提交 2184d566 编写于 作者: A Arnd Bergmann

Merge tag 'hix5hd2-dt-for-3.19' of git://github.com/hisilicon/linux-hisi into next/dt

Pull "ARM: DT:  Hisilicon terminal SoC HiX5HD2 DT updates for 3.19" from Wei Xu:

- Add reboot node, reusing syscon-reboot
- Add I2C nodes Hisilicon IP
- Add IR node based on Hisilicon IP
- Add Watchdog node based on ARM IP
- Add GPIO nodes based on ARM GPIO IP
- Add SATA node based on Hisilicon IP
- Add USB nodes
- Add MMC nodes based on Synopsys IP
- Add GMAC nodes based on Hisilicon IP

* tag 'hix5hd2-dt-for-3.19' of git://github.com/hisilicon/linux-hisi:
  ARM: dts: hix5hd2: add reboot node
  ARM: dts: hix5hd2: add i2c node
  ARM: dts: hix5hd2: add ir node
  ARM: dts: hix5hd2: add wdg node
  ARM: dts: hix5hd2: add gpio node
  ARM: dts: hix5hd2: add sata node
  ARM: dts: hix5hd2: add usb node
  ARM: dts: hix5hd2: add mmc node
  ARM: dts: hix5hd2: add gmac node
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
......@@ -51,3 +51,36 @@
&uart0 {
status = "okay";
};
&gmac0 {
#address-cells = <1>;
#size-cells = <0>;
phy-handle = <&phy2>;
phy-mode = "mii";
/* Placeholder, overwritten by bootloader */
mac-address = [00 00 00 00 00 00];
status = "okay";
phy2: ethernet-phy@2 {
reg = <2>;
};
};
&gmac1 {
#address-cells = <1>;
#size-cells = <0>;
phy-handle = <&phy1>;
phy-mode = "rgmii";
/* Placeholder, overwritten by bootloader */
mac-address = [00 00 00 00 00 00];
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&ahci {
phys = <&sata_phy>;
phy-names = "sata-phy";
};
......@@ -131,6 +131,249 @@
clock-names = "apb_pclk";
status = "disabled";
};
gpio0: gpio@b20000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb20000 0x1000>;
interrupts = <0 108 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio1: gpio@b21000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb21000 0x1000>;
interrupts = <0 109 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio2: gpio@b22000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb22000 0x1000>;
interrupts = <0 110 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio3: gpio@b23000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb23000 0x1000>;
interrupts = <0 111 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio4: gpio@b24000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb24000 0x1000>;
interrupts = <0 112 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio5: gpio@004000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x004000 0x1000>;
interrupts = <0 113 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio6: gpio@b26000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb26000 0x1000>;
interrupts = <0 114 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio7: gpio@b27000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb27000 0x1000>;
interrupts = <0 115 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio8: gpio@b28000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb28000 0x1000>;
interrupts = <0 116 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio9: gpio@b29000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb29000 0x1000>;
interrupts = <0 117 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio10: gpio@b2a000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb2a000 0x1000>;
interrupts = <0 118 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio11: gpio@b2b000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb2b000 0x1000>;
interrupts = <0 119 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio12: gpio@b2c000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb2c000 0x1000>;
interrupts = <0 120 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio13: gpio@b2d000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb2d000 0x1000>;
interrupts = <0 121 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio14: gpio@b2e000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb2e000 0x1000>;
interrupts = <0 122 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio15: gpio@b2f000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb2f000 0x1000>;
