提交 21d889d4 编写于 作者: R Rafał Miłecki 提交者: John W. Linville

b43: bus: abstract 80211 core info

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 c0b4c009
......@@ -70,5 +70,8 @@ struct b43_bus_dev *b43_bus_dev_ssb_init(struct ssb_device *sdev)
dev->block_read = b43_bus_ssb_block_read;
dev->block_write = b43_bus_ssb_block_write;
dev->core_id = sdev->id.coreid;
dev->core_rev = sdev->id.revision;
return dev;
}
......@@ -19,6 +19,9 @@ struct b43_bus_dev {
size_t count, u16 offset, u8 reg_width);
void (*block_write)(struct b43_bus_dev *dev, const void *buffer,
size_t count, u16 offset, u8 reg_width);
u16 core_id;
u8 core_rev;
};
struct b43_bus_dev *b43_bus_dev_ssb_init(struct ssb_device *sdev);
......
......@@ -1085,7 +1085,7 @@ int b43_dma_init(struct b43_wldev *dev)
goto err_destroy_mcast;
/* No support for the TX status DMA ring. */
B43_WARN_ON(dev->sdev->id.revision < 5);
B43_WARN_ON(dev->dev->core_rev < 5);
b43dbg(dev->wl, "%u-bit DMA initialized\n",
(unsigned int)type);
......
......@@ -548,7 +548,7 @@ void b43_tsf_read(struct b43_wldev *dev, u64 *tsf)
{
u32 low, high;
B43_WARN_ON(dev->sdev->id.revision < 3);
B43_WARN_ON(dev->dev->core_rev < 3);
/* The hardware guarantees us an atomic read, if we
* read the low register first. */
......@@ -586,7 +586,7 @@ static void b43_tsf_write_locked(struct b43_wldev *dev, u64 tsf)
{
u32 low, high;
B43_WARN_ON(dev->sdev->id.revision < 3);
B43_WARN_ON(dev->dev->core_rev < 3);
low = tsf;
high = (tsf >> 32);
......@@ -714,7 +714,7 @@ void b43_dummy_transmission(struct b43_wldev *dev, bool ofdm, bool pa_on)
b43_ram_write(dev, i * 4, buffer[i]);
b43_write16(dev, 0x0568, 0x0000);
if (dev->sdev->id.revision < 11)
if (dev->dev->core_rev < 11)
b43_write16(dev, 0x07C0, 0x0000);
else
b43_write16(dev, 0x07C0, 0x0100);
......@@ -1132,7 +1132,7 @@ void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags)
b43_write32(dev, B43_MMIO_MACCTL, macctl);
/* Commit write */
b43_read32(dev, B43_MMIO_MACCTL);
if (awake && dev->sdev->id.revision >= 5) {
if (awake && dev->dev->core_rev >= 5) {
/* Wait for the microcode to wake up. */
for (i = 0; i < 100; i++) {
ucstat = b43_shm_read16(dev, B43_SHM_SHARED,
......@@ -1221,7 +1221,7 @@ static void drain_txstatus_queue(struct b43_wldev *dev)
{
u32 dummy;
if (dev->sdev->id.revision < 5)
if (dev->dev->core_rev < 5)
return;
/* Read all entries from the microcode TXstatus FIFO
* and throw them away.
......@@ -1689,7 +1689,7 @@ static void b43_update_templates(struct b43_wl *wl)
static void b43_set_beacon_int(struct b43_wldev *dev, u16 beacon_int)
{
b43_time_lock(dev);
if (dev->sdev->id.revision >= 3) {
if (dev->dev->core_rev >= 3) {
b43_write32(dev, B43_MMIO_TSF_CFP_REP, (beacon_int << 16));
b43_write32(dev, B43_MMIO_TSF_CFP_START, (beacon_int << 10));
} else {
......@@ -2113,7 +2113,7 @@ static int b43_try_request_fw(struct b43_request_fw_context *ctx)
{
struct b43_wldev *dev = ctx->dev;
struct b43_firmware *fw = &ctx->dev->fw;
const u8 rev = ctx->dev->sdev->id.revision;
const u8 rev = ctx->dev->dev->core_rev;
const char *filename;
u32 tmshigh;
int err;
......@@ -2448,7 +2448,7 @@ static int b43_upload_microcode(struct b43_wldev *dev)
snprintf(wiphy->fw_version, sizeof(wiphy->fw_version), "%u.%u",
dev->fw.rev, dev->fw.patch);
wiphy->hw_version = dev->sdev->id.coreid;
wiphy->hw_version = dev->dev->core_id;
if (b43_is_old_txhdr_format(dev)) {
/* We're over the deadline, but we keep support for old fw
......@@ -2606,7 +2606,7 @@ static int b43_gpio_init(struct b43_wldev *dev)
mask |= 0x0200;
set |= 0x0200;
}
if (dev->sdev->id.revision >= 2)
if (dev->dev->core_rev >= 2)
mask |= 0x0010; /* FIXME: This is redundant. */
gpiodev = b43_ssb_gpio_dev(dev);
......@@ -2741,7 +2741,7 @@ static void b43_adjust_opmode(struct b43_wldev *dev)
/* Workaround: On old hardware the HW-MAC-address-filter
* doesn't work properly, so always run promisc in filter
* it in software. */
if (dev->sdev->id.revision <= 4)
if (dev->dev->core_rev <= 4)
ctl |= B43_MACCTL_PROMISC;
b43_write32(dev, B43_MMIO_MACCTL, ctl);
