提交 2004290f 编写于 作者: P Paul Walmsley 提交者: Kevin Hilman

OMAP2xxx: hwmod: add I2C hwmods for OMAP2420, 2430

Add hwmod structures for I2C controllers on OMAP2420/2430.

NOTE: I2C module on OMAP2420 has 16bit registers and causes imprecise
aborts if 32bits are read/written to it.  Use the HWMOD_16BIT_REG flag
to notify the hmwod framework of this hard requirement so that
__raw_writew/readw is used to read /write the mdoule registers.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
上级 c8ddb271
......@@ -126,8 +126,12 @@
#define OMAP24XX_ST_HDQ_MASK (1 << 23)
#define OMAP2420_ST_I2C2_SHIFT 20
#define OMAP2420_ST_I2C2_MASK (1 << 20)
#define OMAP2430_ST_I2CHS1_SHIFT 19
#define OMAP2430_ST_I2CHS1_MASK (1 << 19)
#define OMAP2420_ST_I2C1_SHIFT 19
#define OMAP2420_ST_I2C1_MASK (1 << 19)
#define OMAP2430_ST_I2CHS2_SHIFT 20
#define OMAP2430_ST_I2CHS2_MASK (1 << 20)
#define OMAP24XX_ST_MCBSP2_SHIFT 16
#define OMAP24XX_ST_MCBSP2_MASK (1 << 16)
#define OMAP24XX_ST_MCBSP1_SHIFT 15
......
......@@ -16,11 +16,13 @@
#include <plat/cpu.h>
#include <plat/dma.h>
#include <plat/serial.h>
#include <plat/i2c.h>
#include <plat/omap24xx.h>
#include "omap_hwmod_common_data.h"
#include "prm-regbits-24xx.h"
#include "cm-regbits-24xx.h"
#include "prm-regbits-24xx.h"
/*
* OMAP2420 hardware module integration data
......@@ -77,6 +79,8 @@ static struct omap_hwmod omap2420_l4_wkup_hwmod;
static struct omap_hwmod omap2420_uart1_hwmod;
static struct omap_hwmod omap2420_uart2_hwmod;
static struct omap_hwmod omap2420_uart3_hwmod;
static struct omap_hwmod omap2420_i2c1_hwmod;
static struct omap_hwmod omap2420_i2c2_hwmod;
/* L4_CORE -> L4_WKUP interface */
static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = {
......@@ -139,6 +143,45 @@ static struct omap_hwmod_ocp_if omap2_l4_core__uart3 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* I2C IP block address space length (in bytes) */
#define OMAP2_I2C_AS_LEN 128
/* L4 CORE -> I2C1 interface */
static struct omap_hwmod_addr_space omap2420_i2c1_addr_space[] = {
{
.pa_start = 0x48070000,
.pa_end = 0x48070000 + OMAP2_I2C_AS_LEN - 1,
.flags = ADDR_TYPE_RT,
},
};
static struct omap_hwmod_ocp_if omap2420_l4_core__i2c1 = {
.master = &omap2420_l4_core_hwmod,
.slave = &omap2420_i2c1_hwmod,
.clk = "i2c1_ick",
.addr = omap2420_i2c1_addr_space,
.addr_cnt = ARRAY_SIZE(omap2420_i2c1_addr_space),
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 CORE -> I2C2 interface */
static struct omap_hwmod_addr_space omap2420_i2c2_addr_space[] = {
{
.pa_start = 0x48072000,
.pa_end = 0x48072000 + OMAP2_I2C_AS_LEN - 1,
.flags = ADDR_TYPE_RT,
},
};
static struct omap_hwmod_ocp_if omap2420_l4_core__i2c2 = {
.master = &omap2420_l4_core_hwmod,
.slave = &omap2420_i2c2_hwmod,
.clk = "i2c2_ick",
.addr = omap2420_i2c2_addr_space,
.addr_cnt = ARRAY_SIZE(omap2420_i2c2_addr_space),
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* Slave interfaces on the L4_CORE interconnect */
static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = {
&omap2420_l3_main__l4_core,
......@@ -150,6 +193,8 @@ static struct omap_hwmod_ocp_if *omap2420_l4_core_masters[] = {
&omap2_l4_core__uart1,
&omap2_l4_core__uart2,
&omap2_l4_core__uart3,
&omap2420_l4_core__i2c1,
&omap2420_l4_core__i2c2
};
/* L4 CORE */
......@@ -418,6 +463,100 @@ static struct omap_hwmod omap2420_uart3_hwmod = {
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
};
/* I2C common */
static struct omap_hwmod_class_sysconfig i2c_sysc = {
.rev_offs = 0x00,
.sysc_offs = 0x20,
.syss_offs = 0x10,
.sysc_flags = SYSC_HAS_SOFTRESET,
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class i2c_class = {
.name = "i2c",
.sysc = &i2c_sysc,
