Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (138 commits)
  [SCSI] libata: implement minimal transport template for ->eh_timed_out
  [SCSI] eliminate rphy allocation in favour of expander/end device allocation
  [SCSI] convert mptsas over to end_device/expander allocations
  [SCSI] allow displaying and setting of cache type via sysfs
  [SCSI] add scsi_mode_select to scsi_lib.c
  [SCSI] 3ware 9000 add big endian support
  [SCSI] qla2xxx: update MAINTAINERS
  [SCSI] scsi: move target_destroy call
  [SCSI] fusion - bump version
  [SCSI] fusion - expander hotplug suport in mptsas module
  [SCSI] fusion - exposing raid components in mptsas
  [SCSI] fusion - memory leak, and initializing fields
  [SCSI] fusion - exclosure misspelled
  [SCSI] fusion - cleanup mptsas event handling functions
  [SCSI] fusion - removing target_id/bus_id from the VirtDevice structure
  [SCSI] fusion - static fix's
  [SCSI] fusion - move some debug firmware event debug msgs to verbose level
  [SCSI] fusion - loginfo header update
  [SCSI] add scsi_reprobe_device
  [SCSI] megaraid_sas: fix extended timeout handling
  ...

MAINTAINERS

@@ -2145,7 +2145,7 @@ S:	Maintained
 
 QLOGIC QLA2XXX FC-SCSI DRIVER
 P:	Andrew Vasquez
-M:	andrew.vasquez@qlogic.com
+M:	linux-driver@qlogic.com
 L:	linux-scsi@vger.kernel.org
 S:	Supported
 

drivers/base/bus.c

@@ -536,6 +536,28 @@ void bus_rescan_devices(struct bus_type * bus)
 	bus_for_each_dev(bus, NULL, NULL, bus_rescan_devices_helper);
 }
 
+/**
+ * device_reprobe - remove driver for a device and probe for a new driver
+ * @dev: the device to reprobe
+ *
+ * This function detaches the attached driver (if any) for the given
+ * device and restarts the driver probing process.  It is intended
+ * to use if probing criteria changed during a devices lifetime and
+ * driver attachment should change accordingly.
+ */
+void device_reprobe(struct device *dev)
+{
+	if (dev->driver) {
+		if (dev->parent)        /* Needed for USB */
+			down(&dev->parent->sem);
+		device_release_driver(dev);
+		if (dev->parent)
+			up(&dev->parent->sem);
+	}
+
+	bus_rescan_devices_helper(dev, NULL);
+}
+EXPORT_SYMBOL_GPL(device_reprobe);
 
 struct bus_type * get_bus(struct bus_type * bus)
 {

drivers/block/cciss.c

@@ -3251,8 +3251,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 
 clean4:
 #ifdef CONFIG_CISS_SCSI_TAPE
-	if(hba[i]->scsi_rejects.complete)
-		kfree(hba[i]->scsi_rejects.complete);
+	kfree(hba[i]->scsi_rejects.complete);
 #endif
 	kfree(hba[i]->cmd_pool_bits);
 	if(hba[i]->cmd_pool)

drivers/message/fusion/Kconfig

@@ -9,6 +9,7 @@ config FUSION_SPI
 	tristate "Fusion MPT ScsiHost drivers for SPI"
 	depends on PCI && SCSI
 	select FUSION
+	select SCSI_SPI_ATTRS
 	---help---
 	  SCSI HOST support for a parallel SCSI host adapters.
 

drivers/message/fusion/Makefile

@@ -4,6 +4,7 @@
 #EXTRA_CFLAGS += -DMPT_DEBUG_MSG_FRAME
 #EXTRA_CFLAGS += -DMPT_DEBUG_SG
 #EXTRA_CFLAGS += -DMPT_DEBUG_EVENTS
+#EXTRA_CFLAGS += -DMPT_DEBUG_VERBOSE_EVENTS
 #EXTRA_CFLAGS += -DMPT_DEBUG_INIT
 #EXTRA_CFLAGS += -DMPT_DEBUG_EXIT
 #EXTRA_CFLAGS += -DMPT_DEBUG_FAIL

drivers/message/fusion/lsi/mpi_log_sas.h

@@ -3,38 +3,11 @@
  *                                                                         *
  *  Copyright 2003 LSI Logic Corporation.  All rights reserved.            *
  *                                                                         *
- *  This file is confidential and a trade secret of LSI Logic.  The        *
- *  receipt of or possession of this file does not convey any rights to    *
- *  reproduce or disclose its contents or to manufacture, use, or sell     *
- *  anything it may describe, in whole, or in part, without the specific   *
- *  written consent of LSI Logic Corporation.                              *
+ * Description                                                             *
+ * ------------                                                            *
+ * This include file contains SAS firmware interface IOC Log Info codes    *
  *                                                                         *
- ***************************************************************************
- *
- *           Name:  iopiIocLogInfo.h
- *          Title:  SAS Firmware IOP Interface IOC Log Info Definitions
- *     Programmer:  Guy Kendall
- *  Creation Date:  September 24, 2003
- *
- *  Version History
- *  ---------------
- *
- *  Last Updated
- *  -------------
- *  Version         %version: 22 %
- *  Date Updated    %date_modified: %
- *  Programmer      %created_by: nperucca %
- *
- *  Date      Who   Description
- *  --------  ---   -------------------------------------------------------
- *  09/24/03  GWK   Initial version
- *
- *
- * Description
- * ------------
- * This include file contains SAS firmware interface IOC Log Info codes
- *
- *-------------------------------------------------------------------------
+ *-------------------------------------------------------------------------*
  */
 
 #ifndef IOPI_IOCLOGINFO_H_INCLUDED
@@ -57,6 +30,8 @@
 #define IOC_LOGINFO_ORIGINATOR_PL                       (0x01000000)
 #define IOC_LOGINFO_ORIGINATOR_IR                       (0x02000000)
 
+#define IOC_LOGINFO_ORIGINATOR_MASK                     (0x0F000000)
+
 /****************************************************************************/
 /* LOGINFO_CODE defines                                                     */
 /****************************************************************************/
@@ -78,11 +53,27 @@
 #define IOP_LOGINFO_CODE_CONFIG_INVALID_PAGE_DEFAULT    (0x00030700) /* Default Page not found */
 #define IOP_LOGINFO_CODE_TASK_TERMINATED                (0x00050000)
 
+#define IOP_LOGINFO_CODE_ENCL_MGMT_READ_ACTION_ERR0R    (0x00060001) /* Read Action not supported for SEP msg */
+#define IOP_LOGINFO_CODE_ENCL_MGMT_INVALID_BUS_ID_ERR0R (0x00060002) /* Invalid Bus/ID in SEP msg */
+
+#define IOP_LOGINFO_CODE_TARGET_ASSIST_TERMINATED       (0x00070001)
+#define IOP_LOGINFO_CODE_TARGET_STATUS_SEND_TERMINATED  (0x00070002)
+#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_ALL_IO       (0x00070003)
+#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO     (0x00070004)
+#define IOP_LOGINFO_CODE_TARGET_MODE_ABORT_EXACT_IO_REQ (0x00070005)
 
