Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 169
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 2192482e 编写于 作者: R Russell King
浏览文件
操作

Merge branch 'for-rmk' of... 

Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable

Conflicts:
	arch/arm/Kconfig
上级 500b9fc9 a68fefe0
展开全部 隐藏空白更改
内联 并排
Showing with 5267 addition and 375 deletion
arch/arm/Kconfig
浏览文件 @ 2192482e
......@@ -636,6 +636,7 @@ config ARCH_S3C2410
select ARCH_HAS_CPUFREQ
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
select HAVE_S3C2410_I2C
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
......@@ -665,6 +666,8 @@ config ARCH_S3C64XX
select S3C_DEV_NAND
select USB_ARCH_HAS_OHCI
select SAMSUNG_GPIOLIB_4BIT
select HAVE_S3C2410_I2C
select HAVE_S3C2410_WATCHDOG
help
Samsung S3C64XX series based systems
......@@ -673,7 +676,10 @@ config ARCH_S5P6440
select CPU_V6
select GENERIC_GPIO
select HAVE_CLK
select HAVE_S3C2410_WATCHDOG
select ARCH_USES_GETTIMEOFFSET
select HAVE_S3C2410_I2C
select HAVE_S3C_RTC
help
Samsung S5P6440 CPU based systems
......@@ -683,6 +689,7 @@ config ARCH_S5P6442
select GENERIC_GPIO
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
select HAVE_S3C2410_WATCHDOG
help
Samsung S5P6442 CPU based systems
......@@ -693,6 +700,9 @@ config ARCH_S5PC100
select CPU_V7
select ARM_L1_CACHE_SHIFT_6
select ARCH_USES_GETTIMEOFFSET
select HAVE_S3C2410_I2C
select HAVE_S3C_RTC
select HAVE_S3C2410_WATCHDOG
help
Samsung S5PC100 series based systems
......@@ -703,9 +713,21 @@ config ARCH_S5PV210
select HAVE_CLK
select ARM_L1_CACHE_SHIFT_6
select ARCH_USES_GETTIMEOFFSET
select HAVE_S3C2410_I2C
select HAVE_S3C_RTC
select HAVE_S3C2410_WATCHDOG
help
Samsung S5PV210/S5PC110 series based systems
config ARCH_S5PV310
bool "Samsung S5PV310/S5PC210"
select CPU_V7
select GENERIC_GPIO
select HAVE_CLK
select GENERIC_CLOCKEVENTS
help
Samsung S5PV310 series based systems
config ARCH_SHARK
bool "Shark"
select CPU_SA110
......@@ -907,6 +929,8 @@ source "arch/arm/mach-s5pc100/Kconfig"
source "arch/arm/mach-s5pv210/Kconfig"
source "arch/arm/mach-s5pv310/Kconfig"
source "arch/arm/mach-shmobile/Kconfig"
source "arch/arm/plat-stmp3xxx/Kconfig"
......@@ -1098,10 +1122,11 @@ config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_S5PV310)
depends on GENERIC_CLOCKEVENTS
select USE_GENERIC_SMP_HELPERS
select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 ||\
ARCH_S5PV310)
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
......@@ -1171,9 +1196,9 @@ config LOCAL_TIMERS
bool "Use local timer interrupts"
depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
default y
select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_VEXPRESS || ARCH_OMAP4 || ARCH_U8500)
ARCH_S5PV310 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 || \
ARCH_U8500 || ARCH_VEXPRESS)
help
Enable support for local timers on SMP platforms, rather then the
legacy IPI broadcast method. Local timers allows the system
......@@ -1184,7 +1209,8 @@ source kernel/Kconfig.preempt
config HZ
int
default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210
default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || \
ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
default AT91_TIMER_HZ if ARCH_AT91
default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
......
arch/arm/Makefile
浏览文件 @ 2192482e
......@@ -174,6 +174,7 @@ machine-$(CONFIG_ARCH_S5P6440) := s5p6440
machine-$(CONFIG_ARCH_S5P6442) := s5p6442
machine-$(CONFIG_ARCH_S5PC100) := s5pc100
machine-$(CONFIG_ARCH_S5PV210) := s5pv210
machine-$(CONFIG_ARCH_S5PV310) := s5pv310
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_SHMOBILE) := shmobile
......
arch/arm/configs/s5pc110_defconfig 已删除 100644 → 0
浏览文件 @ 500b9fc9
CONFIG_EXPERIMENTAL=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_S5PV210=y
CONFIG_S3C_LOWLEVEL_UART_PORT=1
CONFIG_MACH_SMDKC110=y
CONFIG_VMSPLIT_2G=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_HW_RANDOM=y
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_CRAMFS=y
CONFIG_ROMFS_FS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_BSD_DISKLABEL=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_S3C_UART=1
CONFIG_CRC_CCITT=y
arch/arm/configs/s5pv210_defconfig
浏览文件 @ 2192482e
......@@ -7,6 +7,11 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_S5PV210=y
CONFIG_S3C_LOWLEVEL_UART_PORT=1
CONFIG_S3C_DEV_FB=y
CONFIG_S5PV210_SETUP_FB_24BPP=y
CONFIG_MACH_AQUILA=y
CONFIG_MACH_GONI=y
CONFIG_MACH_SMDKC110=y
CONFIG_MACH_SMDKV210=y
CONFIG_VMSPLIT_2G=y
CONFIG_PREEMPT=y
......
arch/arm/mach-s3c64xx/Kconfig
浏览文件 @ 2192482e
......@@ -57,11 +57,21 @@ config S3C64XX_SETUP_I2C1
help
Common setup code for i2c bus 1.
config S3C64XX_SETUP_IDE
bool
help
Common setup code for S3C64XX IDE.
config S3C64XX_SETUP_FB_24BPP
bool
help
Common setup code for S3C64XX with an 24bpp RGB display helper.
config S3C64XX_SETUP_KEYPAD
bool
help
Common setup code for S3C64XX KEYPAD GPIO configurations
config S3C64XX_SETUP_SDHCI_GPIO
bool
help
......@@ -95,15 +105,20 @@ config MACH_SMDK6410
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_I2C1
select SAMSUNG_DEV_IDE
select S3C_DEV_FB
select S3C_DEV_RTC
select SAMSUNG_DEV_TS
select S3C_DEV_USB_HOST
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select SAMSUNG_DEV_KEYPAD
select HAVE_S3C2410_WATCHDOG
select S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_I2C1
select S3C64XX_SETUP_IDE
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_KEYPAD
help
Machine support for the Samsung SMDK6410
......
arch/arm/mach-s3c64xx/Makefile
浏览文件 @ 2192482e
......@@ -35,6 +35,8 @@ obj-$(CONFIG_S3C64XX_DMA) += dma.o
obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o
obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o
obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
......
arch/arm/mach-s3c64xx/clock.c
浏览文件 @ 2192482e
......@@ -132,6 +132,12 @@ static struct clk init_clocks_disable[] = {
.name = "nand",
.id = -1,
.parent = &clk_h,
}, {
.name = "rtc",
.id = -1,
.parent = &clk_p,
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_RTC,
}, {
.name = "adc",
.id = -1,
......@@ -165,6 +171,12 @@ static struct clk init_clocks_disable[] = {
.ctrlbit = S3C6410_CLKCON_PCLK_IIS2,
}, {
#endif
.name = "keypad",
.id = -1,
.parent = &clk_p,
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_KEYPAD,
}, {
.name = "spi",
.id = 0,
.parent = &clk_p,
......@@ -294,12 +306,6 @@ static struct clk init_clocks[] = {
.parent = &clk_p,
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_UART3,
}, {
.name = "rtc",
.id = -1,
.parent = &clk_p,
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_RTC,
}, {
.name = "watchdog",
.id = -1,
......@@ -310,6 +316,12 @@ static struct clk init_clocks[] = {
.id = -1,
.parent = &clk_p,
.ctrlbit = S3C_CLKCON_PCLK_AC97,
}, {
.name = "cfcon",
.id = -1,
.parent = &clk_h,
.enable = s3c64xx_hclk_ctrl,
.ctrlbit = S3C_CLKCON_HCLK_IHOST,
}
};
......
arch/arm/mach-s3c64xx/dev-audio.c
浏览文件 @ 2192482e
......@@ -12,11 +12,11 @@
#include <linux/string.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <mach/irqs.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/gpio.h>
#include <plat/devs.h>
#include <plat/audio.h>
......
arch/arm/mach-s3c64xx/dev-spi.c
浏览文件 @ 2192482e
......@@ -12,10 +12,10 @@
#include <linux/string.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/map.h>
#include <mach/gpio.h>
#include <mach/gpio-bank-c.h>
#include <mach/spi-clocks.h>
......
arch/arm/mach-s3c64xx/gpiolib.c
浏览文件 @ 2192482e
......@@ -15,9 +15,9 @@
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <mach/map.h>
#include <mach/gpio.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
......
arch/arm/mach-s3c64xx/include/mach/map.h
浏览文件 @ 2192482e
......@@ -67,6 +67,7 @@
#define S3C64XX_PA_USB_HSOTG (0x7C000000)
#define S3C64XX_PA_WATCHDOG (0x7E004000)
#define S3C64XX_PA_RTC (0x7E005000)
#define S3C64XX_PA_KEYPAD (0x7E00A000)
#define S3C64XX_PA_ADC (0x7E00B000)
#define S3C64XX_PA_SYSCON (0x7E00F000)
#define S3C64XX_PA_AC97 (0x7F001000)
......@@ -86,6 +87,9 @@
#define S3C64XX_SZ_GPIO SZ_4K
#define S3C64XX_PA_SDRAM (0x50000000)
#define S3C64XX_PA_CFCON (0x70300000)
#define S3C64XX_PA_VIC0 (0x71200000)
#define S3C64XX_PA_VIC1 (0x71300000)
......@@ -120,5 +124,7 @@
#define S3C_PA_WDT S3C64XX_PA_WATCHDOG
#define SAMSUNG_PA_ADC S3C64XX_PA_ADC
#define SAMSUNG_PA_CFCON S3C64XX_PA_CFCON
#define SAMSUNG_PA_KEYPAD S3C64XX_PA_KEYPAD
#endif /* __ASM_ARCH_6400_MAP_H */
arch/arm/mach-s3c64xx/include/mach/regs-clock.h
浏览文件 @ 2192482e
......@@ -34,6 +34,7 @@
#define S3C_SCLK_GATE S3C_CLKREG(0x38)
#define S3C_MEM0_GATE S3C_CLKREG(0x3C)
#define S3C6410_CLK_SRC2 S3C_CLKREG(0x10C)
#define S3C_MEM_SYS_CFG S3C_CLKREG(0x120)
/* CLKDIV0 */
#define S3C6400_CLKDIV0_PCLK_MASK (0xf << 12)
......@@ -154,4 +155,8 @@
#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT (2)
#define S3C6400_CLKSRC_MFC (1 << 4)
/* MEM_SYS_CFG */
#define MEM_SYS_CFG_INDEP_CF 0x4000
#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON 0x30
#endif /* _PLAT_REGS_CLOCK_H */
arch/arm/mach-s3c64xx/mach-smdk6410.c
浏览文件 @ 2192482e
......@@ -17,6 +17,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
......@@ -56,6 +57,7 @@
#include <mach/regs-gpio.h>
#include <mach/regs-sys.h>
#include <mach/regs-srom.h>
#include <plat/ata.h>
#include <plat/iic.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
......@@ -66,6 +68,7 @@
#include <plat/cpu.h>
#include <plat/adc.h>
#include <plat/ts.h>
#include <plat/keypad.h>
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
......@@ -242,6 +245,29 @@ static struct platform_device smdk6410_b_pwr_5v = {
};
#endif
static struct s3c_ide_platdata smdk6410_ide_pdata __initdata = {
.setup_gpio = s3c64xx_ide_setup_gpio,
};
static uint32_t smdk6410_keymap[] __initdata = {
/* KEY(row, col, keycode) */
KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
};
static struct matrix_keymap_data smdk6410_keymap_data __initdata = {
.keymap = smdk6410_keymap,
.keymap_size = ARRAY_SIZE(smdk6410_keymap),
};
static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = {
.keymap_data = &smdk6410_keymap_data,
.rows = 2,
.cols = 8,
};
static struct map_desc smdk6410_iodesc[] = {};
static struct platform_device *smdk6410_devices[] __initdata = {
......@@ -257,6 +283,7 @@ static struct platform_device *smdk6410_devices[] __initdata = {
&s3c_device_ohci,
&s3c_device_usb_hsotg,
&s3c64xx_device_iisv4,
&samsung_device_keypad,
#ifdef CONFIG_REGULATOR
&smdk6410_b_pwr_5v,
......@@ -265,6 +292,8 @@ static struct platform_device *smdk6410_devices[] __initdata = {
&smdk6410_smsc911x,
&s3c_device_adc,
&s3c_device_cfcon,
&s3c_device_rtc,
&s3c_device_ts,
&s3c_device_wdt,
};
......@@ -636,6 +665,8 @@ static void __init smdk6410_machine_init(void)
s3c_i2c1_set_platdata(NULL);
s3c_fb_set_platdata(&smdk6410_lcd_pdata);
samsung_keypad_set_platdata(&smdk6410_keypad_data);
s3c24xx_ts_set_platdata(&s3c_ts_platform);
/* configure nCS1 width to 16 bits */
......@@ -665,6 +696,8 @@ static void __init smdk6410_machine_init(void)
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
s3c_ide_set_platdata(&smdk6410_ide_pdata);
platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
}
......
arch/arm/mach-s3c64xx/s3c6410.c
浏览文件 @ 2192482e
......@@ -37,8 +37,9 @@
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/sdhci.h>
#include <plat/ata-core.h>
#include <plat/adc-core.h>
#include <plat/iic-core.h>
#include <plat/adc.h>
#include <plat/onenand-core.h>
#include <mach/s3c6400.h>
#include <mach/s3c6410.h>
......@@ -54,10 +55,11 @@ void __init s3c6410_map_io(void)
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
s3c_device_adc.name = "s3c64xx-adc";
s3c_adc_setname("s3c64xx-adc");
s3c_device_nand.name = "s3c6400-nand";
s3c_onenand_setname("s3c6410-onenand");
s3c64xx_onenand1_setname("s3c6410-onenand");
s3c_cfcon_setname("s3c64xx-pata");
}
void __init s3c6410_init_clocks(int xtal)
......
arch/arm/mach-s3c64xx/setup-fb-24bpp.c
浏览文件 @ 2192482e
......@@ -15,9 +15,9 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <mach/regs-fb.h>
#include <mach/gpio.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
......
arch/arm/mach-s3c64xx/setup-i2c0.c
浏览文件 @ 2192482e
......@@ -14,10 +14,10 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/gpio.h>
struct platform_device; /* don't need the contents */
#include <mach/gpio.h>
#include <mach/gpio-bank-b.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
......
arch/arm/mach-s3c64xx/setup-i2c1.c
浏览文件 @ 2192482e
......@@ -14,10 +14,10 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/gpio.h>
struct platform_device; /* don't need the contents */
#include <mach/gpio.h>
#include <mach/gpio-bank-b.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
......
arch/arm/mach-s3c64xx/setup-ide.c 0 → 100644
浏览文件 @ 2192482e
/* linux/arch/arm/mach-s3c64xx/setup-ide.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* S3C64XX setup information for IDE
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <plat/gpio-cfg.h>
void s3c64xx_ide_setup_gpio(void)
{
u32 reg;
u32 gpio = 0;
reg = readl(S3C_MEM_SYS_CFG) & (~0x3f);
/* Independent CF interface, CF chip select configuration */
writel(reg | MEM_SYS_CFG_INDEP_CF |
MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S3C_MEM_SYS_CFG);
s3c_gpio_cfgpin(S3C64XX_GPB(4), S3C_GPIO_SFN(4));
/* Set XhiDATA[15:0] pins as CF Data[15:0] */
for (gpio = S3C64XX_GPK(0); gpio <= S3C64XX_GPK(15); gpio++)
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(5));
/* Set XhiADDR[2:0] pins as CF ADDR[2:0] */
for (gpio = S3C64XX_GPL(0); gpio <= S3C64XX_GPL(2); gpio++)
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(6));
/* Set Xhi ctrl pins as CF ctrl pins(IORDY, IOWR, IORD, CE[0:1]) */
s3c_gpio_cfgpin(S3C64XX_GPM(5), S3C_GPIO_SFN(1));
for (gpio = S3C64XX_GPM(0); gpio <= S3C64XX_GPM(4); gpio++)
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(6));
}
arch/arm/mach-s3c64xx/setup-keypad.c 0 → 100644
浏览文件 @ 2192482e
/* linux/arch/arm/mach-s3c64xx/setup-keypad.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* GPIO configuration for S3C64XX KeyPad device
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
{
unsigned int gpio;
unsigned int end;
/* Set all the necessary GPK pins to special-function 3: KP_ROW[x] */
end = S3C64XX_GPK(8 + rows);
for (gpio = S3C64XX_GPK(8); gpio < end; gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
/* Set all the necessary GPL pins to special-function 3: KP_COL[x] */
end = S3C64XX_GPL(0 + cols);
for (gpio = S3C64XX_GPL(0); gpio < end; gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
}
arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
浏览文件 @ 2192482e
......@@ -16,12 +16,14 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <mach/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/sdhci.h>
void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
unsigned int end;
......@@ -33,12 +35,15 @@ void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
}
}
void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
unsigned int end;
......@@ -50,8 +55,10 @@ void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
}
}
void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
......
