提交 22309c3e 编写于 作者: T Takashi Iwai 提交者: Jaroslav Kysela

[ALSA] Added model for Uniwill laptop with ALC861

Added a new model 'uniwill-m31' for Uniwill laptops with ALC861
codec chip.  The patch is taken from ALSA bug#2035, and modifeid.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>
上级 f24e9f58
...@@ -827,6 +827,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. ...@@ -827,6 +827,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
3stack-dig 3-jack with SPDIF I/O 3stack-dig 3-jack with SPDIF I/O
6stack-dig 6-jack with SPDIF I/O 6stack-dig 6-jack with SPDIF I/O
3stack-660 3-jack (for ALC660) 3stack-660 3-jack (for ALC660)
uniwill-m31 Uniwill M31 laptop
auto auto-config reading BIOS (default) auto auto-config reading BIOS (default)
CMI9880 CMI9880
......
...@@ -90,6 +90,7 @@ enum { ...@@ -90,6 +90,7 @@ enum {
ALC660_3ST, ALC660_3ST,
ALC861_3ST_DIG, ALC861_3ST_DIG,
ALC861_6ST_DIG, ALC861_6ST_DIG,
ALC861_UNIWILL_M31,
ALC861_AUTO, ALC861_AUTO,
ALC861_MODEL_LAST, ALC861_MODEL_LAST,
}; };
...@@ -6021,6 +6022,23 @@ static struct hda_channel_mode alc861_threestack_modes[2] = { ...@@ -6021,6 +6022,23 @@ static struct hda_channel_mode alc861_threestack_modes[2] = {
{ 2, alc861_threestack_ch2_init }, { 2, alc861_threestack_ch2_init },
{ 6, alc861_threestack_ch6_init }, { 6, alc861_threestack_ch6_init },
}; };
/* Set mic1 as input and unmute the mixer */
static struct hda_verb alc861_uniwill_m31_ch2_init[] = {
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
{ 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8)) }, /*mic*/
{ } /* end */
};
/* Set mic1 as output and mute mixer */
static struct hda_verb alc861_uniwill_m31_ch4_init[] = {
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
{ 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8)) }, /*mic*/
{ } /* end */
};
static struct hda_channel_mode alc861_uniwill_m31_modes[2] = {
{ 2, alc861_uniwill_m31_ch2_init },
{ 4, alc861_uniwill_m31_ch4_init },
};
/* patch-ALC861 */ /* patch-ALC861 */
...@@ -6099,6 +6117,47 @@ static struct snd_kcontrol_new alc861_3ST_mixer[] = { ...@@ -6099,6 +6117,47 @@ static struct snd_kcontrol_new alc861_3ST_mixer[] = {
}, },
{ } /* end */ { } /* end */
}; };
static struct snd_kcontrol_new alc861_uniwill_m31_mixer[] = {
/* output mixer control */
HDA_CODEC_MUTE("Front Playback Switch", 0x03, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Surround Playback Switch", 0x06, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x05, 1, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x05, 2, 0x0, HDA_OUTPUT),
/*HDA_CODEC_MUTE("Side Playback Switch", 0x04, 0x0, HDA_OUTPUT), */
/* Input mixer control */
/* HDA_CODEC_VOLUME("Input Playback Volume", 0x15, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Input Playback Switch", 0x15, 0x0, HDA_OUTPUT), */
HDA_CODEC_VOLUME("CD Playback Volume", 0x15, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("CD Playback Switch", 0x15, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Line Playback Volume", 0x15, 0x02, HDA_INPUT),
HDA_CODEC_MUTE("Line Playback Switch", 0x15, 0x02, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x15, 0x01, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x15, 0x01, HDA_INPUT),
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_INPUT),
/* Capture mixer control */
HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Capture Source",
.count = 1,
.info = alc_mux_enum_info,
.get = alc_mux_enum_get,
.put = alc_mux_enum_put,
},
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Channel Mode",
.info = alc_ch_mode_info,
.get = alc_ch_mode_get,
.put = alc_ch_mode_put,
.private_value = ARRAY_SIZE(alc861_uniwill_m31_modes),
},
{ } /* end */
};
/* /*
* generic initialization of ADC, input mixers and output mixers * generic initialization of ADC, input mixers and output mixers
...@@ -6227,6 +6286,67 @@ static struct hda_verb alc861_threestack_init_verbs[] = { ...@@ -6227,6 +6286,67 @@ static struct hda_verb alc861_threestack_init_verbs[] = {
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
{ } { }
}; };
static struct hda_verb alc861_uniwill_m31_init_verbs[] = {
/*
* Unmute ADC0 and set the default input to mic-in
*/
/* port-A for surround (rear panel) */
{ 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
/* port-B for mic-in (rear panel) with vref */
{ 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
/* port-C for line-in (rear panel) */
{ 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
/* port-D for Front */
{ 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
{ 0x0b, AC_VERB_SET_CONNECT_SEL, 0x00 },
/* port-E for HP out (front panel) */
{ 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 }, // this has to be set to VREF80
/* route front PCM to HP */
{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x01 },
/* port-F for mic-in (front panel) with vref */
{ 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
/* port-G for CLFE (rear panel) */
{ 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
/* port-H for side (rear panel) */
{ 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00 },
/* CD-in */
{ 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
/* route front mic to ADC1*/
{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* Unmute DAC0~3 & spdif out*/
{0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x06, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
/* Unmute Mixer 14 (mic) 1c (Line in)*/
{0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
/* Unmute Stereo Mixer 15 */
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
{0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c }, //Output 0~12 step
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, // hp used DAC 3 (Front)
{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
{ }
};
/* /*
* generic initialization of ADC, input mixers and output mixers * generic initialization of ADC, input mixers and output mixers
*/ */
...@@ -6561,6 +6681,9 @@ static struct hda_board_config alc861_cfg_tbl[] = { ...@@ -6561,6 +6681,9 @@ static struct hda_board_config alc861_cfg_tbl[] = {
.config = ALC660_3ST }, .config = ALC660_3ST },
{ .modelname = "3stack-dig", .config = ALC861_3ST_DIG }, { .modelname = "3stack-dig", .config = ALC861_3ST_DIG },
{ .modelname = "6stack-dig", .config = ALC861_6ST_DIG }, { .modelname = "6stack-dig", .config = ALC861_6ST_DIG },
{ .modelname = "uniwill-m31", .config = ALC861_UNIWILL_M31},
{ .pci_subvendor = 0x1584, .pci_subdevice = 0x9072,
.config = ALC861_UNIWILL_M31 },
{ .modelname = "auto", .config = ALC861_AUTO }, { .modelname = "auto", .config = ALC861_AUTO },
{} {}
}; };
...@@ -6615,6 +6738,20 @@ static struct alc_config_preset alc861_presets[] = { ...@@ -6615,6 +6738,20 @@ static struct alc_config_preset alc861_presets[] = {
.adc_nids = alc861_adc_nids, .adc_nids = alc861_adc_nids,
.input_mux = &alc861_capture_source, .input_mux = &alc861_capture_source,
}, },
[ALC861_UNIWILL_M31] = {
.mixers = { alc861_uniwill_m31_mixer },
.init_verbs = { alc861_uniwill_m31_init_verbs },
.num_dacs = ARRAY_SIZE(alc861_dac_nids),
.dac_nids = alc861_dac_nids,
.dig_out_nid = ALC861_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc861_uniwill_m31_modes),
.channel_mode = alc861_uniwill_m31_modes,
.need_dac_fix = 1,
.num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
.adc_nids = alc861_adc_nids,
.input_mux = &alc861_capture_source,
},
}; };
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册