 /****************************************************************************/
 /* PL LOGINFO_CODE defines, valid if IOC_LOGINFO_ORIGINATOR = PL            */
 /****************************************************************************/
 #define PL_LOGINFO_CODE_OPEN_FAILURE                        (0x00010000)
+#define PL_LOG_INFO_CODE_OPEN_FAILURE_NO_DEST_TIME_OUT      (0x00010001)
+#define PL_LOGINFO_CODE_OPEN_FAILURE_BAD_DESTINATION        (0x00010011)
+#define PL_LOGINFO_CODE_OPEN_FAILURE_PROTOCOL_NOT_SUPPORTED (0x00010013)
+#define PL_LOGINFO_CODE_OPEN_FAILURE_STP_RESOURCES_BSY      (0x00010018)
+#define PL_LOGINFO_CODE_OPEN_FAILURE_WRONG_DESTINATION      (0x00010019)
+#define PL_LOGINFO_CODE_OPEN_FAILURE_ORR_TIMEOUT            (0X0001001A)
+#define PL_LOGINFO_CODE_OPEN_FAILURE_PATHWAY_BLOCKED        (0x0001001B)
+#define PL_LOGINFO_CODE_OPEN_FAILURE_AWT_MAXED              (0x0001001C)
 #define PL_LOGINFO_CODE_INVALID_SGL                         (0x00020000)
 #define PL_LOGINFO_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH       (0x00030000)
 #define PL_LOGINFO_CODE_FRAME_XFER_ERROR                    (0x00040000)
@@ -97,6 +88,7 @@
 #define PL_LOGINFO_CODE_SATA_LINK_DOWN                      (0x000D0000)
 #define PL_LOGINFO_CODE_DISCOVERY_SATA_INIT_W_IOS           (0x000E0000)
 #define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE                 (0x000F0000)
+#define PL_LOGINFO_CODE_CONFIG_PL_NOT_INITIALIZED           (0x000F0001) /* PL not yet initialized, can't do config page req. */
 #define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PT              (0x000F0100) /* Invalid Page Type */
 #define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NUM_PHYS        (0x000F0200) /* Invalid Number of Phys */
 #define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NOT_IMP         (0x000F0300) /* Case Not Handled */
@@ -105,11 +97,23 @@
 #define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_PHY             (0x000F0600) /* Invalid Phy */
 #define PL_LOGINFO_CODE_CONFIG_INVALID_PAGE_NO_OWNER        (0x000F0700) /* No Owner Found */
 #define PL_LOGINFO_CODE_DSCVRY_SATA_INIT_TIMEOUT            (0x00100000)
-#define PL_LOGINFO_CODE_RESET                               (0x00110000)
-#define PL_LOGINFO_CODE_ABORT                               (0x00120000)
+#define PL_LOGINFO_CODE_RESET                               (0x00110000) /* See Sub-Codes below */
+#define PL_LOGINFO_CODE_ABORT                               (0x00120000) /* See Sub-Codes below */
 #define PL_LOGINFO_CODE_IO_NOT_YET_EXECUTED                 (0x00130000)
 #define PL_LOGINFO_CODE_IO_EXECUTED                         (0x00140000)
+#define PL_LOGINFO_CODE_PERS_RESV_OUT_NOT_AFFIL_OWNER       (0x00150000)
+#define PL_LOGINFO_CODE_OPEN_TXDMA_ABORT                    (0x00160000)
 #define PL_LOGINFO_SUB_CODE_OPEN_FAILURE                    (0x00000100)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_NO_DEST_TIMEOUT    (0x00000101)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_ORR_TIMEOUT        (0x0000011A) /* Open Reject (Retry) Timeout */
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_PATHWAY_BLOCKED    (0x0000011B)
+#define PL_LOGINFO_SUB_CODE_OPEN_FAILURE_AWT_MAXED          (0x0000011C) /* Arbitration Wait Timer Maxed */
+
+#define PL_LOGINFO_SUB_CODE_TARGET_BUS_RESET                (0x00000120)
+#define PL_LOGINFO_SUB_CODE_TRANSPORT_LAYER                 (0x00000130)  /* Leave lower nibble (1-f) reserved. */
+#define PL_LOGINFO_SUB_CODE_PORT_LAYER                      (0x00000140)  /* Leave lower nibble (1-f) reserved. */
+
+
 #define PL_LOGINFO_SUB_CODE_INVALID_SGL                     (0x00000200)
 #define PL_LOGINFO_SUB_CODE_WRONG_REL_OFF_OR_FRAME_LENGTH   (0x00000300)
 #define PL_LOGINFO_SUB_CODE_FRAME_XFER_ERROR                (0x00000400)
@@ -123,26 +127,39 @@
 #define PL_LOGINFO_SUB_CODE_RX_FM_CURRENT_FRAME_ERROR       (0x00000C00)
 #define PL_LOGINFO_SUB_CODE_SATA_LINK_DOWN                  (0x00000D00)
 #define PL_LOGINFO_SUB_CODE_DISCOVERY_SATA_INIT_W_IOS       (0x00000E00)
+#define PL_LOGINFO_SUB_CODE_DISCOVERY_REMOTE_SEP_RESET      (0x00000E01)
+#define PL_LOGINFO_SUB_CODE_SECOND_OPEN                     (0x00000F00)
 #define PL_LOGINFO_SUB_CODE_DSCVRY_SATA_INIT_TIMEOUT        (0x00001000)
 
 
 #define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE         (0x00200000) /* Can't get SMP Frame */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR            (0x00200001) /* Error occured on SMP Read */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR           (0x00200002) /* Error occured on SMP Write */
-#define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL     (0x00200004) /* Encl Mgmt services not available for this WWID */
-#define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED   (0x00200005) /* Address Mode not suppored */
-#define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM              (0x00200006) /* Invalid Slot Number in SEP Msg */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SGPIO_NOT_PRESENT         (0x00200007) /* SGPIO not present/enabled */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR            (0x00200010) /* Error occured on SMP Read */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR           (0x00200020) /* Error occured on SMP Write */
+#define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL     (0x00200040) /* Encl Mgmt services not available for this WWID */
+#define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED   (0x00200050) /* Address Mode not suppored */
+#define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM              (0x00200060) /* Invalid Slot Number in SEP Msg */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SGPIO_NOT_PRESENT         (0x00200070) /* SGPIO not present/enabled */
+#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_NOT_CONFIGURED       (0x00200080) /* GPIO not configured */
+#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_FRAME_ERROR          (0x00200090) /* GPIO can't allocate a frame */
+#define PL_LOGINFO_CODE_ENCL_MGMT_GPIO_CONFIG_PAGE_ERROR    (0x002000A0) /* GPIO failed config page request */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SES_FRAME_ALLOC_ERROR     (0x002000B0) /* Can't get frame for SES command */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SES_IO_ERROR              (0x002000C0) /* I/O execution error */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SES_RETRIES_EXHAUSTED     (0x002000D0) /* SEP I/O retries exhausted */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_ALLOC_ERROR     (0x002000E0) /* Can't get frame for SMP command */
 