......@@ -2907,7 +2907,7 @@ static int b43_chip_init(struct b43_wldev *dev)
b43_write16(dev, 0x005E, value16);
}
b43_write32(dev, 0x0100, 0x01000000);
if (dev->sdev->id.revision < 5)
if (dev->dev->core_rev < 5)
b43_write32(dev, 0x010C, 0x01000000);
b43_write32(dev, B43_MMIO_MACCTL, b43_read32(dev, B43_MMIO_MACCTL)
......@@ -2922,7 +2922,7 @@ static int b43_chip_init(struct b43_wldev *dev)
/* Initially set the wireless operation mode. */
b43_adjust_opmode(dev);
if (dev->sdev->id.revision < 3) {
if (dev->dev->core_rev < 3) {
b43_write16(dev, 0x060E, 0x0000);
b43_write16(dev, 0x0610, 0x8000);
b43_write16(dev, 0x0604, 0x0000);
......@@ -3105,7 +3105,7 @@ static int b43_validate_chipaccess(struct b43_wldev *dev)
b43_shm_write32(dev, B43_SHM_SHARED, 0, backup0);
b43_shm_write32(dev, B43_SHM_SHARED, 4, backup4);
if ((dev->sdev->id.revision >= 3) && (dev->sdev->id.revision <= 10)) {
if ((dev->dev->core_rev >= 3) && (dev->dev->core_rev <= 10)) {
/* The 32bit register shadows the two 16bit registers
* with update sideeffects. Validate this. */
b43_write16(dev, B43_MMIO_TSF_CFP_START, 0xAAAA);
......@@ -4352,7 +4352,7 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
if (err)
goto err_busdown;
b43_shm_write16(dev, B43_SHM_SHARED,
B43_SHM_SH_WLCOREREV, dev->sdev->id.revision);
B43_SHM_SH_WLCOREREV, dev->dev->core_rev);
hf = b43_hf_read(dev);
if (phy->type == B43_PHYTYPE_G) {
hf |= B43_HF_SYMW;
......@@ -4756,7 +4756,7 @@ static int b43_wireless_core_attach(struct b43_wldev *dev)
goto out;
}
/* Get the PHY type. */
if (dev->sdev->id.revision >= 5) {
if (dev->dev->core_rev >= 5) {
u32 tmshigh;
tmshigh = ssb_read32(dev->sdev, SSB_TMSHIGH);
......
......@@ -168,7 +168,7 @@ void b43_phy_lock(struct b43_wldev *dev)
B43_WARN_ON(dev->phy.phy_locked);
dev->phy.phy_locked = 1;
#endif
B43_WARN_ON(dev->sdev->id.revision < 3);
B43_WARN_ON(dev->dev->core_rev < 3);
if (!b43_is_mode(dev->wl, NL80211_IFTYPE_AP))
b43_power_saving_ctl_bits(dev, B43_PS_AWAKE);
......@@ -180,7 +180,7 @@ void b43_phy_unlock(struct b43_wldev *dev)
B43_WARN_ON(!dev->phy.phy_locked);
dev->phy.phy_locked = 0;
#endif
B43_WARN_ON(dev->sdev->id.revision < 3);
B43_WARN_ON(dev->dev->core_rev < 3);
if (!b43_is_mode(dev->wl, NL80211_IFTYPE_AP))
b43_power_saving_ctl_bits(dev, 0);
......
......@@ -983,7 +983,7 @@ static u16 b43_nphy_classifier(struct b43_wldev *dev, u16 mask, u16 val)
{
u16 tmp;
if (dev->sdev->id.revision == 16)
if (dev->dev->core_rev == 16)
b43_mac_suspend(dev);
tmp = b43_phy_read(dev, B43_NPHY_CLASSCTL);
......@@ -993,7 +993,7 @@ static u16 b43_nphy_classifier(struct b43_wldev *dev, u16 mask, u16 val)
tmp |= (val & mask);
b43_phy_maskset(dev, B43_NPHY_CLASSCTL, 0xFFF8, tmp);
if (dev->sdev->id.revision == 16)
if (dev->dev->core_rev == 16)
b43_mac_enable(dev);
return tmp;
......
......@@ -111,7 +111,7 @@ static u16 index_to_pioqueue_base(struct b43_wldev *dev,
B43_MMIO_PIO11_BASE5,
};
if (dev->sdev->id.revision >= 11) {
if (dev->dev->core_rev >= 11) {
B43_WARN_ON(index >= ARRAY_SIZE(bases_rev11));
return bases_rev11[index];
}
......@@ -121,14 +121,14 @@ static u16 index_to_pioqueue_base(struct b43_wldev *dev,
static u16 pio_txqueue_offset(struct b43_wldev *dev)
{
if (dev->sdev->id.revision >= 11)
if (dev->dev->core_rev >= 11)
return 0x18;
return 0;
}
static u16 pio_rxqueue_offset(struct b43_wldev *dev)
{
if (dev->sdev->id.revision >= 11)
if (dev->dev->core_rev >= 11)
return 0x38;
return 8;
}
......@@ -144,7 +144,7 @@ static struct b43_pio_txqueue *b43_setup_pioqueue_tx(struct b43_wldev *dev,
if (!q)
return NULL;
q->dev = dev;
q->rev = dev->sdev->id.revision;
q->rev = dev->dev->core_rev;
q->mmio_base = index_to_pioqueue_base(dev, index) +
pio_txqueue_offset(dev);
q->index = index;
......@@ -178,7 +178,7 @@ static struct b43_pio_rxqueue *b43_setup_pioqueue_rx(struct b43_wldev *dev,
if (!q)
return NULL;
q->dev = dev;
q->rev = dev->sdev->id.revision;
q->rev = dev->dev->core_rev;
q->mmio_base = index_to_pioqueue_base(dev, index) +
pio_rxqueue_offset(dev);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册