S. Miller

gigaset: ifdef cleanup

Remove unnecessary #ifdef-s and #if-0-ed code sections.
Signed-off-by: NTilman Schmidt <tilman@imap.cc>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 c8770dca
......@@ -17,8 +17,6 @@
#include <linux/crc-ccitt.h>
#include <linux/bitrev.h>
//#define GIG_M10x_STUFF_VOICE_DATA
/* check if byte must be stuffed/escaped
* I'm not sure which data should be encoded.
* Therefore I will go the hard way and decode every value
......@@ -147,19 +145,17 @@ static inline int hdlc_loop(unsigned char c, unsigned char *src, int numbytes,
}
byte_stuff:
c ^= PPP_TRANS;
#ifdef CONFIG_GIGASET_DEBUG
if (unlikely(!muststuff(c)))
gig_dbg(DEBUG_HDLC, "byte stuffed: 0x%02x", c);
#endif
} else if (unlikely(c == PPP_FLAG)) {
if (unlikely(inputstate & INS_skip_frame)) {
if (!(inputstate & INS_have_data)) { /* 7E 7E */
#ifdef CONFIG_GIGASET_DEBUG
if (!(inputstate & INS_have_data)) { /* 7E 7E */
++bcs->emptycount;
#endif
} else
gig_dbg(DEBUG_HDLC,
"7e----------------------------");
#endif
/* end of frame */
error = 1;
......@@ -226,11 +222,9 @@ static inline int hdlc_loop(unsigned char c, unsigned char *src, int numbytes,
}
break;
#ifdef CONFIG_GIGASET_DEBUG
} else if (unlikely(muststuff(c))) {
/* Should not happen. Possible after ZDLE=1<CR><LF>. */
gig_dbg(DEBUG_HDLC, "not byte stuffed: 0x%02x", c);
#endif
}
/* add character */
......@@ -394,20 +388,16 @@ void gigaset_m10x_input(struct inbuf_t *inbuf)
inbuf->inputstate &= ~INS_DLE_char;
switch (c) {
case 'X': /*begin of command*/
#ifdef CONFIG_GIGASET_DEBUG
if (inbuf->inputstate & INS_command)
dev_err(cs->dev,
dev_warn(cs->dev,
"received <DLE> 'X' in command mode\n");
#endif
inbuf->inputstate |=
INS_command | INS_DLE_command;
break;
case '.': /*end of command*/
#ifdef CONFIG_GIGASET_DEBUG
if (!(inbuf->inputstate & INS_command))
dev_err(cs->dev,
dev_warn(cs->dev,
"received <DLE> '.' in hdlc mode\n");
#endif
inbuf->inputstate &= cs->dle ?
~(INS_DLE_command|INS_command)
: ~INS_DLE_command;
......
......@@ -203,15 +203,6 @@ struct reply_t gigaset_tab_nocid_m10x[]= /* with dle mode */
{EV_TIMEOUT, 120,121, -1, 0, 0, {ACT_FAILVER, ACT_INIT}},
{RSP_ERROR, 120,121, -1, 0, 0, {ACT_FAILVER, ACT_INIT}},
{RSP_OK, 121,121, -1, 0, 0, {ACT_GOTVER, ACT_INIT}},
#if 0
{EV_TIMEOUT, 120,121, -1, 130, 5, {ACT_FAILVER}, "^SGCI=1\r"},
{RSP_ERROR, 120,121, -1, 130, 5, {ACT_FAILVER}, "^SGCI=1\r"},
{RSP_OK, 121,121, -1, 130, 5, {ACT_GOTVER}, "^SGCI=1\r"},
{RSP_OK, 130,130, -1, 0, 0, {ACT_INIT}},
{RSP_ERROR, 130,130, -1, 0, 0, {ACT_FAILINIT}},
{EV_TIMEOUT, 130,130, -1, 0, 0, {ACT_FAILINIT}},
#endif
/* leave dle mode */
{RSP_INIT, 0, 0,SEQ_DLE0, 201, 5, {0}, "^SDLE=0\r"},
......@@ -260,10 +251,6 @@ struct reply_t gigaset_tab_nocid_m10x[]= /* with dle mode */
{RSP_INIT, 0, 0,SEQ_NOCID, 0, 0, {ACT_ABORTCID}},
/* reset */
#if 0
{RSP_INIT, 0, 0,SEQ_SHUTDOWN, 503, 5, {0}, "^SGCI=0\r"},
{RSP_OK, 503,503, -1, 504, 5, {0}, "Z\r"},