arch/arm/mach-s5p6440/Kconfig
浏览文件 @ 2192482e
......@@ -13,13 +13,20 @@ config CPU_S5P6440
help
Enable S5P6440 CPU support
config S5P6440_SETUP_I2C1
bool
help
Common setup code for i2c bus 1.
config MACH_SMDK6440
bool "SMDK6440"
select CPU_S5P6440
select SAMSUNG_DEV_TS
select SAMSUNG_DEV_ADC
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_WDT
select HAVE_S3C2410_WATCHDOG
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_TS
select S5P6440_SETUP_I2C1
help
Machine support for the Samsung SMDK6440
......
arch/arm/mach-s5p6440/Makefile
浏览文件 @ 2192482e
......@@ -22,3 +22,4 @@ obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o
# device support
obj-y += dev-audio.o
obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
obj-$(CONFIG_S5P6440_SETUP_I2C1) += setup-i2c1.o
arch/arm/mach-s5p6440/cpu.c
浏览文件 @ 2192482e
......@@ -37,6 +37,7 @@
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/s5p6440.h>
#include <plat/adc-core.h>
static void s5p6440_idle(void)
{
......@@ -61,7 +62,7 @@ static void s5p6440_idle(void)
void __init s5p6440_map_io(void)
{
/* initialize any device information early */
s3c_device_adc.name = "s3c64xx-adc";
s3c_adc_setname("s3c64xx-adc");
}
void __init s5p6440_init_clocks(int xtal)
......
arch/arm/mach-s5p6440/dev-audio.c
浏览文件 @ 2192482e
......@@ -10,11 +10,11 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/audio.h>
#include <mach/gpio.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
......
arch/arm/mach-s5p6440/dev-spi.c
浏览文件 @ 2192482e
......@@ -10,11 +10,11 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <mach/gpio.h>
#include <mach/spi-clocks.h>
#include <plat/s3c64xx-spi.h>
......
arch/arm/mach-s5p6440/gpio.c
浏览文件 @ 2192482e
......@@ -13,9 +13,11 @@
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <mach/map.h>
#include <mach/gpio.h>
#include <mach/regs-gpio.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
......
arch/arm/mach-s5p6440/include/mach/irqs.h
浏览文件 @ 2192482e
......@@ -51,7 +51,7 @@
#define IRQ_DISPCON3 S5P_IRQ_VIC1(19)
#define IRQ_FIMGVG S5P_IRQ_VIC1(20)
#define IRQ_EINT_GROUPS S5P_IRQ_VIC1(21)
#define IRQ_PMUIRQ S5P_IRQ_VIC1(23)
#define IRQ_PMU S5P_IRQ_VIC1(23)
#define IRQ_HSMMC0 S5P_IRQ_VIC1(24)
#define IRQ_HSMMC1 S5P_IRQ_VIC1(25)
#define IRQ_HSMMC2 IRQ_SPI1 /* shared with SPI1 */
......
arch/arm/mach-s5p6440/include/mach/map.h
浏览文件 @ 2192482e
......@@ -38,7 +38,6 @@
#define S5P_PA_TIMER S5P6440_PA_TIMER
#define S5P6440_PA_RTC (0xEA100000)
#define S5P_PA_RTC S5P6440_PA_RTC
#define S5P6440_PA_WDT (0xEA200000)
#define S5P_PA_WDT S5P6440_PA_WDT
......@@ -53,6 +52,7 @@
#define S5P_SZ_UART SZ_256
#define S5P6440_PA_IIC0 (0xEC104000)
#define S5P6440_PA_IIC1 (0xEC20F000)
#define S5P6440_PA_SPI0 0xEC400000
#define S5P6440_PA_SPI1 0xEC500000
......@@ -77,6 +77,8 @@
/* compatibiltiy defines. */
#define S3C_PA_UART S5P6440_PA_UART
#define S3C_PA_IIC S5P6440_PA_IIC0
#define S3C_PA_RTC S5P6440_PA_RTC
#define S3C_PA_IIC1 S5P6440_PA_IIC1
#define S3C_PA_WDT S5P6440_PA_WDT
#define SAMSUNG_PA_ADC S5P6440_PA_ADC
......
arch/arm/mach-s5p6440/include/mach/system.h
浏览文件 @ 2192482e
......@@ -13,12 +13,9 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
static void arch_idle(void)
{
/* nothing here yet */
}
#include <plat/system-reset.h>
static void arch_reset(char mode, const char *cmd)
static void arch_idle(void)
{
/* nothing here yet */
}
......
arch/arm/mach-s5p6440/mach-smdk6440.c
浏览文件 @ 2192482e
......@@ -15,6 +15,7 @@
#include <linux/timer.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
......@@ -37,20 +38,21 @@
#include <mach/regs-clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/iic.h>
#include <plat/pll.h>
#include <plat/adc.h>
#include <plat/ts.h>
#define S5P6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
#define SMDK6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define S5P6440_ULCON_DEFAULT S3C2410_LCON_CS8
#define SMDK6440_ULCON_DEFAULT S3C2410_LCON_CS8
#define S5P6440_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
#define SMDK6440_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S3C2440_UFCON_TXTRIG16 | \
S3C2410_UFCON_RXTRIG8)
......@@ -58,40 +60,51 @@ static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = S5P6440_UCON_DEFAULT,
.ulcon = S5P6440_ULCON_DEFAULT,
.ufcon = S5P6440_UFCON_DEFAULT,
.ucon = SMDK6440_UCON_DEFAULT,
.ulcon = SMDK6440_ULCON_DEFAULT,
.ufcon = SMDK6440_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = S5P6440_UCON_DEFAULT,
.ulcon = S5P6440_ULCON_DEFAULT,
.ufcon = S5P6440_UFCON_DEFAULT,
.ucon = SMDK6440_UCON_DEFAULT,
.ulcon = SMDK6440_ULCON_DEFAULT,
.ufcon = SMDK6440_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = S5P6440_UCON_DEFAULT,
.ulcon = S5P6440_ULCON_DEFAULT,
.ufcon = S5P6440_UFCON_DEFAULT,
.ucon = SMDK6440_UCON_DEFAULT,
.ulcon = SMDK6440_ULCON_DEFAULT,
.ufcon = SMDK6440_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = S5P6440_UCON_DEFAULT,
.ulcon = S5P6440_ULCON_DEFAULT,
.ufcon = S5P6440_UFCON_DEFAULT,
.ucon = SMDK6440_UCON_DEFAULT,
.ulcon = SMDK6440_ULCON_DEFAULT,
.ufcon = SMDK6440_UFCON_DEFAULT,
},
};
static struct platform_device *smdk6440_devices[] __initdata = {
&s5p6440_device_iis,
&s3c_device_adc,
&s3c_device_rtc,
&s3c_device_i2c0,
&s3c_device_i2c1,
&s3c_device_ts,
&s3c_device_wdt,
};
static struct i2c_board_info smdk6440_i2c_devs0[] __initdata = {
{ I2C_BOARD_INFO("24c08", 0x50), },
};
static struct i2c_board_info smdk6440_i2c_devs1[] __initdata = {
/* To be populated */
};
static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
.delay = 10000,
.presc = 49,
......@@ -109,6 +122,14 @@ static void __init smdk6440_machine_init(void)
{
s3c24xx_ts_set_platdata(&s3c_ts_platform);
/* I2C */
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
i2c_register_board_info(0, smdk6440_i2c_devs0,
ARRAY_SIZE(smdk6440_i2c_devs0));
i2c_register_board_info(1, smdk6440_i2c_devs1,
ARRAY_SIZE(smdk6440_i2c_devs1));
platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
}
......
arch/arm/mach-s5p6440/setup-i2c0.c
浏览文件 @ 2192482e
......@@ -17,9 +17,14 @@
struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/iic.h>
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
/* Will be populated later */
s3c_gpio_cfgpin(S5P6440_GPB(5), S3C_GPIO_SFN(2));
s3c_gpio_setpull(S5P6440_GPB(5), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5P6440_GPB(6), S3C_GPIO_SFN(2));
s3c_gpio_setpull(S5P6440_GPB(6), S3C_GPIO_PULL_UP);
}
arch/arm/mach-s5p6440/setup-i2c1.c 0 → 100644
浏览文件 @ 2192482e
/* linux/arch/arm/mach-s5p6440/setup-i2c1.c
*
* Copyright (c) 2009 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* I2C1 GPIO configuration.
*
* Based on plat-s3c64xx/setup-i2c0.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/gpio.h>
struct platform_device; /* don't need the contents */
#include <plat/gpio-cfg.h>
#include <plat/iic.h>
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
{
s3c_gpio_cfgpin(S5P6440_GPR(9), S3C_GPIO_SFN(6));
s3c_gpio_setpull(S5P6440_GPR(9), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5P6440_GPR(10), S3C_GPIO_SFN(6));
s3c_gpio_setpull(S5P6440_GPR(10), S3C_GPIO_PULL_UP);
}
arch/arm/mach-s5p6442/Kconfig
浏览文件 @ 2192482e
......@@ -19,6 +19,7 @@ config CPU_S5P6442
config MACH_SMDK6442
bool "SMDK6442"
select CPU_S5P6442
select S3C_DEV_WDT
help
Machine support for Samsung SMDK6442
......
arch/arm/mach-s5p6442/clock.c
浏览文件 @ 2192482e
......@@ -360,6 +360,12 @@ static struct clk init_clocks[] = {
.parent = &clk_pclkd1,
.enable = s5p6442_clk_ip3_ctrl,
.ctrlbit = (1<<19),
}, {
.name = "watchdog",
.id = -1,
.parent = &clk_pclkd1,
.enable = s5p6442_clk_ip3_ctrl,
.ctrlbit = (1 << 22),
}, {
.name = "timers",
.id = -1,
......
arch/arm/mach-s5p6442/dev-audio.c
浏览文件 @ 2192482e
......@@ -10,11 +10,11 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/audio.h>
#include <mach/gpio.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
......
arch/arm/mach-s5p6442/dev-spi.c
浏览文件 @ 2192482e
......@@ -10,11 +10,11 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <mach/gpio.h>
#include <mach/spi-clocks.h>
#include <plat/s3c64xx-spi.h>
......
arch/arm/mach-s5p6442/include/mach/irqs.h
浏览文件 @ 2192482e
......@@ -32,7 +32,7 @@
#define IRQ_GPIOINT S5P_IRQ_VIC0(30)
/* VIC1 */
#define IRQ_nPMUIRQ S5P_IRQ_VIC1(0)
#define IRQ_PMU S5P_IRQ_VIC1(0)
#define IRQ_ONENAND S5P_IRQ_VIC1(7)
#define IRQ_UART0 S5P_IRQ_VIC1(10)
#define IRQ_UART1 S5P_IRQ_VIC1(11)
......
arch/arm/mach-s5p6442/include/mach/map.h
浏览文件 @ 2192482e
......@@ -42,6 +42,8 @@
#define S5P6442_PA_SYSTIMER (0xEA100000)
#define S5P6442_PA_WATCHDOG (0xEA200000)
#define S5P6442_PA_UART (0xEC000000)
#define S5P_PA_UART0 (S5P6442_PA_UART + 0x0)
......@@ -65,6 +67,7 @@
#define S5P6442_PA_PCM1 0xF2500000
/* compatibiltiy defines. */
#define S3C_PA_WDT S5P6442_PA_WATCHDOG
#define S3C_PA_UART S5P6442_PA_UART
#define S3C_PA_IIC S5P6442_PA_IIC0
......
arch/arm/mach-s5p6442/include/mach/system.h
浏览文件 @ 2192482e
......@@ -13,12 +13,9 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
static void arch_idle(void)
{
/* nothing here yet */
}
#include <plat/system-reset.h>
static void arch_reset(char mode, const char *cmd)
static void arch_idle(void)
{
/* nothing here yet */
}
......
arch/arm/mach-s5p6442/mach-smdk6442.c
浏览文件 @ 2192482e
......@@ -27,16 +27,16 @@
#include <plat/cpu.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define S5P6442_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
#define SMDK6442_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define S5P6442_ULCON_DEFAULT S3C2410_LCON_CS8
#define SMDK6442_ULCON_DEFAULT S3C2410_LCON_CS8
#define S5P6442_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
#define SMDK6442_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG4 | \
S5PV210_UFCON_RXTRIG4)
......@@ -44,28 +44,29 @@ static struct s3c2410_uartcfg smdk6442_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = S5P6442_UCON_DEFAULT,
.ulcon = S5P6442_ULCON_DEFAULT,
.ufcon = S5P6442_UFCON_DEFAULT,
.ucon = SMDK6442_UCON_DEFAULT,
.ulcon = SMDK6442_ULCON_DEFAULT,
.ufcon = SMDK6442_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = S5P6442_UCON_DEFAULT,
.ulcon = S5P6442_ULCON_DEFAULT,
.ufcon = S5P6442_UFCON_DEFAULT,
.ucon = SMDK6442_UCON_DEFAULT,
.ulcon = SMDK6442_ULCON_DEFAULT,
.ufcon = SMDK6442_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = S5P6442_UCON_DEFAULT,
.ulcon = S5P6442_ULCON_DEFAULT,
.ufcon = S5P6442_UFCON_DEFAULT,
.ucon = SMDK6442_UCON_DEFAULT,
.ulcon = SMDK6442_ULCON_DEFAULT,
.ufcon = SMDK6442_UFCON_DEFAULT,
},
};
static struct platform_device *smdk6442_devices[] __initdata = {
&s5p6442_device_iis0,
&s3c_device_wdt,
};
static void __init smdk6442_map_io(void)
......
arch/arm/mach-s5pc100/Kconfig
浏览文件 @ 2192482e
......@@ -25,6 +25,16 @@ config S5PC100_SETUP_I2C1
help
Common setup code for i2c bus 1.
config S5PC100_SETUP_IDE
bool
help
Common setup code for S5PC100 IDE GPIO configurations
config S5PC100_SETUP_KEYPAD
bool
help
Common setup code for KEYPAD GPIO configurations.
config S5PC100_SETUP_SDHCI
bool
select S5PC100_SETUP_SDHCI_GPIO
......@@ -40,13 +50,24 @@ config MACH_SMDKC100
bool "SMDKC100"
select CPU_S5PC100
select S3C_DEV_FB
select S3C_DEV_I2C1
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_WDT
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_IDE
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_TS
select S5PC100_SETUP_FB_24BPP
select S5PC100_SETUP_I2C1
select S5PC100_SETUP_IDE
select S5PC100_SETUP_KEYPAD
select S5PC100_SETUP_SDHCI
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
help
Machine support for the Samsung SMDKC100
......
arch/arm/mach-s5pc100/Makefile
浏览文件 @ 2192482e
......@@ -19,6 +19,8 @@ obj-$(CONFIG_CPU_S5PC100) += dma.o
obj-$(CONFIG_S5PC100_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S5PC100_SETUP_IDE) += setup-ide.o
obj-$(CONFIG_S5PC100_SETUP_KEYPAD) += setup-keypad.o
obj-$(CONFIG_S5PC100_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
......
arch/arm/mach-s5pc100/clock.c
浏览文件 @ 2192482e
......@@ -737,7 +737,7 @@ static struct clk init_clocks_disable[] = {
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 7),
}, {
.name = "keyif",
.name = "keypad",
.id = -1,
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_5_ctrl,
......@@ -1078,7 +1078,7 @@ static struct clksrc_clk clksrcs[] = {
.reg_div = { .reg = S5P_CLK_DIV3, .shift = 24, .size = 4 },
}, {
.clk = {
.name = "mmc_bus",
.name = "sclk_mmc",
.id = 0,
.ctrlbit = (1 << 12),
.enable = s5pc100_sclk1_ctrl,
......@@ -1089,7 +1089,7 @@ static struct clksrc_clk clksrcs[] = {
.reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
}, {
.clk = {
.name = "mmc_bus",
.name = "sclk_mmc",
.id = 1,
.ctrlbit = (1 << 13),
.enable = s5pc100_sclk1_ctrl,
......@@ -1100,7 +1100,7 @@ static struct clksrc_clk clksrcs[] = {
.reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
}, {
.clk = {
.name = "mmc_bus",
.name = "sclk_mmc",
.id = 2,
.ctrlbit = (1 << 14),
.enable = s5pc100_sclk1_ctrl,
......
arch/arm/mach-s5pc100/cpu.c
浏览文件 @ 2192482e
......@@ -38,8 +38,10 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/ata-core.h>
#include <plat/iic-core.h>
#include <plat/sdhci.h>
#include <plat/adc-core.h>
#include <plat/onenand-core.h>
#include <plat/s5pc100.h>
......@@ -87,11 +89,14 @@ void __init s5pc100_map_io(void)
s5pc100_default_sdhci1();
s5pc100_default_sdhci2();
s3c_adc_setname("s3c64xx-adc");
/* the i2c devices are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
s3c_onenand_setname("s5pc100-onenand");
s3c_cfcon_setname("s5pc100-pata");
}
void __init s5pc100_init_clocks(int xtal)
......