};
static struct omap_i2c_dev_attr i2c_dev_attr;
/* I2C1 */
static struct omap_hwmod_irq_info i2c1_mpu_irqs[] = {
{ .irq = INT_24XX_I2C1_IRQ, },
};
static struct omap_hwmod_dma_info i2c1_sdma_reqs[] = {
{ .name = "tx", .dma_req = OMAP24XX_DMA_I2C1_TX },
{ .name = "rx", .dma_req = OMAP24XX_DMA_I2C1_RX },
};
static struct omap_hwmod_ocp_if *omap2420_i2c1_slaves[] = {
&omap2420_l4_core__i2c1,
};
static struct omap_hwmod omap2420_i2c1_hwmod = {
.name = "i2c1",
.mpu_irqs = i2c1_mpu_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(i2c1_mpu_irqs),
.sdma_reqs = i2c1_sdma_reqs,
.sdma_reqs_cnt = ARRAY_SIZE(i2c1_sdma_reqs),
.main_clk = "i2c1_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 1,
.module_bit = OMAP2420_EN_I2C1_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP2420_ST_I2C1_SHIFT,
},
},
.slaves = omap2420_i2c1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_i2c1_slaves),
.class = &i2c_class,
.dev_attr = &i2c_dev_attr,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_16BIT_REG,
};
/* I2C2 */
static struct omap_hwmod_irq_info i2c2_mpu_irqs[] = {
{ .irq = INT_24XX_I2C2_IRQ, },
};
static struct omap_hwmod_dma_info i2c2_sdma_reqs[] = {
{ .name = "tx", .dma_req = OMAP24XX_DMA_I2C2_TX },
{ .name = "rx", .dma_req = OMAP24XX_DMA_I2C2_RX },
};
static struct omap_hwmod_ocp_if *omap2420_i2c2_slaves[] = {
&omap2420_l4_core__i2c2,
};
static struct omap_hwmod omap2420_i2c2_hwmod = {
.name = "i2c2",
.mpu_irqs = i2c2_mpu_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(i2c2_mpu_irqs),
.sdma_reqs = i2c2_sdma_reqs,
.sdma_reqs_cnt = ARRAY_SIZE(i2c2_sdma_reqs),
.main_clk = "i2c2_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 1,
.module_bit = OMAP2420_EN_I2C2_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP2420_ST_I2C2_SHIFT,
},
},
.slaves = omap2420_i2c2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2420_i2c2_slaves),
.class = &i2c_class,
.dev_attr = &i2c_dev_attr,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
.flags = HWMOD_16BIT_REG,
};
static __initdata struct omap_hwmod *omap2420_hwmods[] = {
&omap2420_l3_main_hwmod,
&omap2420_l4_core_hwmod,
......@@ -428,6 +567,8 @@ static __initdata struct omap_hwmod *omap2420_hwmods[] = {
&omap2420_uart1_hwmod,
&omap2420_uart2_hwmod,
&omap2420_uart3_hwmod,
&omap2420_i2c1_hwmod,
&omap2420_i2c2_hwmod,
NULL,
};
......@@ -435,5 +576,3 @@ int __init omap2420_hwmod_init(void)
{
return omap_hwmod_init(omap2420_hwmods);
}
......@@ -16,6 +16,8 @@
#include <plat/cpu.h>
#include <plat/dma.h>
#include <plat/serial.h>
#include <plat/i2c.h>
#include <plat/omap24xx.h>
#include "omap_hwmod_common_data.h"
......@@ -77,6 +79,47 @@ static struct omap_hwmod omap2430_l4_wkup_hwmod;
static struct omap_hwmod omap2430_uart1_hwmod;
static struct omap_hwmod omap2430_uart2_hwmod;
static struct omap_hwmod omap2430_uart3_hwmod;
static struct omap_hwmod omap2430_i2c1_hwmod;
static struct omap_hwmod omap2430_i2c2_hwmod;
/* I2C IP block address space length (in bytes) */
#define OMAP2_I2C_AS_LEN 128
/* L4 CORE -> I2C1 interface */
static struct omap_hwmod_addr_space omap2430_i2c1_addr_space[] = {
{
.pa_start = 0x48070000,
.pa_end = 0x48070000 + OMAP2_I2C_AS_LEN - 1,
.flags = ADDR_TYPE_RT,
},
};
static struct omap_hwmod_ocp_if omap2430_l4_core__i2c1 = {
.master = &omap2430_l4_core_hwmod,
.slave = &omap2430_i2c1_hwmod,
.clk = "i2c1_ick",
.addr = omap2430_i2c1_addr_space,
.addr_cnt = ARRAY_SIZE(omap2430_i2c1_addr_space),
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 CORE -> I2C2 interface */
static struct omap_hwmod_addr_space omap2430_i2c2_addr_space[] = {
{
.pa_start = 0x48072000,
.pa_end = 0x48072000 + OMAP2_I2C_AS_LEN - 1,