#endif
{RSP_INIT, 0, 0,SEQ_SHUTDOWN, 504, 5, {0}, "Z\r"},
{RSP_OK, 504,504, -1, 0, 0, {ACT_SDOWN}},
{RSP_ERROR, 501,599, -1, 0, 0, {ACT_FAILSDOWN}},
......@@ -391,24 +378,6 @@ struct reply_t gigaset_tab_cid_m10x[] = /* for M10x */
};
#if 0
static struct reply_t tab_nocid[]= /* no dle mode */ //FIXME
{
/* resp_code, min_ConState, max_ConState, parameter, new_ConState, timeout, action, command */
{RSP_ANY, -1, -1, -1, -1,-1, ACT_WARN, NULL},
{RSP_LAST,0,0,0,0,0,0}
};
static struct reply_t tab_cid[] = /* no dle mode */ //FIXME
{
/* resp_code, min_ConState, max_ConState, parameter, new_ConState, timeout, action, command */
{RSP_ANY, -1, -1, -1, -1,-1, ACT_WARN, NULL},
{RSP_LAST,0,0,0,0,0,0}
};
#endif
static const struct resp_type_t resp_type[] =
{
/*{"", RSP_EMPTY, RT_NOTHING},*/
......@@ -665,13 +634,8 @@ void gigaset_handle_modem_response(struct cardstate *cs)
dev_err(cs->dev, "out of memory\n");
++curarg;
}
#ifdef CONFIG_GIGASET_DEBUG
if (!event->ptr)
gig_dbg(DEBUG_CMD, "string==NULL");
else
gig_dbg(DEBUG_CMD, "string==%s",
(char *) event->ptr);
#endif
gig_dbg(DEBUG_CMD, "string==%s",
event->ptr ? (char *) event->ptr : "NULL");
break;
case RT_ZCAU:
event->parameter = -1;
......@@ -697,9 +661,7 @@ void gigaset_handle_modem_response(struct cardstate *cs)
++curarg;
} else
event->parameter = -1;
#ifdef CONFIG_GIGASET_DEBUG
gig_dbg(DEBUG_CMD, "parameter==%d", event->parameter);
#endif
break;
}
......
......@@ -143,9 +143,6 @@ static const struct tty_operations if_ops = {
.set_termios = if_set_termios,
.throttle = if_throttle,
.unthrottle = if_unthrottle,
#if 0
.break_ctl = serial_break,
#endif
.tiocmget = if_tiocmget,
.tiocmset = if_tiocmset,
};
......@@ -565,29 +562,6 @@ static void if_set_termios(struct tty_struct *tty, struct ktermios *old)
cs->ops->set_line_ctrl(cs, cflag);
#if 0
//FIXME this hangs M101 [ts 2005-03-09]
//FIXME do we need this?
/*
* Set flow control: well, I do not really now how to handle DTR/RTS.
* Just do what we have seen with SniffUSB on Win98.
*/
/* Drop DTR/RTS if no flow control otherwise assert */
gig_dbg(DEBUG_IF, "%u: control_state %x",
cs->minor_index, control_state);
new_state = control_state;
if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS))
new_state |= TIOCM_DTR | TIOCM_RTS;
else
new_state &= ~(TIOCM_DTR | TIOCM_RTS);
if (new_state != control_state) {
gig_dbg(DEBUG_IF, "%u: new_state %x",
cs->minor_index, new_state);
gigaset_set_modem_ctrl(cs, control_state, new_state);
control_state = new_state;
}
#endif
/* save off the modified port settings */
cs->control_state = control_state;
......
......@@ -88,11 +88,9 @@ static inline int isowbuf_startwrite(struct isowbuf_t *iwb)
__func__);
return 0;
}
#ifdef CONFIG_GIGASET_DEBUG
gig_dbg(DEBUG_ISO,
"%s: acquired iso write semaphore, data[write]=%02x, nbits=%d",
__func__, iwb->data[iwb->write], iwb->wbits);
#endif
return 1;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册