Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 163
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 21e89c0c 编写于 作者: A Al Viro
浏览文件
操作

Merge branch 'fscache' of... 

Merge branch 'fscache' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into for-linus
上级 b911a6bd 91c7fbbf
展开全部 隐藏空白更改
内联 并排
Showing with 4827 addition and 3460 deletion
Documentation/filesystems/caching/backend-api.txt
浏览文件 @ 21e89c0c
......@@ -308,6 +308,18 @@ performed on the denizens of the cache. These are held in a structure of type:
obtained by calling object->cookie->def->get_aux()/get_attr().
(*) Invalidate data object [mandatory]:
int (*invalidate_object)(struct fscache_operation *op)
This is called to invalidate a data object (as pointed to by op->object).
All the data stored for this object should be discarded and an
attr_changed operation should be performed. The caller will follow up
with an object update operation.
fscache_op_complete() must be called on op before returning.
(*) Discard object [mandatory]:
void (*drop_object)(struct fscache_object *object)
......@@ -419,7 +431,10 @@ performed on the denizens of the cache. These are held in a structure of type:
If an I/O error occurs, fscache_io_error() should be called and -ENOBUFS
returned if possible or fscache_end_io() called with a suitable error
code..
code.
fscache_put_retrieval() should be called after a page or pages are dealt
with. This will complete the operation when all pages are dealt with.
(*) Request pages be read from cache [mandatory]:
......@@ -526,6 +541,27 @@ FS-Cache provides some utilities that a cache backend may make use of:
error value should be 0 if successful and an error otherwise.
(*) Record that one or more pages being retrieved or allocated have been dealt
with:
void fscache_retrieval_complete(struct fscache_retrieval *op,
int n_pages);
This is called to record the fact that one or more pages have been dealt
with and are no longer the concern of this operation. When the number of
pages remaining in the operation reaches 0, the operation will be
completed.
(*) Record operation completion:
void fscache_op_complete(struct fscache_operation *op);
This is called to record the completion of an operation. This deducts
this operation from the parent object's run state, potentially permitting
one or more pending operations to start running.
(*) Set highest store limit:
void fscache_set_store_limit(struct fscache_object *object,
......
Documentation/filesystems/caching/netfs-api.txt
浏览文件 @ 21e89c0c
......@@ -35,8 +35,9 @@ This document contains the following sections:
(12) Index and data file update
(13) Miscellaneous cookie operations
(14) Cookie unregistration
(15) Index and data file invalidation
(16) FS-Cache specific page flags.
(15) Index invalidation
(16) Data file invalidation
(17) FS-Cache specific page flags.
=============================
......@@ -767,13 +768,42 @@ the cookies for "child" indices, objects and pages have been relinquished
first.
================================
INDEX AND DATA FILE INVALIDATION
================================
==================
INDEX INVALIDATION
==================
There is no direct way to invalidate an index subtree. To do this, the caller
should relinquish and retire the cookie they have, and then acquire a new one.
======================
DATA FILE INVALIDATION
======================
Sometimes it will be necessary to invalidate an object that contains data.
Typically this will be necessary when the server tells the netfs of a foreign
change - at which point the netfs has to throw away all the state it had for an
inode and reload from the server.
To indicate that a cache object should be invalidated, the following function
can be called:
void fscache_invalidate(struct fscache_cookie *cookie);
This can be called with spinlocks held as it defers the work to a thread pool.
All extant storage, retrieval and attribute change ops at this point are
cancelled and discarded. Some future operations will be rejected until the
cache has had a chance to insert a barrier in the operations queue. After
that, operations will be queued again behind the invalidation operation.
The invalidation operation will perform an attribute change operation and an
auxiliary data update operation as it is very likely these will have changed.
Using the following function, the netfs can wait for the invalidation operation
to have reached a point at which it can start submitting ordinary operations
once again:
There is no direct way to invalidate an index subtree or a data file. To do
this, the caller should relinquish and retire the cookie they have, and then
acquire a new one.
void fscache_wait_on_invalidate(struct fscache_cookie *cookie);
===========================
......
Documentation/filesystems/caching/object.txt
浏览文件 @ 21e89c0c
......@@ -216,7 +216,14 @@ servicing netfs requests:
The normal running state. In this state, requests the netfs makes will be
passed on to the cache.
(6) State FSCACHE_OBJECT_UPDATING.
(6) State FSCACHE_OBJECT_INVALIDATING.
The object is undergoing invalidation. When the state comes here, it
discards all pending read, write and attribute change operations as it is
going to clear out the cache entirely and reinitialise it. It will then
continue to the FSCACHE_OBJECT_UPDATING state.
(7) State FSCACHE_OBJECT_UPDATING.
The state machine comes here to update the object in the cache from the
netfs's records. This involves updating the auxiliary data that is used
......@@ -225,13 +232,13 @@ servicing netfs requests:
And there are terminal states in which an object cleans itself up, deallocates
memory and potentially deletes stuff from disk:
(7) State FSCACHE_OBJECT_LC_DYING.
(8) State FSCACHE_OBJECT_LC_DYING.
The object comes here if it is dying because of a lookup or creation
error. This would be due to a disk error or system error of some sort.
Temporary data is cleaned up, and the parent is released.
(8) State FSCACHE_OBJECT_DYING.
(9) State FSCACHE_OBJECT_DYING.
The object comes here if it is dying due to an error, because its parent
cookie has been relinquished by the netfs or because the cache is being
......@@ -241,27 +248,27 @@ memory and potentially deletes stuff from disk:
can destroy themselves. This object waits for all its children to go away
before advancing to the next state.
(9) State FSCACHE_OBJECT_ABORT_INIT.
(10) State FSCACHE_OBJECT_ABORT_INIT.
The object comes to this state if it was waiting on its parent in
FSCACHE_OBJECT_INIT, but its parent died. The object will destroy itself
so that the parent may proceed from the FSCACHE_OBJECT_DYING state.
(10) State FSCACHE_OBJECT_RELEASING.
(11) State FSCACHE_OBJECT_RECYCLING.
(11) State FSCACHE_OBJECT_RELEASING.
(12) State FSCACHE_OBJECT_RECYCLING.
The object comes to one of these two states when dying once it is rid of
all its children, if it is dying because the netfs relinquished its
cookie. In the first state, the cached data is expected to persist, and
in the second it will be deleted.
(12) State FSCACHE_OBJECT_WITHDRAWING.
(13) State FSCACHE_OBJECT_WITHDRAWING.
The object transits to this state if the cache decides it wants to
withdraw the object from service, perhaps to make space, but also due to
error or just because the whole cache is being withdrawn.
(13) State FSCACHE_OBJECT_DEAD.
(14) State FSCACHE_OBJECT_DEAD.
The object transits to this state when the in-memory object record is
ready to be deleted. The object processor shouldn't ever see an object in
......
Documentation/filesystems/caching/operations.txt
浏览文件 @ 21e89c0c
......@@ -174,7 +174,7 @@ Operations are used through the following procedure:
necessary (the object might have died whilst the thread was waiting).
When it has finished doing its processing, it should call
fscache_put_operation() on it.
fscache_op_complete() and fscache_put_operation() on it.
(4) The operation holds an effective lock upon the object, preventing other
exclusive ops conflicting until it is released. The operation can be
......
Documentation/hwmon/it87
浏览文件 @ 21e89c0c
......@@ -209,3 +209,13 @@ doesn't use CPU cycles.
Trip points must be set properly before switching to automatic fan speed
control mode. The driver will perform basic integrity checks before
actually switching to automatic control mode.
Temperature offset attributes
-----------------------------
The driver supports temp[1-3]_offset sysfs attributes to adjust the reported
temperature for thermal diodes or diode-connected thermal transistors.
If a temperature sensor is configured for thermistors, the attribute values
are ignored. If the thermal sensor type is Intel PECI, the temperature offset
must be programmed to the critical CPU temperature.
arch/arm/boot/dts/Makefile
浏览文件 @ 21e89c0c
......@@ -107,6 +107,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
omap3-evm.dtb \
omap3-tobi.dtb \
omap4-panda.dtb \
omap4-panda-a4.dtb \
omap4-panda-es.dtb \
omap4-var-som.dtb \
omap4-sdp.dtb \
......@@ -131,8 +132,8 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
spear320-evb.dtb \
spear320-hmi.dtb
dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun4i-cubieboard.dtb \
sun5i-olinuxino.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \
sun5i-a13-olinuxino.dtb
dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra20-medcom-wide.dtb \
tegra20-paz00.dtb \
......
arch/arm/boot/dts/at91sam9263.dtsi
浏览文件 @ 21e89c0c
......@@ -368,14 +368,14 @@
compatible = "atmel,at91rm9200-ssc";
reg = <0xfff98000 0x4000>;
interrupts = <16 4 5>;
status = "disable";
status = "disabled";
};
ssc1: ssc@fff9c000 {
compatible = "atmel,at91rm9200-ssc";
reg = <0xfff9c000 0x4000>;
interrupts = <17 4 5>;
status = "disable";
status = "disabled";
};
macb0: ethernet@fffbc000 {
......
arch/arm/boot/dts/at91sam9g45.dtsi
浏览文件 @ 21e89c0c
......@@ -425,14 +425,14 @@
compatible = "atmel,at91sam9g45-ssc";
reg = <0xfff9c000 0x4000>;
interrupts = <16 4 5>;
status = "disable";
status = "disabled";
};
ssc1: ssc@fffa0000 {
compatible = "atmel,at91sam9g45-ssc";
reg = <0xfffa0000 0x4000>;
interrupts = <17 4 5>;
status = "disable";
status = "disabled";
};
adc0: adc@fffb0000 {
......
arch/arm/boot/dts/at91sam9x5.dtsi
浏览文件 @ 21e89c0c
......@@ -92,7 +92,7 @@
compatible = "atmel,at91sam9g45-ssc";
reg = <0xf0010000 0x4000>;
interrupts = <28 4 5>;
status = "disable";
status = "disabled";
};
tcb0: timer@f8008000 {
......
arch/arm/boot/dts/imx27-3ds.dts
浏览文件 @ 21e89c0c
......@@ -21,17 +21,17 @@
};
soc {
aipi@10000000 { /* aipi */
aipi@10000000 { /* aipi1 */
uart1: serial@1000a000 {
fsl,uart-has-rtscts;
status = "okay";
};
};
fec@1002b000 {
aipi@10020000 { /* aipi2 */
ethernet@1002b000 {
status = "okay";
};
};
};
};
arch/arm/boot/dts/imx27-phytec-phycore.dts
浏览文件 @ 21e89c0c
......@@ -21,8 +21,7 @@
};
soc {
aipi@10000000 { /* aipi */
aipi@10000000 { /* aipi1 */
serial@1000a000 {
fsl,uart-has-rtscts;
status = "okay";
......@@ -38,10 +37,6 @@
status = "okay";
};
ethernet@1002b000 {
status = "okay";
};
i2c@1001d000 {
clock-frequency = <400000>;
status = "okay";
......@@ -60,6 +55,12 @@
};
};
};
aipi@10020000 { /* aipi2 */
ethernet@1002b000 {
status = "okay";
};
};
};
nor_flash@c0000000 {
......
arch/arm/boot/dts/imx27.dtsi
浏览文件 @ 21e89c0c
......@@ -55,7 +55,7 @@
compatible = "fsl,aipi-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x10000000 0x10000000>;
reg = <0x10000000 0x20000>;
ranges;
wdog: wdog@10002000 {
......@@ -211,6 +211,15 @@
status = "disabled";
};
};
aipi@10020000 { /* AIPI2 */
compatible = "fsl,aipi-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x10020000 0x20000>;
ranges;
fec: ethernet@1002b000 {
compatible = "fsl,imx27-fec";
reg = <0x1002b000 0x4000>;
......
arch/arm/boot/dts/omap2420-h4.dts
浏览文件 @ 21e89c0c
......@@ -15,6 +15,6 @@
memory {
device_type = "memory";
reg = <0x80000000 0x84000000>; /* 64 MB */
reg = <0x80000000 0x4000000>; /* 64 MB */
};
};
arch/arm/boot/dts/sun4i-cubieboard.dts
浏览文件 @ 21e89c0c
......@@ -11,11 +11,11 @@
*/
/dts-v1/;
/include/ "sun4i.dtsi"
/include/ "sun4i-a10.dtsi"
/ {
model = "Cubietech Cubieboard";
compatible = "cubietech,cubieboard", "allwinner,sun4i";
compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10";
aliases {
serial0 = &uart0;
......