arch/arm/mach-s5pc100/dev-audio.c
浏览文件 @ 2192482e
......@@ -10,11 +10,11 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/audio.h>
#include <mach/gpio.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
......
arch/arm/mach-s5pc100/dev-spi.c
浏览文件 @ 2192482e
......@@ -10,10 +10,10 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/map.h>
#include <mach/gpio.h>
#include <mach/spi-clocks.h>
#include <plat/s3c64xx-spi.h>
......
arch/arm/mach-s5pc100/include/mach/irqs.h
浏览文件 @ 2192482e
......@@ -29,7 +29,7 @@
#define IRQ_GPIOINT S5P_IRQ_VIC0(30)
/* VIC1: ARM, power, memory, connectivity */
#define IRQ_CORTEX0 S5P_IRQ_VIC1(0)
#define IRQ_PMU S5P_IRQ_VIC1(0)
#define IRQ_CORTEX1 S5P_IRQ_VIC1(1)
#define IRQ_CORTEX2 S5P_IRQ_VIC1(2)
#define IRQ_CORTEX3 S5P_IRQ_VIC1(3)
......@@ -38,7 +38,7 @@
#define IRQ_IEMIEC S5P_IRQ_VIC1(6)
#define IRQ_ONENAND S5P_IRQ_VIC1(7)
#define IRQ_NFC S5P_IRQ_VIC1(8)
#define IRQ_CFC S5P_IRQ_VIC1(9)
#define IRQ_CFCON S5P_IRQ_VIC1(9)
#define IRQ_UART0 S5P_IRQ_VIC1(10)
#define IRQ_UART1 S5P_IRQ_VIC1(11)
#define IRQ_UART2 S5P_IRQ_VIC1(12)
......
arch/arm/mach-s5pc100/include/mach/map.h
浏览文件 @ 2192482e
......@@ -61,6 +61,8 @@
#define S5PC100_PA_ONENAND (0xE7100000)
#define S5PC100_PA_CFCON (0xE7800000)
/* DMA */
#define S5PC100_PA_MDMA (0xE8100000)
#define S5PC100_PA_PDMA0 (0xE9000000)
......@@ -72,6 +74,9 @@
#define S5PC100_PA_SYSTIMER (0xEA100000)
#define S5PC100_PA_WATCHDOG (0xEA200000)
#define S5PC100_PA_RTC (0xEA300000)
#define S5PC100_PA_UART (0xEC000000)
#define S5P_PA_UART0 (S5PC100_PA_UART + 0x0)
......@@ -94,6 +99,10 @@
#define S5PC100_PA_FB (0xEE000000)
#define S5PC100_PA_FIMC0 (0xEE200000)
#define S5PC100_PA_FIMC1 (0xEE300000)
#define S5PC100_PA_FIMC2 (0xEE400000)
#define S5PC100_PA_I2S0 (0xF2000000)
#define S5PC100_PA_I2S1 (0xF2100000)
#define S5PC100_PA_I2S2 (0xF2200000)
......@@ -104,6 +113,8 @@
#define S5PC100_PA_PCM0 0xF2400000
#define S5PC100_PA_PCM1 0xF2500000
#define S5PC100_PA_TSADC (0xF3000000)
/* KEYPAD */
#define S5PC100_PA_KEYPAD (0xF3100000)
......@@ -130,9 +141,19 @@
#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC(1)
#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC(2)
#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD
#define S3C_PA_WDT S5PC100_PA_WATCHDOG
#define S3C_PA_TSADC S5PC100_PA_TSADC
#define S3C_PA_ONENAND S5PC100_PA_ONENAND
#define S3C_PA_ONENAND_BUF S5PC100_PA_ONENAND_BUF
#define S3C_SZ_ONENAND_BUF S5PC100_SZ_ONENAND_BUF
#define S3C_PA_RTC S5PC100_PA_RTC
#define SAMSUNG_PA_ADC S5PC100_PA_TSADC
#define SAMSUNG_PA_CFCON S5PC100_PA_CFCON
#define SAMSUNG_PA_KEYPAD S5PC100_PA_KEYPAD
#define S5P_PA_FIMC0 S5PC100_PA_FIMC0
#define S5P_PA_FIMC1 S5PC100_PA_FIMC1
#define S5P_PA_FIMC2 S5PC100_PA_FIMC2
#endif /* __ASM_ARCH_C100_MAP_H */
arch/arm/mach-s5pc100/include/mach/regs-clock.h
浏览文件 @ 2192482e
......@@ -71,7 +71,10 @@
#define S5P_CLKDIV1_PCLKD1_SHIFT (16)
#define S5PC100_SWRESET S5PC100_REG_OTHERS(0x000)
#define S5PC100_MEM_SYS_CFG S5PC100_REG_OTHERS(0x200)
#define S5PC100_SWRESET_RESETVAL 0xc100
#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON 0x30
#endif /* __ASM_ARCH_REGS_CLOCK_H */
arch/arm/mach-s5pc100/include/mach/system.h
浏览文件 @ 2192482e
......@@ -11,18 +11,11 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
#include <linux/io.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <plat/system-reset.h>
static void arch_idle(void)
{
/* nothing here yet */
}
static void arch_reset(char mode, const char *cmd)
{
__raw_writel(S5PC100_SWRESET_RESETVAL, S5PC100_SWRESET);
return;
}
#endif /* __ASM_ARCH_IRQ_H */
arch/arm/mach-s5pc100/mach-smdkc100.c
浏览文件 @ 2192482e
......@@ -22,6 +22,7 @@
#include <linux/i2c.h>
#include <linux/fb.h>
#include <linux/delay.h>
#include <linux/input.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......@@ -42,18 +43,22 @@
#include <plat/s5pc100.h>
#include <plat/fb.h>
#include <plat/iic.h>
#include <plat/ata.h>
#include <plat/adc.h>
#include <plat/keypad.h>
#include <plat/ts.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define S5PC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
#define SMDKC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define S5PC100_ULCON_DEFAULT S3C2410_LCON_CS8
#define SMDKC100_ULCON_DEFAULT S3C2410_LCON_CS8
#define S5PC100_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
#define SMDKC100_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S3C2440_UFCON_RXTRIG8 | \
S3C2440_UFCON_TXTRIG16)
......@@ -61,30 +66,30 @@ static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = S5PC100_UCON_DEFAULT,
.ulcon = S5PC100_ULCON_DEFAULT,
.ufcon = S5PC100_UFCON_DEFAULT,
.ucon = SMDKC100_UCON_DEFAULT,
.ulcon = SMDKC100_ULCON_DEFAULT,
.ufcon = SMDKC100_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = S5PC100_UCON_DEFAULT,
.ulcon = S5PC100_ULCON_DEFAULT,
.ufcon = S5PC100_UFCON_DEFAULT,
.ucon = SMDKC100_UCON_DEFAULT,
.ulcon = SMDKC100_ULCON_DEFAULT,
.ufcon = SMDKC100_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = S5PC100_UCON_DEFAULT,
.ulcon = S5PC100_ULCON_DEFAULT,
.ufcon = S5PC100_UFCON_DEFAULT,
.ucon = SMDKC100_UCON_DEFAULT,
.ulcon = SMDKC100_ULCON_DEFAULT,
.ufcon = SMDKC100_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = S5PC100_UCON_DEFAULT,
.ulcon = S5PC100_ULCON_DEFAULT,
.ufcon = S5PC100_UFCON_DEFAULT,
.ucon = SMDKC100_UCON_DEFAULT,
.ulcon = SMDKC100_ULCON_DEFAULT,
.ufcon = SMDKC100_UFCON_DEFAULT,
},
};
......@@ -149,16 +154,54 @@ static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = {
.setup_gpio = s5pc100_fb_gpio_setup_24bpp,
};
static struct s3c_ide_platdata smdkc100_ide_pdata __initdata = {
.setup_gpio = s5pc100_ide_setup_gpio,
};
static uint32_t smdkc100_keymap[] __initdata = {
/* KEY(row, col, keycode) */
KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
};
static struct matrix_keymap_data smdkc100_keymap_data __initdata = {
.keymap = smdkc100_keymap,
.keymap_size = ARRAY_SIZE(smdkc100_keymap),
};
static struct samsung_keypad_platdata smdkc100_keypad_data __initdata = {
.keymap_data = &smdkc100_keymap_data,
.rows = 2,
.cols = 8,
};
static struct platform_device *smdkc100_devices[] __initdata = {
&s3c_device_adc,
&s3c_device_cfcon,
&s3c_device_i2c0,
&s3c_device_i2c1,
&s3c_device_fb,
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_hsmmc2,
&s3c_device_ts,
&s3c_device_wdt,
&smdkc100_lcd_powerdev,
&s5pc100_device_iis0,
&samsung_device_keypad,
&s5pc100_device_ac97,
&s3c_device_rtc,
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
};
static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
.delay = 10000,
.presc = 49,
.oversampling_shift = 2,
};
static void __init smdkc100_map_io(void)
......@@ -170,6 +213,8 @@ static void __init smdkc100_map_io(void)
static void __init smdkc100_machine_init(void)
{
s3c24xx_ts_set_platdata(&s3c_ts_platform);
/* I2C */
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
......@@ -177,6 +222,9 @@ static void __init smdkc100_machine_init(void)
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
s3c_fb_set_platdata(&smdkc100_lcd_pdata);
s3c_ide_set_platdata(&smdkc100_ide_pdata);
samsung_keypad_set_platdata(&smdkc100_keypad_data);
/* LCD init */
gpio_request(S5PC100_GPD(0), "GPD");
......
arch/arm/mach-s5pc100/setup-ide.c 0 → 100644
浏览文件 @ 2192482e
/* linux/arch/arm/mach-s5pc100/setup-ide.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* S5PC100 setup information for IDE
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <mach/regs-clock.h>
#include <plat/gpio-cfg.h>
void s5pc100_ide_setup_gpio(void)
{
u32 reg;
u32 gpio = 0;
/* Independent CF interface, CF chip select configuration */
reg = readl(S5PC100_MEM_SYS_CFG) & (~0x3f);
writel(reg | MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S5PC100_MEM_SYS_CFG);
/* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, CF_DMACK */
for (gpio = S5PC100_GPJ0(0); gpio <= S5PC100_GPJ0(7); gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
}
/*CF_Data[0 - 7] */
for (gpio = S5PC100_GPJ2(0); gpio <= S5PC100_GPJ2(7); gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
}
/* CF_Data[8 - 15] */
for (gpio = S5PC100_GPJ3(0); gpio <= S5PC100_GPJ3(7); gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
}
/* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */
for (gpio = S5PC100_GPJ4(0); gpio <= S5PC100_GPJ4(3); gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
}
/* EBI_OE, EBI_WE */
for (gpio = S5PC100_GPK0(6); gpio <= S5PC100_GPK0(7); gpio++)
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0));
/* CF_OE, CF_WE */
for (gpio = S5PC100_GPK1(6); gpio <= S5PC100_GPK1(7); gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
/* CF_CD */
s3c_gpio_cfgpin(S5PC100_GPK3(5), S3C_GPIO_SFN(2));
s3c_gpio_setpull(S5PC100_GPK3(5), S3C_GPIO_PULL_NONE);
}
arch/arm/mach-s5pc100/setup-keypad.c 0 → 100644
浏览文件 @ 2192482e
/* linux/arch/arm/mach-s5pc100/setup-keypad.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* GPIO configuration for S5PC100 KeyPad device
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
{
unsigned int gpio;
unsigned int end;
/* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */
end = S5PC100_GPH3(rows);
for (gpio = S5PC100_GPH3(0); gpio < end; gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
/* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */
end = S5PC100_GPH2(cols);
for (gpio = S5PC100_GPH2(0); gpio < end; gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
}
arch/arm/mach-s5pc100/setup-sdhci-gpio.c
浏览文件 @ 2192482e
......@@ -20,9 +20,11 @@
#include <plat/gpio-cfg.h>
#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>
void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
unsigned int end;
unsigned int num;
......@@ -47,12 +49,15 @@ void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
}
}
s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
}
}
void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
unsigned int end;
......@@ -64,12 +69,15 @@ void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
}
}
void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
unsigned int end;
......@@ -81,6 +89,8 @@ void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
}
}
arch/arm/mach-s5pc100/setup-sdhci.c
浏览文件 @ 2192482e
......@@ -26,10 +26,10 @@
/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
char *s5pc100_hsmmc_clksrcs[4] = {
[0] = "hsmmc",
[1] = "hsmmc",
/* [2] = "mmc_bus", not yet successfully used yet */
/* [3] = "48m", - note not successfully used yet */
[0] = "hsmmc", /* HCLK */
/* [1] = "hsmmc", - duplicate HCLK entry */
[2] = "sclk_mmc", /* mmc_bus */
/* [3] = "48m", - note not successfully used yet */
};
......
arch/arm/mach-s5pv210/Kconfig
浏览文件 @ 2192482e
......@@ -27,11 +27,21 @@ config S5PV210_SETUP_I2C2
help
Common setup code for i2c bus 2.
config S5PV210_SETUP_IDE
bool
help
Common setup code for S5PV210 IDE GPIO configurations
config S5PV210_SETUP_FB_24BPP
bool
help
Common setup code for S5PV210 with an 24bpp RGB display helper.
config S5PV210_SETUP_KEYPAD
bool
help
Common setup code for keypad.
config S5PV210_SETUP_SDHCI
bool
select S5PV210_SETUP_SDHCI_GPIO
......@@ -43,14 +53,27 @@ config S5PV210_SETUP_SDHCI_GPIO
help
Common setup code for SDHCI gpio.
# machine support
config S5PC110_DEV_ONENAND
bool
help
Compile in platform device definition for OneNAND1 controller
menu "S5PC110 Machines"
config MACH_AQUILA
bool "Samsung Aquila"
bool "Aquila"
select CPU_S5PV210
select ARCH_SPARSEMEM_ENABLE
select S5PV210_SETUP_FB_24BPP
select S3C_DEV_FB
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S5PC110_DEV_ONENAND
select S5PV210_SETUP_FB_24BPP
select S5PV210_SETUP_SDHCI
help
Machine support for the Samsung Aquila target based on S5PC110 SoC
......@@ -58,34 +81,64 @@ config MACH_GONI
bool "GONI"
select CPU_S5PV210
select ARCH_SPARSEMEM_ENABLE
select S3C_DEV_FB
select S5P_DEV_FIMC0
select S5P_DEV_FIMC1
select S5P_DEV_FIMC2
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S5PC110_DEV_ONENAND
select S5PV210_SETUP_FB_24BPP
select S5PV210_SETUP_SDHCI
help
Machine support for Samsung GONI board
S5PC110(MCP) is one of package option of S5PV210
config S5PC110_DEV_ONENAND
bool
config MACH_SMDKC110
bool "SMDKC110"
select CPU_S5PV210
select ARCH_SPARSEMEM_ENABLE
select S3C_DEV_I2C1
select S3C_DEV_I2C2
select S3C_DEV_RTC
select S3C_DEV_WDT
select SAMSUNG_DEV_IDE
select S5PV210_SETUP_I2C1
select S5PV210_SETUP_I2C2
select S5PV210_SETUP_IDE
help
Compile in platform device definition for OneNAND1 controller
Machine support for Samsung SMDKC110
S5PC110(MCP) is one of package option of S5PV210
endmenu
menu "S5PV210 Machines"
config MACH_SMDKV210
bool "SMDKV210"
select CPU_S5PV210
select ARCH_SPARSEMEM_ENABLE
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S3C_DEV_I2C1
select S3C_DEV_I2C2
select S3C_DEV_RTC
select S3C_DEV_WDT
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_IDE
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_TS
select S3C_DEV_WDT
select HAVE_S3C2410_WATCHDOG
select S5PV210_SETUP_I2C1
select S5PV210_SETUP_I2C2
select S5PV210_SETUP_IDE
select S5PV210_SETUP_KEYPAD
select S5PV210_SETUP_SDHCI
help
Machine support for Samsung SMDKV210
config MACH_SMDKC110
bool "SMDKC110"
select CPU_S5PV210
select ARCH_SPARSEMEM_ENABLE
select S3C_DEV_WDT
select HAVE_S3C2410_WATCHDOG
help
Machine support for Samsung SMDKC110
S5PC110(MCP) is one of package option of S5PV210
endmenu
endif
arch/arm/mach-s5pv210/Makefile
浏览文件 @ 2192482e
......@@ -31,5 +31,7 @@ obj-$(CONFIG_S5PC110_DEV_ONENAND) += dev-onenand.o
obj-$(CONFIG_S5PV210_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S5PV210_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S5PV210_SETUP_I2C2) += setup-i2c2.o
obj-$(CONFIG_S5PV210_SETUP_IDE) += setup-ide.o
obj-$(CONFIG_S5PV210_SETUP_KEYPAD) += setup-keypad.o
obj-$(CONFIG_S5PV210_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
arch/arm/mach-s5pv210/cpu.c
浏览文件 @ 2192482e
......@@ -32,8 +32,13 @@
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/s5pv210.h>
#include <plat/adc-core.h>
#include <plat/ata-core.h>
#include <plat/fimc-core.h>
#include <plat/iic-core.h>
#include <plat/keypad-core.h>
#include <plat/sdhci.h>
#include <plat/reset.h>
/* Initial IO mappings */
......@@ -69,6 +74,11 @@ static void s5pv210_idle(void)
local_irq_enable();
}
static void s5pv210_sw_reset(void)
{
__raw_writel(0x1, S5P_SWRESET);
}
/* s5pv210_map_io
*
* register the standard cpu IO areas
......@@ -76,21 +86,29 @@ static void s5pv210_idle(void)
void __init s5pv210_map_io(void)
{
#ifdef CONFIG_S3C_DEV_ADC
s3c_device_adc.name = "s3c64xx-adc";
#endif
iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
/* initialise device information early */
s5pv210_default_sdhci0();
s5pv210_default_sdhci1();
s5pv210_default_sdhci2();
s5pv210_default_sdhci3();
s3c_adc_setname("s3c64xx-adc");
s3c_cfcon_setname("s5pv210-pata");
s3c_fimc_setname(0, "s5pv210-fimc");
s3c_fimc_setname(1, "s5pv210-fimc");
s3c_fimc_setname(2, "s5pv210-fimc");
/* the i2c devices are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
s3c_i2c2_setname("s3c2440-i2c");
/* Use s5pv210-keypad instead of samsung-keypad */
samsung_keypad_setname("s5pv210-keypad");
}
void __init s5pv210_init_clocks(int xtal)
......@@ -138,5 +156,8 @@ int __init s5pv210_init(void)
/* set idle function */
pm_idle = s5pv210_idle;
/* set sw_reset function */
s5p_reset_hook = s5pv210_sw_reset;
return sysdev_register(&s5pv210_sysdev);
}
arch/arm/mach-s5pv210/dev-audio.c
浏览文件 @ 2192482e
......@@ -10,11 +10,11 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/audio.h>
#include <mach/gpio.h>
#include <mach/map.h>
#include <mach/dma.h>
#include <mach/irqs.h>
......