 #define PL_LOGINFO_DA_SEP_NOT_PRESENT                       (0x00200100) /* SEP not present when msg received */
 #define PL_LOGINFO_DA_SEP_SINGLE_THREAD_ERROR               (0x00200101) /* Can only accept 1 msg at a time */
 #define PL_LOGINFO_DA_SEP_ISTWI_INTR_IN_IDLE_STATE          (0x00200102) /* ISTWI interrupt recvd. while IDLE */
 #define PL_LOGINFO_DA_SEP_RECEIVED_NACK_FROM_SLAVE          (0x00200103) /* SEP NACK'd, it is busy */
-#define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM             (0x00200104) /* SEP stopped or sent bad chksum in Hdr */
-#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1         (0x00200105) /* SEP returned unknown scsi status */
-#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2         (0x00200106) /* SEP returned unknown scsi status */
-#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP           (0x00200107) /* SEP returned bad chksum after STOP */
-#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP_GETDATA   (0x00200108) /* SEP returned bad chksum after STOP while gettin data*/
+#define PL_LOGINFO_DA_SEP_DID_NOT_RECEIVE_ACK               (0x00200104) /* SEP didn't rcv. ACK (Last Rcvd Bit = 1) */
+#define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM             (0x00200105) /* SEP stopped or sent bad chksum in Hdr */
+#define PL_LOGINFO_DA_SEP_STOP_ON_DATA                      (0x00200106) /* SEP stopped while transfering data */
+#define PL_LOGINFO_DA_SEP_STOP_ON_SENSE_DATA                (0x00200107) /* SEP stopped while transfering sense data */
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1         (0x00200108) /* SEP returned unknown scsi status */
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2         (0x00200109) /* SEP returned unknown scsi status */
+#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP           (0x0020010A) /* SEP returned bad chksum after STOP */
+#define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP_GETDATA   (0x0020010B) /* SEP returned bad chksum after STOP while gettin data*/
+#define PL_LOGINFO_DA_SEP_UNSUPPORTED_COMMAND               (0x0020010C) /* SEP doesn't support CDB opcode */
 
 
 /****************************************************************************/

drivers/message/fusion/mptbase.c

@@ -180,6 +180,7 @@ static void	mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
 static void	mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
 static void	mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
 static void	mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info);
+static int	mpt_read_ioc_pg_3(MPT_ADAPTER *ioc);
 
 /* module entry point */
 static int  __init    fusion_init  (void);
@@ -428,7 +429,7 @@ mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply)
 		results = ProcessEventNotification(ioc, pEvReply, &evHandlers);
 		if (results != evHandlers) {
 			/* CHECKME! Any special handling needed here? */
-			devtprintk((MYIOC_s_WARN_FMT "Called %d event handlers, sum results = %d\n",
+			devtverboseprintk((MYIOC_s_WARN_FMT "Called %d event handlers, sum results = %d\n",
 					ioc->name, evHandlers, results));
 		}
 
@@ -438,10 +439,10 @@ mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply)
 		 */
 		if (pEvReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY) {
 			freereq = 0;
-			devtprintk((MYIOC_s_WARN_FMT "EVENT_NOTIFICATION reply %p does not return Request frame\n",
+			devtverboseprintk((MYIOC_s_WARN_FMT "EVENT_NOTIFICATION reply %p does not return Request frame\n",
 				ioc->name, pEvReply));
 		} else {
-			devtprintk((MYIOC_s_WARN_FMT "EVENT_NOTIFICATION reply %p returns Request frame\n",
+			devtverboseprintk((MYIOC_s_WARN_FMT "EVENT_NOTIFICATION reply %p returns Request frame\n",
 				ioc->name, pEvReply));
 		}
 
@@ -1120,65 +1121,6 @@ mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp)
 	return -1;
 }
 
-int
-mpt_alt_ioc_wait(MPT_ADAPTER *ioc)
-{
-	int loop_count = 30 * 4;  /* Wait 30 seconds */
-	int status = -1; /* -1 means failed to get board READY */
-
-	do {
-		spin_lock(&ioc->initializing_hba_lock);
-		if (ioc->initializing_hba_lock_flag == 0) {
-			ioc->initializing_hba_lock_flag=1;
-			spin_unlock(&ioc->initializing_hba_lock);
-			status = 0;
-			break;
-		}
-		spin_unlock(&ioc->initializing_hba_lock);
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(HZ/4);
-	} while (--loop_count);
-
-	return status;
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/*
- *	mpt_bringup_adapter - This is a wrapper function for mpt_do_ioc_recovery
- *	@ioc: Pointer to MPT adapter structure
- *	@sleepFlag: Use schedule if CAN_SLEEP else use udelay.
- *
- *	This routine performs all the steps necessary to bring the IOC
- *	to a OPERATIONAL state.
- *
- *      Special Note: This function was added with spin lock's so as to allow
- *      the dv(domain validation) work thread to succeed on the other channel
- *      that maybe occuring at the same time when this function is called.
- *      Without this lock, the dv would fail when message frames were
- *      requested during hba bringup on the alternate ioc.
- */
-static int
-mpt_bringup_adapter(MPT_ADAPTER *ioc, int sleepFlag)
-{
-	int r;
-
-	if(ioc->alt_ioc) {
-		if((r=mpt_alt_ioc_wait(ioc->alt_ioc)!=0))
-			return r;
-	}
-
-	r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
-	    CAN_SLEEP);
-
-	if(ioc->alt_ioc) {
-		spin_lock(&ioc->alt_ioc->initializing_hba_lock);
-		ioc->alt_ioc->initializing_hba_lock_flag=0;
-		spin_unlock(&ioc->alt_ioc->initializing_hba_lock);
-	}
-
-return r;
-}
-
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
  *	mpt_attach - Install a PCI intelligent MPT adapter.
@@ -1482,7 +1424,8 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 	 */
 	mpt_detect_bound_ports(ioc, pdev);
 