arch/arm/boot/dts/sun5i-olinuxino.dts
浏览文件 @ 21e89c0c
......@@ -12,11 +12,11 @@
*/
/dts-v1/;
/include/ "sun5i.dtsi"
/include/ "sun5i-a13.dtsi"
/ {
model = "Olimex A13-Olinuxino";
compatible = "olimex,a13-olinuxino", "allwinner,sun5i";
compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13";
chosen {
bootargs = "earlyprintk console=ttyS0,115200";
......
arch/arm/mach-davinci/board-da850-evm.c
浏览文件 @ 21e89c0c
......@@ -41,6 +41,7 @@
#include <mach/cp_intc.h>
#include <mach/da8xx.h>
#include <mach/mux.h>
#include <mach/sram.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
......
arch/arm/mach-ep93xx/include/mach/uncompress.h
浏览文件 @ 21e89c0c
......@@ -47,13 +47,9 @@ static void __raw_writel(unsigned int value, unsigned int ptr)
static inline void putc(int c)
{
int i;
for (i = 0; i < 1000; i++) {
/* Transmit fifo not full? */
if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF))
break;
}
/* Transmit fifo not full? */
while (__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF)
;
__raw_writeb(c, PHYS_UART_DATA);
}
......
arch/arm/mach-exynos/common.h
浏览文件 @ 21e89c0c
......@@ -25,7 +25,7 @@ void exynos_init_late(void);
#ifdef CONFIG_PM_GENERIC_DOMAINS
int exynos_pm_late_initcall(void);
#else
static int exynos_pm_late_initcall(void) { return 0; }
static inline int exynos_pm_late_initcall(void) { return 0; }
#endif
#ifdef CONFIG_ARCH_EXYNOS4
......
arch/arm/mach-imx/clk-imx51-imx53.c
浏览文件 @ 21e89c0c
......@@ -319,6 +319,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
unsigned long rate_ckih1, unsigned long rate_ckih2)
{
int i;
u32 val;
struct device_node *np;
clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX51_DPLL1_BASE);
......@@ -390,6 +391,21 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
imx_print_silicon_rev("i.MX51", mx51_revision());
clk_disable_unprepare(clk[iim_gate]);
/*
* Reference Manual says: Functionality of CCDR[18] and CLPCR[23] is no
* longer supported. Set to one for better power saving.
*
* The effect of not setting these bits is that MIPI clocks can't be
* enabled without the IPU clock being enabled aswell.
*/
val = readl(MXC_CCM_CCDR);
val |= 1 << 18;
writel(val, MXC_CCM_CCDR);
val = readl(MXC_CCM_CLPCR);
val |= 1 << 23;
writel(val, MXC_CCM_CLPCR);
return 0;
}
......
arch/arm/plat-mxc/devices/platform-mx2-emma.c → arch/arm/mach-imx/devices/platform-mx2-emma.c
浏览文件 @ 21e89c0c
......@@ -6,8 +6,8 @@
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <mach/hardware.h>
#include <mach/devices-common.h>
#include "../hardware.h"
#include "devices-common.h"
#define imx_mx2_emmaprp_data_entry_single(soc) \
{ \
......
arch/arm/mach-omap2/Kconfig
浏览文件 @ 21e89c0c
......@@ -26,6 +26,8 @@ config SOC_HAS_OMAP2_SDRC
config SOC_HAS_REALTIME_COUNTER
bool "Real time free running counter"
depends on SOC_OMAP5
default y
config ARCH_OMAP2
bool "TI OMAP2"
......@@ -79,7 +81,6 @@ config SOC_OMAP5
select ARM_GIC
select CPU_V7
select HAVE_SMP
select SOC_HAS_REALTIME_COUNTER
select COMMON_CLK
comment "OMAP Core Type"
......
arch/arm/mach-omap2/board-3430sdp.c
浏览文件 @ 21e89c0c
......@@ -157,6 +157,7 @@ static struct omap_dss_device sdp3430_lcd_device = {
static struct tfp410_platform_data dvi_panel = {
.power_down_gpio = -1,
.i2c_bus_num = -1,
};
static struct omap_dss_device sdp3430_dvi_device = {
......
arch/arm/mach-omap2/board-am3517evm.c
浏览文件 @ 21e89c0c
......@@ -208,6 +208,7 @@ static struct omap_dss_device am3517_evm_tv_device = {
static struct tfp410_platform_data dvi_panel = {
.power_down_gpio = -1,
.i2c_bus_num = -1,
};
static struct omap_dss_device am3517_evm_dvi_device = {
......
arch/arm/mach-omap2/board-cm-t35.c
浏览文件 @ 21e89c0c
......@@ -241,6 +241,7 @@ static struct omap_dss_device cm_t35_lcd_device = {
static struct tfp410_platform_data dvi_panel = {
.power_down_gpio = CM_T35_DVI_EN_GPIO,
.i2c_bus_num = -1,
};
static struct omap_dss_device cm_t35_dvi_device = {
......
arch/arm/mach-omap2/board-devkit8000.c
浏览文件 @ 21e89c0c
......@@ -141,6 +141,7 @@ static struct omap_dss_device devkit8000_lcd_device = {
static struct tfp410_platform_data dvi_panel = {
.power_down_gpio = -1,
.i2c_bus_num = 1,
};
static struct omap_dss_device devkit8000_dvi_device = {
......
arch/arm/mach-omap2/board-h4.c
浏览文件 @ 21e89c0c
......@@ -27,14 +27,12 @@
#include <linux/io.h>
#include <linux/input/matrix_keypad.h>
#include <linux/mfd/menelaus.h>
#include <linux/omap-dma.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <linux/omap-dma.h>
#include <plat/debug-devices.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
......@@ -42,11 +40,9 @@
#include "mux.h"
#include "control.h"
#include "gpmc.h"
#include "gpmc-smc91x.h"
#define H4_FLASH_CS 0
#define H4_SMC91X_CS 1
#define H4_ETHR_GPIO_IRQ 92
#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
static const uint32_t board_matrix_keys[] = {
......@@ -250,71 +246,31 @@ static u32 is_gpmc_muxed(void)
return 0;
}
static inline void __init h4_init_debug(void)
{
int eth_cs;
unsigned long cs_mem_base;
unsigned int muxed, rate;
struct clk *gpmc_fck;
eth_cs = H4_SMC91X_CS;
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */
if (IS_ERR(gpmc_fck)) {
WARN_ON(1);
return;
}
clk_prepare_enable(gpmc_fck);
rate = clk_get_rate(gpmc_fck);
clk_disable_unprepare(gpmc_fck);
clk_put(gpmc_fck);
static struct omap_smc91x_platform_data board_smc91x_data = {
.cs = 1,
.gpio_irq = 92,
.flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_LOWLEVEL,
};
static void __init board_smc91x_init(void)
{
if (is_gpmc_muxed())
muxed = 0x200;
else
muxed = 0;
/* Make sure CS1 timings are correct */
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1,
0x00011000 | muxed);
if (rate >= 160000000) {
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
} else if (rate >= 130000000) {
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
} else {/* rate = 100000000 */
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
}
if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
goto out;
}
board_smc91x_data.flags |= GPMC_MUX_ADD_DATA;
udelay(100);
omap_mux_init_gpio(board_smc91x_data.gpio_irq, OMAP_PIN_INPUT);
gpmc_smc91x_init(&board_smc91x_data);
}
omap_mux_init_gpio(92, 0);
if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0)
gpmc_cs_free(eth_cs);
#else
out:
clk_disable_unprepare(gpmc_fck);
clk_put(gpmc_fck);
static inline void board_smc91x_init(void)
{
}
#endif
static void __init h4_init_flash(void)
{
unsigned long base;
......@@ -371,6 +327,7 @@ static void __init omap_h4_init(void)
omap_serial_init();
omap_sdrc_init(NULL, NULL);
h4_init_flash();
board_smc91x_init();
omap_display_init(&h4_dss_data);
}
......
arch/arm/mach-omap2/board-omap3evm.c
浏览文件 @ 21e89c0c
......@@ -240,6 +240,7 @@ static struct omap_dss_device omap3_evm_tv_device = {
static struct tfp410_platform_data dvi_panel = {
.power_down_gpio = OMAP3EVM_DVI_PANEL_EN_GPIO,
.i2c_bus_num = -1,
};
static struct omap_dss_device omap3_evm_dvi_device = {
......
arch/arm/mach-omap2/board-omap3stalker.c
浏览文件 @ 21e89c0c
......@@ -118,6 +118,7 @@ static struct omap_dss_device omap3_stalker_tv_device = {
static struct tfp410_platform_data dvi_panel = {
.power_down_gpio = DSS_ENABLE_GPIO,
.i2c_bus_num = -1,
};
static struct omap_dss_device omap3_stalker_dvi_device = {
......
arch/arm/mach-omap2/cclock44xx_data.c
浏览文件 @ 21e89c0c
......@@ -40,6 +40,14 @@
#define OMAP4430_MODULEMODE_HWCTRL_SHIFT 0
#define OMAP4430_MODULEMODE_SWCTRL_SHIFT 1
/*
* OMAP4 ABE DPLL default frequency. In OMAP4460 TRM version V, section
* "3.6.3.2.3 CM1_ABE Clock Generator" states that the "DPLL_ABE_X2_CLK
* must be set to 196.608 MHz" and hence, the DPLL locked frequency is
* half of this value.