arch/arm/mach-s5pv210/dev-onenand.c
浏览文件 @ 2192482e
......@@ -27,9 +27,14 @@ static struct resource s5pc110_onenand_resources[] = {
},
[1] = {
.start = S5PC110_PA_ONENAND_DMA,
.end = S5PC110_PA_ONENAND_DMA + SZ_2K - 1,
.end = S5PC110_PA_ONENAND_DMA + SZ_8K - 1,
.flags = IORESOURCE_MEM,
},
[2] = {
.start = IRQ_ONENAND_AUDI,
.end = IRQ_ONENAND_AUDI,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device s5pc110_device_onenand = {
......
arch/arm/mach-s5pv210/dev-spi.c
浏览文件 @ 2192482e
......@@ -10,11 +10,11 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <mach/gpio.h>
#include <mach/spi-clocks.h>
#include <plat/s3c64xx-spi.h>
......
arch/arm/mach-s5pv210/gpiolib.c
浏览文件 @ 2192482e
......@@ -206,6 +206,20 @@ static struct s3c_gpio_chip s5pv210_gpio_4bit[] = {
.ngpio = S5PV210_GPIO_MP03_NR,
.label = "MP03",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = S5PV210_MP04(0),
.ngpio = S5PV210_GPIO_MP04_NR,
.label = "MP04",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = S5PV210_MP05(0),
.ngpio = S5PV210_GPIO_MP05_NR,
.label = "MP05",
},
}, {
.base = (S5P_VA_GPIO + 0xC00),
.config = &gpio_cfg_noint,
......
arch/arm/mach-s5pv210/include/mach/gpio.h
浏览文件 @ 2192482e
......@@ -52,6 +52,8 @@
#define S5PV210_GPIO_MP01_NR (8)
#define S5PV210_GPIO_MP02_NR (4)
#define S5PV210_GPIO_MP03_NR (8)
#define S5PV210_GPIO_MP04_NR (8)
#define S5PV210_GPIO_MP05_NR (8)
/* GPIO bank numbers */
......@@ -94,6 +96,8 @@ enum s5p_gpio_number {
S5PV210_GPIO_MP01_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J4),
S5PV210_GPIO_MP02_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP01),
S5PV210_GPIO_MP03_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP02),
S5PV210_GPIO_MP04_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP03),
S5PV210_GPIO_MP05_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP04),
};
/* S5PV210 GPIO number definitions */
......@@ -127,13 +131,15 @@ enum s5p_gpio_number {
#define S5PV210_MP01(_nr) (S5PV210_GPIO_MP01_START + (_nr))
#define S5PV210_MP02(_nr) (S5PV210_GPIO_MP02_START + (_nr))
#define S5PV210_MP03(_nr) (S5PV210_GPIO_MP03_START + (_nr))
#define S5PV210_MP04(_nr) (S5PV210_GPIO_MP04_START + (_nr))
#define S5PV210_MP05(_nr) (S5PV210_GPIO_MP05_START + (_nr))
/* the end of the S5PV210 specific gpios */
#define S5PV210_GPIO_END (S5PV210_MP03(S5PV210_GPIO_MP03_NR) + 1)
#define S5PV210_GPIO_END (S5PV210_MP05(S5PV210_GPIO_MP05_NR) + 1)
#define S3C_GPIO_END S5PV210_GPIO_END
/* define the number of gpios we need to the one after the MP03() range */
#define ARCH_NR_GPIOS (S5PV210_MP03(S5PV210_GPIO_MP03_NR) + \
/* define the number of gpios we need to the one after the MP05() range */
#define ARCH_NR_GPIOS (S5PV210_MP05(S5PV210_GPIO_MP05_NR) + \
CONFIG_SAMSUNG_GPIO_EXTRA + 1)
#include <asm-generic/gpio.h>
......
arch/arm/mach-s5pv210/include/mach/irqs.h
浏览文件 @ 2192482e
......@@ -36,7 +36,7 @@
/* VIC1: ARM, Power, Memory, Connectivity, Storage */
#define IRQ_CORTEX0 S5P_IRQ_VIC1(0)
#define IRQ_PMU S5P_IRQ_VIC1(0)
#define IRQ_CORTEX1 S5P_IRQ_VIC1(1)
#define IRQ_CORTEX2 S5P_IRQ_VIC1(2)
#define IRQ_CORTEX3 S5P_IRQ_VIC1(3)
......@@ -45,7 +45,7 @@
#define IRQ_IEMIEC S5P_IRQ_VIC1(6)
#define IRQ_ONENAND S5P_IRQ_VIC1(7)
#define IRQ_NFC S5P_IRQ_VIC1(8)
#define IRQ_CFC S5P_IRQ_VIC1(9)
#define IRQ_CFCON S5P_IRQ_VIC1(9)
#define IRQ_UART0 S5P_IRQ_VIC1(10)
#define IRQ_UART1 S5P_IRQ_VIC1(11)
#define IRQ_UART2 S5P_IRQ_VIC1(12)
......
arch/arm/mach-s5pv210/include/mach/map.h
浏览文件 @ 2192482e
......@@ -32,6 +32,8 @@
#define S5PV210_PA_SPI0 0xE1300000
#define S5PV210_PA_SPI1 0xE1400000
#define S5PV210_PA_KEYPAD (0xE1600000)
#define S5PV210_PA_IIC0 (0xE1800000)
#define S5PV210_PA_IIC1 (0xFAB00000)
#define S5PV210_PA_IIC2 (0xE1A00000)
......@@ -43,6 +45,7 @@
#define S5PV210_PA_WATCHDOG (0xE2700000)
#define S5PV210_PA_RTC (0xE2800000)
#define S5PV210_PA_UART (0xE2900000)
#define S5P_PA_UART0 (S5PV210_PA_UART + 0x0)
......@@ -54,12 +57,18 @@
#define S5PV210_PA_SROMC (0xE8000000)
#define S5PV210_PA_CFCON (0xE8200000)
#define S5PV210_PA_MDMA 0xFA200000
#define S5PV210_PA_PDMA0 0xE0900000
#define S5PV210_PA_PDMA1 0xE0A00000
#define S5PV210_PA_FB (0xF8000000)
#define S5PV210_PA_FIMC0 (0xFB200000)
#define S5PV210_PA_FIMC1 (0xFB300000)
#define S5PV210_PA_FIMC2 (0xFB400000)
#define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000))
#define S5PV210_PA_VIC0 (0xF2000000)
......@@ -97,12 +106,19 @@
#define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0)
#define S3C_PA_HSMMC1 S5PV210_PA_HSMMC(1)
#define S3C_PA_HSMMC2 S5PV210_PA_HSMMC(2)
#define S3C_PA_HSMMC3 S5PV210_PA_HSMMC(3)
#define S3C_PA_IIC S5PV210_PA_IIC0
#define S3C_PA_IIC1 S5PV210_PA_IIC1
#define S3C_PA_IIC2 S5PV210_PA_IIC2
#define S3C_PA_FB S5PV210_PA_FB
#define S3C_PA_RTC S5PV210_PA_RTC
#define S3C_PA_WDT S5PV210_PA_WATCHDOG
#define S5P_PA_FIMC0 S5PV210_PA_FIMC0
#define S5P_PA_FIMC1 S5PV210_PA_FIMC1
#define S5P_PA_FIMC2 S5PV210_PA_FIMC2
#define SAMSUNG_PA_ADC S5PV210_PA_ADC
#define SAMSUNG_PA_CFCON S5PV210_PA_CFCON
#define SAMSUNG_PA_KEYPAD S5PV210_PA_KEYPAD
#endif /* __ASM_ARCH_MAP_H */
arch/arm/mach-s5pv210/include/mach/memory.h
浏览文件 @ 2192482e
......@@ -16,8 +16,13 @@
#define PHYS_OFFSET UL(0x20000000)
#define CONSISTENT_DMA_SIZE (SZ_8M + SZ_4M + SZ_2M)
/* Maximum of 256MiB in one bank */
#define MAX_PHYSMEM_BITS 32
/*
* Sparsemem support
* Physical memory can be located from 0x20000000 to 0x7fffffff,
* so MAX_PHYSMEM_BITS is 31.
*/
#define MAX_PHYSMEM_BITS 31
#define SECTION_SIZE_BITS 28
#endif /* __ASM_ARCH_MEMORY_H */
arch/arm/mach-s5pv210/include/mach/regs-clock.h
浏览文件 @ 2192482e
......@@ -90,6 +90,8 @@
#define S5P_CLKDIV0_PCLK66_SHIFT (28)
#define S5P_CLKDIV0_PCLK66_MASK (0x7 << S5P_CLKDIV0_PCLK66_SHIFT)
#define S5P_SWRESET S5P_CLKREG(0x2000)
/* Registers related to power management */
#define S5P_PWR_CFG S5P_CLKREG(0xC000)
#define S5P_EINT_WAKEUP_MASK S5P_CLKREG(0xC004)
......
arch/arm/mach-s5pv210/include/mach/system.h
浏览文件 @ 2192482e
......@@ -13,12 +13,9 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
static void arch_idle(void)
{
/* nothing here yet */
}
#include <plat/system-reset.h>
static void arch_reset(char mode, const char *cmd)
static void arch_idle(void)
{
/* nothing here yet */
}
......
arch/arm/mach-s5pv210/mach-aquila.c
浏览文件 @ 2192482e
......@@ -13,6 +13,12 @@
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/fb.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <linux/mfd/max8998.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......@@ -23,54 +29,63 @@
#include <mach/regs-clock.h>
#include <mach/regs-fb.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
#include <plat/s5pv210.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
#include <plat/fimc-core.h>
#include <plat/sdhci.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
#define AQUILA_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8
#define AQUILA_ULCON_DEFAULT S3C2410_LCON_CS8
#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG4 | \
S5PV210_UFCON_RXTRIG4)
#define AQUILA_UFCON_DEFAULT S3C2410_UFCON_FIFOMODE
static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
static struct s3c2410_uartcfg aquila_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
.ucon = AQUILA_UCON_DEFAULT,
.ulcon = AQUILA_ULCON_DEFAULT,
/*
* Actually UART0 can support 256 bytes fifo, but aquila board
* supports 128 bytes fifo because of initial chip bug
*/
.ufcon = AQUILA_UFCON_DEFAULT |
S5PV210_UFCON_TXTRIG128 | S5PV210_UFCON_RXTRIG128,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
.ucon = AQUILA_UCON_DEFAULT,
.ulcon = AQUILA_ULCON_DEFAULT,
.ufcon = AQUILA_UFCON_DEFAULT |
S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
.ucon = AQUILA_UCON_DEFAULT,
.ulcon = AQUILA_ULCON_DEFAULT,
.ufcon = AQUILA_UFCON_DEFAULT |
S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
.ucon = AQUILA_UCON_DEFAULT,
.ulcon = AQUILA_ULCON_DEFAULT,
.ufcon = AQUILA_UFCON_DEFAULT |
S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
},
};
......@@ -116,19 +131,383 @@ static struct s3c_fb_platdata aquila_lcd_pdata __initdata = {
.setup_gpio = s5pv210_fb_gpio_setup_24bpp,
};
/* MAX8998 regulators */
#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
static struct regulator_init_data aquila_ldo2_data = {
.constraints = {
.name = "VALIVE_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
};
static struct regulator_init_data aquila_ldo3_data = {
.constraints = {
.name = "VUSB/MIPI_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data aquila_ldo4_data = {
.constraints = {
.name = "VDAC_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
},
};
static struct regulator_init_data aquila_ldo5_data = {
.constraints = {
.name = "VTF_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
},
};
static struct regulator_init_data aquila_ldo6_data = {
.constraints = {
.name = "VCC_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
},
};
static struct regulator_init_data aquila_ldo7_data = {
.constraints = {
.name = "VCC_3.0V",
.min_uV = 3000000,
.max_uV = 3000000,
.apply_uV = 1,
.boot_on = 1,
.always_on = 1,
},
};
static struct regulator_init_data aquila_ldo8_data = {
.constraints = {
.name = "VUSB/VADC_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data aquila_ldo9_data = {
.constraints = {
.name = "VCC/VCAM_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data aquila_ldo10_data = {
.constraints = {
.name = "VPLL_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
.boot_on = 1,
},
};
static struct regulator_init_data aquila_ldo11_data = {
.constraints = {
.name = "CAM_IO_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data aquila_ldo12_data = {
.constraints = {
.name = "CAM_ISP_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data aquila_ldo13_data = {
.constraints = {
.name = "CAM_A_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data aquila_ldo14_data = {
.constraints = {
.name = "CAM_CIF_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data aquila_ldo15_data = {
.constraints = {
.name = "CAM_AF_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data aquila_ldo16_data = {
.constraints = {
.name = "VMIPI_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data aquila_ldo17_data = {
.constraints = {
.name = "CAM_8M_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.always_on = 1,
},
};
/* BUCK */
static struct regulator_consumer_supply buck1_consumer[] = {
{ .supply = "vddarm", },
};
static struct regulator_consumer_supply buck2_consumer[] = {
{ .supply = "vddint", },
};
static struct regulator_init_data aquila_buck1_data = {
.constraints = {
.name = "VARM_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(buck1_consumer),
.consumer_supplies = buck1_consumer,
};
static struct regulator_init_data aquila_buck2_data = {
.constraints = {
.name = "VINT_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(buck2_consumer),
.consumer_supplies = buck2_consumer,
};
static struct regulator_init_data aquila_buck3_data = {
.constraints = {
.name = "VCC_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.state_mem = {
.enabled = 1,
},
},
};
static struct regulator_init_data aquila_buck4_data = {
.constraints = {
.name = "CAM_CORE_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct max8998_regulator_data aquila_regulators[] = {
{ MAX8998_LDO2, &aquila_ldo2_data },
{ MAX8998_LDO3, &aquila_ldo3_data },
{ MAX8998_LDO4, &aquila_ldo4_data },
{ MAX8998_LDO5, &aquila_ldo5_data },
{ MAX8998_LDO6, &aquila_ldo6_data },
{ MAX8998_LDO7, &aquila_ldo7_data },
{ MAX8998_LDO8, &aquila_ldo8_data },
{ MAX8998_LDO9, &aquila_ldo9_data },
{ MAX8998_LDO10, &aquila_ldo10_data },
{ MAX8998_LDO11, &aquila_ldo11_data },
{ MAX8998_LDO12, &aquila_ldo12_data },
{ MAX8998_LDO13, &aquila_ldo13_data },
{ MAX8998_LDO14, &aquila_ldo14_data },
{ MAX8998_LDO15, &aquila_ldo15_data },
{ MAX8998_LDO16, &aquila_ldo16_data },
{ MAX8998_LDO17, &aquila_ldo17_data },
{ MAX8998_BUCK1, &aquila_buck1_data },
{ MAX8998_BUCK2, &aquila_buck2_data },
{ MAX8998_BUCK3, &aquila_buck3_data },
{ MAX8998_BUCK4, &aquila_buck4_data },
};
static struct max8998_platform_data aquila_max8998_pdata = {
.num_regulators = ARRAY_SIZE(aquila_regulators),
.regulators = aquila_regulators,
};
#endif
/* GPIO I2C PMIC */
#define AP_I2C_GPIO_PMIC_BUS_4 4
static struct i2c_gpio_platform_data aquila_i2c_gpio_pmic_data = {
.sda_pin = S5PV210_GPJ4(0), /* XMSMCSN */
.scl_pin = S5PV210_GPJ4(3), /* XMSMIRQN */
};
static struct platform_device aquila_i2c_gpio_pmic = {
.name = "i2c-gpio",
.id = AP_I2C_GPIO_PMIC_BUS_4,
.dev = {
.platform_data = &aquila_i2c_gpio_pmic_data,
},
};
static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = {
#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
{
/* 0xCC when SRAD = 0 */
I2C_BOARD_INFO("max8998", 0xCC >> 1),
.platform_data = &aquila_max8998_pdata,
},
#endif
};
/* PMIC Power button */
static struct gpio_keys_button aquila_gpio_keys_table[] = {
{
.code = KEY_POWER,
.gpio = S5PV210_GPH2(6),
.desc = "gpio-keys: KEY_POWER",
.type = EV_KEY,
.active_low = 1,
.wakeup = 1,
.debounce_interval = 1,
},
};
static struct gpio_keys_platform_data aquila_gpio_keys_data = {
.buttons = aquila_gpio_keys_table,
.nbuttons = ARRAY_SIZE(aquila_gpio_keys_table),
};
static struct platform_device aquila_device_gpiokeys = {
.name = "gpio-keys",
.dev = {
.platform_data = &aquila_gpio_keys_data,
},
};
static void __init aquila_pmic_init(void)
{
/* AP_PMIC_IRQ: EINT7 */
s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf));
s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP);
/* nPower: EINT22 */
s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf));
s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP);
}
/* MoviNAND */
static struct s3c_sdhci_platdata aquila_hsmmc0_data __initdata = {
.max_width = 4,
.cd_type = S3C_SDHCI_CD_PERMANENT,
};
/* Wireless LAN */
static struct s3c_sdhci_platdata aquila_hsmmc1_data __initdata = {
.max_width = 4,
.cd_type = S3C_SDHCI_CD_EXTERNAL,
/* ext_cd_{init,cleanup} callbacks will be added later */
};
/* External Flash */
#define AQUILA_EXT_FLASH_EN S5PV210_MP05(4)
#define AQUILA_EXT_FLASH_CD S5PV210_GPH3(4)
static struct s3c_sdhci_platdata aquila_hsmmc2_data __initdata = {
.max_width = 4,
.cd_type = S3C_SDHCI_CD_GPIO,
.ext_cd_gpio = AQUILA_EXT_FLASH_CD,
.ext_cd_gpio_invert = 1,
};
static void aquila_setup_sdhci(void)
{
gpio_request(AQUILA_EXT_FLASH_EN, "FLASH_EN");
gpio_direction_output(AQUILA_EXT_FLASH_EN, 1);
s3c_sdhci0_set_platdata(&aquila_hsmmc0_data);
s3c_sdhci1_set_platdata(&aquila_hsmmc1_data);
s3c_sdhci2_set_platdata(&aquila_hsmmc2_data);
};
static struct platform_device *aquila_devices[] __initdata = {
&aquila_i2c_gpio_pmic,
&aquila_device_gpiokeys,
&s3c_device_fb,
&s5pc110_device_onenand,
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_hsmmc2,
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
};
static void __init aquila_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs));
}
static void __init aquila_machine_init(void)
{
/* PMIC */
aquila_pmic_init();
i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
ARRAY_SIZE(i2c_gpio_pmic_devs));
/* SDHCI */
aquila_setup_sdhci();
s3c_fimc_setname(0, "s5p-fimc");
s3c_fimc_setname(1, "s5p-fimc");
s3c_fimc_setname(2, "s5p-fimc");
/* FB */
s3c_fb_set_platdata(&aquila_lcd_pdata);
......