-	if ((r = mpt_bringup_adapter(ioc, CAN_SLEEP)) != 0){
+	if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
+	    CAN_SLEEP)) != 0){
 		printk(KERN_WARNING MYNAM
 		  ": WARNING - %s did not initialize properly! (%d)\n",
 		  ioc->name, r);
@@ -1629,7 +1572,6 @@ mpt_resume(struct pci_dev *pdev)
 	MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
 	u32 device_state = pdev->current_state;
 	int recovery_state;
-	int ii;
 
 	printk(MYIOC_s_INFO_FMT
 	"pci-resume: pdev=0x%p, slot=%s, Previous operating state [D%d]\n",
@@ -1643,14 +1585,6 @@ mpt_resume(struct pci_dev *pdev)
 	CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
 	ioc->active = 1;
 
-	/* F/W not running */
-	if(!CHIPREG_READ32(&ioc->chip->Doorbell)) {
-		/* enable domain validation flags */
-		for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
-			ioc->spi_data.dvStatus[ii] |= MPT_SCSICFG_NEED_DV;
-		}
-	}
-
 	printk(MYIOC_s_INFO_FMT
 		"pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
 		ioc->name,
@@ -4938,7 +4872,7 @@ mpt_findImVolumes(MPT_ADAPTER *ioc)
 	return rc;
 }
 
-int
+static int
 mpt_read_ioc_pg_3(MPT_ADAPTER *ioc)
 {
 	IOCPage3_t		*pIoc3;
@@ -5146,13 +5080,13 @@ SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch)
 
 	evnp = (EventNotification_t *) mpt_get_msg_frame(mpt_base_index, ioc);
 	if (evnp == NULL) {
-		devtprintk((MYIOC_s_WARN_FMT "Unable to allocate event request frame!\n",
+		devtverboseprintk((MYIOC_s_WARN_FMT "Unable to allocate event request frame!\n",
 				ioc->name));
 		return 0;
 	}
 	memset(evnp, 0, sizeof(*evnp));
 
-	devtprintk((MYIOC_s_INFO_FMT "Sending EventNotification (%d) request %p\n", ioc->name, EvSwitch, evnp));
+	devtverboseprintk((MYIOC_s_INFO_FMT "Sending EventNotification (%d) request %p\n", ioc->name, EvSwitch, evnp));
 
 	evnp->Function = MPI_FUNCTION_EVENT_NOTIFICATION;
 	evnp->ChainOffset = 0;
@@ -5907,24 +5841,27 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
 		break;
 	case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
 	{
+		char buf[50];
+		u8 id = (u8)(evData0);
 		u8 ReasonCode = (u8)(evData0 >> 16);
 		switch (ReasonCode) {
 		case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
-			ds = "SAS Device Status Change: Added";
+			sprintf(buf,"SAS Device Status Change: Added: id=%d", id);
 			break;
 		case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
-			ds = "SAS Device Status Change: Deleted";
+			sprintf(buf,"SAS Device Status Change: Deleted: id=%d", id);
 			break;
 		case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
-			ds = "SAS Device Status Change: SMART Data";
+			sprintf(buf,"SAS Device Status Change: SMART Data: id=%d", id);
 			break;
 		case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
-			ds = "SAS Device Status Change: No Persistancy Added";
+			sprintf(buf,"SAS Device Status Change: No Persistancy Added: id=%d", id);
 			break;
 		default:
-			ds = "SAS Device Status Change: Unknown";
+			sprintf(buf,"SAS Device Status Change: Unknown: id=%d", id);
 		break;
 		}
+		ds = buf;
 		break;
 	}
 	case MPI_EVENT_ON_BUS_TIMER_EXPIRED:
@@ -5940,11 +5877,97 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
 		ds = "Persistent Table Full";
 		break;
 	case MPI_EVENT_SAS_PHY_LINK_STATUS:
-		ds = "SAS PHY Link Status";
+	{
+		char buf[50];
+		u8 LinkRates = (u8)(evData0 >> 8);
+		u8 PhyNumber = (u8)(evData0);
+		LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >>
+			MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT;
+		switch (LinkRates) {
+		case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN:
+			sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+			   " Rate Unknown",PhyNumber);
+			break;
+		case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED:
+			sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+			   " Phy Disabled",PhyNumber);
+			break;
+		case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION:
+			sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+			   " Failed Speed Nego",PhyNumber);
+			break;
+		case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE:
+			sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+			   " Sata OOB Completed",PhyNumber);
+			break;
+		case MPI_EVENT_SAS_PLS_LR_RATE_1_5:
+			sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+			   " Rate 1.5 Gbps",PhyNumber);
+			break;
+		case MPI_EVENT_SAS_PLS_LR_RATE_3_0:
+			sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+			   " Rate 3.0 Gpbs",PhyNumber);
+			break;
+		default:
+			sprintf(buf,"SAS PHY Link Status: Phy=%d", PhyNumber);
+			break;
+		}
+		ds = buf;
 		break;
+	}
 	case MPI_EVENT_SAS_DISCOVERY_ERROR:
 		ds = "SAS Discovery Error";
 		break;
+	case MPI_EVENT_IR_RESYNC_UPDATE:
+	{
+		u8 resync_complete = (u8)(evData0 >> 16);
+		char buf[40];
+		sprintf(buf,"IR Resync Update: Complete = %d:",resync_complete);
+		ds = buf;
+		break;
+	}
+	case MPI_EVENT_IR2:
+	{
+		u8 ReasonCode = (u8)(evData0 >> 16);
+		switch (ReasonCode) {
+		case MPI_EVENT_IR2_RC_LD_STATE_CHANGED:
+			ds = "IR2: LD State Changed";
+			break;
+		case MPI_EVENT_IR2_RC_PD_STATE_CHANGED:
+			ds = "IR2: PD State Changed";
+			break;
+		case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL:
+			ds = "IR2: Bad Block Table Full";
+			break;
+		case MPI_EVENT_IR2_RC_PD_INSERTED:
+			ds = "IR2: PD Inserted";
+			break;
+		case MPI_EVENT_IR2_RC_PD_REMOVED:
+			ds = "IR2: PD Removed";
+			break;
+		case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
+			ds = "IR2: Foreign CFG Detected";
+			break;
+		case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR:
+			ds = "IR2: Rebuild Medium Error";
+			break;
+		default:
+			ds = "IR2";
+		break;
+		}
+		break;
+	}
+	case MPI_EVENT_SAS_DISCOVERY:
+	{
+		if (evData0)
+			ds = "SAS Discovery: Start";
+		else
+			ds = "SAS Discovery: Stop";
+		break;
+	}
+	case MPI_EVENT_LOG_ENTRY_ADDED:
+		ds = "SAS Log Entry Added";
+		break;
 
 	/*
 	 *  MPT base "custom" events may be added here...
@@ -5989,12 +6012,12 @@ ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply
 	}
 
 	EventDescriptionStr(event, evData0, evStr);
-	devtprintk((MYIOC_s_INFO_FMT "MPT event (%s=%02Xh) detected!\n",
+	devtprintk((MYIOC_s_INFO_FMT "MPT event:(%02Xh) : %s\n",
 			ioc->name,
-			evStr,
-			event));
+			event,
+			evStr));
 
