提交 2012c87f 编写于 作者: D Dmitri Belimov 提交者: Mauro Carvalho Chehab

V4L/DVB (12587): Add support BeholdTV X7 card

Add support our new TV card based on xc5000 and saa7134.
Analog TV works well.
Signed-off-by: NBeholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 736dadaa
......@@ -169,3 +169,4 @@
168 -> Beholder BeholdTV 609 RDS [5ace:6093]
169 -> Compro VideoMate S350/S300 [185b:c900]
170 -> AverMedia AverTV Studio 505 [1461:a115]
171 -> Beholder BeholdTV X7 [5ace:7595]
......@@ -32,6 +32,7 @@
#include <media/tveeprom.h>
#include "tea5767.h"
#include "tda18271.h"
#include "xc5000.h"
/* commly used strings */
static char name_mute[] = "mute";
......@@ -5179,6 +5180,34 @@ struct saa7134_board saa7134_boards[] = {
.amux = LINE1
} },
},
[SAA7134_BOARD_BEHOLD_X7] = {
/* Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> */
.name = "Beholder BeholdTV X7",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_XC5000,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.inputs = { {
.name = name_tv,
.vmux = 2,
.amux = TV,
.tv = 1,
}, {
.name = name_comp1,
.vmux = 0,
.amux = LINE1,
}, {
.name = name_svideo,
.vmux = 9,
.amux = LINE1,
} },
.radio = {
.name = name_radio,
.amux = TV,
},
},
};
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
......@@ -6298,6 +6327,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
.subvendor = 0x185b,
.subdevice = 0xc900,
.driver_data = SAA7134_BOARD_VIDEOMATE_S350,
}, {
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x5ace, /* Beholder Intl. Ltd. */
.subdevice = 0x7595,
.driver_data = SAA7134_BOARD_BEHOLD_X7,
}, {
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
......@@ -6384,6 +6419,32 @@ static int saa7134_xc2028_callback(struct saa7134_dev *dev,
return -EINVAL;
}
static int saa7134_xc5000_callback(struct saa7134_dev *dev,
int command, int arg)
{
switch (dev->board) {
case SAA7134_BOARD_BEHOLD_X7:
if (command == XC5000_TUNER_RESET) {
/* Down and UP pheripherial RESET pin for reset all chips */
saa_writeb(SAA7134_SPECIAL_MODE, 0x00);
msleep(10);
saa_writeb(SAA7134_SPECIAL_MODE, 0x01);
msleep(10);
}
break;
default:
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x06e20000, 0x06e20000);
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x06a20000, 0x06a20000);
saa_andorl(SAA7133_ANALOG_IO_SELECT >> 2, 0x02, 0x02);
saa_andorl(SAA7134_ANALOG_IN_CTRL1 >> 2, 0x81, 0x81);
saa_andorl(SAA7134_AUDIO_CLOCK0 >> 2, 0x03187de7, 0x03187de7);
saa_andorl(SAA7134_AUDIO_PLL_CTRL >> 2, 0x03, 0x03);
saa_andorl(SAA7134_AUDIO_CLOCKS_PER_FIELD0 >> 2,
0x0001e000, 0x0001e000);
break;
}
return 0;
}
static int saa7134_tda8290_827x_callback(struct saa7134_dev *dev,
int command, int arg)
......@@ -6480,6 +6541,8 @@ int saa7134_tuner_callback(void *priv, int component, int command, int arg)
return saa7134_tda8290_callback(dev, command, arg);
case TUNER_XC2028:
return saa7134_xc2028_callback(dev, command, arg);
case TUNER_XC5000:
return saa7134_xc5000_callback(dev, command, arg);
}
} else {
printk(KERN_ERR "saa7134: Error - device struct undefined.\n");
......@@ -6728,6 +6791,7 @@ int saa7134_board_init1(struct saa7134_dev *dev)
case SAA7134_BOARD_BEHOLD_M63:
case SAA7134_BOARD_BEHOLD_M6_EXTRA:
case SAA7134_BOARD_BEHOLD_H6:
case SAA7134_BOARD_BEHOLD_X7:
dev->has_remote = SAA7134_REMOTE_I2C;
break;
case SAA7134_BOARD_AVERMEDIA_A169_B:
......
......@@ -765,6 +765,7 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
case SAA7134_BOARD_BEHOLD_M63:
case SAA7134_BOARD_BEHOLD_M6_EXTRA:
case SAA7134_BOARD_BEHOLD_H6:
case SAA7134_BOARD_BEHOLD_X7:
init_data.name = "BeholdTV";
init_data.get_key = get_key_beholdm6xx;
init_data.ir_codes = ir_codes_behold;
......
......@@ -294,6 +294,7 @@ struct saa7134_format {
#define SAA7134_BOARD_BEHOLD_609RDS_MK5 168
#define SAA7134_BOARD_VIDEOMATE_S350 169
#define SAA7134_BOARD_AVERMEDIA_STUDIO_505 170
#define SAA7134_BOARD_BEHOLD_X7 171
#define SAA7134_MAXBOARDS 32
#define SAA7134_INPUT_MAX 8
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册