提交 22ad3838 编写于 作者: G Giuseppe Cavallaro 提交者: David S. Miller

stmmac: do not perform zero-copy for rx frames

This patch is to allow this driver to copy tiny frames during the reception
process. This is giving more stability while stressing the driver on STi
embedded systems.
Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NAlexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 8ecd80a5
......@@ -74,6 +74,7 @@ struct stmmac_priv {
unsigned int cur_rx;
unsigned int dirty_rx;
unsigned int dma_buf_sz;
unsigned int rx_copybreak;
u32 rx_riwt;
int hwts_rx_en;
dma_addr_t *rx_skbuff_dma;
......
......@@ -781,6 +781,43 @@ static int stmmac_get_ts_info(struct net_device *dev,
return ethtool_op_get_ts_info(dev, info);
}
static int stmmac_get_tunable(struct net_device *dev,
const struct ethtool_tunable *tuna, void *data)
{
struct stmmac_priv *priv = netdev_priv(dev);
int ret = 0;
switch (tuna->id) {
case ETHTOOL_RX_COPYBREAK:
*(u32 *)data = priv->rx_copybreak;
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static int stmmac_set_tunable(struct net_device *dev,
const struct ethtool_tunable *tuna,
const void *data)
{
struct stmmac_priv *priv = netdev_priv(dev);
int ret = 0;
switch (tuna->id) {
case ETHTOOL_RX_COPYBREAK:
priv->rx_copybreak = *(u32 *)data;
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static const struct ethtool_ops stmmac_ethtool_ops = {
.begin = stmmac_check_if_running,
.get_drvinfo = stmmac_ethtool_getdrvinfo,
......@@ -803,6 +840,8 @@ static const struct ethtool_ops stmmac_ethtool_ops = {
.get_ts_info = stmmac_get_ts_info,
.get_coalesce = stmmac_get_coalesce,
.set_coalesce = stmmac_set_coalesce,
.get_tunable = stmmac_get_tunable,
.set_tunable = stmmac_set_tunable,
};
void stmmac_set_ethtool_ops(struct net_device *netdev)
......
......@@ -91,6 +91,8 @@ static int buf_sz = DEFAULT_BUFSIZE;
module_param(buf_sz, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(buf_sz, "DMA buffer size");
#define STMMAC_RX_COPYBREAK 256
static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
NETIF_MSG_LINK | NETIF_MSG_IFUP |
NETIF_MSG_IFDOWN | NETIF_MSG_TIMER);
......@@ -1808,6 +1810,7 @@ static int stmmac_open(struct net_device *dev)
priv->xstats.threshold = tc;
priv->dma_buf_sz = STMMAC_ALIGN(buf_sz);
priv->rx_copybreak = STMMAC_RX_COPYBREAK;
ret = alloc_dma_desc_resources(priv);
if (ret < 0) {
......@@ -2159,8 +2162,7 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv)
struct sk_buff *skb;
skb = netdev_alloc_skb_ip_align(priv->dev, bfsize);
if (unlikely(skb == NULL))
if (unlikely(!skb))
break;
priv->rx_skbuff[entry] = skb;
......@@ -2282,23 +2284,52 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit)
pr_debug("\tframe size %d, COE: %d\n",
frame_len, status);
}
skb = priv->rx_skbuff[entry];
if (unlikely(!skb)) {
pr_err("%s: Inconsistent Rx descriptor chain\n",
priv->dev->name);
priv->dev->stats.rx_dropped++;
break;
if (unlikely(frame_len < priv->rx_copybreak)) {
skb = netdev_alloc_skb_ip_align(priv->dev,
frame_len);
if (unlikely(!skb)) {
if (net_ratelimit())
dev_warn(priv->device,
"packet dropped\n");
priv->dev->stats.rx_dropped++;
break;
}
dma_sync_single_for_cpu(priv->device,
priv->rx_skbuff_dma
[entry], frame_len,
DMA_FROM_DEVICE);
skb_copy_to_linear_data(skb,
priv->
rx_skbuff[entry]->data,
frame_len);
skb_put(skb, frame_len);
dma_sync_single_for_device(priv->device,
priv->rx_skbuff_dma
[entry], frame_len,
DMA_FROM_DEVICE);
} else {
skb = priv->rx_skbuff[entry];
if (unlikely(!skb)) {
pr_err("%s: Inconsistent Rx chain\n",
priv->dev->name);
priv->dev->stats.rx_dropped++;
break;
}
prefetch(skb->data - NET_IP_ALIGN);
priv->rx_skbuff[entry] = NULL;
skb_put(skb, frame_len);
dma_unmap_single(priv->device,
priv->rx_skbuff_dma[entry],
priv->dma_buf_sz,
DMA_FROM_DEVICE);
}
prefetch(skb->data - NET_IP_ALIGN);
priv->rx_skbuff[entry] = NULL;
stmmac_get_rx_hwtstamp(priv, entry, skb);
skb_put(skb, frame_len);
dma_unmap_single(priv->device,
priv->rx_skbuff_dma[entry],
priv->dma_buf_sz, DMA_FROM_DEVICE);
if (netif_msg_pktdata(priv)) {
pr_debug("frame received (%dbytes)", frame_len);
print_pkt(skb->data, frame_len);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册