-#if defined(MPT_DEBUG) || defined(MPT_DEBUG_EVENTS)
+#if defined(MPT_DEBUG) || defined(MPT_DEBUG_VERBOSE_EVENTS)
 	printk(KERN_INFO MYNAM ": Event data:\n" KERN_INFO);
 	for (ii = 0; ii < evDataLen; ii++)
 		printk(" %08x", le32_to_cpu(pEventReply->Data[ii]));
@@ -6053,7 +6076,7 @@ ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply
 	 */
 	for (ii=MPT_MAX_PROTOCOL_DRIVERS-1; ii; ii--) {
 		if (MptEvHandlers[ii]) {
-			devtprintk((MYIOC_s_INFO_FMT "Routing Event to event handler #%d\n",
+			devtverboseprintk((MYIOC_s_INFO_FMT "Routing Event to event handler #%d\n",
 					ioc->name, ii));
 			r += (*(MptEvHandlers[ii]))(ioc, pEventReply);
 			handlers++;
@@ -6065,10 +6088,10 @@ ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply
 	 *  If needed, send (a single) EventAck.
 	 */
 	if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) {
-		devtprintk((MYIOC_s_WARN_FMT
+		devtverboseprintk((MYIOC_s_WARN_FMT
 			"EventAck required\n",ioc->name));
 		if ((ii = SendEventAck(ioc, pEventReply)) != 0) {
-			devtprintk((MYIOC_s_WARN_FMT "SendEventAck returned %d\n",
+			devtverboseprintk((MYIOC_s_WARN_FMT "SendEventAck returned %d\n",
 					ioc->name, ii));
 		}
 	}
@@ -6205,8 +6228,8 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
 		"Abort",					/* 12h */
 		"IO Not Yet Executed",				/* 13h */
 		"IO Executed",					/* 14h */
-		NULL,						/* 15h */
-		NULL,						/* 16h */
+		"Persistant Reservation Out Not Affiliation Owner", /* 15h */
+		"Open Transmit DMA Abort",			/* 16h */
 		NULL,						/* 17h */
 		NULL,						/* 18h */
 		NULL,						/* 19h */
@@ -6431,11 +6454,9 @@ EXPORT_SYMBOL(mpt_stm_index);
 EXPORT_SYMBOL(mpt_HardResetHandler);
 EXPORT_SYMBOL(mpt_config);
 EXPORT_SYMBOL(mpt_findImVolumes);
-EXPORT_SYMBOL(mpt_read_ioc_pg_3);
 EXPORT_SYMBOL(mpt_alloc_fw_memory);
 EXPORT_SYMBOL(mpt_free_fw_memory);
 EXPORT_SYMBOL(mptbase_sas_persist_operation);
-EXPORT_SYMBOL(mpt_alt_ioc_wait);
 EXPORT_SYMBOL(mptbase_GetFcPortPage0);
 
 

drivers/message/fusion/mptbase.h

@@ -76,8 +76,8 @@
 #define COPYRIGHT	"Copyright (c) 1999-2005 " MODULEAUTHOR
 #endif
 
-#define MPT_LINUX_VERSION_COMMON	"3.03.07"
-#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.03.07"
+#define MPT_LINUX_VERSION_COMMON	"3.03.08"
+#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.03.08"
 #define WHAT_MAGIC_STRING		"@" "(" "#" ")"
 
 #define show_mptmod_ver(s,ver)  \
@@ -331,6 +331,7 @@ typedef struct _SYSIF_REGS
  *	VirtDevice - FC LUN device or SCSI target device
  */
 typedef struct _VirtTarget {
+	struct scsi_target	*starget;
 	u8			 tflags;
 	u8			 ioc_id;
 	u8			 target_id;
@@ -343,14 +344,10 @@ typedef struct _VirtTarget {
 	u8			 type;		/* byte 0 of Inquiry data */
 	u32			 num_luns;
 	u32			 luns[8];		/* Max LUNs is 256 */
-	u8			 inq_data[8];
 } VirtTarget;
 
 typedef struct _VirtDevice {
-	VirtTarget	 	*vtarget;
-	u8			 ioc_id;
-	u8			 bus_id;
-	u8			 target_id;
+	VirtTarget		*vtarget;
 	u8			 configured_lun;
 	u32			 lun;
 } VirtDevice;
@@ -364,6 +361,7 @@ typedef struct _VirtDevice {
 #define MPT_TARGET_FLAGS_Q_YES		0x08
 #define MPT_TARGET_FLAGS_VALID_56	0x10
 #define MPT_TARGET_FLAGS_SAF_TE_ISSUED	0x20
+#define MPT_TARGET_FLAGS_RAID_COMPONENT	0x40
 
 /*
  *	/proc/mpt interface
@@ -447,13 +445,6 @@ typedef struct _mpt_ioctl_events {
  *	Substructure to store SCSI specific configuration page data
  */
 						/* dvStatus defines: */
-#define MPT_SCSICFG_NEGOTIATE		0x01	/* Negotiate on next IO */
-#define MPT_SCSICFG_NEED_DV		0x02	/* Schedule DV */
-#define MPT_SCSICFG_DV_PENDING		0x04	/* DV on this physical id pending */
-#define MPT_SCSICFG_DV_NOT_DONE		0x08	/* DV has not been performed */
-#define MPT_SCSICFG_BLK_NEGO		0x10	/* WriteSDP1 with WDTR and SDTR disabled */
-#define MPT_SCSICFG_RELOAD_IOC_PG3	0x20	/* IOC Pg 3 data is obsolete */
-						/* Args passed to writeSDP1: */
 #define MPT_SCSICFG_USE_NVRAM		0x01	/* WriteSDP1 using NVRAM */
 #define MPT_SCSICFG_ALL_IDS		0x02	/* WriteSDP1 to all IDS */
 /* #define MPT_SCSICFG_BLK_NEGO		0x10	   WriteSDP1 with WDTR and SDTR disabled */
@@ -464,7 +455,6 @@ typedef	struct _SpiCfgData {
 	IOCPage4_t	*pIocPg4;		/* SEP devices addressing */
 	dma_addr_t	 IocPg4_dma;		/* Phys Addr of IOCPage4 data */
 	int		 IocPg4Sz;		/* IOCPage4 size */
-	u8		 dvStatus[MPT_MAX_SCSI_DEVICES];
 	u8		 minSyncFactor;		/* 0xFF if async */
 	u8		 maxSyncOffset;		/* 0 if async */
 	u8		 maxBusWidth;		/* 0 if narrow, 1 if wide */
@@ -474,13 +464,11 @@ typedef	struct _SpiCfgData {
 	u8		 sdp0version;		/* SDP0 version */
 	u8		 sdp0length;		/* SDP0 length  */
 	u8		 dvScheduled;		/* 1 if scheduled */
-	u8		 forceDv;		/* 1 to force DV scheduling */
 	u8		 noQas;			/* Disable QAS for this adapter */
 	u8		 Saf_Te;		/* 1 to force all Processors as
 						 * SAF-TE if Inquiry data length
 						 * is too short to check for SAF-TE
 						 */
-	u8		 mpt_dv;		/* command line option: enhanced=1, basic=0 */
 	u8		 bus_reset;		/* 1 to allow bus reset */
 	u8		 rsvd[1];
 }SpiCfgData;
@@ -631,6 +619,10 @@ typedef struct _MPT_ADAPTER
 	struct net_device	*netdev;
 	struct list_head	 sas_topology;
 	struct mutex		 sas_topology_mutex;
+	struct mutex		 sas_discovery_mutex;
+	u8			 sas_discovery_runtime;
+	u8			 sas_discovery_ignore_events;
+	int			 sas_index; /* index refrencing */
 	MPT_SAS_MGMT		 sas_mgmt;
 	int			 num_ports;
 	struct work_struct	 mptscsih_persistTask;
@@ -728,12 +720,18 @@ typedef struct _mpt_sge {
 #define dhsprintk(x)
 #endif
 