*/
#define OMAP4_DPLL_ABE_DEFFREQ 98304000
/* Root clocks */
DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0);
......@@ -124,6 +132,8 @@ static struct dpll_data dpll_abe_dd = {
.enable_mask = OMAP4430_DPLL_EN_MASK,
.autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK,
.idlest_mask = OMAP4430_ST_DPLL_CLK_MASK,
.m4xen_mask = OMAP4430_DPLL_REGM4XEN_MASK,
.lpmode_mask = OMAP4430_DPLL_LPMODE_EN_MASK,
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
......@@ -233,7 +243,7 @@ static struct dpll_data dpll_core_dd = {
static const char *dpll_core_ck_parents[] = {
"sys_clkin_ck",
"sys_clkin_ck", "core_hsd_byp_clk_mux_ck"
};
static struct clk dpll_core_ck;
......@@ -286,9 +296,9 @@ DEFINE_CLK_DIVIDER(div_core_ck, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck, 0x0,
OMAP4430_CM_CLKSEL_CORE, OMAP4430_CLKSEL_CORE_SHIFT,
OMAP4430_CLKSEL_CORE_WIDTH, 0x0, NULL);
DEFINE_CLK_OMAP_HSDIVIDER(div_iva_hs_clk, "dpll_core_m5x2_ck",
&dpll_core_m5x2_ck, 0x0, OMAP4430_CM_BYPCLK_DPLL_IVA,
OMAP4430_CLKSEL_0_1_MASK);
DEFINE_CLK_DIVIDER(div_iva_hs_clk, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck,
0x0, OMAP4430_CM_BYPCLK_DPLL_IVA, OMAP4430_CLKSEL_0_1_SHIFT,
OMAP4430_CLKSEL_0_1_WIDTH, CLK_DIVIDER_POWER_OF_TWO, NULL);
DEFINE_CLK_DIVIDER(div_mpu_hs_clk, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck,
0x0, OMAP4430_CM_BYPCLK_DPLL_MPU, OMAP4430_CLKSEL_0_1_SHIFT,
......@@ -363,8 +373,21 @@ static struct dpll_data dpll_iva_dd = {
.min_divider = 1,
};
static const char *dpll_iva_ck_parents[] = {
"sys_clkin_ck", "iva_hsd_byp_clk_mux_ck"
};
static struct clk dpll_iva_ck;
static const struct clk_ops dpll_ck_ops = {
.enable = &omap3_noncore_dpll_enable,
.disable = &omap3_noncore_dpll_disable,
.recalc_rate = &omap3_dpll_recalc,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
.get_parent = &omap2_init_dpll_parent,
};
static struct clk_hw_omap dpll_iva_ck_hw = {
.hw = {
.clk = &dpll_iva_ck,
......@@ -373,7 +396,7 @@ static struct clk_hw_omap dpll_iva_ck_hw = {
.ops = &clkhwops_omap3_dpll,
};
DEFINE_STRUCT_CLK(dpll_iva_ck, dpll_core_ck_parents, dpll_abe_ck_ops);
DEFINE_STRUCT_CLK(dpll_iva_ck, dpll_iva_ck_parents, dpll_ck_ops);
static const char *dpll_iva_x2_ck_parents[] = {
"dpll_iva_ck",
......@@ -416,6 +439,10 @@ static struct dpll_data dpll_mpu_dd = {
.min_divider = 1,
};
static const char *dpll_mpu_ck_parents[] = {
"sys_clkin_ck", "div_mpu_hs_clk"
};
static struct clk dpll_mpu_ck;
static struct clk_hw_omap dpll_mpu_ck_hw = {
......@@ -426,7 +453,7 @@ static struct clk_hw_omap dpll_mpu_ck_hw = {
.ops = &clkhwops_omap3_dpll,
};
DEFINE_STRUCT_CLK(dpll_mpu_ck, dpll_core_ck_parents, dpll_abe_ck_ops);
DEFINE_STRUCT_CLK(dpll_mpu_ck, dpll_mpu_ck_parents, dpll_ck_ops);
DEFINE_CLK_FIXED_FACTOR(mpu_periphclk, "dpll_mpu_ck", &dpll_mpu_ck, 0x0, 1, 2);
......@@ -464,6 +491,9 @@ static struct dpll_data dpll_per_dd = {
.min_divider = 1,
};
static const char *dpll_per_ck_parents[] = {
"sys_clkin_ck", "per_hsd_byp_clk_mux_ck"
};
static struct clk dpll_per_ck;
......@@ -475,7 +505,7 @@ static struct clk_hw_omap dpll_per_ck_hw = {
.ops = &clkhwops_omap3_dpll,
};
DEFINE_STRUCT_CLK(dpll_per_ck, dpll_core_ck_parents, dpll_abe_ck_ops);
DEFINE_STRUCT_CLK(dpll_per_ck, dpll_per_ck_parents, dpll_ck_ops);
DEFINE_CLK_DIVIDER(dpll_per_m2_ck, "dpll_per_ck", &dpll_per_ck, 0x0,
OMAP4430_CM_DIV_M2_DPLL_PER, OMAP4430_DPLL_CLKOUT_DIV_SHIFT,
......@@ -559,6 +589,10 @@ static struct dpll_data dpll_usb_dd = {
.min_divider = 1,
};
static const char *dpll_usb_ck_parents[] = {
"sys_clkin_ck", "usb_hs_clk_div_ck"
};
static struct clk dpll_usb_ck;
static struct clk_hw_omap dpll_usb_ck_hw = {
......@@ -569,7 +603,7 @@ static struct clk_hw_omap dpll_usb_ck_hw = {
.ops = &clkhwops_omap3_dpll,
};
DEFINE_STRUCT_CLK(dpll_usb_ck, dpll_core_ck_parents, dpll_abe_ck_ops);
DEFINE_STRUCT_CLK(dpll_usb_ck, dpll_usb_ck_parents, dpll_ck_ops);
static const char *dpll_usb_clkdcoldo_ck_parents[] = {
"dpll_usb_ck",
......@@ -696,9 +730,13 @@ DEFINE_CLK_DIVIDER(syc_clk_div_ck, "sys_clkin_ck", &sys_clkin_ck, 0x0,
OMAP4430_CM_ABE_DSS_SYS_CLKSEL, OMAP4430_CLKSEL_0_0_SHIFT,
OMAP4430_CLKSEL_0_0_WIDTH, 0x0, NULL);
static const char *dbgclk_mux_ck_parents[] = {
"sys_clkin_ck"
};
static struct clk dbgclk_mux_ck;
DEFINE_STRUCT_CLK_HW_OMAP(dbgclk_mux_ck, NULL);
DEFINE_STRUCT_CLK(dbgclk_mux_ck, dpll_core_ck_parents,
DEFINE_STRUCT_CLK(dbgclk_mux_ck, dbgclk_mux_ck_parents,
dpll_usb_clkdcoldo_ck_ops);
/* Leaf clocks controlled by modules */
......@@ -1935,10 +1973,10 @@ static struct omap_clk omap44xx_clks[] = {
CLK("4803e000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
CLK("48086000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
CLK("48088000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X),
CLK("49038000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
CLK("4903a000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
CLK("4903c000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
CLK("4903e000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
CLK("40138000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
CLK("4013a000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
CLK("4013c000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
CLK("4013e000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
CLK(NULL, "cpufreq_ck", &dpll_mpu_ck, CK_443X),
};
......@@ -1955,6 +1993,7 @@ int __init omap4xxx_clk_init(void)
{
u32 cpu_clkflg;
struct omap_clk *c;
int rc;
if (cpu_is_omap443x()) {
cpu_mask = RATE_IN_4430;
......@@ -1983,5 +2022,18 @@ int __init omap4xxx_clk_init(void)
omap2_clk_enable_init_clocks(enable_init_clks,
ARRAY_SIZE(enable_init_clks));
/*
* On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
* state when turning the ABE clock domain. Workaround this by
* locking the ABE DPLL on boot.
*/
if (cpu_is_omap446x()) {
rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
if (!rc)
rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
if (rc)
pr_err("%s: failed to configure ABE DPLL!\n", __func__);
}
return 0;
}
arch/arm/mach-omap2/clock.h
浏览文件 @ 21e89c0c
......@@ -195,6 +195,10 @@ struct clksel {
* @enable_mask: mask of the DPLL mode bitfield in @control_reg
* @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
* @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
* @last_rounded_m4xen: cache of the last M4X result of
* omap4_dpll_regm4xen_round_rate()
* @last_rounded_lpmode: cache of the last lpmode result of
* omap4_dpll_lpmode_recalc()
* @max_multiplier: maximum valid non-bypass multiplier value (actual)
* @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
* @min_divider: minimum valid non-bypass divider value (actual)
......@@ -205,6 +209,8 @@ struct clksel {
* @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
* @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
* @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
* @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg
* @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg
* @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
* @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
* @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
......@@ -233,6 +239,8 @@ struct dpll_data {
u32 enable_mask;
unsigned long last_rounded_rate;
u16 last_rounded_m;
u8 last_rounded_m4xen;
u8 last_rounded_lpmode;
u16 max_multiplier;
u8 last_rounded_n;
u8 min_divider;
......@@ -245,6 +253,8 @@ struct dpll_data {
u32 idlest_mask;
u32 dco_mask;
u32 sddiv_mask;
u32 lpmode_mask;
u32 m4xen_mask;
u8 auto_recal_bit;
u8 recal_en_bit;
u8 recal_st_bit;
......
arch/arm/mach-omap2/clockdomain.c
浏览文件 @ 21e89c0c
......@@ -998,7 +998,8 @@ int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
spin_lock_irqsave(&clkdm->lock, flags);
/* corner case: disabling unused clocks */
if (__clk_get_enable_count(clk) == 0)
if ((__clk_get_enable_count(clk) == 0) &&
(atomic_read(&clkdm->usecount) == 0))
goto ccd_exit;
if (atomic_read(&clkdm->usecount) == 0) {
......
arch/arm/mach-omap2/common.c
浏览文件 @ 21e89c0c
......@@ -16,8 +16,6 @@
#include <linux/init.h>
#include <linux/platform_data/dsp-omap.h>
#include <plat/vram.h>
#include "common.h"
#include "omap-secure.h"
......@@ -32,7 +30,6 @@ int __weak omap_secure_ram_reserve_memblock(void)
void __init omap_reserve(void)
{
omap_vram_reserve_sdram_memblock();
omap_dsp_reserve_sdram_memblock();
omap_secure_ram_reserve_memblock();
omap_barrier_reserve_memblock();
......
arch/arm/mach-omap2/cpuidle34xx.c
浏览文件 @ 21e89c0c
......@@ -40,6 +40,8 @@ struct omap3_idle_statedata {
u32 core_state;
};
static struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd;
static struct omap3_idle_statedata omap3_idle_data[] = {
{
.mpu_state = PWRDM_POWER_ON,
......@@ -71,7 +73,7 @@ static struct omap3_idle_statedata omap3_idle_data[] = {
},
};
static struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd;
/* Private functions */
static int __omap3_enter_idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
......@@ -260,11 +262,11 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
return ret;
}
DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
static DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
struct cpuidle_driver omap3_idle_driver = {
.name = "omap3_idle",
.owner = THIS_MODULE,
static struct cpuidle_driver omap3_idle_driver = {
.name = "omap3_idle",
.owner = THIS_MODULE,
.states = {
{
.enter = omap3_enter_idle_bm,
......@@ -327,6 +329,8 @@ struct cpuidle_driver omap3_idle_driver = {
.safe_state_index = 0,
};
/* Public functions */
/**
* omap3_idle_init - Init routine for OMAP3 idle
*
......
arch/arm/mach-omap2/cpuidle44xx.c
浏览文件 @ 21e89c0c
......@@ -54,6 +54,8 @@ static struct clockdomain *cpu_clkdm[NR_CPUS];
static atomic_t abort_barrier;
static bool cpu_done[NR_CPUS];
/* Private functions */
/**
* omap4_enter_idle_coupled_[simple/coupled] - OMAP4 cpuidle entry functions
* @dev: cpuidle device
......@@ -161,9 +163,19 @@ static int omap4_enter_idle_coupled(struct cpuidle_device *dev,
return index;
}
DEFINE_PER_CPU(struct cpuidle_device, omap4_idle_dev);
/*
* For each cpu, setup the broadcast timer because local timers
* stops for the states above C1.
*/
static void omap_setup_broadcast_timer(void *arg)
{
int cpu = smp_processor_id();
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu);
}
static DEFINE_PER_CPU(struct cpuidle_device, omap4_idle_dev);
struct cpuidle_driver omap4_idle_driver = {
static struct cpuidle_driver omap4_idle_driver = {
.name = "omap4_idle",
.owner = THIS_MODULE,
.en_core_tk_irqen = 1,
......@@ -178,7 +190,7 @@ struct cpuidle_driver omap4_idle_driver = {
.desc = "MPUSS ON"
},
{
/* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */
/* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */
.exit_latency = 328 + 440,
.target_residency = 960,
.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED,
......@@ -200,15 +212,7 @@ struct cpuidle_driver omap4_idle_driver = {
.safe_state_index = 0,
};
/*
* For each cpu, setup the broadcast timer because local timers
* stops for the states above C1.
*/
static void omap_setup_broadcast_timer(void *arg)
{
int cpu = smp_processor_id();
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu);
}
/* Public functions */
/**
* omap4_idle_init - Init routine for OMAP4 idle
......
arch/arm/mach-omap2/dpll3xxx.c
浏览文件 @ 21e89c0c
......@@ -291,16 +291,13 @@ static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n)
/*
* _omap3_noncore_dpll_program - set non-core DPLL M,N values directly
* @clk: struct clk * of DPLL to set
* @m: DPLL multiplier to set
* @n: DPLL divider to set
* @freqsel: FREQSEL value to set
* @clk: struct clk * of DPLL to set
* @freqsel: FREQSEL value to set
*
* Program the DPLL with the supplied M, N values, and wait for the DPLL to
* lock.. Returns -EINVAL upon error, or 0 upon success.
* Program the DPLL with the last M, N values calculated, and wait for
* the DPLL to lock. Returns -EINVAL upon error, or 0 upon success.
