提交 21768639 编写于 作者: P Peter Tyser 提交者: Linus Torvalds

edac: mpc85xx mask ecc syndrome correctly

With a 64-bit wide data bus only the lowest 8-bits of the ECC syndrome are
relevant.  With a 32-bit wide data bus only the lowest 16-bits are
relevant on most architectures.

Without this change, the ECC syndrome displayed can be mildly confusing,
eg:

  EDAC MPC85xx MC1: syndrome: 0x25252525

When in reality the ECC syndrome is 0x25.

A variety of Freescale manuals say a variety of different things about how
to decode the CAPTURE_ECC (syndrome) register.  I don't have a system with
a 32-bit bus to test on, but I believe the change is correct.  It'd be
good to get an ACK from someone at Freescale about this change though.
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Dave Jiang <djiang@mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 8467005d
......@@ -672,6 +672,7 @@ static void mpc85xx_mc_check(struct mem_ctl_info *mci)
{
struct mpc85xx_mc_pdata *pdata = mci->pvt_info;
struct csrow_info *csrow;
u32 bus_width;
u32 err_detect;
u32 syndrome;
u32 err_addr;
......@@ -692,6 +693,15 @@ static void mpc85xx_mc_check(struct mem_ctl_info *mci)
}
syndrome = in_be32(pdata->mc_vbase + MPC85XX_MC_CAPTURE_ECC);
/* Mask off appropriate bits of syndrome based on bus width */
bus_width = (in_be32(pdata->mc_vbase + MPC85XX_MC_DDR_SDRAM_CFG) &
DSC_DBW_MASK) ? 32 : 64;
if (bus_width == 64)
syndrome &= 0xff;
else
syndrome &= 0xffff;
err_addr = in_be32(pdata->mc_vbase + MPC85XX_MC_CAPTURE_ADDRESS);
pfn = err_addr >> PAGE_SHIFT;
......@@ -707,7 +717,7 @@ static void mpc85xx_mc_check(struct mem_ctl_info *mci)
mpc85xx_mc_printk(mci, KERN_ERR, "Capture Data Low: %#8.8x\n",
in_be32(pdata->mc_vbase +
MPC85XX_MC_CAPTURE_DATA_LO));
mpc85xx_mc_printk(mci, KERN_ERR, "syndrome: %#8.8x\n", syndrome);
mpc85xx_mc_printk(mci, KERN_ERR, "syndrome: %#2.2x\n", syndrome);
mpc85xx_mc_printk(mci, KERN_ERR, "err addr: %#8.8x\n", err_addr);
mpc85xx_mc_printk(mci, KERN_ERR, "PFN: %#8.8x\n", pfn);
......
......@@ -48,6 +48,9 @@
#define DSC_MEM_EN 0x80000000
#define DSC_ECC_EN 0x20000000
#define DSC_RD_EN 0x10000000
#define DSC_DBW_MASK 0x00180000
#define DSC_DBW_32 0x00080000
#define DSC_DBW_64 0x00000000
#define DSC_SDTYPE_MASK 0x07000000
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册