-#ifdef MPT_DEBUG_EVENTS
+#if defined(MPT_DEBUG_EVENTS) || defined(MPT_DEBUG_VERBOSE_EVENTS)
 #define devtprintk(x)  printk x
 #else
 #define devtprintk(x)
 #endif
 
+#ifdef MPT_DEBUG_VERBOSE_EVENTS
+#define devtverboseprintk(x)  printk x
+#else
+#define devtverboseprintk(x)
+#endif
+
 #ifdef MPT_DEBUG_RESET
 #define drsprintk(x)  printk x
 #else
@@ -1030,10 +1028,8 @@ extern int	 mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *cfg);
 extern void	 mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size);
 extern void	 mpt_free_fw_memory(MPT_ADAPTER *ioc);
 extern int	 mpt_findImVolumes(MPT_ADAPTER *ioc);
-extern int	 mpt_read_ioc_pg_3(MPT_ADAPTER *ioc);
 extern int	 mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
 extern int	 mptbase_GetFcPortPage0(MPT_ADAPTER *ioc, int portnum);
-extern int	 mpt_alt_ioc_wait(MPT_ADAPTER *ioc);
 
 /*
  *  Public data decl's...

drivers/message/fusion/mptctl.c

@@ -140,7 +140,7 @@ static int  mptctl_ioc_reset(MPT_ADAPTER *ioc, int reset_phase);
  * Event Handler function
  */
 static int mptctl_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
-struct fasync_struct *async_queue=NULL;
+static struct fasync_struct *async_queue=NULL;
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
@@ -497,7 +497,7 @@ mptctl_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
 	 if (event == 0x21 ) {
 		ioc->aen_event_read_flag=1;
 		dctlprintk(("Raised SIGIO to application\n"));
-		devtprintk(("Raised SIGIO to application\n"));
+		devtverboseprintk(("Raised SIGIO to application\n"));
 		kill_fasync(&async_queue, SIGIO, POLL_IN);
 		return 1;
 	 }
@@ -515,7 +515,7 @@ mptctl_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
 	if (ioc->events && (ioc->eventTypes & ( 1 << event))) {
 		ioc->aen_event_read_flag=1;
 		dctlprintk(("Raised SIGIO to application\n"));
-		devtprintk(("Raised SIGIO to application\n"));
+		devtverboseprintk(("Raised SIGIO to application\n"));
 		kill_fasync(&async_queue, SIGIO, POLL_IN);
 	}
 	return 1;
@@ -2968,7 +2968,7 @@ static int __init mptctl_init(void)
 	}
 
 	if (mpt_event_register(mptctl_id, mptctl_event_process) == 0) {
-		devtprintk((KERN_INFO MYNAM
+		devtverboseprintk((KERN_INFO MYNAM
 		  ": Registered for IOC event notifications\n"));
 	}
 

drivers/message/fusion/mptfc.c

@@ -154,7 +154,7 @@ MODULE_DEVICE_TABLE(pci, mptfc_pci_table);
 
 static struct scsi_transport_template *mptfc_transport_template = NULL;
 
-struct fc_function_template mptfc_transport_functions = {
+static struct fc_function_template mptfc_transport_functions = {
 	.dd_fcrport_size = 8,
 	.show_host_node_name = 1,
 	.show_host_port_name = 1,
@@ -348,24 +348,6 @@ mptfc_generate_rport_ids(FCDevicePage0_t *pg0, struct fc_rport_identifiers *rid)
 	return 0;
 }
 
-static void
-mptfc_remap_sdev(struct scsi_device *sdev, void *arg)
-{
-	VirtDevice		*vdev;
-	VirtTarget		*vtarget;
-	struct scsi_target	*starget;
-
-	starget = scsi_target(sdev);
-	if (starget->hostdata == arg) {
-		vtarget = arg;
-		vdev = sdev->hostdata;
-		if (vdev) {
-			vdev->bus_id = vtarget->bus_id;
-			vdev->target_id = vtarget->target_id;
-		}
-	}
-}
-
 static void
 mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0)
 {
@@ -423,8 +405,6 @@ mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0)
 				if (vtarget) {
 					vtarget->target_id = pg0->CurrentTargetID;
 					vtarget->bus_id = pg0->CurrentBus;
-					starget_for_each_device(ri->starget,
-						vtarget,mptfc_remap_sdev);
 				}
 				ri->remap_needed = 0;
 			}
@@ -432,7 +412,7 @@ mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0)
 				"mptfc_reg_dev.%d: %x, %llx / %llx, tid %d, "
 				"rport tid %d, tmo %d\n",
 					ioc->name,
-					oc->sh->host_no,
+					ioc->sh->host_no,
 					pg0->PortIdentifier,
 					pg0->WWNN,
 					pg0->WWPN,
@@ -514,7 +494,7 @@ mptfc_target_alloc(struct scsi_target *starget)
  *	Return non-zero if allocation fails.
  *	Init memory once per LUN.
  */
-int
+static int
 mptfc_slave_alloc(struct scsi_device *sdev)
 {
 	MPT_SCSI_HOST		*hd;
@@ -553,23 +533,26 @@ mptfc_slave_alloc(struct scsi_device *sdev)
 	}
 
 	vdev->vtarget = vtarget;
-	vdev->ioc_id = hd->ioc->id;
 	vdev->lun = sdev->lun;
-	vdev->target_id = vtarget->target_id;
-	vdev->bus_id = vtarget->bus_id;
 
 	spin_unlock_irqrestore(&hd->ioc->fc_rport_lock,flags);
 
 	vtarget->num_luns++;
 
