tg3: Fix 57765 B0 data corruption

The PCIe max FTS limit is too aggressive on these chips.  This patch
loosens the limit a little to eliminate data corruption issues.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Reviewed-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/tg3.c

@@ -7990,6 +7990,22 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 			tw32(GRC_MODE, grc_mode);
 		}
 
+		if (GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_57765_AX) {
+			u32 grc_mode = tr32(GRC_MODE);
+
+			/* Access the lower 1K of DL PCIE block registers. */
+			val = grc_mode & ~GRC_MODE_PCIE_PORT_MASK;
+			tw32(GRC_MODE, val | GRC_MODE_PCIE_DL_SEL);
+
+			val = tr32(TG3_PCIE_TLDLPL_PORT +
+				   TG3_PCIE_DL_LO_FTSMAX);
+			val &= ~TG3_PCIE_DL_LO_FTSMAX_MSK;
+			tw32(TG3_PCIE_TLDLPL_PORT + TG3_PCIE_DL_LO_FTSMAX,
+			     val | TG3_PCIE_DL_LO_FTSMAX_VAL);
+
+			tw32(GRC_MODE, grc_mode);
+		}
+
 		val = tr32(TG3_CPMU_LSPD_10MB_CLK);
 		val &= ~CPMU_LSPD_10MB_MACCLK_MASK;
 		val |= CPMU_LSPD_10MB_MACCLK_6_25;

drivers/net/tg3.h

@@ -180,6 +180,7 @@
 #define   CHIPREV_5750_BX		 0x41
 #define   CHIPREV_5784_AX		 0x57840
 #define   CHIPREV_5761_AX		 0x57610
+#define   CHIPREV_57765_AX		 0x577650
 #define  GET_METAL_REV(CHIP_REV_ID)	((CHIP_REV_ID) & 0xff)
 #define   METAL_REV_A0			 0x00
 #define   METAL_REV_A1			 0x01
@@ -1951,6 +1952,9 @@
 
 /* Alternate PCIE definitions */
 #define TG3_PCIE_TLDLPL_PORT		0x00007c00
+#define TG3_PCIE_DL_LO_FTSMAX		0x0000000c
+#define TG3_PCIE_DL_LO_FTSMAX_MSK	0x000000ff
+#define TG3_PCIE_DL_LO_FTSMAX_VAL	0x0000002c
 #define TG3_PCIE_PL_LO_PHYCTL1		 0x00000004
 #define TG3_PCIE_PL_LO_PHYCTL1_L1PLLPD_EN	  0x00001000
 #define TG3_PCIE_PL_LO_PHYCTL5		 0x00000014