*/
static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 m, u8 n,
u16 freqsel)
static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
{
struct dpll_data *dd = clk->dpll_data;
u8 dco, sd_div;
......@@ -323,23 +320,45 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 m, u8 n,
/* Set DPLL multiplier, divider */
v = __raw_readl(dd->mult_div1_reg);
v &= ~(dd->mult_mask | dd->div1_mask);
v |= m << __ffs(dd->mult_mask);
v |= (n - 1) << __ffs(dd->div1_mask);
v |= dd->last_rounded_m << __ffs(dd->mult_mask);
v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask);
/* Configure dco and sd_div for dplls that have these fields */
if (dd->dco_mask) {
_lookup_dco(clk, &dco, m, n);
_lookup_dco(clk, &dco, dd->last_rounded_m, dd->last_rounded_n);
v &= ~(dd->dco_mask);
v |= dco << __ffs(dd->dco_mask);
}
if (dd->sddiv_mask) {
_lookup_sddiv(clk, &sd_div, m, n);
_lookup_sddiv(clk, &sd_div, dd->last_rounded_m,
dd->last_rounded_n);
v &= ~(dd->sddiv_mask);
v |= sd_div << __ffs(dd->sddiv_mask);
}
__raw_writel(v, dd->mult_div1_reg);
/* Set 4X multiplier and low-power mode */
if (dd->m4xen_mask || dd->lpmode_mask) {
v = __raw_readl(dd->control_reg);
if (dd->m4xen_mask) {
if (dd->last_rounded_m4xen)
v |= dd->m4xen_mask;
else
v &= ~dd->m4xen_mask;
}
if (dd->lpmode_mask) {
if (dd->last_rounded_lpmode)
v |= dd->lpmode_mask;
else
v &= ~dd->lpmode_mask;
}
__raw_writel(v, dd->control_reg);
}
/* We let the clock framework set the other output dividers later */
/* REVISIT: Set ramp-up delay? */
......@@ -492,8 +511,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
pr_debug("%s: %s: set rate: locking rate to %lu.\n",
__func__, __clk_get_name(hw->clk), rate);
ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
dd->last_rounded_n, freqsel);
ret = omap3_noncore_dpll_program(clk, freqsel);
if (!ret)
new_parent = dd->clk_ref;
}
......
arch/arm/mach-omap2/dpll44xx.c
浏览文件 @ 21e89c0c
......@@ -20,6 +20,15 @@
#include "clock44xx.h"
#include "cm-regbits-44xx.h"
/*
* Maximum DPLL input frequency (FINT) and output frequency (FOUT) that
* can supported when using the DPLL low-power mode. Frequencies are
* defined in OMAP4430/60 Public TRM section 3.6.3.3.2 "Enable Control,
* Status, and Low-Power Operation Mode".
*/
#define OMAP4_DPLL_LP_FINT_MAX 1000000
#define OMAP4_DPLL_LP_FOUT_MAX 100000000
/* Supported only on OMAP4 */
int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk)
{
......@@ -81,6 +90,31 @@ const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = {
.deny_idle = omap4_dpllmx_deny_gatectrl,
};
/**
* omap4_dpll_lpmode_recalc - compute DPLL low-power setting
* @dd: pointer to the dpll data structure
*
* Calculates if low-power mode can be enabled based upon the last
* multiplier and divider values calculated. If low-power mode can be
* enabled, then the bit to enable low-power mode is stored in the
* last_rounded_lpmode variable. This implementation is based upon the
* criteria for enabling low-power mode as described in the OMAP4430/60
* Public TRM section 3.6.3.3.2 "Enable Control, Status, and Low-Power
* Operation Mode".
*/
static void omap4_dpll_lpmode_recalc(struct dpll_data *dd)
{
long fint, fout;
fint = __clk_get_rate(dd->clk_ref) / (dd->last_rounded_n + 1);
fout = fint * dd->last_rounded_m;
if ((fint < OMAP4_DPLL_LP_FINT_MAX) && (fout < OMAP4_DPLL_LP_FOUT_MAX))
dd->last_rounded_lpmode = 1;
else
dd->last_rounded_lpmode = 0;
}
/**
* omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit
* @clk: struct clk * of the DPLL to compute the rate for
......@@ -130,7 +164,6 @@ long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
unsigned long *parent_rate)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
u32 v;
struct dpll_data *dd;
long r;
......@@ -139,18 +172,31 @@ long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
dd = clk->dpll_data;
/* regm4xen adds a multiplier of 4 to DPLL calculations */
v = __raw_readl(dd->control_reg) & OMAP4430_DPLL_REGM4XEN_MASK;
if (v)
target_rate = target_rate / OMAP4430_REGM4XEN_MULT;
dd->last_rounded_m4xen = 0;
/*
* First try to compute the DPLL configuration for
* target rate without using the 4X multiplier.
*/
r = omap2_dpll_round_rate(hw, target_rate, NULL);
if (r != ~0)
goto out;
/*
* If we did not find a valid DPLL configuration, try again, but
* this time see if using the 4X multiplier can help. Enabling the
* 4X multiplier is equivalent to dividing the target rate by 4.
*/
r = omap2_dpll_round_rate(hw, target_rate / OMAP4430_REGM4XEN_MULT,
NULL);
if (r == ~0)
return r;
if (v)
clk->dpll_data->last_rounded_rate *= OMAP4430_REGM4XEN_MULT;
dd->last_rounded_rate *= OMAP4430_REGM4XEN_MULT;
dd->last_rounded_m4xen = 1;
out:
omap4_dpll_lpmode_recalc(dd);
return clk->dpll_data->last_rounded_rate;
return dd->last_rounded_rate;
}
arch/arm/mach-omap2/i2c.c
浏览文件 @ 21e89c0c
......@@ -22,6 +22,7 @@
#include "soc.h"
#include "omap_hwmod.h"
#include "omap_device.h"
#include "omap-pm.h"
#include "prm.h"
#include "common.h"
......
arch/arm/mach-omap2/mux.c
浏览文件 @ 21e89c0c
......@@ -135,10 +135,7 @@ static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition,
old_mode = omap_mux_read(partition, gpio_mux->reg_offset);
mux_mode = val & ~(OMAP_MUX_NR_MODES - 1);
if (partition->flags & OMAP_MUX_GPIO_IN_MODE3)
mux_mode |= OMAP_MUX_MODE3;
else
mux_mode |= OMAP_MUX_MODE4;
mux_mode |= partition->gpio;
pr_debug("%s: Setting signal %s.gpio%i 0x%04x -> 0x%04x\n", __func__,
gpio_mux->muxnames[0], gpio, old_mode, mux_mode);
omap_mux_write(partition, mux_mode, gpio_mux->reg_offset);
......@@ -800,7 +797,7 @@ int __init omap_mux_late_init(void)
struct omap_mux *m = &e->mux;
u16 mode = omap_mux_read(partition, m->reg_offset);
if (OMAP_MODE_GPIO(mode))
if (OMAP_MODE_GPIO(partition, mode))
continue;
#ifndef CONFIG_DEBUG_FS
......@@ -1065,7 +1062,7 @@ static void __init omap_mux_init_list(struct omap_mux_partition *partition,
}
#else
/* Skip pins that are not muxed as GPIO by bootloader */
if (!OMAP_MODE_GPIO(omap_mux_read(partition,
if (!OMAP_MODE_GPIO(partition, omap_mux_read(partition,
superset->reg_offset))) {
superset++;
continue;
......@@ -1132,6 +1129,7 @@ int __init omap_mux_init(const char *name, u32 flags,
partition->name = name;
partition->flags = flags;
partition->gpio = flags & OMAP_MUX_MODE7;
partition->size = mux_size;
partition->phys = mux_pbase;
partition->base = ioremap(mux_pbase, mux_size);
......
arch/arm/mach-omap2/mux.h
浏览文件 @ 21e89c0c
......@@ -58,7 +58,8 @@
#define OMAP_PIN_OFF_INPUT_PULLDOWN (OMAP_OFF_EN | OMAP_OFF_PULL_EN)
#define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN
#define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4)
#define OMAP_MODE_GPIO(partition, x) (((x) & OMAP_MUX_MODE7) == \
partition->gpio)
#define OMAP_MODE_UART(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0)
/* Flags for omapX_mux_init */
......@@ -79,13 +80,20 @@
/*
* omap_mux_init flags definition:
*
* OMAP_GPIO_MUX_MODE, bits 0-2: gpio muxing mode, same like pad control
* register which includes values from 0-7.
* OMAP_MUX_REG_8BIT: Ensure that access to padconf is done in 8 bits.
* The default value is 16 bits.
* OMAP_MUX_GPIO_IN_MODE3: The GPIO is selected in mode3.
* The default is mode4.
*/
#define OMAP_MUX_REG_8BIT (1 << 0)
#define OMAP_MUX_GPIO_IN_MODE3 (1 << 1)
#define OMAP_MUX_GPIO_IN_MODE0 OMAP_MUX_MODE0
#define OMAP_MUX_GPIO_IN_MODE1 OMAP_MUX_MODE1
#define OMAP_MUX_GPIO_IN_MODE2 OMAP_MUX_MODE2
#define OMAP_MUX_GPIO_IN_MODE3 OMAP_MUX_MODE3
#define OMAP_MUX_GPIO_IN_MODE4 OMAP_MUX_MODE4
#define OMAP_MUX_GPIO_IN_MODE5 OMAP_MUX_MODE5
#define OMAP_MUX_GPIO_IN_MODE6 OMAP_MUX_MODE6
#define OMAP_MUX_GPIO_IN_MODE7 OMAP_MUX_MODE7
#define OMAP_MUX_REG_8BIT (1 << 3)
/**
* struct omap_board_data - board specific device data
......@@ -105,6 +113,7 @@ struct omap_board_data {
* struct mux_partition - contain partition related information
* @name: name of the current partition
* @flags: flags specific to this partition
* @gpio: gpio mux mode
* @phys: physical address
* @size: partition size
* @base: virtual address after ioremap
......@@ -114,6 +123,7 @@ struct omap_board_data {
struct omap_mux_partition {
const char *name;
u32 flags;
u32 gpio;
u32 phys;
u32 size;
void __iomem *base;
......
arch/arm/mach-omap2/mux34xx.c
浏览文件 @ 21e89c0c
......@@ -2053,7 +2053,7 @@ int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags)
return -EINVAL;
}
return omap_mux_init("core", 0,
return omap_mux_init("core", OMAP_MUX_GPIO_IN_MODE4,
OMAP3_CONTROL_PADCONF_MUX_PBASE,
OMAP3_CONTROL_PADCONF_MUX_SIZE,
omap3_muxmodes, package_subset, board_subset,
......
arch/arm/mach-omap2/serial.c
浏览文件 @ 21e89c0c
......@@ -27,8 +27,7 @@
#include <linux/pm_runtime.h>
#include <linux/console.h>
#include <linux/omap-dma.h>
#include <plat/omap-serial.h>
#include <linux/platform_data/serial-omap.h>
#include "common.h"
#include "omap_hwmod.h"
......
arch/arm/mach-omap2/timer.c
浏览文件 @ 21e89c0c
......@@ -190,7 +190,7 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match,
* kernel registering these devices remove them dynamically from the device
* tree on boot.
*/
void __init omap_dmtimer_init(void)
static void __init omap_dmtimer_init(void)
{
struct device_node *np;
......@@ -210,7 +210,7 @@ void __init omap_dmtimer_init(void)
*
* Get the timer errata flags that are specific to the OMAP device being used.