+#ifdef DMPT_DEBUG_FC
+	 {
+	struct mptfc_rport_info *ri;
+	ri = *((struct mptfc_rport_info **)rport->dd_data);
 	dfcprintk ((MYIOC_s_INFO_FMT
 		"mptfc_slv_alloc.%d: num_luns %d, sdev.id %d, "
 	        "CurrentTargetID %d, %x %llx %llx\n",
-		ioc->name,
+		hd->ioc->name,
 		sdev->host->host_no,
 		vtarget->num_luns,
 		sdev->id, ri->pg0.CurrentTargetID,
 		ri->pg0.PortIdentifier, ri->pg0.WWPN, ri->pg0.WWNN));
+	}
+#endif
 
 	return 0;
 }
@@ -941,7 +924,7 @@ mptfc_init(void)
 	mptfcInternalCtx = mpt_register(mptscsih_scandv_complete, MPTFC_DRIVER);
 
 	if (mpt_event_register(mptfcDoneCtx, mptscsih_event_process) == 0) {
-		devtprintk((KERN_INFO MYNAM
+		devtverboseprintk((KERN_INFO MYNAM
 		  ": Registered for IOC event notifications\n"));
 	}
 

drivers/message/fusion/mptlan.c

@@ -1152,10 +1152,7 @@ mpt_lan_receive_post_reply(struct net_device *dev,
 				priv->mpt_rxfidx_tail,
 				MPT_LAN_MAX_BUCKETS_OUT);
 
-		panic("Damn it Jim! I'm a doctor, not a programmer! "
-				"Oh, wait a sec, I am a programmer. "
-				"And, who's Jim?!?!\n"
-				"Arrgghh! We've done it again!\n");
+		return -1;
 	}
 
 	if (remaining == 0)

drivers/message/fusion/mptscsih.h

@@ -60,16 +60,6 @@
 
 #define MPT_SCSI_MAX_SECTORS    8192
 
-/* To disable domain validation, uncomment the
- * following line. No effect for FC devices.
- * For SCSI devices, driver will negotiate to
- * NVRAM settings (if available) or to maximum adapter
- * capabilities.
- */
-
-#define MPTSCSIH_ENABLE_DOMAIN_VALIDATION
-
-
 /* SCSI driver setup structure. Settings can be overridden
  * by command line options.
  */
@@ -109,3 +99,5 @@ extern int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
 extern int mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth);
 extern void mptscsih_timer_expired(unsigned long data);
 extern int mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 target, u8 lun, int ctx2abort, ulong timeout);
+extern int mptscsih_raid_id_to_num(MPT_SCSI_HOST *hd, uint physdiskid);
+extern int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id);

drivers/message/i2o/exec-osm.c

@@ -57,6 +57,13 @@ struct i2o_exec_wait {
 	struct list_head list;	/* node in global wait list */
 };
 
+/* Work struct needed to handle LCT NOTIFY replies */
+struct i2o_exec_lct_notify_work {
+	struct work_struct work;	/* work struct */
+	struct i2o_controller *c;	/* controller on which the LCT NOTIFY
+					   was received */
+};
+
 /* Exec OSM class handling definition */
 static struct i2o_class_id i2o_exec_class_id[] = {
 	{I2O_CLASS_EXECUTIVE},
@@ -355,9 +362,12 @@ static int i2o_exec_remove(struct device *dev)
  *	new LCT and if the buffer for the LCT was to small sends a LCT NOTIFY
  *	again, otherwise send LCT NOTIFY to get informed on next LCT change.
  */
-static void i2o_exec_lct_modified(struct i2o_controller *c)
+static void i2o_exec_lct_modified(struct i2o_exec_lct_notify_work *work)
 {
 	u32 change_ind = 0;
+	struct i2o_controller *c = work->c;
+
+	kfree(work);
 
 	if (i2o_device_parse_lct(c) != -EAGAIN)
 		change_ind = c->lct->change_ind + 1;
@@ -410,7 +420,7 @@ static int i2o_exec_reply(struct i2o_controller *c, u32 m,
 		return i2o_msg_post_wait_complete(c, m, msg, context);
 
 	if ((le32_to_cpu(msg->u.head[1]) >> 24) == I2O_CMD_LCT_NOTIFY) {
-		struct work_struct *work;
+		struct i2o_exec_lct_notify_work *work;
 
 		pr_debug("%s: LCT notify received\n", c->name);
 
@@ -418,8 +428,11 @@ static int i2o_exec_reply(struct i2o_controller *c, u32 m,
 		if (!work)
 			return -ENOMEM;
 
-		INIT_WORK(work, (void (*)(void *))i2o_exec_lct_modified, c);
-		queue_work(i2o_exec_driver.event_queue, work);
+		work->c = c;
+
+		INIT_WORK(&work->work, (void (*)(void *))i2o_exec_lct_modified,
+			  work);
+		queue_work(i2o_exec_driver.event_queue, &work->work);
 		return 1;
 	}
 

drivers/scsi/3w-9xxx.h

@@ -2,8 +2,9 @@
    3w-9xxx.h -- 3ware 9000 Storage Controller device driver for Linux.
 
    Written By: Adam Radford <linuxraid@amcc.com>
+   Modifications By: Tom Couch <linuxraid@amcc.com>
 
-   Copyright (C) 2004-2005 Applied Micro Circuits Corporation.
+   Copyright (C) 2004-2006 Applied Micro Circuits Corporation.
 
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
@@ -287,9 +288,6 @@ static twa_message_type twa_error_table[] = {
 #define TW_STATUS_UNEXPECTED_BITS	       0x00F00000
 #define TW_STATUS_VALID_INTERRUPT              0x00DF0000
 
-/* RESPONSE QUEUE BIT DEFINITIONS */
-#define TW_RESPONSE_ID_MASK		       0x00000FF0
-
 /* PCI related defines */
 #define TW_NUMDEVICES 1
 #define TW_PCI_CLEAR_PARITY_ERRORS 0xc100
@@ -471,6 +469,7 @@ printk(KERN_WARNING "3w-9xxx: ERROR: (0x%02X:0x%04X): %s.\n",a,b,c); \
 #define TW_APACHE_MAX_SGL_LENGTH (sizeof(dma_addr_t) > 4 ? 72 : 109)
 #define TW_ESCALADE_MAX_SGL_LENGTH (sizeof(dma_addr_t) > 4 ? 41 : 62)
 #define TW_PADDING_LENGTH (sizeof(dma_addr_t) > 4 ? 8 : 0)
+#define TW_CPU_TO_SGL(x) (sizeof(dma_addr_t) > 4 ? cpu_to_le64(x) : cpu_to_le32(x))
 
 #pragma pack(1)
 
@@ -614,13 +613,6 @@ typedef union TAG_TW_Response_Queue {
 	u32 value;
 } TW_Response_Queue;
 