arch/arm/mach-s5pv210/mach-goni.c
浏览文件 @ 2192482e
......@@ -12,6 +12,13 @@
#include <linux/types.h>
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/fb.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <linux/mfd/max8998.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......@@ -20,58 +27,444 @@
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <mach/regs-fb.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
#include <plat/s5pv210.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
#include <plat/sdhci.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
#define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8
#define GONI_ULCON_DEFAULT S3C2410_LCON_CS8
#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG4 | \
S5PV210_UFCON_RXTRIG4)
#define GONI_UFCON_DEFAULT S3C2410_UFCON_FIFOMODE
static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
.ucon = GONI_UCON_DEFAULT,
.ulcon = GONI_ULCON_DEFAULT,
.ufcon = GONI_UFCON_DEFAULT |
S5PV210_UFCON_TXTRIG256 | S5PV210_UFCON_RXTRIG256,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
.ucon = GONI_UCON_DEFAULT,
.ulcon = GONI_ULCON_DEFAULT,
.ufcon = GONI_UFCON_DEFAULT |
S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
.ucon = GONI_UCON_DEFAULT,
.ulcon = GONI_ULCON_DEFAULT,
.ufcon = GONI_UFCON_DEFAULT |
S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
.ucon = GONI_UCON_DEFAULT,
.ulcon = GONI_ULCON_DEFAULT,
.ufcon = GONI_UFCON_DEFAULT |
S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
},
};
/* Frame Buffer */
static struct s3c_fb_pd_win goni_fb_win0 = {
.win_mode = {
.pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*55),
.left_margin = 16,
.right_margin = 16,
.upper_margin = 3,
.lower_margin = 28,
.hsync_len = 2,
.vsync_len = 2,
.xres = 480,
.yres = 800,
.refresh = 55,
},
.max_bpp = 32,
.default_bpp = 16,
};
static struct s3c_fb_platdata goni_lcd_pdata __initdata = {
.win[0] = &goni_fb_win0,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
VIDCON0_CLKSEL_LCD,
.vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
| VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
.setup_gpio = s5pv210_fb_gpio_setup_24bpp,
};
/* MAX8998 regulators */
#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
static struct regulator_init_data goni_ldo2_data = {
.constraints = {
.name = "VALIVE_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
};
static struct regulator_init_data goni_ldo3_data = {
.constraints = {
.name = "VUSB/MIPI_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data goni_ldo4_data = {
.constraints = {
.name = "VDAC_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
},
};
static struct regulator_init_data goni_ldo5_data = {
.constraints = {
.name = "VTF_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
},
};
static struct regulator_init_data goni_ldo6_data = {
.constraints = {
.name = "VCC_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
},
};
static struct regulator_init_data goni_ldo7_data = {
.constraints = {
.name = "VLCD_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data goni_ldo8_data = {
.constraints = {
.name = "VUSB/VADC_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data goni_ldo9_data = {
.constraints = {
.name = "VCC/VCAM_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data goni_ldo10_data = {
.constraints = {
.name = "VPLL_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
.boot_on = 1,
},
};
static struct regulator_init_data goni_ldo11_data = {
.constraints = {
.name = "CAM_IO_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data goni_ldo12_data = {
.constraints = {
.name = "CAM_ISP_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data goni_ldo13_data = {
.constraints = {
.name = "CAM_A_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data goni_ldo14_data = {
.constraints = {
.name = "CAM_CIF_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data goni_ldo15_data = {
.constraints = {
.name = "CAM_AF_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data goni_ldo16_data = {
.constraints = {
.name = "VMIPI_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct regulator_init_data goni_ldo17_data = {
.constraints = {
.name = "VCC_3.0V_LCD",
.min_uV = 3000000,
.max_uV = 3000000,
.apply_uV = 1,
.always_on = 1,
},
};
/* BUCK */
static struct regulator_consumer_supply buck1_consumer[] = {
{ .supply = "vddarm", },
};
static struct regulator_consumer_supply buck2_consumer[] = {
{ .supply = "vddint", },
};
static struct regulator_init_data goni_buck1_data = {
.constraints = {
.name = "VARM_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(buck1_consumer),
.consumer_supplies = buck1_consumer,
};
static struct regulator_init_data goni_buck2_data = {
.constraints = {
.name = "VINT_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(buck2_consumer),
.consumer_supplies = buck2_consumer,
};
static struct regulator_init_data goni_buck3_data = {
.constraints = {
.name = "VCC_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.state_mem = {
.enabled = 1,
},
},
};
static struct regulator_init_data goni_buck4_data = {
.constraints = {
.name = "CAM_CORE_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.always_on = 1,
},
};
static struct max8998_regulator_data goni_regulators[] = {
{ MAX8998_LDO2, &goni_ldo2_data },
{ MAX8998_LDO3, &goni_ldo3_data },
{ MAX8998_LDO4, &goni_ldo4_data },
{ MAX8998_LDO5, &goni_ldo5_data },
{ MAX8998_LDO6, &goni_ldo6_data },
{ MAX8998_LDO7, &goni_ldo7_data },
{ MAX8998_LDO8, &goni_ldo8_data },
{ MAX8998_LDO9, &goni_ldo9_data },
{ MAX8998_LDO10, &goni_ldo10_data },
{ MAX8998_LDO11, &goni_ldo11_data },
{ MAX8998_LDO12, &goni_ldo12_data },
{ MAX8998_LDO13, &goni_ldo13_data },
{ MAX8998_LDO14, &goni_ldo14_data },
{ MAX8998_LDO15, &goni_ldo15_data },
{ MAX8998_LDO16, &goni_ldo16_data },
{ MAX8998_LDO17, &goni_ldo17_data },
{ MAX8998_BUCK1, &goni_buck1_data },
{ MAX8998_BUCK2, &goni_buck2_data },
{ MAX8998_BUCK3, &goni_buck3_data },
{ MAX8998_BUCK4, &goni_buck4_data },
};
static struct max8998_platform_data goni_max8998_pdata = {
.num_regulators = ARRAY_SIZE(goni_regulators),
.regulators = goni_regulators,
};
#endif
/* GPIO I2C PMIC */
#define AP_I2C_GPIO_PMIC_BUS_4 4
static struct i2c_gpio_platform_data goni_i2c_gpio_pmic_data = {
.sda_pin = S5PV210_GPJ4(0), /* XMSMCSN */
.scl_pin = S5PV210_GPJ4(3), /* XMSMIRQN */
};
static struct platform_device goni_i2c_gpio_pmic = {
.name = "i2c-gpio",
.id = AP_I2C_GPIO_PMIC_BUS_4,
.dev = {
.platform_data = &goni_i2c_gpio_pmic_data,
},
};
static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = {
#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
{
/* 0xCC when SRAD = 0 */
I2C_BOARD_INFO("max8998", 0xCC >> 1),
.platform_data = &goni_max8998_pdata,
},
#endif
};
/* PMIC Power button */
static struct gpio_keys_button goni_gpio_keys_table[] = {
{
.code = KEY_POWER,
.gpio = S5PV210_GPH2(6),
.desc = "gpio-keys: KEY_POWER",
.type = EV_KEY,
.active_low = 1,
.wakeup = 1,
.debounce_interval = 1,
},
};
static struct gpio_keys_platform_data goni_gpio_keys_data = {
.buttons = goni_gpio_keys_table,
.nbuttons = ARRAY_SIZE(goni_gpio_keys_table),
};
static struct platform_device goni_device_gpiokeys = {
.name = "gpio-keys",
.dev = {
.platform_data = &goni_gpio_keys_data,
},
};
static void __init goni_pmic_init(void)
{
/* AP_PMIC_IRQ: EINT7 */
s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf));
s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP);
/* nPower: EINT22 */
s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf));
s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP);
}
/* MoviNAND */
static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = {
.max_width = 4,
.cd_type = S3C_SDHCI_CD_PERMANENT,
};
/* Wireless LAN */
static struct s3c_sdhci_platdata goni_hsmmc1_data __initdata = {
.max_width = 4,
.cd_type = S3C_SDHCI_CD_EXTERNAL,
/* ext_cd_{init,cleanup} callbacks will be added later */
};
/* External Flash */
#define GONI_EXT_FLASH_EN S5PV210_MP05(4)
#define GONI_EXT_FLASH_CD S5PV210_GPH3(4)
static struct s3c_sdhci_platdata goni_hsmmc2_data __initdata = {
.max_width = 4,
.cd_type = S3C_SDHCI_CD_GPIO,
.ext_cd_gpio = GONI_EXT_FLASH_CD,
.ext_cd_gpio_invert = 1,
};
static void goni_setup_sdhci(void)
{
gpio_request(GONI_EXT_FLASH_EN, "FLASH_EN");
gpio_direction_output(GONI_EXT_FLASH_EN, 1);
s3c_sdhci0_set_platdata(&goni_hsmmc0_data);
s3c_sdhci1_set_platdata(&goni_hsmmc1_data);
s3c_sdhci2_set_platdata(&goni_hsmmc2_data);
};
static struct platform_device *goni_devices[] __initdata = {
&s3c_device_fb,
&s5pc110_device_onenand,
&goni_i2c_gpio_pmic,
&goni_device_gpiokeys,
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_hsmmc2,
};
static void __init goni_map_io(void)
......@@ -83,6 +476,16 @@ static void __init goni_map_io(void)
static void __init goni_machine_init(void)
{
/* PMIC */
goni_pmic_init();
i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
ARRAY_SIZE(i2c_gpio_pmic_devs));
/* SDHCI */
goni_setup_sdhci();
/* FB */
s3c_fb_set_platdata(&goni_lcd_pdata);
platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
}
......
arch/arm/mach-s5pv210/mach-smdkc110.c
浏览文件 @ 2192482e
......@@ -12,6 +12,7 @@
#include <linux/types.h>
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/i2c.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......@@ -25,18 +26,20 @@
#include <plat/s5pv210.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/ata.h>
#include <plat/iic.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
#define SMDKC110_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8
#define SMDKC110_ULCON_DEFAULT S3C2410_LCON_CS8
#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
#define SMDKC110_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG4 | \
S5PV210_UFCON_RXTRIG4)
......@@ -44,39 +47,60 @@ static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
.ucon = SMDKC110_UCON_DEFAULT,
.ulcon = SMDKC110_ULCON_DEFAULT,
.ufcon = SMDKC110_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
.ucon = SMDKC110_UCON_DEFAULT,
.ulcon = SMDKC110_ULCON_DEFAULT,
.ufcon = SMDKC110_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
.ucon = SMDKC110_UCON_DEFAULT,
.ulcon = SMDKC110_ULCON_DEFAULT,
.ufcon = SMDKC110_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
.ucon = SMDKC110_UCON_DEFAULT,
.ulcon = SMDKC110_ULCON_DEFAULT,
.ufcon = SMDKC110_UFCON_DEFAULT,
},
};
static struct s3c_ide_platdata smdkc110_ide_pdata __initdata = {
.setup_gpio = s5pv210_ide_setup_gpio,
};
static struct platform_device *smdkc110_devices[] __initdata = {
&s5pv210_device_iis0,
&s5pv210_device_ac97,
&s3c_device_cfcon,
&s3c_device_i2c0,
&s3c_device_i2c1,
&s3c_device_i2c2,
&s3c_device_rtc,
&s3c_device_wdt,
};
static struct i2c_board_info smdkc110_i2c_devs0[] __initdata = {
{ I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung S524AD0XD1 */
};
static struct i2c_board_info smdkc110_i2c_devs1[] __initdata = {
/* To Be Updated */
};
static struct i2c_board_info smdkc110_i2c_devs2[] __initdata = {
/* To Be Updated */
};
static void __init smdkc110_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
......@@ -86,6 +110,18 @@ static void __init smdkc110_map_io(void)
static void __init smdkc110_machine_init(void)
{
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_i2c2_set_platdata(NULL);
i2c_register_board_info(0, smdkc110_i2c_devs0,
ARRAY_SIZE(smdkc110_i2c_devs0));
i2c_register_board_info(1, smdkc110_i2c_devs1,
ARRAY_SIZE(smdkc110_i2c_devs1));
i2c_register_board_info(2, smdkc110_i2c_devs2,
ARRAY_SIZE(smdkc110_i2c_devs2));
s3c_ide_set_platdata(&smdkc110_ide_pdata);
platform_add_devices(smdkc110_devices, ARRAY_SIZE(smdkc110_devices));
}
......