*/
u32 __init omap_dm_timer_get_errata(void)
static u32 __init omap_dm_timer_get_errata(void)
{
if (cpu_is_omap24xx())
return 0;
......@@ -392,7 +392,7 @@ static struct of_device_id omap_counter_match[] __initdata = {
};
/* Setup free-running counter for clocksource */
static int __init omap2_sync32k_clocksource_init(void)
static int __init __maybe_unused omap2_sync32k_clocksource_init(void)
{
int ret;
struct device_node *np = NULL;
......
arch/arm/mach-omap2/usb-host.c
浏览文件 @ 21e89c0c
......@@ -508,6 +508,10 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
if (cpu_is_omap34xx()) {
setup_ehci_io_mux(pdata->port_mode);
setup_ohci_io_mux(pdata->port_mode);
if (omap_rev() <= OMAP3430_REV_ES2_1)
usbhs_data.single_ulpi_bypass = true;
} else if (cpu_is_omap44xx()) {
setup_4430ehci_io_mux(pdata->port_mode);
setup_4430ohci_io_mux(pdata->port_mode);
......
arch/arm/mach-tegra/common.c
浏览文件 @ 21e89c0c
......@@ -104,7 +104,7 @@ static __initdata struct tegra_clk_init_table tegra20_clk_init_table[] = {
static __initdata struct tegra_clk_init_table tegra30_clk_init_table[] = {
/* name parent rate enabled */
{ "clk_m", NULL, 0, true },
{ "pll_p", "clk_m", 408000000, true },
{ "pll_p", "pll_ref", 408000000, true },
{ "pll_p_out1", "pll_p", 9600000, true },
{ "pll_p_out4", "pll_p", 102000000, true },
{ "sclk", "pll_p_out4", 102000000, true },
......
arch/arm/mach-tegra/tegra30_clocks.c
浏览文件 @ 21e89c0c
......@@ -2045,9 +2045,7 @@ struct clk_ops tegra30_periph_clk_ops = {
static int tegra30_dsib_clk_set_parent(struct clk_hw *hw, u8 index)
{
struct clk *d = clk_get_sys(NULL, "pll_d");
/* The DSIB parent selection bit is in PLLD base
register - can not do direct r-m-w, must be
protected by PLLD lock */
/* The DSIB parent selection bit is in PLLD base register */
tegra_clk_cfg_ex(
d, TEGRA_CLK_PLLD_MIPI_MUX_SEL, index);
......
arch/arm/mach-u300/core.c
浏览文件 @ 21e89c0c
......@@ -27,7 +27,6 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/fsmc.h>
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/dma-mapping.h>
#include <linux/platform_data/clk-u300.h>
......@@ -1553,39 +1552,6 @@ static struct pinctrl_map __initdata u300_pinmux_map[] = {
pin_highz_conf),
};
struct u300_mux_hog {
struct device *dev;
struct pinctrl *p;
};
static struct u300_mux_hog u300_mux_hogs[] = {
{
.dev = &uart0_device.dev,
},
{
.dev = &mmcsd_device.dev,
},
};
static int __init u300_pinctrl_fetch(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(u300_mux_hogs); i++) {
struct pinctrl *p;
p = pinctrl_get_select_default(u300_mux_hogs[i].dev);
if (IS_ERR(p)) {
pr_err("u300: could not get pinmux hog for dev %s\n",
dev_name(u300_mux_hogs[i].dev));
continue;
}
u300_mux_hogs[i].p = p;
}
return 0;
}
subsys_initcall(u300_pinctrl_fetch);
/*
* Notice that AMBA devices are initialized before platform devices.
*
......
arch/arm/mach-ux500/devices-db8500.h
浏览文件 @ 21e89c0c
......@@ -8,6 +8,7 @@
#ifndef __DEVICES_DB8500_H
#define __DEVICES_DB8500_H
#include <linux/platform_data/usb-musb-ux500.h>
#include <mach/irqs.h>
#include "devices-common.h"
......
arch/arm/plat-omap/Makefile
浏览文件 @ 21e89c0c
......@@ -11,7 +11,6 @@ obj- :=
# omap_device support (OMAP2+ only at the moment)
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
obj-y += $(i2c-omap-m) $(i2c-omap-y)
......
arch/arm/plat-omap/debug-devices.c 已删除 100644 → 0
浏览文件 @ b911a6bd
/*
* linux/arch/arm/plat-omap/debug-devices.c
*
* Copyright (C) 2005 Nokia Corporation
* Modified from mach-omap2/board-h4.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/smc91x.h>
#include <plat/debug-devices.h>
/* Many OMAP development platforms reuse the same "debug board"; these
* platforms include H2, H3, H4, and Perseus2.
*/
static struct smc91x_platdata smc91x_info = {
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
.leda = RPC_LED_100_10,
.ledb = RPC_LED_TX_RX,
};
static struct resource smc91x_resources[] = {
[0] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = -1,
.dev = {
.platform_data = &smc91x_info,
},
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
static struct resource led_resources[] = {
[0] = {
.flags = IORESOURCE_MEM,
},
};
static struct platform_device led_device = {
.name = "omap_dbg_led",
.id = -1,
.num_resources = ARRAY_SIZE(led_resources),
.resource = led_resources,
};
static struct platform_device *debug_devices[] __initdata = {
&smc91x_device,
&led_device,
/* ps2 kbd + mouse ports */
/* 4 extra uarts */
/* 6 input dip switches */
/* 8 output pins */
};
int __init debug_card_init(u32 addr, unsigned gpio)
{
int status;
smc91x_resources[0].start = addr + 0x300;
smc91x_resources[0].end = addr + 0x30f;
smc91x_resources[1].start = gpio_to_irq(gpio);
smc91x_resources[1].end = gpio_to_irq(gpio);
status = gpio_request(gpio, "SMC91x irq");
if (status < 0) {
printk(KERN_ERR "GPIO%d unavailable for smc91x IRQ\n", gpio);
return status;
}
gpio_direction_input(gpio);
led_resources[0].start = addr;
led_resources[0].end = addr + SZ_4K - 1;
return platform_add_devices(debug_devices, ARRAY_SIZE(debug_devices));
}
arch/arm/plat-omap/include/plat/debug-devices.h 已删除 100644 → 0
浏览文件 @ b911a6bd
/* for TI reference platforms sharing the same debug card */
extern int debug_card_init(u32 addr, unsigned gpio);
arch/cris/include/arch-v10/arch/Kbuild
浏览文件 @ 21e89c0c
header-y += user.h
header-y += svinto.h
header-y += sv_addr_ag.h
header-y += sv_addr.agh
# CRISv10 arch
arch/cris/include/arch-v32/arch/Kbuild
浏览文件 @ 21e89c0c
header-y += user.h
header-y += cryptocop.h
# CRISv32 arch
arch/cris/include/arch-v32/arch/cryptocop.h
浏览文件 @ 21e89c0c
......@@ -2,124 +2,12 @@
* The device /dev/cryptocop is accessible using this driver using
* CRYPTOCOP_MAJOR (254) and minor number 0.
*/
#ifndef CRYPTOCOP_H
#define CRYPTOCOP_H
#include <linux/uio.h>
#define CRYPTOCOP_SESSION_ID_NONE (0)
typedef unsigned long long int cryptocop_session_id;
/* cryptocop ioctls */
#define ETRAXCRYPTOCOP_IOCTYPE (250)
#define CRYPTOCOP_IO_CREATE_SESSION _IOWR(ETRAXCRYPTOCOP_IOCTYPE, 1, struct strcop_session_op)
#define CRYPTOCOP_IO_CLOSE_SESSION _IOW(ETRAXCRYPTOCOP_IOCTYPE, 2, struct strcop_session_op)
#define CRYPTOCOP_IO_PROCESS_OP _IOWR(ETRAXCRYPTOCOP_IOCTYPE, 3, struct strcop_crypto_op)
#define CRYPTOCOP_IO_MAXNR (3)
typedef enum {
cryptocop_cipher_des = 0,
cryptocop_cipher_3des = 1,
cryptocop_cipher_aes = 2,
cryptocop_cipher_m2m = 3, /* mem2mem is essentially a NULL cipher with blocklength=1 */
cryptocop_cipher_none
} cryptocop_cipher_type;
typedef enum {
cryptocop_digest_sha1 = 0,
cryptocop_digest_md5 = 1,
cryptocop_digest_none
} cryptocop_digest_type;
typedef enum {
cryptocop_csum_le = 0,
cryptocop_csum_be = 1,
cryptocop_csum_none
} cryptocop_csum_type;
typedef enum {
cryptocop_cipher_mode_ecb = 0,
cryptocop_cipher_mode_cbc,
cryptocop_cipher_mode_none
} cryptocop_cipher_mode;
typedef enum {
cryptocop_3des_eee = 0,
cryptocop_3des_eed = 1,
cryptocop_3des_ede = 2,
cryptocop_3des_edd = 3,
cryptocop_3des_dee = 4,
cryptocop_3des_ded = 5,
cryptocop_3des_dde = 6,
cryptocop_3des_ddd = 7
} cryptocop_3des_mode;
/* Usermode accessible (ioctl) operations. */
struct strcop_session_op{
cryptocop_session_id ses_id;
cryptocop_cipher_type cipher; /* AES, DES, 3DES, m2m, none */
cryptocop_cipher_mode cmode; /* ECB, CBC, none */
cryptocop_3des_mode des3_mode;
cryptocop_digest_type digest; /* MD5, SHA1, none */
cryptocop_csum_type csum; /* BE, LE, none */
unsigned char *key;
size_t keylen;
};
#define CRYPTOCOP_CSUM_LENGTH (2)
#define CRYPTOCOP_MAX_DIGEST_LENGTH (20) /* SHA-1 20, MD5 16 */
#define CRYPTOCOP_MAX_IV_LENGTH (16) /* (3)DES==8, AES == 16 */
#define CRYPTOCOP_MAX_KEY_LENGTH (32)
struct strcop_crypto_op{
cryptocop_session_id ses_id;
/* Indata. */
unsigned char *indata;
size_t inlen; /* Total indata length. */
/* Cipher configuration. */
unsigned char do_cipher:1;
unsigned char decrypt:1; /* 1 == decrypt, 0 == encrypt */
unsigned char cipher_explicit:1;
size_t cipher_start;
size_t cipher_len;
/* cipher_iv is used if do_cipher and cipher_explicit and the cipher
mode is CBC. The length is controlled by the type of cipher,
e.g. DES/3DES 8 octets and AES 16 octets. */
unsigned char cipher_iv[CRYPTOCOP_MAX_IV_LENGTH];
/* Outdata. */
unsigned char *cipher_outdata;
size_t cipher_outlen;
/* digest configuration. */
unsigned char do_digest:1;
size_t digest_start;
size_t digest_len;
/* Outdata. The actual length is determined by the type of the digest. */
unsigned char digest[CRYPTOCOP_MAX_DIGEST_LENGTH];
/* Checksum configuration. */
unsigned char do_csum:1;
size_t csum_start;
size_t csum_len;
/* Outdata. */
unsigned char csum[CRYPTOCOP_CSUM_LENGTH];
};
#include <uapi/arch-v32/arch/cryptocop.h>
#ifdef __KERNEL__
/********** The API to use from inside the kernel. ************/
#include <arch/hwregs/dma.h>
......@@ -267,6 +155,4 @@ int cryptocop_job_queue_insert_crypto(struct cryptocop_operation *operation);
int cryptocop_job_queue_insert_user_job(struct cryptocop_operation *operation);
#endif /* __KERNEL__ */
#endif /* CRYPTOCOP_H */
arch/cris/include/arch-v32/arch/spinlock.h
浏览文件 @ 21e89c0c
......@@ -118,7 +118,7 @@ static inline int arch_write_trylock(arch_rwlock_t *rw)
ret = 1;
}
arch_spin_unlock(&rw->slock);
return 1;
return ret;
}
#define _raw_read_lock_flags(lock, flags) _raw_read_lock(lock)
......
arch/cris/include/asm/Kbuild
浏览文件 @ 21e89c0c
include include/asm-generic/Kbuild.asm
header-y += arch-v10/
header-y += arch-v32/
header-y += ethernet.h
header-y += etraxgpio.h
header-y += rs485.h
header-y += sync_serial.h
generic-y += clkdev.h
generic-y += exec.h
......
arch/cris/include/asm/ptrace.h
浏览文件 @ 21e89c0c
#ifndef _CRIS_PTRACE_H
#define _CRIS_PTRACE_H
#include <arch/ptrace.h>
#include <uapi/asm/ptrace.h>
#ifdef __KERNEL__
/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
#define PTRACE_GETREGS 12
......@@ -11,6 +10,4 @@
#define profile_pc(regs) instruction_pointer(regs)
#endif /* __KERNEL__ */
#endif /* _CRIS_PTRACE_H */
arch/cris/include/asm/signal.h
浏览文件 @ 21e89c0c
#ifndef _ASM_CRIS_SIGNAL_H
#define _ASM_CRIS_SIGNAL_H
#include <linux/types.h>
#include <uapi/asm/signal.h>
/* Avoid too many header ordering problems. */
struct siginfo;
#ifdef __KERNEL__
/* Most things should be clean enough to redefine this at will, if care
is taken to make libc match. */
......@@ -20,95 +16,6 @@ typedef struct {
unsigned long sig[_NSIG_WORDS];
} sigset_t;
#else
/* Here we must cater to libcs that poke about in kernel headers. */
#define NSIG 32
typedef unsigned long sigset_t;
#endif /* __KERNEL__ */
#define SIGHUP 1
#define SIGINT 2
#define SIGQUIT 3
#define SIGILL 4
#define SIGTRAP 5
#define SIGABRT 6
#define SIGIOT 6
#define SIGBUS 7
#define SIGFPE 8
#define SIGKILL 9
#define SIGUSR1 10
#define SIGSEGV 11
#define SIGUSR2 12
#define SIGPIPE 13
#define SIGALRM 14
#define SIGTERM 15
#define SIGSTKFLT 16
#define SIGCHLD 17
#define SIGCONT 18
#define SIGSTOP 19
#define SIGTSTP 20
#define SIGTTIN 21
#define SIGTTOU 22
#define SIGURG 23
#define SIGXCPU 24
#define SIGXFSZ 25
#define SIGVTALRM 26
#define SIGPROF 27
#define SIGWINCH 28
#define SIGIO 29
#define SIGPOLL SIGIO
/*
#define SIGLOST 29
*/
#define SIGPWR 30
#define SIGSYS 31
#define SIGUNUSED 31
/* These should not be considered constants from userland. */
#define SIGRTMIN 32
#define SIGRTMAX _NSIG
/*
* SA_FLAGS values:
*
* SA_ONSTACK indicates that a registered stack_t will be used.