-typedef struct TAG_TW_Info {
-	char *buffer;
-	int length;
-	int offset;
-	int position;
-} TW_Info;
-
 /* Compatibility information structure */
 typedef struct TAG_TW_Compatibility_Info
 {
@@ -636,6 +628,8 @@ typedef struct TAG_TW_Compatibility_Info
 	unsigned short driver_build_low;
 } TW_Compatibility_Info;
 
+#pragma pack()
+
 typedef struct TAG_TW_Device_Extension {
 	u32                     __iomem *base_addr;
 	unsigned long	       	*generic_buffer_virt[TW_Q_LENGTH];
@@ -679,7 +673,5 @@ typedef struct TAG_TW_Device_Extension {
 	unsigned short		working_build;
 } TW_Device_Extension;
 
-#pragma pack()
-
 #endif /* _3W_9XXX_H */
 

drivers/scsi/53c700.c

@@ -238,14 +238,6 @@ static char *NCR_700_SBCL_to_phase[] = {
 	"MSG IN",
 };
 
-static __u8 NCR_700_SDTR_msg[] = {
-	0x01,			/* Extended message */
-	0x03,			/* Extended message Length */
-	0x01,			/* SDTR Extended message */
-	NCR_700_MIN_PERIOD,
-	NCR_700_MAX_OFFSET
-};
-
 /* This translates the SDTR message offset and period to a value
  * which can be loaded into the SXFER_REG.
  *
@@ -266,7 +258,7 @@ NCR_700_offset_period_to_sxfer(struct NCR_700_Host_Parameters *hostdata,
 		return 0;
 
 	if(period < hostdata->min_period) {
-		printk(KERN_WARNING "53c700: Period %dns is less than this chip's minimum, setting to %d\n", period*4, NCR_700_SDTR_msg[3]*4);
+		printk(KERN_WARNING "53c700: Period %dns is less than this chip's minimum, setting to %d\n", period*4, NCR_700_MIN_PERIOD*4);
 		period = hostdata->min_period;
 	}
 	XFERP = (period*4 * hostdata->sync_clock)/1000 - 4;
@@ -1434,11 +1426,9 @@ NCR_700_start_command(struct scsi_cmnd *SCp)
 
 	if(hostdata->fast &&
 	   NCR_700_is_flag_clear(SCp->device, NCR_700_DEV_NEGOTIATED_SYNC)) {
-		memcpy(&hostdata->msgout[count], NCR_700_SDTR_msg,
-		       sizeof(NCR_700_SDTR_msg));
-		hostdata->msgout[count+3] = spi_period(SCp->device->sdev_target);
-		hostdata->msgout[count+4] = spi_offset(SCp->device->sdev_target);
-		count += sizeof(NCR_700_SDTR_msg);
+		count += spi_populate_sync_msg(&hostdata->msgout[count],
+				spi_period(SCp->device->sdev_target),
+				spi_offset(SCp->device->sdev_target));
 		NCR_700_set_flag(SCp->device, NCR_700_DEV_BEGIN_SYNC_NEGOTIATION);
 	}
 

drivers/scsi/NCR_D700.c

@@ -218,7 +218,7 @@ NCR_D700_probe_one(struct NCR_D700_private *p, int siop, int irq,
 	return 0;
 
  detect_failed:
-	release_region(host->base, 64);
+	release_region(region, 64);
  region_failed:
 	kfree(hostdata);
 

drivers/scsi/aacraid/aacraid.h

@@ -997,7 +997,7 @@ struct aac_dev
 	int			maximum_num_physicals;
 	int			maximum_num_channels;
 	struct fsa_dev_info	*fsa_dev;
-	pid_t			thread_pid;
+	struct task_struct	*thread;
 	int			cardtype;
 	
 	/*
@@ -1017,7 +1017,6 @@ struct aac_dev
 	 *	AIF thread states
 	 */
 	u32			aif_thread;
-	struct completion	aif_completion;
 	struct aac_adapter_info adapter_info;
 	struct aac_supplement_adapter_info supplement_adapter_info;
 	/* These are in adapter info but they are in the io flow so
@@ -1797,7 +1796,7 @@ int aac_sa_init(struct aac_dev *dev);
 unsigned int aac_response_normal(struct aac_queue * q);
 unsigned int aac_command_normal(struct aac_queue * q);
 unsigned int aac_intr_normal(struct aac_dev * dev, u32 Index);
-int aac_command_thread(struct aac_dev * dev);
+int aac_command_thread(void *data);
 int aac_close_fib_context(struct aac_dev * dev, struct aac_fib_context *fibctx);
 int aac_fib_adapter_complete(struct fib * fibptr, unsigned short size);
 struct aac_driver_ident* aac_get_driver_ident(int devtype);

drivers/scsi/aacraid/comminit.c

@@ -433,7 +433,6 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev)
 	}
 		
 	INIT_LIST_HEAD(&dev->fib_list);
-	init_completion(&dev->aif_completion);
 
 	return dev;
 }

drivers/scsi/aacraid/commsup.c

@@ -39,6 +39,7 @@
 #include <linux/completion.h>
 #include <linux/blkdev.h>
 #include <linux/delay.h>
+#include <linux/kthread.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_device.h>
 #include <asm/semaphore.h>
@@ -1045,8 +1046,9 @@ static void aac_handle_aif(struct aac_dev * dev, struct fib * fibptr)
  *	more FIBs.
  */
  
-int aac_command_thread(struct aac_dev * dev)
+int aac_command_thread(void *data)
 {
+	struct aac_dev *dev = data;
 	struct hw_fib *hw_fib, *hw_newfib;
 	struct fib *fib, *newfib;
 	struct aac_fib_context *fibctx;
@@ -1058,12 +1060,7 @@ int aac_command_thread(struct aac_dev * dev)
 	 */
 	if (dev->aif_thread)
 		return -EINVAL;
-	/*
-	 *	Set up the name that will appear in 'ps'
-	 *	stored in  task_struct.comm[16].
-	 */
-	daemonize("aacraid");
-	allow_signal(SIGKILL);
+
 	/*
 	 *	Let the DPC know it has a place to send the AIF's to.
 	 */
@@ -1266,13 +1263,12 @@ int aac_command_thread(struct aac_dev * dev)
 		spin_unlock_irqrestore(dev->queues->queue[HostNormCmdQueue].lock, flags);
 		schedule();
 
-		if(signal_pending(current))
+		if (kthread_should_stop())
 			break;
 		set_current_state(TASK_INTERRUPTIBLE);
 	}
 	if (dev->queues)
 		remove_wait_queue(&dev->queues->queue[HostNormCmdQueue].cmdready, &wait);
 	dev->aif_thread = 0;
-	complete_and_exit(&dev->aif_completion, 0);
 	return 0;
 }