arch/arm/mach-s5pv210/mach-smdkv210.c
浏览文件 @ 2192482e
......@@ -10,6 +10,7 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/serial_core.h>
......@@ -27,18 +28,21 @@
#include <plat/cpu.h>
#include <plat/adc.h>
#include <plat/ts.h>
#include <plat/ata.h>
#include <plat/iic.h>
#include <plat/keypad.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
#define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8
#define SMDKV210_ULCON_DEFAULT S3C2410_LCON_CS8
#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
#define SMDKV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG4 | \
S5PV210_UFCON_RXTRIG4)
......@@ -46,41 +50,86 @@ static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
.ucon = SMDKV210_UCON_DEFAULT,
.ulcon = SMDKV210_ULCON_DEFAULT,
.ufcon = SMDKV210_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
.ucon = SMDKV210_UCON_DEFAULT,
.ulcon = SMDKV210_ULCON_DEFAULT,
.ufcon = SMDKV210_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
.ucon = SMDKV210_UCON_DEFAULT,
.ulcon = SMDKV210_ULCON_DEFAULT,
.ufcon = SMDKV210_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = S5PV210_UCON_DEFAULT,
.ulcon = S5PV210_ULCON_DEFAULT,
.ufcon = S5PV210_UFCON_DEFAULT,
.ucon = SMDKV210_UCON_DEFAULT,
.ulcon = SMDKV210_ULCON_DEFAULT,
.ufcon = SMDKV210_UFCON_DEFAULT,
},
};
static struct s3c_ide_platdata smdkv210_ide_pdata __initdata = {
.setup_gpio = s5pv210_ide_setup_gpio,
};
static uint32_t smdkv210_keymap[] __initdata = {
/* KEY(row, col, keycode) */
KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
};
static struct matrix_keymap_data smdkv210_keymap_data __initdata = {
.keymap = smdkv210_keymap,
.keymap_size = ARRAY_SIZE(smdkv210_keymap),
};
static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = {
.keymap_data = &smdkv210_keymap_data,
.rows = 8,
.cols = 8,
};
static struct platform_device *smdkv210_devices[] __initdata = {
&s5pv210_device_iis0,
&s5pv210_device_ac97,
&s3c_device_adc,
&s3c_device_cfcon,
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_hsmmc2,
&s3c_device_hsmmc3,
&s3c_device_i2c0,
&s3c_device_i2c1,
&s3c_device_i2c2,
&samsung_device_keypad,
&s3c_device_rtc,
&s3c_device_ts,
&s3c_device_wdt,
};
static struct i2c_board_info smdkv210_i2c_devs0[] __initdata = {
{ I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung S524AD0XD1 */
};
static struct i2c_board_info smdkv210_i2c_devs1[] __initdata = {
/* To Be Updated */
};
static struct i2c_board_info smdkv210_i2c_devs2[] __initdata = {
/* To Be Updated */
};
static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
.delay = 10000,
.presc = 49,
......@@ -96,7 +145,21 @@ static void __init smdkv210_map_io(void)
static void __init smdkv210_machine_init(void)
{
samsung_keypad_set_platdata(&smdkv210_keypad_data);
s3c24xx_ts_set_platdata(&s3c_ts_platform);
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_i2c2_set_platdata(NULL);
i2c_register_board_info(0, smdkv210_i2c_devs0,
ARRAY_SIZE(smdkv210_i2c_devs0));
i2c_register_board_info(1, smdkv210_i2c_devs1,
ARRAY_SIZE(smdkv210_i2c_devs1));
i2c_register_board_info(2, smdkv210_i2c_devs2,
ARRAY_SIZE(smdkv210_i2c_devs2));
s3c_ide_set_platdata(&smdkv210_ide_pdata);
platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
}
......
arch/arm/mach-s5pv210/setup-fb-24bpp.c
浏览文件 @ 2192482e
......@@ -13,9 +13,9 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <mach/regs-fb.h>
#include <mach/gpio.h>
#include <mach/map.h>
#include <plat/fb.h>
#include <mach/regs-clock.h>
......
arch/arm/mach-s5pv210/setup-i2c0.c
浏览文件 @ 2192482e
......@@ -14,10 +14,10 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/gpio.h>
struct platform_device; /* don't need the contents */
#include <mach/gpio.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
......
arch/arm/mach-s5pv210/setup-i2c1.c
浏览文件 @ 2192482e
......@@ -14,10 +14,10 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/gpio.h>
struct platform_device; /* don't need the contents */
#include <mach/gpio.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
......
arch/arm/mach-s5pv210/setup-i2c2.c
浏览文件 @ 2192482e
......@@ -14,10 +14,10 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/gpio.h>
struct platform_device; /* don't need the contents */
#include <mach/gpio.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
......
arch/arm/mach-s5pv210/setup-ide.c 0 → 100644
浏览文件 @ 2192482e
/* linux/arch/arm/mach-s5pv210/setup-ide.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* S5PV210 setup information for IDE
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
void s5pv210_ide_setup_gpio(void)
{
unsigned int gpio = 0;
for (gpio = S5PV210_GPJ0(0); gpio <= S5PV210_GPJ0(7); gpio++) {
/* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST,
CF_DMACK */
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
}
for (gpio = S5PV210_GPJ2(0); gpio <= S5PV210_GPJ2(7); gpio++) {
/*CF_Data[0 - 7] */
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
}
for (gpio = S5PV210_GPJ3(0); gpio <= S5PV210_GPJ3(7); gpio++) {
/* CF_Data[8 - 15] */
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
}
for (gpio = S5PV210_GPJ4(0); gpio <= S5PV210_GPJ4(3); gpio++) {
/* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
}
}
arch/arm/mach-s5pv210/setup-keypad.c 0 → 100644
浏览文件 @ 2192482e
/*
* linux/arch/arm/mach-s5pv210/setup-keypad.c
*
* Copyright (C) 2010 Samsung Electronics Co.Ltd
* Author: Joonyoung Shim <jy0922.shim@samsung.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/gpio.h>
#include <plat/gpio-cfg.h>
void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
{
unsigned int gpio, end;
/* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */
end = S5PV210_GPH3(rows);
for (gpio = S5PV210_GPH3(0); gpio < end; gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
/* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */
end = S5PV210_GPH2(cols);
for (gpio = S5PV210_GPH2(0); gpio < end; gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
}
arch/arm/mach-s5pv210/setup-sdhci-gpio.c
浏览文件 @ 2192482e
......@@ -15,15 +15,17 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <mach/gpio.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>
void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
/* Set all the necessary GPG0/GPG1 pins to special-function 2 */
......@@ -48,12 +50,15 @@ void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
break;
}
s3c_gpio_setpull(S5PV210_GPG0(2), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PV210_GPG0(2), S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S5PV210_GPG0(2), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PV210_GPG0(2), S3C_GPIO_SFN(2));
}
}
void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
/* Set all the necessary GPG1[0:1] pins to special-function 2 */
......@@ -68,12 +73,15 @@ void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PV210_GPG1(2), S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PV210_GPG1(2), S3C_GPIO_SFN(2));
}
}
void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
/* Set all the necessary GPG2[0:1] pins to special-function 2 */
......@@ -99,6 +107,31 @@ void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
break;
}
s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2));
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2));
}
}
void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width)
{
struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
unsigned int gpio;
/* Set all the necessary GPG3[0:2] pins to special-function 2 */
for (gpio = S5PV210_GPG3(0); gpio < S5PV210_GPG3(2); gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
/* Data pin GPG3[3:6] to special-function 2 */
for (gpio = S5PV210_GPG3(3); gpio <= S5PV210_GPG3(6); gpio++) {
s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
}
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
s3c_gpio_setpull(S5PV210_GPG3(2), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PV210_GPG3(2), S3C_GPIO_SFN(2));
}
}
arch/arm/mach-s5pv210/setup-sdhci.c
浏览文件 @ 2192482e
......@@ -26,9 +26,9 @@
char *s5pv210_hsmmc_clksrcs[4] = {
[0] = "hsmmc", /* HCLK */
[1] = "hsmmc", /* HCLK */
/* [1] = "hsmmc", - duplicate HCLK entry */
[2] = "sclk_mmc", /* mmc_bus */
/*[4] = reserved */
/* [3] = NULL, - reserved */
};
void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
......
arch/arm/mach-s5pv310/Kconfig 0 → 100644
浏览文件 @ 2192482e
# arch/arm/mach-s5pv310/Kconfig
#
# Copyright (c) 2010 Samsung Electronics Co., Ltd.
# http://www.samsung.com/
#
# Licensed under GPLv2
# Configuration options for the S5PV310
if ARCH_S5PV310
config CPU_S5PV310
bool
select PLAT_S5P
help
Enable S5PV310 CPU support
config S5PV310_SETUP_I2C1
bool
help
Common setup code for i2c bus 1.
config S5PV310_SETUP_I2C2
bool
help
Common setup code for i2c bus 2.
# machine support
config MACH_SMDKV310
bool "SMDKV310"
select CPU_S5PV310
select ARCH_SPARSEMEM_ENABLE
help
Machine support for Samsung SMDKV310
config MACH_UNIVERSAL_C210
bool "Mobile UNIVERSAL_C210 Board"
select CPU_S5PV310
select ARCH_SPARSEMEM_ENABLE
help
Machine support for Samsung Mobile Universal S5PC210 Reference
Board. S5PC210(MCP) is one of package option of S5PV310
endif
arch/arm/mach-s5pv310/Makefile 0 → 100644
浏览文件 @ 2192482e
# arch/arm/mach-s5pv310/Makefile
#
# Copyright (c) 2010 Samsung Electronics Co., Ltd.
# http://www.samsung.com/
#
# Licensed under GPLv2
obj-y :=
obj-m :=
obj-n :=
obj- :=
# Core support for S5PV310 system
obj-$(CONFIG_CPU_S5PV310) += cpu.o init.o clock.o irq-combiner.o
obj-$(CONFIG_CPU_S5PV310) += setup-i2c0.o time.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
# machine support
obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o
obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o
# device support
obj-$(CONFIG_S5PV310_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S5PV310_SETUP_I2C2) += setup-i2c2.o
arch/arm/mach-s5pv310/Makefile.boot 0 → 100644
浏览文件 @ 2192482e
zreladdr-y := 0x40008000
params_phys-y := 0x40000100
arch/arm/mach-s5pv310/clock.c 0 → 100644
浏览文件 @ 2192482e
/* linux/arch/arm/mach-s5pv310/clock.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* S5PV310 - Clock support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/io.h>
#include <plat/cpu-freq.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/pll.h>
#include <plat/s5p-clock.h>
#include <plat/clock-clksrc.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
static struct clk clk_sclk_hdmi27m = {
.name = "sclk_hdmi27m",
.id = -1,
.rate = 27000000,
};
/* Core list of CMU_CPU side */
static struct clksrc_clk clk_mout_apll = {
.clk = {
.name = "mout_apll",
.id = -1,
},
.sources = &clk_src_apll,
.reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 },
.reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 },
};
static struct clksrc_clk clk_mout_epll = {
.clk = {
.name = "mout_epll",
.id = -1,
},
.sources = &clk_src_epll,
.reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 },
};
static struct clksrc_clk clk_mout_mpll = {
.clk = {
.name = "mout_mpll",
.id = -1,
},
.sources = &clk_src_mpll,
.reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 8, .size = 1 },
};
static struct clk *clkset_moutcore_list[] = {
[0] = &clk_mout_apll.clk,
[1] = &clk_mout_mpll.clk,
};
static struct clksrc_sources clkset_moutcore = {
.sources = clkset_moutcore_list,
.nr_sources = ARRAY_SIZE(clkset_moutcore_list),
};
static struct clksrc_clk clk_moutcore = {
.clk = {
.name = "moutcore",
.id = -1,
},
.sources = &clkset_moutcore,
.reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 16, .size = 1 },
};
static struct clksrc_clk clk_coreclk = {
.clk = {
.name = "core_clk",
.id = -1,
.parent = &clk_moutcore.clk,
},
.reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 0, .size = 3 },
};
static struct clksrc_clk clk_armclk = {
.clk = {
.name = "armclk",
.id = -1,
.parent = &clk_coreclk.clk,
},
};
static struct clksrc_clk clk_aclk_corem0 = {
.clk = {
.name = "aclk_corem0",
.id = -1,
.parent = &clk_coreclk.clk,
},
.reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 },
};
static struct clksrc_clk clk_aclk_cores = {
.clk = {
.name = "aclk_cores",
.id = -1,
.parent = &clk_coreclk.clk,
},
.reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 },
};
static struct clksrc_clk clk_aclk_corem1 = {
.clk = {
.name = "aclk_corem1",
.id = -1,
.parent = &clk_coreclk.clk,
},
.reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 8, .size = 3 },
};
static struct clksrc_clk clk_periphclk = {
.clk = {
.name = "periphclk",
.id = -1,
.parent = &clk_coreclk.clk,
},
.reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 12, .size = 3 },
};
static struct clksrc_clk clk_atclk = {
.clk = {
.name = "atclk",
.id = -1,
.parent = &clk_moutcore.clk,
},
.reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 16, .size = 3 },
};
static struct clksrc_clk clk_pclk_dbg = {
.clk = {
.name = "pclk_dbg",
.id = -1,
.parent = &clk_atclk.clk,
},
.reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 20, .size = 3 },
};
/* Core list of CMU_CORE side */
static struct clk *clkset_corebus_list[] = {
[0] = &clk_mout_mpll.clk,
[1] = &clk_mout_apll.clk,
};
static struct clksrc_sources clkset_mout_corebus = {
.sources = clkset_corebus_list,
.nr_sources = ARRAY_SIZE(clkset_corebus_list),
};
static struct clksrc_clk clk_mout_corebus = {
.clk = {
.name = "mout_corebus",
.id = -1,
},
.sources = &clkset_mout_corebus,
.reg_src = { .reg = S5P_CLKSRC_CORE, .shift = 4, .size = 1 },
};
static struct clksrc_clk clk_sclk_dmc = {
.clk = {
.name = "sclk_dmc",
.id = -1,
.parent = &clk_mout_corebus.clk,
},
.reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 12, .size = 3 },
};
static struct clksrc_clk clk_aclk_cored = {
.clk = {
.name = "aclk_cored",
.id = -1,
.parent = &clk_sclk_dmc.clk,
},
.reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 16, .size = 3 },
};
static struct clksrc_clk clk_aclk_corep = {
.clk = {
.name = "aclk_corep",
.id = -1,
.parent = &clk_aclk_cored.clk,
},
.reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 20, .size = 3 },
};
static struct clksrc_clk clk_aclk_acp = {
.clk = {
.name = "aclk_acp",
.id = -1,
.parent = &clk_mout_corebus.clk,
},
.reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 0, .size = 3 },
};
static struct clksrc_clk clk_pclk_acp = {
.clk = {
.name = "pclk_acp",
.id = -1,
.parent = &clk_aclk_acp.clk,
},
.reg_div = { .reg = S5P_CLKDIV_CORE0, .shift = 4, .size = 3 },
};
/* Core list of CMU_TOP side */
static struct clk *clkset_aclk_top_list[] = {
[0] = &clk_mout_mpll.clk,
[1] = &clk_mout_apll.clk,
};
static struct clksrc_sources clkset_aclk_200 = {
.sources = clkset_aclk_top_list,
.nr_sources = ARRAY_SIZE(clkset_aclk_top_list),
};
static struct clksrc_clk clk_aclk_200 = {
.clk = {
.name = "aclk_200",
.id = -1,
},
.sources = &clkset_aclk_200,
.reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 12, .size = 1 },
.reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 0, .size = 3 },
};
static struct clksrc_sources clkset_aclk_100 = {
.sources = clkset_aclk_top_list,
.nr_sources = ARRAY_SIZE(clkset_aclk_top_list),
};
static struct clksrc_clk clk_aclk_100 = {
.clk = {
.name = "aclk_100",
.id = -1,
},
.sources = &clkset_aclk_100,
.reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 16, .size = 1 },
.reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 4, .size = 4 },
};
static struct clksrc_sources clkset_aclk_160 = {
.sources = clkset_aclk_top_list,
.nr_sources = ARRAY_SIZE(clkset_aclk_top_list),
};
static struct clksrc_clk clk_aclk_160 = {
.clk = {
.name = "aclk_160",
.id = -1,
},
.sources = &clkset_aclk_160,
.reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 20, .size = 1 },
.reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 },
};
static struct clksrc_sources clkset_aclk_133 = {
.sources = clkset_aclk_top_list,
.nr_sources = ARRAY_SIZE(clkset_aclk_top_list),
};
static struct clksrc_clk clk_aclk_133 = {
.clk = {
.name = "aclk_133",
.id = -1,
},