* SA_RESTART flag to get restarting signals (which were the default long ago)
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
* SA_RESETHAND clears the handler when the signal is delivered.
* SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
* SA_NODEFER prevents the current signal from being masked in the handler.
*
* SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
* Unix names RESETHAND and NODEFER respectively.
*/
#define SA_NOCLDSTOP 0x00000001u
#define SA_NOCLDWAIT 0x00000002u
#define SA_SIGINFO 0x00000004u
#define SA_ONSTACK 0x08000000u
#define SA_RESTART 0x10000000u
#define SA_NODEFER 0x40000000u
#define SA_RESETHAND 0x80000000u
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
#define SA_RESTORER 0x04000000
/*
* sigaltstack controls
*/
#define SS_ONSTACK 1
#define SS_DISABLE 2
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
#include <asm-generic/signal-defs.h>
#ifdef __KERNEL__
struct old_sigaction {
__sighandler_t sa_handler;
old_sigset_t sa_mask;
......@@ -126,32 +33,6 @@ struct sigaction {
struct k_sigaction {
struct sigaction sa;
};
#else
/* Here we must cater to libcs that poke about in kernel headers. */
struct sigaction {
union {
__sighandler_t _sa_handler;
void (*_sa_sigaction)(int, struct siginfo *, void *);
} _u;
sigset_t sa_mask;
unsigned long sa_flags;
void (*sa_restorer)(void);
};
#define sa_handler _u._sa_handler
#define sa_sigaction _u._sa_sigaction
#endif /* __KERNEL__ */
typedef struct sigaltstack {
void *ss_sp;
int ss_flags;
size_t ss_size;
} stack_t;
#ifdef __KERNEL__
#include <asm/sigcontext.h>
#endif /* __KERNEL__ */
#endif
arch/cris/include/asm/swab.h
浏览文件 @ 21e89c0c
#ifndef _CRIS_SWAB_H
#define _CRIS_SWAB_H
#ifdef __KERNEL__
#include <arch/swab.h>
#endif /* __KERNEL__ */
#include <uapi/asm/swab.h>
#endif /* _CRIS_SWAB_H */
arch/cris/include/asm/termios.h
浏览文件 @ 21e89c0c
#ifndef _CRIS_TERMIOS_H
#define _CRIS_TERMIOS_H
#include <asm/termbits.h>
#include <asm/ioctls.h>
#include <asm/rs485.h>
#include <linux/serial.h>
#include <uapi/asm/termios.h>
struct winsize {
unsigned short ws_row;
unsigned short ws_col;
unsigned short ws_xpixel;
unsigned short ws_ypixel;
};
#define NCC 8
struct termio {
unsigned short c_iflag; /* input mode flags */
unsigned short c_oflag; /* output mode flags */
unsigned short c_cflag; /* control mode flags */
unsigned short c_lflag; /* local mode flags */
unsigned char c_line; /* line discipline */
unsigned char c_cc[NCC]; /* control characters */
};
/* modem lines */
#define TIOCM_LE 0x001
#define TIOCM_DTR 0x002
#define TIOCM_RTS 0x004
#define TIOCM_ST 0x008
#define TIOCM_SR 0x010
#define TIOCM_CTS 0x020
#define TIOCM_CAR 0x040
#define TIOCM_RNG 0x080
#define TIOCM_DSR 0x100
#define TIOCM_CD TIOCM_CAR
#define TIOCM_RI TIOCM_RNG
#define TIOCM_OUT1 0x2000
#define TIOCM_OUT2 0x4000
#define TIOCM_LOOP 0x8000
/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
#ifdef __KERNEL__
/* intr=^C quit=^\ erase=del kill=^U
eof=^D vtime=\0 vmin=\1 sxtc=\0
......@@ -87,6 +48,4 @@ struct termio {
#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
#endif /* __KERNEL__ */
#endif /* _CRIS_TERMIOS_H */
arch/cris/include/asm/types.h
浏览文件 @ 21e89c0c
#ifndef _ETRAX_TYPES_H
#define _ETRAX_TYPES_H
#include <asm-generic/int-ll64.h>
#include <uapi/asm/types.h>
/*
* These aren't exported outside the kernel to avoid name space clashes
*/
#ifdef __KERNEL__
#define BITS_PER_LONG 32
#endif /* __KERNEL__ */
#endif
arch/cris/include/asm/unistd.h
浏览文件 @ 21e89c0c
#ifndef _ASM_CRIS_UNISTD_H_
#define _ASM_CRIS_UNISTD_H_
/*
* This file contains the system call numbers, and stub macros for libc.
*/
#define __NR_restart_syscall 0
#define __NR_exit 1
#define __NR_fork 2
#define __NR_read 3
#define __NR_write 4
#define __NR_open 5
#define __NR_close 6
#define __NR_waitpid 7
#define __NR_creat 8
#define __NR_link 9
#define __NR_unlink 10
#define __NR_execve 11
#define __NR_chdir 12
#define __NR_time 13
#define __NR_mknod 14
#define __NR_chmod 15
#define __NR_lchown 16
#define __NR_break 17
#define __NR_oldstat 18
#define __NR_lseek 19
#define __NR_getpid 20
#define __NR_mount 21
#define __NR_umount 22
#define __NR_setuid 23
#define __NR_getuid 24
#define __NR_stime 25
#define __NR_ptrace 26
#define __NR_alarm 27
#define __NR_oldfstat 28
#define __NR_pause 29
#define __NR_utime 30
#define __NR_stty 31
#define __NR_gtty 32
#define __NR_access 33
#define __NR_nice 34
#define __NR_ftime 35
#define __NR_sync 36
#define __NR_kill 37
#define __NR_rename 38
#define __NR_mkdir 39
#define __NR_rmdir 40
#define __NR_dup 41
#define __NR_pipe 42
#define __NR_times 43
#define __NR_prof 44
#define __NR_brk 45
#define __NR_setgid 46
#define __NR_getgid 47
#define __NR_signal 48
#define __NR_geteuid 49
#define __NR_getegid 50
#define __NR_acct 51
#define __NR_umount2 52
#define __NR_lock 53
#define __NR_ioctl 54
#define __NR_fcntl 55
#define __NR_mpx 56
#define __NR_setpgid 57
#define __NR_ulimit 58
#define __NR_oldolduname 59
#define __NR_umask 60
#define __NR_chroot 61
#define __NR_ustat 62
#define __NR_dup2 63
#define __NR_getppid 64
#define __NR_getpgrp 65
#define __NR_setsid 66
#define __NR_sigaction 67
#define __NR_sgetmask 68
#define __NR_ssetmask 69
#define __NR_setreuid 70
#define __NR_setregid 71
#define __NR_sigsuspend 72
#define __NR_sigpending 73
#define __NR_sethostname 74
#define __NR_setrlimit 75
#define __NR_getrlimit 76
#define __NR_getrusage 77
#define __NR_gettimeofday 78
#define __NR_settimeofday 79
#define __NR_getgroups 80
#define __NR_setgroups 81
#define __NR_select 82
#define __NR_symlink 83
#define __NR_oldlstat 84
#define __NR_readlink 85
#define __NR_uselib 86
#define __NR_swapon 87
#define __NR_reboot 88
#define __NR_readdir 89
#define __NR_mmap 90
#define __NR_munmap 91
#define __NR_truncate 92
#define __NR_ftruncate 93
#define __NR_fchmod 94
#define __NR_fchown 95
#define __NR_getpriority 96
#define __NR_setpriority 97
#define __NR_profil 98
#define __NR_statfs 99
#define __NR_fstatfs 100
#define __NR_ioperm 101
#define __NR_socketcall 102
#define __NR_syslog 103
#define __NR_setitimer 104
#define __NR_getitimer 105
#define __NR_stat 106
#define __NR_lstat 107
#define __NR_fstat 108
#define __NR_olduname 109
#define __NR_iopl 110
#define __NR_vhangup 111
#define __NR_idle 112
#define __NR_vm86 113
#define __NR_wait4 114
#define __NR_swapoff 115
#define __NR_sysinfo 116
#define __NR_ipc 117
#define __NR_fsync 118
#define __NR_sigreturn 119
#define __NR_clone 120
#define __NR_setdomainname 121
#define __NR_uname 122
#define __NR_modify_ldt 123
#define __NR_adjtimex 124
#define __NR_mprotect 125
#define __NR_sigprocmask 126
#define __NR_create_module 127
#define __NR_init_module 128
#define __NR_delete_module 129
#define __NR_get_kernel_syms 130
#define __NR_quotactl 131
#define __NR_getpgid 132
#define __NR_fchdir 133
#define __NR_bdflush 134
#define __NR_sysfs 135
#define __NR_personality 136
#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
#define __NR_setfsuid 138
#define __NR_setfsgid 139
#define __NR__llseek 140
#define __NR_getdents 141
#define __NR__newselect 142
#define __NR_flock 143
#define __NR_msync 144
#define __NR_readv 145
#define __NR_writev 146
#define __NR_getsid 147
#define __NR_fdatasync 148
#define __NR__sysctl 149
#define __NR_mlock 150
#define __NR_munlock 151
#define __NR_mlockall 152
#define __NR_munlockall 153
#define __NR_sched_setparam 154
#define __NR_sched_getparam 155
#define __NR_sched_setscheduler 156
#define __NR_sched_getscheduler 157
#define __NR_sched_yield 158
#define __NR_sched_get_priority_max 159
#define __NR_sched_get_priority_min 160
#define __NR_sched_rr_get_interval 161
#define __NR_nanosleep 162
#define __NR_mremap 163
#define __NR_setresuid 164
#define __NR_getresuid 165
#define __NR_query_module 167
#define __NR_poll 168
#define __NR_nfsservctl 169
#define __NR_setresgid 170
#define __NR_getresgid 171
#define __NR_prctl 172
#define __NR_rt_sigreturn 173
#define __NR_rt_sigaction 174
#define __NR_rt_sigprocmask 175
#define __NR_rt_sigpending 176
#define __NR_rt_sigtimedwait 177
#define __NR_rt_sigqueueinfo 178
#define __NR_rt_sigsuspend 179
#define __NR_pread64 180
#define __NR_pwrite64 181
#define __NR_chown 182
#define __NR_getcwd 183
#define __NR_capget 184
#define __NR_capset 185
#define __NR_sigaltstack 186
#define __NR_sendfile 187
#define __NR_getpmsg 188 /* some people actually want streams */
#define __NR_putpmsg 189 /* some people actually want streams */
#define __NR_vfork 190
#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */
#define __NR_mmap2 192
#define __NR_truncate64 193
#define __NR_ftruncate64 194
#define __NR_stat64 195
#define __NR_lstat64 196
#define __NR_fstat64 197
#define __NR_lchown32 198
#define __NR_getuid32 199
#define __NR_getgid32 200
#define __NR_geteuid32 201
#define __NR_getegid32 202
#define __NR_setreuid32 203
#define __NR_setregid32 204
#define __NR_getgroups32 205
#define __NR_setgroups32 206
#define __NR_fchown32 207
#define __NR_setresuid32 208
#define __NR_getresuid32 209
#define __NR_setresgid32 210
#define __NR_getresgid32 211
#define __NR_chown32 212
#define __NR_setuid32 213
#define __NR_setgid32 214
#define __NR_setfsuid32 215
#define __NR_setfsgid32 216
#define __NR_pivot_root 217
#define __NR_mincore 218