.flags = ADDR_TYPE_RT,
},
};
static struct omap_hwmod_ocp_if omap2430_l4_core__i2c2 = {
.master = &omap2430_l4_core_hwmod,
.slave = &omap2430_i2c2_hwmod,
.clk = "i2c2_ick",
.addr = omap2430_i2c2_addr_space,
.addr_cnt = ARRAY_SIZE(omap2430_i2c2_addr_space),
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4_CORE -> L4_WKUP interface */
static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = {
......@@ -418,6 +461,114 @@ static struct omap_hwmod omap2430_uart3_hwmod = {
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* I2C common */
static struct omap_hwmod_class_sysconfig i2c_sysc = {
.rev_offs = 0x00,
.sysc_offs = 0x20,
.syss_offs = 0x10,
.sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class i2c_class = {
.name = "i2c",
.sysc = &i2c_sysc,
};
static struct omap_i2c_dev_attr i2c_dev_attr;
/* I2C1 */
static struct omap_i2c_dev_attr i2c1_dev_attr = {
.fifo_depth = 8, /* bytes */
};
static struct omap_hwmod_irq_info i2c1_mpu_irqs[] = {
{ .irq = INT_24XX_I2C1_IRQ, },
};
static struct omap_hwmod_dma_info i2c1_sdma_reqs[] = {
{ .name = "tx", .dma_req = OMAP24XX_DMA_I2C1_TX },
{ .name = "rx", .dma_req = OMAP24XX_DMA_I2C1_RX },
};
static struct omap_hwmod_ocp_if *omap2430_i2c1_slaves[] = {
&omap2430_l4_core__i2c1,
};
static struct omap_hwmod omap2430_i2c1_hwmod = {
.name = "i2c1",
.mpu_irqs = i2c1_mpu_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(i2c1_mpu_irqs),
.sdma_reqs = i2c1_sdma_reqs,
.sdma_reqs_cnt = ARRAY_SIZE(i2c1_sdma_reqs),
.main_clk = "i2chs1_fck",
.prcm = {
.omap2 = {
/*
* NOTE: The CM_FCLKEN* and CM_ICLKEN* for
* I2CHS IP's do not follow the usual pattern.
* prcm_reg_id alone cannot be used to program
* the iclk and fclk. Needs to be handled using
* additonal flags when clk handling is moved
* to hwmod framework.
*/
.module_offs = CORE_MOD,
.prcm_reg_id = 1,
.module_bit = OMAP2430_EN_I2CHS1_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP2430_ST_I2CHS1_SHIFT,
},
},
.slaves = omap2430_i2c1_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_i2c1_slaves),
.class = &i2c_class,
.dev_attr = &i2c1_dev_attr,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
/* I2C2 */
static struct omap_i2c_dev_attr i2c2_dev_attr = {
.fifo_depth = 8, /* bytes */
};
static struct omap_hwmod_irq_info i2c2_mpu_irqs[] = {
{ .irq = INT_24XX_I2C2_IRQ, },
};
static struct omap_hwmod_dma_info i2c2_sdma_reqs[] = {
{ .name = "tx", .dma_req = OMAP24XX_DMA_I2C2_TX },
{ .name = "rx", .dma_req = OMAP24XX_DMA_I2C2_RX },
};
static struct omap_hwmod_ocp_if *omap2430_i2c2_slaves[] = {
&omap2430_l4_core__i2c2,
};
static struct omap_hwmod omap2430_i2c2_hwmod = {
.name = "i2c2",
.mpu_irqs = i2c2_mpu_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(i2c2_mpu_irqs),
.sdma_reqs = i2c2_sdma_reqs,
.sdma_reqs_cnt = ARRAY_SIZE(i2c2_sdma_reqs),
.main_clk = "i2chs2_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 1,
.module_bit = OMAP2430_EN_I2CHS2_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP2430_ST_I2CHS2_SHIFT,
},
},
.slaves = omap2430_i2c2_slaves,
.slaves_cnt = ARRAY_SIZE(omap2430_i2c2_slaves),
.class = &i2c_class,
.dev_attr = &i2c2_dev_attr,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
};
static __initdata struct omap_hwmod *omap2430_hwmods[] = {
&omap2430_l3_main_hwmod,
&omap2430_l4_core_hwmod,
......@@ -428,6 +579,8 @@ static __initdata struct omap_hwmod *omap2430_hwmods[] = {
&omap2430_uart1_hwmod,
&omap2430_uart2_hwmod,
&omap2430_uart3_hwmod,
&omap2430_i2c1_hwmod,
&omap2430_i2c2_hwmod,
NULL,
};
......@@ -435,5 +588,3 @@ int __init omap2430_hwmod_init(void)
{
return omap_hwmod_init(omap2430_hwmods);
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册