.sources = &clkset_aclk_133,
.reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 24, .size = 1 },
.reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 12, .size = 3 },
};
static struct clk *clkset_vpllsrc_list[] = {
[0] = &clk_fin_vpll,
[1] = &clk_sclk_hdmi27m,
};
static struct clksrc_sources clkset_vpllsrc = {
.sources = clkset_vpllsrc_list,
.nr_sources = ARRAY_SIZE(clkset_vpllsrc_list),
};
static struct clksrc_clk clk_vpllsrc = {
.clk = {
.name = "vpll_src",
.id = -1,
},
.sources = &clkset_vpllsrc,
.reg_src = { .reg = S5P_CLKSRC_TOP1, .shift = 0, .size = 1 },
};
static struct clk *clkset_sclk_vpll_list[] = {
[0] = &clk_vpllsrc.clk,
[1] = &clk_fout_vpll,
};
static struct clksrc_sources clkset_sclk_vpll = {
.sources = clkset_sclk_vpll_list,
.nr_sources = ARRAY_SIZE(clkset_sclk_vpll_list),
};
static struct clksrc_clk clk_sclk_vpll = {
.clk = {
.name = "sclk_vpll",
.id = -1,
},
.sources = &clkset_sclk_vpll,
.reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 8, .size = 1 },
};
static int s5pv310_clk_ip_peril_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKGATE_IP_PERIL, clk, enable);
}
static struct clk init_clocks_disable[] = {
{
.name = "timers",
.id = -1,
.parent = &clk_aclk_100.clk,
.enable = s5pv310_clk_ip_peril_ctrl,
.ctrlbit = (1<<24),
}
};
static struct clk init_clocks[] = {
/* Nothing here yet */
};
static struct clk *clkset_group_list[] = {
[0] = &clk_ext_xtal_mux,
[1] = &clk_xusbxti,
[2] = &clk_sclk_hdmi27m,
[6] = &clk_mout_mpll.clk,
[7] = &clk_mout_epll.clk,
[8] = &clk_sclk_vpll.clk,
};
static struct clksrc_sources clkset_group = {
.sources = clkset_group_list,
.nr_sources = ARRAY_SIZE(clkset_group_list),
};
static struct clksrc_clk clksrcs[] = {
{
.clk = {
.name = "uclk1",
.id = 0,
.ctrlbit = (1 << 0),
.enable = s5pv310_clk_ip_peril_ctrl,
},
.sources = &clkset_group,
.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 },
.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 },
}, {
.clk = {
.name = "uclk1",
.id = 1,
.enable = s5pv310_clk_ip_peril_ctrl,
.ctrlbit = (1 << 1),
},
.sources = &clkset_group,
.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 },
.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 },
}, {
.clk = {
.name = "uclk1",
.id = 2,
.enable = s5pv310_clk_ip_peril_ctrl,
.ctrlbit = (1 << 2),
},
.sources = &clkset_group,
.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 },
.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 },
}, {
.clk = {
.name = "uclk1",
.id = 3,
.enable = s5pv310_clk_ip_peril_ctrl,
.ctrlbit = (1 << 3),
},
.sources = &clkset_group,
.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 },
.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 },
}, {
.clk = {
.name = "sclk_pwm",
.id = -1,
.enable = s5pv310_clk_ip_peril_ctrl,
.ctrlbit = (1 << 24),
},
.sources = &clkset_group,
.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 24, .size = 4 },
.reg_div = { .reg = S5P_CLKDIV_PERIL3, .shift = 0, .size = 4 },
},
};
/* Clock initialization code */
static struct clksrc_clk *sysclks[] = {
&clk_mout_apll,
&clk_mout_epll,
&clk_mout_mpll,
&clk_moutcore,
&clk_coreclk,
&clk_armclk,
&clk_aclk_corem0,
&clk_aclk_cores,
&clk_aclk_corem1,
&clk_periphclk,
&clk_atclk,
&clk_pclk_dbg,
&clk_mout_corebus,
&clk_sclk_dmc,
&clk_aclk_cored,
&clk_aclk_corep,
&clk_aclk_acp,
&clk_pclk_acp,
&clk_vpllsrc,
&clk_sclk_vpll,
&clk_aclk_200,
&clk_aclk_100,
&clk_aclk_160,
&clk_aclk_133,
};
void __init_or_cpufreq s5pv310_setup_clocks(void)
{
struct clk *xtal_clk;
unsigned long apll;
unsigned long mpll;
unsigned long epll;
unsigned long vpll;
unsigned long vpllsrc;
unsigned long xtal;
unsigned long armclk;
unsigned long aclk_corem0;
unsigned long aclk_cores;
unsigned long aclk_corem1;
unsigned long periphclk;
unsigned long sclk_dmc;
unsigned long aclk_cored;
unsigned long aclk_corep;
unsigned long aclk_acp;
unsigned long pclk_acp;
unsigned int ptr;
printk(KERN_DEBUG "%s: registering clocks\n", __func__);
xtal_clk = clk_get(NULL, "xtal");
BUG_ON(IS_ERR(xtal_clk));
xtal = clk_get_rate(xtal_clk);
clk_put(xtal_clk);
printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), pll_4508);
mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), pll_4508);
epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
__raw_readl(S5P_EPLL_CON1), pll_4500);
vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
__raw_readl(S5P_VPLL_CON1), pll_4502);
clk_fout_apll.rate = apll;
clk_fout_mpll.rate = mpll;
clk_fout_epll.rate = epll;
clk_fout_vpll.rate = vpll;
printk(KERN_INFO "S5PV310: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
apll, mpll, epll, vpll);
armclk = clk_get_rate(&clk_armclk.clk);
aclk_corem0 = clk_get_rate(&clk_aclk_corem0.clk);
aclk_cores = clk_get_rate(&clk_aclk_cores.clk);
aclk_corem1 = clk_get_rate(&clk_aclk_corem1.clk);
periphclk = clk_get_rate(&clk_periphclk.clk);
sclk_dmc = clk_get_rate(&clk_sclk_dmc.clk);
aclk_cored = clk_get_rate(&clk_aclk_cored.clk);
aclk_corep = clk_get_rate(&clk_aclk_corep.clk);
aclk_acp = clk_get_rate(&clk_aclk_acp.clk);
pclk_acp = clk_get_rate(&clk_pclk_acp.clk);
printk(KERN_INFO "S5PV310: ARMCLK=%ld, COREM0=%ld, CORES=%ld\n"
"COREM1=%ld, PERI=%ld, DMC=%ld, CORED=%ld\n"
"COREP=%ld, ACLK_ACP=%ld, PCLK_ACP=%ld",
armclk, aclk_corem0, aclk_cores, aclk_corem1,
periphclk, sclk_dmc, aclk_cored, aclk_corep,
aclk_acp, pclk_acp);
clk_f.rate = armclk;
clk_h.rate = sclk_dmc;
clk_p.rate = periphclk;
for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
s3c_set_clksrc(&clksrcs[ptr], true);
}
static struct clk *clks[] __initdata = {
/* Nothing here yet */
};
void __init s5pv310_register_clocks(void)
{
struct clk *clkp;
int ret;
int ptr;
ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
if (ret > 0)
printk(KERN_ERR "Failed to register %u clocks\n", ret);
for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
s3c_register_clksrc(sysclks[ptr], 1);
s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
clkp = init_clocks_disable;
for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
ret = s3c24xx_register_clock(clkp);
if (ret < 0) {
printk(KERN_ERR "Failed to register clock %s (%d)\n",
clkp->name, ret);
}
(clkp->enable)(clkp, 0);
}
s3c_pwmclk_init();
}
arch/arm/mach-s5pv310/cpu.c 0 → 100644
浏览文件 @ 2192482e
/* linux/arch/arm/mach-s5pv310/cpu.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/sched.h>
#include <linux/sysdev.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/proc-fns.h>
#include <plat/cpu.h>
#include <plat/clock.h>
#include <plat/s5pv310.h>
#include <mach/regs-irq.h>
void __iomem *gic_cpu_base_addr;
extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
unsigned int irq_start);
extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
/* Initial IO mappings */
static struct map_desc s5pv310_iodesc[] __initdata = {
{
.virtual = (unsigned long)S5P_VA_COREPERI_BASE,
.pfn = __phys_to_pfn(S5PV310_PA_COREPERI),
.length = SZ_8K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_COMBINER_BASE,
.pfn = __phys_to_pfn(S5PV310_PA_COMBINER),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_L2CC,
.pfn = __phys_to_pfn(S5PV310_PA_L2CC),
.length = SZ_4K,
.type = MT_DEVICE,
},
};
static void s5pv310_idle(void)
{
if (!need_resched())
cpu_do_idle();
local_irq_enable();
}
/* s5pv310_map_io
*
* register the standard cpu IO areas
*/
void __init s5pv310_map_io(void)
{
iotable_init(s5pv310_iodesc, ARRAY_SIZE(s5pv310_iodesc));
}
void __init s5pv310_init_clocks(int xtal)
{
printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
s3c24xx_register_baseclocks(xtal);
s5p_register_clocks(xtal);
s5pv310_register_clocks();
s5pv310_setup_clocks();
}
void __init s5pv310_init_irq(void)
{
int irq;
gic_cpu_base_addr = S5P_VA_GIC_CPU;
gic_dist_init(0, S5P_VA_GIC_DIST, IRQ_LOCALTIMER);
gic_cpu_init(0, S5P_VA_GIC_CPU);
for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
COMBINER_IRQ(irq, 0));
combiner_cascade_irq(irq, IRQ_SPI(irq));
}
/* The parameters of s5p_init_irq() are for VIC init.
* Theses parameters should be NULL and 0 because S5PV310
* uses GIC instead of VIC.
*/
s5p_init_irq(NULL, 0);
}
struct sysdev_class s5pv310_sysclass = {
.name = "s5pv310-core",
};
static struct sys_device s5pv310_sysdev = {
.cls = &s5pv310_sysclass,
};
static int __init s5pv310_core_init(void)
{
return sysdev_class_register(&s5pv310_sysclass);
}
core_initcall(s5pv310_core_init);
int __init s5pv310_init(void)
{
printk(KERN_INFO "S5PV310: Initializing architecture\n");
/* set idle function */
pm_idle = s5pv310_idle;
return sysdev_register(&s5pv310_sysdev);
}
arch/arm/mach-s5pv310/headsmp.S 0 → 100644
浏览文件 @ 2192482e
/*
* linux/arch/arm/mach-s5pv310/headsmp.S
*
* Cloned from linux/arch/arm/mach-realview/headsmp.S
*
* Copyright (c) 2003 ARM Limited
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <linux/init.h>
__INIT
/*
* s5pv310 specific entry point for secondary CPUs. This provides
* a "holding pen" into which all secondary cores are held until we're
* ready for them to initialise.
*/
ENTRY(s5pv310_secondary_startup)
mrc p15, 0, r0, c0, c0, 5
and r0, r0, #15
adr r4, 1f
ldmia r4, {r5, r6}
sub r4, r4, r5
add r6, r6, r4
pen: ldr r7, [r6]
cmp r7, r0
bne pen
/*
* we've been released from the holding pen: secondary_stack
* should now contain the SVC stack for this core
*/
b secondary_startup
1: .long .
.long pen_release
arch/arm/mach-s5pv310/include/mach/debug-macro.S 0 → 100644
浏览文件 @ 2192482e
/* linux/arch/arm/mach-s5pv310/include/mach/debug-macro.S
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/* pull in the relevant register and map files. */
#include <mach/map.h>
/* note, for the boot process to work we have to keep the UART
* virtual address aligned to an 1MiB boundary for the L1
* mapping the head code makes. We keep the UART virtual address
* aligned and add in the offset when we load the value here.
*/
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, = S3C_PA_UART
ldrne \rx, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
add \rx, \rx, #(0x10000 * CONFIG_DEBUG_S3C_UART)
#endif
.endm
#define fifo_full fifo_full_s5pv210
#define fifo_level fifo_level_s5pv210
#include <plat/debug-macro.S>
arch/arm/mach-s5pv310/include/mach/entry-macro.S 0 → 100644
浏览文件 @ 2192482e
/* arch/arm/mach-s5pv310/include/mach/entry-macro.S
*
* Cloned from arch/arm/mach-realview/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for S5PV310 platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <mach/hardware.h>
#include <asm/hardware/gic.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =gic_cpu_base_addr
ldr \base, [\base]
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
/*
* The interrupt numbering scheme is defined in the
* interrupt controller spec. To wit:
*
* Interrupts 0-15 are IPI
* 16-28 are reserved
* 29-31 are local. We allow 30 to be used for the watchdog.
* 32-1020 are global
* 1021-1022 are reserved
* 1023 is "spurious" (no interrupt)
*
* For now, we ignore all local interrupts so only return an interrupt if it's
* between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
*
* A simple read from the controller will tell us the number of the highest
* priority enabled interrupt. We then just need to check whether it is in the
* valid range for an IRQ (30-1020 inclusive).
*/
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
ldr \tmp, =1021
bic \irqnr, \irqstat, #0x1c00
cmp \irqnr, #29
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
addne \irqnr, \irqnr, #32
.endm
/* We assume that irqstat (the raw value of the IRQ acknowledge
* register) is preserved from the macro above.
* If there is an IPI, we immediately signal end of interrupt on the
* controller, since this requires the original irqstat value which
* we won't easily be able to recreate later.
*/
.macro test_for_ipi, irqnr, irqstat, base, tmp
bic \irqnr, \irqstat, #0x1c00
cmp \irqnr, #16
strcc \irqstat, [\base, #GIC_CPU_EOI]
cmpcs \irqnr, \irqnr
.endm
/* As above, this assumes that irqstat and base are preserved.. */
.macro test_for_ltirq, irqnr, irqstat, base, tmp
bic \irqnr, \irqstat, #0x1c00
mov \tmp, #0
cmp \irqnr, #29
moveq \tmp, #1
streq \irqstat, [\base, #GIC_CPU_EOI]
cmp \tmp, #0
.endm
arch/arm/mach-s5pv310/include/mach/gpio.h 0 → 100644
浏览文件 @ 2192482e
/* linux/arch/arm/mach-s5pv310/include/mach/gpio.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* S5PV310 - GPIO lib support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H __FILE__
#define gpio_get_value __gpio_get_value
#define gpio_set_value __gpio_set_value
#define gpio_cansleep __gpio_cansleep
#define gpio_to_irq __gpio_to_irq
/* Practically, GPIO banks upto GPZ are the configurable gpio banks */
/* GPIO bank sizes */
#define S5PV310_GPIO_A0_NR (8)
#define S5PV310_GPIO_A1_NR (6)
#define S5PV310_GPIO_B_NR (8)
#define S5PV310_GPIO_C0_NR (5)
#define S5PV310_GPIO_C1_NR (5)
#define S5PV310_GPIO_D0_NR (4)
#define S5PV310_GPIO_D1_NR (4)
#define S5PV310_GPIO_E0_NR (5)
#define S5PV310_GPIO_E1_NR (8)
#define S5PV310_GPIO_E2_NR (6)
#define S5PV310_GPIO_E3_NR (8)
#define S5PV310_GPIO_E4_NR (8)
#define S5PV310_GPIO_F0_NR (8)
#define S5PV310_GPIO_F1_NR (8)
#define S5PV310_GPIO_F2_NR (8)
#define S5PV310_GPIO_F3_NR (6)
#define S5PV310_GPIO_J0_NR (8)
#define S5PV310_GPIO_J1_NR (5)
#define S5PV310_GPIO_K0_NR (7)
#define S5PV310_GPIO_K1_NR (7)
#define S5PV310_GPIO_K2_NR (7)
#define S5PV310_GPIO_K3_NR (7)
#define S5PV310_GPIO_L0_NR (8)
#define S5PV310_GPIO_L1_NR (3)
#define S5PV310_GPIO_L2_NR (8)
#define S5PV310_GPIO_X0_NR (8)
#define S5PV310_GPIO_X1_NR (8)
#define S5PV310_GPIO_X2_NR (8)
#define S5PV310_GPIO_X3_NR (8)
#define S5PV310_GPIO_Z_NR (7)
/* GPIO bank numbers */
#define S5PV310_GPIO_NEXT(__gpio) \
((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
enum s5p_gpio_number {
S5PV310_GPIO_A0_START = 0,
S5PV310_GPIO_A1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_A0),
S5PV310_GPIO_B_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_A1),
S5PV310_GPIO_C0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_B),
S5PV310_GPIO_C1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_C0),
S5PV310_GPIO_D0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_C1),
S5PV310_GPIO_D1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_D0),
S5PV310_GPIO_E0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_D1),
S5PV310_GPIO_E1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E0),
S5PV310_GPIO_E2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E1),
S5PV310_GPIO_E3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E2),
S5PV310_GPIO_E4_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E3),
S5PV310_GPIO_F0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E4),
S5PV310_GPIO_F1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F0),
S5PV310_GPIO_F2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F1),
S5PV310_GPIO_F3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F2),
S5PV310_GPIO_J0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F3),
S5PV310_GPIO_J1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_J0),
S5PV310_GPIO_K0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_J1),
S5PV310_GPIO_K1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K0),
S5PV310_GPIO_K2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K1),
S5PV310_GPIO_K3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K2),
S5PV310_GPIO_L0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K3),
S5PV310_GPIO_L1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_L0),
S5PV310_GPIO_L2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_L1),
S5PV310_GPIO_X0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_L2),
S5PV310_GPIO_X1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X0),
S5PV310_GPIO_X2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X1),
S5PV310_GPIO_X3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X2),
S5PV310_GPIO_Z_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X3),
};
/* S5PV310 GPIO number definitions */