#define __NR_madvise 219
#define __NR_getdents64 220
#define __NR_fcntl64 221
/* 223 is unused */
#define __NR_gettid 224
#define __NR_readahead 225
#define __NR_setxattr 226
#define __NR_lsetxattr 227
#define __NR_fsetxattr 228
#define __NR_getxattr 229
#define __NR_lgetxattr 230
#define __NR_fgetxattr 231
#define __NR_listxattr 232
#define __NR_llistxattr 233
#define __NR_flistxattr 234
#define __NR_removexattr 235
#define __NR_lremovexattr 236
#define __NR_fremovexattr 237
#define __NR_tkill 238
#define __NR_sendfile64 239
#define __NR_futex 240
#define __NR_sched_setaffinity 241
#define __NR_sched_getaffinity 242
#define __NR_set_thread_area 243
#define __NR_get_thread_area 244
#define __NR_io_setup 245
#define __NR_io_destroy 246
#define __NR_io_getevents 247
#define __NR_io_submit 248
#define __NR_io_cancel 249
#define __NR_fadvise64 250
/* 251 is available for reuse (was briefly sys_set_zone_reclaim) */
#define __NR_exit_group 252
#define __NR_lookup_dcookie 253
#define __NR_epoll_create 254
#define __NR_epoll_ctl 255
#define __NR_epoll_wait 256
#define __NR_remap_file_pages 257
#define __NR_set_tid_address 258
#define __NR_timer_create 259
#define __NR_timer_settime (__NR_timer_create+1)
#define __NR_timer_gettime (__NR_timer_create+2)
#define __NR_timer_getoverrun (__NR_timer_create+3)
#define __NR_timer_delete (__NR_timer_create+4)
#define __NR_clock_settime (__NR_timer_create+5)
#define __NR_clock_gettime (__NR_timer_create+6)
#define __NR_clock_getres (__NR_timer_create+7)
#define __NR_clock_nanosleep (__NR_timer_create+8)
#define __NR_statfs64 268
#define __NR_fstatfs64 269
#define __NR_tgkill 270
#define __NR_utimes 271
#define __NR_fadvise64_64 272
#define __NR_vserver 273
#define __NR_mbind 274
#define __NR_get_mempolicy 275
#define __NR_set_mempolicy 276
#define __NR_mq_open 277
#define __NR_mq_unlink (__NR_mq_open+1)
#define __NR_mq_timedsend (__NR_mq_open+2)
#define __NR_mq_timedreceive (__NR_mq_open+3)
#define __NR_mq_notify (__NR_mq_open+4)
#define __NR_mq_getsetattr (__NR_mq_open+5)
#define __NR_kexec_load 283
#define __NR_waitid 284
/* #define __NR_sys_setaltroot 285 */
#define __NR_add_key 286
#define __NR_request_key 287
#define __NR_keyctl 288
#define __NR_ioprio_set 289
#define __NR_ioprio_get 290
#define __NR_inotify_init 291
#define __NR_inotify_add_watch 292
#define __NR_inotify_rm_watch 293
#define __NR_migrate_pages 294
#define __NR_openat 295
#define __NR_mkdirat 296
#define __NR_mknodat 297
#define __NR_fchownat 298
#define __NR_futimesat 299
#define __NR_fstatat64 300
#define __NR_unlinkat 301
#define __NR_renameat 302
#define __NR_linkat 303
#define __NR_symlinkat 304
#define __NR_readlinkat 305
#define __NR_fchmodat 306
#define __NR_faccessat 307
#define __NR_pselect6 308
#define __NR_ppoll 309
#define __NR_unshare 310
#define __NR_set_robust_list 311
#define __NR_get_robust_list 312
#define __NR_splice 313
#define __NR_sync_file_range 314
#define __NR_tee 315
#define __NR_vmsplice 316
#define __NR_move_pages 317
#define __NR_getcpu 318
#define __NR_epoll_pwait 319
#define __NR_utimensat 320
#define __NR_signalfd 321
#define __NR_timerfd_create 322
#define __NR_eventfd 323
#define __NR_fallocate 324
#define __NR_timerfd_settime 325
#define __NR_timerfd_gettime 326
#define __NR_signalfd4 327
#define __NR_eventfd2 328
#define __NR_epoll_create1 329
#define __NR_dup3 330
#define __NR_pipe2 331
#define __NR_inotify_init1 332
#define __NR_preadv 333
#define __NR_pwritev 334
#define __NR_setns 335
#include <uapi/asm/unistd.h>
#ifdef __KERNEL__
#define NR_syscalls 336
......@@ -384,5 +45,4 @@
*/
#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
#endif /* __KERNEL__ */
#endif /* _ASM_CRIS_UNISTD_H_ */
arch/cris/include/uapi/arch-v10/arch/Kbuild
浏览文件 @ 21e89c0c
# UAPI Header export list
header-y += sv_addr.agh
header-y += sv_addr_ag.h
header-y += svinto.h
header-y += user.h
arch/cris/include/uapi/arch-v32/arch/Kbuild
浏览文件 @ 21e89c0c
# UAPI Header export list
header-y += cryptocop.h
header-y += user.h
arch/cris/include/uapi/arch-v32/arch/cryptocop.h 0 → 100644
浏览文件 @ 21e89c0c
/*
* The device /dev/cryptocop is accessible using this driver using
* CRYPTOCOP_MAJOR (254) and minor number 0.
*/
#ifndef _UAPICRYPTOCOP_H
#define _UAPICRYPTOCOP_H
#include <linux/uio.h>
#define CRYPTOCOP_SESSION_ID_NONE (0)
typedef unsigned long long int cryptocop_session_id;
/* cryptocop ioctls */
#define ETRAXCRYPTOCOP_IOCTYPE (250)
#define CRYPTOCOP_IO_CREATE_SESSION _IOWR(ETRAXCRYPTOCOP_IOCTYPE, 1, struct strcop_session_op)
#define CRYPTOCOP_IO_CLOSE_SESSION _IOW(ETRAXCRYPTOCOP_IOCTYPE, 2, struct strcop_session_op)
#define CRYPTOCOP_IO_PROCESS_OP _IOWR(ETRAXCRYPTOCOP_IOCTYPE, 3, struct strcop_crypto_op)
#define CRYPTOCOP_IO_MAXNR (3)
typedef enum {
cryptocop_cipher_des = 0,
cryptocop_cipher_3des = 1,
cryptocop_cipher_aes = 2,
cryptocop_cipher_m2m = 3, /* mem2mem is essentially a NULL cipher with blocklength=1 */
cryptocop_cipher_none
} cryptocop_cipher_type;
typedef enum {
cryptocop_digest_sha1 = 0,
cryptocop_digest_md5 = 1,
cryptocop_digest_none
} cryptocop_digest_type;
typedef enum {
cryptocop_csum_le = 0,
cryptocop_csum_be = 1,
cryptocop_csum_none
} cryptocop_csum_type;
typedef enum {
cryptocop_cipher_mode_ecb = 0,
cryptocop_cipher_mode_cbc,
cryptocop_cipher_mode_none
} cryptocop_cipher_mode;
typedef enum {
cryptocop_3des_eee = 0,
cryptocop_3des_eed = 1,
cryptocop_3des_ede = 2,
cryptocop_3des_edd = 3,
cryptocop_3des_dee = 4,
cryptocop_3des_ded = 5,
cryptocop_3des_dde = 6,
cryptocop_3des_ddd = 7
} cryptocop_3des_mode;
/* Usermode accessible (ioctl) operations. */
struct strcop_session_op{
cryptocop_session_id ses_id;
cryptocop_cipher_type cipher; /* AES, DES, 3DES, m2m, none */
cryptocop_cipher_mode cmode; /* ECB, CBC, none */
cryptocop_3des_mode des3_mode;
cryptocop_digest_type digest; /* MD5, SHA1, none */
cryptocop_csum_type csum; /* BE, LE, none */
unsigned char *key;
size_t keylen;
};
#define CRYPTOCOP_CSUM_LENGTH (2)
#define CRYPTOCOP_MAX_DIGEST_LENGTH (20) /* SHA-1 20, MD5 16 */
#define CRYPTOCOP_MAX_IV_LENGTH (16) /* (3)DES==8, AES == 16 */
#define CRYPTOCOP_MAX_KEY_LENGTH (32)
struct strcop_crypto_op{
cryptocop_session_id ses_id;
/* Indata. */
unsigned char *indata;
size_t inlen; /* Total indata length. */
/* Cipher configuration. */
unsigned char do_cipher:1;
unsigned char decrypt:1; /* 1 == decrypt, 0 == encrypt */
unsigned char cipher_explicit:1;
size_t cipher_start;
size_t cipher_len;
/* cipher_iv is used if do_cipher and cipher_explicit and the cipher
mode is CBC. The length is controlled by the type of cipher,
e.g. DES/3DES 8 octets and AES 16 octets. */
unsigned char cipher_iv[CRYPTOCOP_MAX_IV_LENGTH];
/* Outdata. */
unsigned char *cipher_outdata;
size_t cipher_outlen;
/* digest configuration. */
unsigned char do_digest:1;
size_t digest_start;
size_t digest_len;
/* Outdata. The actual length is determined by the type of the digest. */
unsigned char digest[CRYPTOCOP_MAX_DIGEST_LENGTH];
/* Checksum configuration. */
unsigned char do_csum:1;
size_t csum_start;
size_t csum_len;
/* Outdata. */
unsigned char csum[CRYPTOCOP_CSUM_LENGTH];
};
#endif /* _UAPICRYPTOCOP_H */
arch/cris/include/uapi/asm/Kbuild
浏览文件 @ 21e89c0c
......@@ -3,3 +3,37 @@ include include/uapi/asm-generic/Kbuild.asm
header-y += arch-v10/
header-y += arch-v32/
header-y += auxvec.h
header-y += bitsperlong.h
header-y += byteorder.h
header-y += errno.h
header-y += ethernet.h
header-y += etraxgpio.h
header-y += fcntl.h
header-y += ioctl.h
header-y += ioctls.h
header-y += ipcbuf.h
header-y += mman.h
header-y += msgbuf.h
header-y += param.h
header-y += poll.h
header-y += posix_types.h
header-y += ptrace.h
header-y += resource.h
header-y += rs485.h
header-y += sembuf.h
header-y += setup.h
header-y += shmbuf.h
header-y += sigcontext.h
header-y += siginfo.h
header-y += signal.h
header-y += socket.h
header-y += sockios.h
header-y += stat.h
header-y += statfs.h
header-y += swab.h
header-y += sync_serial.h
header-y += termbits.h
header-y += termios.h
header-y += types.h
header-y += unistd.h
arch/cris/include/uapi/asm/signal.h 0 → 100644
浏览文件 @ 21e89c0c
#ifndef _UAPI_ASM_CRIS_SIGNAL_H
#define _UAPI_ASM_CRIS_SIGNAL_H
#include <linux/types.h>
/* Avoid too many header ordering problems. */
struct siginfo;
#ifndef __KERNEL__
/* Here we must cater to libcs that poke about in kernel headers. */
#define NSIG 32
typedef unsigned long sigset_t;
#endif /* __KERNEL__ */
#define SIGHUP 1
#define SIGINT 2
#define SIGQUIT 3
#define SIGILL 4
#define SIGTRAP 5
#define SIGABRT 6
#define SIGIOT 6
#define SIGBUS 7
#define SIGFPE 8
#define SIGKILL 9
#define SIGUSR1 10
#define SIGSEGV 11
#define SIGUSR2 12
#define SIGPIPE 13
#define SIGALRM 14
#define SIGTERM 15
#define SIGSTKFLT 16
#define SIGCHLD 17
#define SIGCONT 18
#define SIGSTOP 19
#define SIGTSTP 20
#define SIGTTIN 21
#define SIGTTOU 22
#define SIGURG 23
#define SIGXCPU 24
#define SIGXFSZ 25
#define SIGVTALRM 26
#define SIGPROF 27
#define SIGWINCH 28
#define SIGIO 29
#define SIGPOLL SIGIO
/*
#define SIGLOST 29
*/
#define SIGPWR 30
#define SIGSYS 31
#define SIGUNUSED 31
/* These should not be considered constants from userland. */
#define SIGRTMIN 32
#define SIGRTMAX _NSIG
/*
* SA_FLAGS values:
*
* SA_ONSTACK indicates that a registered stack_t will be used.