interrupts = <0 123 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio16: gpio@b30000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb30000 0x1000>;
interrupts = <0 124 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
gpio17: gpio@b31000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0xb31000 0x1000>;
interrupts = <0 125 0x4>;
gpio-controller;
#gpio-cells = <2>;
clocks = <&clock HIX5HD2_FIXED_100M>;
clock-names = "apb_pclk";
interrupt-controller;
#interrupt-cells = <2>;
status = "disabled";
};
wdt0: watchdog@a2c000 {
compatible = "arm,sp805", "arm,primecell";
arm,primecell-periphid = <0x00141805>;
reg = <0xa2c000 0x1000>;
interrupts = <0 29 4>;
clocks = <&clock HIX5HD2_WDG0_RST>;
clock-names = "apb_pclk";
};
};
local_timer@00a00600 {
......@@ -148,9 +391,15 @@
};
sysctrl: system-controller@00000000 {
compatible = "hisilicon,sysctrl";
compatible = "hisilicon,sysctrl", "syscon";
reg = <0x00000000 0x1000>;
reboot-offset = <0x4>;
};
reboot {
compatible = "syscon-reboot";
regmap = <&sysctrl>;
offset = <0x4>;
mask = <0xdeadbeef>;
};
cpuctrl@00a22000 {
......@@ -166,5 +415,142 @@
#clock-cells = <1>;
};
};
/* unremovable emmc as mmcblk0 */
mmc: mmc@1830000 {
compatible = "snps,dw-mshc";
reg = <0x1830000 0x1000>;
interrupts = <0 35 4>;
clocks = <&clock HIX5HD2_MMC_CIU_RST>,
<&clock HIX5HD2_MMC_BIU_CLK>;
clock-names = "ciu", "biu";
};
sd: mmc@1820000 {
compatible = "snps,dw-mshc";
reg = <0x1820000 0x1000>;
interrupts = <0 34 4>;
clocks = <&clock HIX5HD2_SD_CIU_RST>,
<&clock HIX5HD2_SD_BIU_CLK>;
clock-names = "ciu","biu";
};
gmac0: ethernet@1840000 {
compatible = "hisilicon,hix5hd2-gmac";
reg = <0x1840000 0x1000>,<0x184300c 0x4>;
interrupts = <0 71 4>;
clocks = <&clock HIX5HD2_MAC0_CLK>;
status = "disabled";
};
gmac1: ethernet@1841000 {
compatible = "hisilicon,hix5hd2-gmac";
reg = <0x1841000 0x1000>,<0x1843010 0x4>;
interrupts = <0 72 4>;
clocks = <&clock HIX5HD2_MAC1_CLK>;
status = "disabled";
};
usb0: ehci@1890000 {
compatible = "generic-ehci";
reg = <0x1890000 0x1000>;
interrupts = <0 66 4>;
clocks = <&clock HIX5HD2_USB_CLK>;
};
usb1: ohci@1880000 {
compatible = "generic-ohci";
reg = <0x1880000 0x1000>;
interrupts = <0 67 4>;
clocks = <&clock HIX5HD2_USB_CLK>;
};
peripheral_ctrl: syscon@a20000 {
compatible = "syscon";
reg = <0xa20000 0x1000>;
};
sata_phy: phy@1900000 {
compatible = "hisilicon,hix5hd2-sata-phy";
reg = <0x1900000 0x10000>;
#phy-cells = <0>;
hisilicon,peripheral-syscon = <&peripheral_ctrl>;
hisilicon,power-reg = <0x8 10>;
};
ahci: sata@1900000 {
compatible = "hisilicon,hisi-ahci";
reg = <0x1900000 0x10000>;
interrupts = <0 70 4>;
clocks = <&clock HIX5HD2_SATA_CLK>;
};
ir: ir@001000 {
compatible = "hisilicon,hix5hd2-ir";
reg = <0x001000 0x1000>;
interrupts = <0 47 4>;
clocks = <&clock HIX5HD2_FIXED_24M>;
hisilicon,power-syscon = <&sysctrl>;
};
i2c0: i2c@b10000 {
compatible = "hisilicon,hix5hd2-i2c";
reg = <0xb10000 0x1000>;
interrupts = <0 38 4>;
clocks = <&clock HIX5HD2_I2C0_RST>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c1: i2c@b11000 {
compatible = "hisilicon,hix5hd2-i2c";
reg = <0xb11000 0x1000>;
interrupts = <0 39 4>;
clocks = <&clock HIX5HD2_I2C1_RST>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c2: i2c@b12000 {
compatible = "hisilicon,hix5hd2-i2c";
reg = <0xb12000 0x1000>;
interrupts = <0 40 4>;
clocks = <&clock HIX5HD2_I2C2_RST>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c3: i2c@b13000 {
compatible = "hisilicon,hix5hd2-i2c";
reg = <0xb13000 0x1000>;
interrupts = <0 41 4>;
clocks = <&clock HIX5HD2_I2C3_RST>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c4: i2c@b16000 {
compatible = "hisilicon,hix5hd2-i2c";
reg = <0xb16000 0x1000>;
interrupts = <0 43 4>;
clocks = <&clock HIX5HD2_I2C4_RST>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c5: i2c@b17000 {
compatible = "hisilicon,hix5hd2-i2c";
reg = <0xb17000 0x1000>;
interrupts = <0 44 4>;
clocks = <&clock HIX5HD2_I2C5_RST>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
};
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册