#define S5PV310_GPA0(_nr) (S5PV310_GPIO_A0_START + (_nr))
#define S5PV310_GPA1(_nr) (S5PV310_GPIO_A1_START + (_nr))
#define S5PV310_GPB(_nr) (S5PV310_GPIO_B_START + (_nr))
#define S5PV310_GPC0(_nr) (S5PV310_GPIO_C0_START + (_nr))
#define S5PV310_GPC1(_nr) (S5PV310_GPIO_C1_START + (_nr))
#define S5PV310_GPD0(_nr) (S5PV310_GPIO_D0_START + (_nr))
#define S5PV310_GPD1(_nr) (S5PV310_GPIO_D1_START + (_nr))
#define S5PV310_GPE0(_nr) (S5PV310_GPIO_E0_START + (_nr))
#define S5PV310_GPE1(_nr) (S5PV310_GPIO_E1_START + (_nr))
#define S5PV310_GPE2(_nr) (S5PV310_GPIO_E2_START + (_nr))
#define S5PV310_GPE3(_nr) (S5PV310_GPIO_E3_START + (_nr))
#define S5PV310_GPE4(_nr) (S5PV310_GPIO_E4_START + (_nr))
#define S5PV310_GPF0(_nr) (S5PV310_GPIO_F0_START + (_nr))
#define S5PV310_GPF1(_nr) (S5PV310_GPIO_F1_START + (_nr))
#define S5PV310_GPF2(_nr) (S5PV310_GPIO_F2_START + (_nr))
#define S5PV310_GPF3(_nr) (S5PV310_GPIO_F3_START + (_nr))
#define S5PV310_GPJ0(_nr) (S5PV310_GPIO_J0_START + (_nr))
#define S5PV310_GPJ1(_nr) (S5PV310_GPIO_J1_START + (_nr))
#define S5PV310_GPK0(_nr) (S5PV310_GPIO_K0_START + (_nr))
#define S5PV310_GPK1(_nr) (S5PV310_GPIO_K1_START + (_nr))
#define S5PV310_GPK2(_nr) (S5PV310_GPIO_K2_START + (_nr))
#define S5PV310_GPK3(_nr) (S5PV310_GPIO_K3_START + (_nr))
#define S5PV310_GPL0(_nr) (S5PV310_GPIO_L0_START + (_nr))
#define S5PV310_GPL1(_nr) (S5PV310_GPIO_L1_START + (_nr))
#define S5PV310_GPL2(_nr) (S5PV310_GPIO_L2_START + (_nr))
#define S5PV310_GPX0(_nr) (S5PV310_GPIO_X0_START + (_nr))
#define S5PV310_GPX1(_nr) (S5PV310_GPIO_X1_START + (_nr))
#define S5PV310_GPX2(_nr) (S5PV310_GPIO_X2_START + (_nr))
#define S5PV310_GPX3(_nr) (S5PV310_GPIO_X3_START + (_nr))
#define S5PV310_GPZ(_nr) (S5PV310_GPIO_Z_START + (_nr))
/* the end of the S5PV310 specific gpios */
#define S5PV310_GPIO_END (S5PV310_GPZ(S5PV310_GPIO_Z_NR) + 1)
#define S3C_GPIO_END S5PV310_GPIO_END
/* define the number of gpios we need to the one after the GPZ() range */
#define ARCH_NR_GPIOS (S5PV310_GPZ(S5PV310_GPIO_Z_NR) + \
CONFIG_SAMSUNG_GPIO_EXTRA + 1)
#include <asm-generic/gpio.h>
#endif /* __ASM_ARCH_GPIO_H */
arch/arm/mach-s5pv310/include/mach/hardware.h 0 → 100644
浏览文件 @ 2192482e
/* linux/arch/arm/mach-s5pv310/include/mach/hardware.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* S5PV310 - Hardware support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H __FILE__
/* currently nothing here, placeholder */
#endif /* __ASM_ARCH_HARDWARE_H */
arch/arm/mach-s5pv310/include/mach/io.h 0 → 100644
浏览文件 @ 2192482e
/* linux/arch/arm/mach-s5pv310/include/mach/io.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org>
*
* Based on arch/arm/mach-s5p6442/include/mach/io.h
*
* Default IO routines for S5PV310
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H __FILE__
/* No current ISA/PCI bus support. */
#define __io(a) __typesafe_io(a)
#define __mem_pci(a) (a)
#define IO_SPACE_LIMIT (0xFFFFFFFF)
#endif /* __ASM_ARM_ARCH_IO_H */
arch/arm/mach-s5pv310/include/mach/irqs.h 0 → 100644
浏览文件 @ 2192482e
/* linux/arch/arm/mach-s5pv310/include/mach/irqs.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* S5PV210 - IRQ definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H __FILE__
#include <plat/irqs.h>
/* Private Peripheral Interrupt */
#define IRQ_PPI(x) S5P_IRQ(x+16)
#define IRQ_LOCALTIMER IRQ_PPI(13)
/* Shared Peripheral Interrupt */
#define IRQ_SPI(x) S5P_IRQ(x+32)
#define IRQ_EINT0 IRQ_SPI(40)
#define IRQ_EINT1 IRQ_SPI(41)
#define IRQ_EINT2 IRQ_SPI(42)
#define IRQ_EINT3 IRQ_SPI(43)
#define IRQ_USB_HSOTG IRQ_SPI(44)
#define IRQ_USB_HOST IRQ_SPI(45)
#define IRQ_MODEM_IF IRQ_SPI(46)
#define IRQ_ROTATOR IRQ_SPI(47)
#define IRQ_JPEG IRQ_SPI(48)
#define IRQ_2D IRQ_SPI(49)
#define IRQ_PCIE IRQ_SPI(50)
#define IRQ_SYSTEM_TIMER IRQ_SPI(51)
#define IRQ_MFC IRQ_SPI(52)
#define IRQ_WTD IRQ_SPI(53)
#define IRQ_AUDIO_SS IRQ_SPI(54)
#define IRQ_AC97 IRQ_SPI(55)
#define IRQ_SPDIF IRQ_SPI(56)
#define IRQ_KEYPAD IRQ_SPI(57)
#define IRQ_INTFEEDCTRL_SSS IRQ_SPI(58)
#define IRQ_SLIMBUS IRQ_SPI(59)
#define IRQ_PMU IRQ_SPI(60)
#define IRQ_TSI IRQ_SPI(61)
#define IRQ_SATA IRQ_SPI(62)
#define IRQ_GPS IRQ_SPI(63)
#define MAX_IRQ_IN_COMBINER 8
#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(64))
#define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y)
#define IRQ_TIMER0_VIC COMBINER_IRQ(22, 0)
#define IRQ_TIMER1_VIC COMBINER_IRQ(22, 1)
#define IRQ_TIMER2_VIC COMBINER_IRQ(22, 2)
#define IRQ_TIMER3_VIC COMBINER_IRQ(22, 3)
#define IRQ_TIMER4_VIC COMBINER_IRQ(22, 4)
#define IRQ_UART0 COMBINER_IRQ(26, 0)
#define IRQ_UART1 COMBINER_IRQ(26, 1)
#define IRQ_UART2 COMBINER_IRQ(26, 2)
#define IRQ_UART3 COMBINER_IRQ(26, 3)
#define IRQ_UART4 COMBINER_IRQ(26, 4)
#define IRQ_IIC COMBINER_IRQ(27, 0)
/* Set the default NR_IRQS */
#define NR_IRQS COMBINER_IRQ(MAX_COMBINER_NR, 0)
#define MAX_COMBINER_NR 39
#endif /* ASM_ARCH_IRQS_H */
arch/arm/mach-s5pv310/include/mach/map.h 0 → 100644
浏览文件 @ 2192482e
/* linux/arch/arm/mach-s5pv310/include/mach/map.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* S5PV310 - Memory map definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_MAP_H
#define __ASM_ARCH_MAP_H __FILE__
#include <plat/map-base.h>
/*
* S5PV310 UART offset is 0x10000 but the older S5P SoCs are 0x400.
* So need to define it, and here is to avoid redefinition warning.
*/
#define S3C_UART_OFFSET (0x10000)
#include <plat/map-s5p.h>
#define S5PV310_PA_CHIPID (0x10000000)
#define S5P_PA_CHIPID S5PV310_PA_CHIPID
#define S5PV310_PA_SYSCON (0x10020000)
#define S5P_PA_SYSCON S5PV310_PA_SYSCON
#define S5PV310_PA_WATCHDOG (0x10060000)
#define S5PV310_PA_COMBINER (0x10448000)
#define S5PV310_PA_COREPERI (0x10500000)
#define S5PV310_PA_GIC_CPU (0x10500100)
#define S5PV310_PA_TWD (0x10500600)
#define S5PV310_PA_GIC_DIST (0x10501000)
#define S5PV310_PA_L2CC (0x10502000)
#define S5PV310_PA_GPIO (0x11000000)
#define S5P_PA_GPIO S5PV310_PA_GPIO
#define S5PV310_PA_UART (0x13800000)
#define S5P_PA_UART(x) (S5PV310_PA_UART + ((x) * S3C_UART_OFFSET))
#define S5P_PA_UART0 S5P_PA_UART(0)
#define S5P_PA_UART1 S5P_PA_UART(1)
#define S5P_PA_UART2 S5P_PA_UART(2)
#define S5P_PA_UART3 S5P_PA_UART(3)
#define S5P_PA_UART4 S5P_PA_UART(4)
#define S5P_SZ_UART SZ_256
#define S5PV310_PA_IIC0 (0x13860000)
#define S5PV310_PA_TIMER (0x139D0000)
#define S5P_PA_TIMER S5PV310_PA_TIMER
#define S5PV310_PA_SDRAM (0x40000000)
#define S5P_PA_SDRAM S5PV310_PA_SDRAM
/* compatibiltiy defines. */
#define S3C_PA_UART S5PV310_PA_UART
#define S3C_PA_IIC S5PV310_PA_IIC0
#define S3C_PA_WDT S5PV310_PA_WATCHDOG
#endif /* __ASM_ARCH_MAP_H */
arch/arm/mach-s5pv310/include/mach/memory.h 0 → 100644
浏览文件 @ 2192482e
/* linux/arch/arm/mach-s5pv310/include/mach/memory.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* S5PV310 - Memory definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H __FILE__
#define PHYS_OFFSET UL(0x40000000)
/* Maximum of 256MiB in one bank */
#define MAX_PHYSMEM_BITS 32
#define SECTION_SIZE_BITS 28
#endif /* __ASM_ARCH_MEMORY_H */
arch/arm/mach-s5pv310/include/mach/pwm-clock.h 0 → 100644
浏览文件 @ 2192482e
/* linux/arch/arm/mach-s5pv310/include/mach/pwm-clock.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
*
* S5PV310 - pwm clock and timer support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_PWMCLK_H
#define __ASM_ARCH_PWMCLK_H __FILE__
/**
* pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
* @tcfg: The timer TCFG1 register bits shifted down to 0.
*
* Return true if the given configuration from TCFG1 is a TCLK instead
* any of the TDIV clocks.
*/
static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
{
return tcfg == S3C64XX_TCFG1_MUX_TCLK;
}
/**
* tcfg_to_divisor() - convert tcfg1 setting to a divisor
* @tcfg1: The tcfg1 setting, shifted down.
*
* Get the divisor value for the given tcfg1 setting. We assume the
* caller has already checked to see if this is not a TCLK source.
*/
static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
{
return 1 << tcfg1;
}
/**
* pwm_tdiv_has_div1() - does the tdiv setting have a /1
*
* Return true if we have a /1 in the tdiv setting.
*/
static inline unsigned int pwm_tdiv_has_div1(void)
{
return 1;
}
/**
* pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
* @div: The divisor to calculate the bit information for.
*
* Turn a divisor into the necessary bit field for TCFG1.
*/
static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
{
return ilog2(div);
}
#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
#endif /* __ASM_ARCH_PWMCLK_H */
arch/arm/mach-s5pv310/include/mach/regs-clock.h 0 → 100644
浏览文件 @ 2192482e
/* linux/arch/arm/mach-s5pv310/include/mach/regs-clock.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* S5PV310 - Clock register definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_REGS_CLOCK_H
#define __ASM_ARCH_REGS_CLOCK_H __FILE__
#include <mach/map.h>
#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
#define S5P_INFORM0 S5P_CLKREG(0x800)
#define S5P_EPLL_CON0 S5P_CLKREG(0x1C110)
#define S5P_EPLL_CON1 S5P_CLKREG(0x1C114)
#define S5P_VPLL_CON0 S5P_CLKREG(0x1C120)
#define S5P_VPLL_CON1 S5P_CLKREG(0x1C124)
#define S5P_CLKSRC_TOP0 S5P_CLKREG(0x1C210)
#define S5P_CLKSRC_TOP1 S5P_CLKREG(0x1C214)
#define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x1C250)
#define S5P_CLKDIV_TOP S5P_CLKREG(0x1C510)
#define S5P_CLKDIV_PERIL0 S5P_CLKREG(0x1C550)
#define S5P_CLKDIV_PERIL1 S5P_CLKREG(0x1C554)
#define S5P_CLKDIV_PERIL2 S5P_CLKREG(0x1C558)
#define S5P_CLKDIV_PERIL3 S5P_CLKREG(0x1C55C)
#define S5P_CLKDIV_PERIL4 S5P_CLKREG(0x1C560)
#define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x1C564)
#define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x1C950)
#define S5P_CLKSRC_CORE S5P_CLKREG(0x20200)
#define S5P_CLKDIV_CORE0 S5P_CLKREG(0x20500)
#define S5P_APLL_LOCK S5P_CLKREG(0x24000)
#define S5P_MPLL_LOCK S5P_CLKREG(0x24004)
#define S5P_APLL_CON0 S5P_CLKREG(0x24100)
#define S5P_APLL_CON1 S5P_CLKREG(0x24104)
#define S5P_MPLL_CON0 S5P_CLKREG(0x24108)
#define S5P_MPLL_CON1 S5P_CLKREG(0x2410C)
#define S5P_CLKSRC_CPU S5P_CLKREG(0x24200)
#define S5P_CLKMUX_STATCPU S5P_CLKREG(0x24400)
#define S5P_CLKDIV_CPU S5P_CLKREG(0x24500)
#define S5P_CLKDIV_STATCPU S5P_CLKREG(0x24600)
#define S5P_CLKGATE_SCLKCPU S5P_CLKREG(0x24800)
#endif /* __ASM_ARCH_REGS_CLOCK_H */
arch/arm/mach-s5pv310/include/mach/regs-irq.h 0 → 100644
浏览文件 @ 2192482e
/* linux/arch/arm/mach-s5pv310/include/mach/regs-irq.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* S5PV310 - IRQ register definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_REGS_IRQ_H
#define __ASM_ARCH_REGS_IRQ_H __FILE__
#include <asm/hardware/gic.h>
#include <mach/map.h>
#endif /* __ASM_ARCH_REGS_IRQ_H */
arch/arm/mach-s5pv310/include/mach/smp.h 0 → 100644
浏览文件 @ 2192482e
/* linux/arch/arm/mach-s5pv310/include/mach/smp.h
*
* Cloned from arch/arm/mach-realview/include/mach/smp.h
*/
#ifndef ASM_ARCH_SMP_H
#define ASM_ARCH_SMP_H __FILE__
#include <asm/hardware/gic.h>
extern void __iomem *gic_cpu_base_addr;
#define hard_smp_processor_id() \
({ \
unsigned int cpunum; \
__asm__("mrc p15, 0, %0, c0, c0, 5" \
: "=r" (cpunum)); \
cpunum &= 0x03; \
})
/*
* We use IRQ1 as the IPI
*/
static inline void smp_cross_call(const struct cpumask *mask)
{
gic_raise_softirq(mask, 1);
}
#endif
arch/arm/mach-s5pv310/include/mach/system.h 0 → 100644
浏览文件 @ 2192482e
/* linux/arch/arm/mach-s5pv310/include/mach/system.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* S5PV310 - system support header
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
#include <plat/system-reset.h>
static void arch_idle(void)
{
/* nothing here yet */
}
#endif /* __ASM_ARCH_SYSTEM_H */
arch/arm/mach-s5pv310/include/mach/timex.h 0 → 100644
浏览文件 @ 2192482e
/* linux/arch/arm/mach-s5pv310/include/mach/timex.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* Copyright (c) 2003-2010 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Based on arch/arm/mach-s5p6442/include/mach/timex.h
*
* S5PV310 - time parameters
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_TIMEX_H
#define __ASM_ARCH_TIMEX_H __FILE__
/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
* a variable is useless. It seems as long as we make our timers an
* exact multiple of HZ, any value that makes a 1->1 correspondence
* for the time conversion functions to/from jiffies is acceptable.
*/
#define CLOCK_TICK_RATE 12000000
#endif /* __ASM_ARCH_TIMEX_H */
arch/arm/mach-s5pv310/include/mach/uncompress.h 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/mach-s5pv310/include/mach/vmalloc.h 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/mach-s5pv310/init.c 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/mach-s5pv310/irq-combiner.c 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/mach-s5pv310/localtimer.c 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/mach-s5pv310/mach-smdkv310.c 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/mach-s5pv310/mach-universal_c210.c 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/mach-s5pv310/platsmp.c 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/mach-s5pv310/setup-i2c0.c 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/mach-s5pv310/setup-i2c1.c 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/mach-s5pv310/setup-i2c2.c 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/mach-s5pv310/time.c 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/mm/Kconfig
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-s5p/Kconfig
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-s5p/Makefile
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-s5p/cpu.c
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-s5p/dev-fimc0.c 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-s5p/dev-fimc1.c 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-s5p/dev-fimc2.c 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-s5p/dev-pmu.c 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-s5p/include/plat/reset.h 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-s5p/include/plat/s5pv310.h 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-s5p/include/plat/system-reset.h 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-s5p/irq.c
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-samsung/Kconfig
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-samsung/Makefile
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-samsung/dev-hsmmc.c
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-samsung/dev-hsmmc1.c
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-samsung/dev-hsmmc2.c
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-samsung/dev-hsmmc3.c 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-samsung/dev-ide.c 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-samsung/dev-keypad.c 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-samsung/dev-wdt.c
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-samsung/gpiolib.c
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-samsung/include/plat/adc-core.h 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-samsung/include/plat/ata-core.h 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-samsung/include/plat/ata.h 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-samsung/include/plat/fimc-core.h 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-samsung/include/plat/keypad-core.h 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-samsung/include/plat/regs-ata.h 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
arch/arm/plat-samsung/platformdata.c 0 → 100644
浏览文件 @ 2192482e
此差异已折叠。
drivers/i2c/busses/Kconfig
浏览文件 @ 2192482e
此差异已折叠。
drivers/rtc/Kconfig
浏览文件 @ 2192482e
此差异已折叠。
drivers/rtc/rtc-s3c.c
浏览文件 @ 2192482e
此差异已折叠。
drivers/serial/Kconfig
浏览文件 @ 2192482e
此差异已折叠。
drivers/serial/s5pv210.c
浏览文件 @ 2192482e
此差异已折叠。
drivers/serial/samsung.c
浏览文件 @ 2192482e
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或