* SA_RESTART flag to get restarting signals (which were the default long ago)
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
* SA_RESETHAND clears the handler when the signal is delivered.
* SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
* SA_NODEFER prevents the current signal from being masked in the handler.
*
* SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
* Unix names RESETHAND and NODEFER respectively.
*/
#define SA_NOCLDSTOP 0x00000001u
#define SA_NOCLDWAIT 0x00000002u
#define SA_SIGINFO 0x00000004u
#define SA_ONSTACK 0x08000000u
#define SA_RESTART 0x10000000u
#define SA_NODEFER 0x40000000u
#define SA_RESETHAND 0x80000000u
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
#define SA_RESTORER 0x04000000
/*
* sigaltstack controls
*/
#define SS_ONSTACK 1
#define SS_DISABLE 2
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
#include <asm-generic/signal-defs.h>
#ifndef __KERNEL__
/* Here we must cater to libcs that poke about in kernel headers. */
struct sigaction {
union {
__sighandler_t _sa_handler;
void (*_sa_sigaction)(int, struct siginfo *, void *);
} _u;
sigset_t sa_mask;
unsigned long sa_flags;
void (*sa_restorer)(void);
};
#define sa_handler _u._sa_handler
#define sa_sigaction _u._sa_sigaction
#endif /* __KERNEL__ */
typedef struct sigaltstack {
void *ss_sp;
int ss_flags;
size_t ss_size;
} stack_t;
#endif /* _UAPI_ASM_CRIS_SIGNAL_H */
arch/cris/include/uapi/asm/swab.h 0 → 100644
浏览文件 @ 21e89c0c
/*
* CRIS byte swapping.
*/
arch/cris/include/uapi/asm/termios.h 0 → 100644
浏览文件 @ 21e89c0c
此差异已折叠。
arch/cris/include/uapi/asm/types.h 0 → 100644
浏览文件 @ 21e89c0c
此差异已折叠。
arch/cris/include/uapi/asm/unistd.h 0 → 100644
浏览文件 @ 21e89c0c
此差异已折叠。
arch/cris/kernel/asm-offsets.c
浏览文件 @ 21e89c0c
此差异已折叠。
arch/h8300/include/asm/Kbuild
浏览文件 @ 21e89c0c
此差异已折叠。
arch/h8300/include/asm/param.h
浏览文件 @ 21e89c0c
此差异已折叠。
arch/h8300/include/asm/ptrace.h
浏览文件 @ 21e89c0c
此差异已折叠。
arch/h8300/include/asm/signal.h
浏览文件 @ 21e89c0c
此差异已折叠。
arch/h8300/include/asm/termios.h
浏览文件 @ 21e89c0c
此差异已折叠。
arch/h8300/include/asm/types.h
浏览文件 @ 21e89c0c
此差异已折叠。
arch/h8300/include/asm/unistd.h
浏览文件 @ 21e89c0c
此差异已折叠。
arch/h8300/include/uapi/asm/Kbuild
浏览文件 @ 21e89c0c
此差异已折叠。
arch/h8300/include/uapi/asm/param.h 0 → 100644
浏览文件 @ 21e89c0c
此差异已折叠。
arch/h8300/include/uapi/asm/ptrace.h 0 → 100644
浏览文件 @ 21e89c0c
此差异已折叠。
arch/h8300/include/uapi/asm/signal.h 0 → 100644
浏览文件 @ 21e89c0c
此差异已折叠。
arch/h8300/include/uapi/asm/termios.h 0 → 100644
浏览文件 @ 21e89c0c
此差异已折叠。
arch/h8300/include/uapi/asm/types.h 0 → 100644
浏览文件 @ 21e89c0c
此差异已折叠。
arch/h8300/include/uapi/asm/unistd.h 0 → 100644
浏览文件 @ 21e89c0c
此差异已折叠。
arch/m32r/include/asm/Kbuild
浏览文件 @ 21e89c0c
此差异已折叠。
arch/m32r/include/asm/ptrace.h
浏览文件 @ 21e89c0c
此差异已折叠。
arch/m32r/include/asm/setup.h
浏览文件 @ 21e89c0c
此差异已折叠。
arch/m32r/include/asm/signal.h
浏览文件 @ 21e89c0c
此差异已折叠。
arch/m32r/include/asm/termios.h
浏览文件 @ 21e89c0c
此差异已折叠。
arch/m32r/include/asm/types.h
浏览文件 @ 21e89c0c
此差异已折叠。
arch/m32r/include/asm/unistd.h
浏览文件 @ 21e89c0c
此差异已折叠。
arch/m32r/include/uapi/asm/Kbuild
浏览文件 @ 21e89c0c
此差异已折叠。
arch/m32r/include/uapi/asm/ptrace.h 0 → 100644
浏览文件 @ 21e89c0c
此差异已折叠。
arch/m32r/include/uapi/asm/setup.h 0 → 100644
浏览文件 @ 21e89c0c
此差异已折叠。
arch/m32r/include/uapi/asm/signal.h 0 → 100644
浏览文件 @ 21e89c0c
此差异已折叠。
arch/m32r/include/uapi/asm/termios.h 0 → 100644
浏览文件 @ 21e89c0c
此差异已折叠。
arch/m32r/include/uapi/asm/types.h 0 → 100644
浏览文件 @ 21e89c0c
此差异已折叠。
arch/m32r/include/uapi/asm/unistd.h 0 → 100644
浏览文件 @ 21e89c0c
此差异已折叠。
arch/score/include/asm/Kbuild
浏览文件 @ 21e89c0c
此差异已折叠。
arch/score/include/asm/ptrace.h
浏览文件 @ 21e89c0c
此差异已折叠。
arch/score/include/asm/setup.h
浏览文件 @ 21e89c0c
此差异已折叠。
arch/score/include/uapi/asm/Kbuild
浏览文件 @ 21e89c0c
此差异已折叠。
arch/score/include/uapi/asm/ptrace.h 0 → 100644
浏览文件 @ 21e89c0c
此差异已折叠。
arch/score/include/uapi/asm/setup.h 0 → 100644
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/amba/tegra-ahb.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/base/dma-buf.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/char/virtio_console.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/hwmon/hwmon-vid.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/hwmon/hwmon.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/hwmon/it87.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/hwmon/w83627ehf.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/hwmon/w83627hf.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/lguest/core.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/mfd/omap-usb-host.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/mtd/ubi/attach.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/mtd/ubi/build.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/mtd/ubi/debug.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/mtd/ubi/debug.h
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/mtd/ubi/fastmap.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/mtd/ubi/gluebi.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/mtd/ubi/io.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/mtd/ubi/ubi.h
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/mtd/ubi/upd.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/mtd/ubi/vmt.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/mtd/ubi/vtbl.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/mtd/ubi/wl.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/net/virtio_net.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/rpmsg/virtio_rpmsg_bus.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/scsi/virtio_scsi.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/tty/serial/omap-serial.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/virtio/virtio.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/virtio/virtio_balloon.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/virtio/virtio_mmio.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/virtio/virtio_pci.c
浏览文件 @ 21e89c0c
此差异已折叠。
drivers/virtio/virtio_ring.c
浏览文件 @ 21e89c0c
此差异已折叠。
fs/cachefiles/interface.c
浏览文件 @ 21e89c0c
此差异已折叠。
fs/cachefiles/internal.h
浏览文件 @ 21e89c0c
此差异已折叠。
fs/cachefiles/key.c
浏览文件 @ 21e89c0c
此差异已折叠。
fs/cachefiles/namei.c
浏览文件 @ 21e89c0c
此差异已折叠。
fs/cachefiles/rdwr.c
浏览文件 @ 21e89c0c
此差异已折叠。
fs/cachefiles/xattr.c
浏览文件 @ 21e89c0c
此差异已折叠。
fs/fscache/cache.c
浏览文件 @ 21e89c0c
此差异已折叠。
fs/fscache/cookie.c
浏览文件 @ 21e89c0c
此差异已折叠。
fs/fscache/internal.h
浏览文件 @ 21e89c0c
此差异已折叠。
fs/fscache/object-list.c
浏览文件 @ 21e89c0c
此差异已折叠。
fs/fscache/object.c
浏览文件 @ 21e89c0c
此差异已折叠。
fs/fscache/operation.c
浏览文件 @ 21e89c0c
此差异已折叠。
fs/fscache/page.c
浏览文件 @ 21e89c0c
此差异已折叠。
fs/fscache/stats.c
浏览文件 @ 21e89c0c
此差异已折叠。
fs/nfs/fscache.c
浏览文件 @ 21e89c0c
此差异已折叠。
fs/nfs/fscache.h
浏览文件 @ 21e89c0c
此差异已折叠。
fs/nfs/inode.c
浏览文件 @ 21e89c0c
此差异已折叠。
fs/nfs/nfs4file.c
浏览文件 @ 21e89c0c
此差异已折叠。
fs/nfs/nfs4proc.c
浏览文件 @ 21e89c0c
此差异已折叠。
fs/nfs/write.c
浏览文件 @ 21e89c0c
此差异已折叠。
fs/open.c
浏览文件 @ 21e89c0c
此差异已折叠。
include/linux/dma-buf.h
浏览文件 @ 21e89c0c
此差异已折叠。
include/linux/fs.h
浏览文件 @ 21e89c0c
此差异已折叠。
include/linux/fscache-cache.h
浏览文件 @ 21e89c0c
此差异已折叠。
include/linux/fscache.h
浏览文件 @ 21e89c0c
此差异已折叠。
include/linux/virtio.h
浏览文件 @ 21e89c0c
此差异已折叠。
include/linux/virtio_scsi.h
浏览文件 @ 21e89c0c
此差异已折叠。
include/sound/soc-dai.h
浏览文件 @ 21e89c0c
此差异已折叠。
include/sound/soc.h
浏览文件 @ 21e89c0c
此差异已折叠。
include/uapi/linux/virtio_ids.h
浏览文件 @ 21e89c0c
此差异已折叠。
include/video/omap-panel-tfp410.h
浏览文件 @ 21e89c0c
此差异已折叠。
kernel/sched/fair.c
浏览文件 @ 21e89c0c
此差异已折叠。
mm/highmem.c
浏览文件 @ 21e89c0c
此差异已折叠。
mm/ksm.c
浏览文件 @ 21e89c0c
此差异已折叠。
mm/vmscan.c
浏览文件 @ 21e89c0c
此差异已折叠。
net/9p/trans_virtio.c
浏览文件 @ 21e89c0c
此差异已折叠。
sound/pci/hda/hda_intel.c
浏览文件 @ 21e89c0c
此差异已折叠。
sound/pci/hda/patch_hdmi.c
浏览文件 @ 21e89c0c
此差异已折叠。
sound/pci/hda/patch_realtek.c
浏览文件 @ 21e89c0c
此差异已折叠。
sound/pci/hda/patch_sigmatel.c
浏览文件 @ 21e89c0c
此差异已折叠。
sound/soc/codecs/cs42l73.c
浏览文件 @ 21e89c0c
此差异已折叠。
sound/soc/codecs/sigmadsp.c
浏览文件 @ 21e89c0c
此差异已折叠。
sound/soc/codecs/tpa6130a2.c
浏览文件 @ 21e89c0c
此差异已折叠。
sound/soc/soc-compress.c
浏览文件 @ 21e89c0c
此差异已折叠。
sound/soc/soc-core.c
浏览文件 @ 21e89c0c
此差异已折叠。
sound/soc/soc-pcm.c
浏览文件 @ 21e89c0c
此差异已折叠。
sound/usb/midi.c
浏览文件 @ 21e89c0c
此差异已折叠。
sound/usb/quirks-table.h
浏览文件 @ 21e89c0c
此差异已折叠。
sound/usb/quirks.c
浏览文件 @ 21e89c0c
此差异已折叠。
sound/usb/usbaudio.h
浏览文件 @ 21e89c0c
此差异已折叠。
tools/lguest/lguest.c
浏览文件 @ 21e89c0c
此差异已折叠。
tools/virtio/virtio_test.c
浏览文件 @ 21e89c0c
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或