Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (21 commits)
  sh: fix sh2a cache entry_mask
  sh: Enable NFS root in Migo-R defconfig.
  sh: FTRACE renamed to FUNCTION_TRACER.
  sh: Fix up the shared IRQ demuxer's control bit testing logic.
  Define SCSPTR1 for SH 7751R
  sh: Add sci_rxd_in of SH4-202
  Add support usb setting on sh 7366
  sh: Change register name SCSPTR to SCSPTR2
  sh: use the new byteorder headers.
  sh: SHmedia ISA tuning fixups.
  sh: Kill off long-dead HD64465 cchip support.
  sh: Revert "SH 7366 needs SCIF_ONLY"
  sh: Simplify and lock down the ISA tuning.
  sh: sh7785lcr: Select uImage as default image target.
  sh: Add on-chip RTC support for SH7722.
  SH 7366 needs SCIF_ONLY
  gdrom: Fix compile error
  sh: Provide a sample defconfig for the UL2 (SH7366) board.
  sh: Fix FPU tuning on toolchains with mismatched multilib targets.
  sh: oprofile: Fix up the SH7750 performance counter name.
  ...

Documentation/sh/new-machine.txt

@@ -47,9 +47,7 @@ Next, for companion chips:
     `-- sh
         `-- cchips
             `-- hd6446x
-                |-- hd64461
-                |   `-- cchip-specific files
-                `-- hd64465
+                `-- hd64461
                     `-- cchip-specific files
 
 ... and so on. Headers for the companion chips are treated the same way as

arch/sh/Kconfig

@@ -24,7 +24,7 @@ config SUPERH32
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
 	select HAVE_ARCH_TRACEHOOK
-	select HAVE_FTRACE
+	select HAVE_FUNCTION_TRACER
 
 config SUPERH64
 	def_bool y if CPU_SH5

arch/sh/Makefile

@@ -2,7 +2,7 @@
 # arch/sh/Makefile
 #
 # Copyright (C) 1999  Kaz Kojima
-# Copyright (C) 2002, 2003, 2004  Paul Mundt
+# Copyright (C) 2002 - 2008  Paul Mundt
 # Copyright (C) 2002  M. R. Brown
 #
 # This file is subject to the terms and conditions of the GNU General Public
@@ -18,16 +18,12 @@ isa-$(CONFIG_CPU_SH4)			:= sh4
 isa-$(CONFIG_CPU_SH4A)			:= sh4a
 isa-$(CONFIG_CPU_SH4AL_DSP)		:= sh4al
 isa-$(CONFIG_CPU_SH5)			:= shmedia
-isa-$(CONFIG_SH_DSP)			:= $(isa-y)-dsp
 
-ifndef CONFIG_SH_DSP
-ifndef CONFIG_SH_FPU
-isa-y			:= $(isa-y)-nofpu
-endif
+ifeq ($(CONFIG_SUPERH32),y)
+isa-$(CONFIG_SH_DSP)			:= $(isa-y)-dsp
+isa-y					:= $(isa-y)-up
 endif
 
-isa-y			:= $(isa-y)-up
-
 cflags-$(CONFIG_CPU_SH2)		:= $(call cc-option,-m2,)
 cflags-$(CONFIG_CPU_SH2A)		+= $(call cc-option,-m2a,) \
 					   $(call cc-option,-m2a-nofpu,)
@@ -38,6 +34,22 @@ cflags-$(CONFIG_CPU_SH4A)		+= $(call cc-option,-m4a,) \
 					   $(call cc-option,-m4a-nofpu,)
 cflags-$(CONFIG_CPU_SH5)		:= $(call cc-option,-m5-32media-nofpu,)
 
+ifeq ($(cflags-y),)
+#
+# In the case where we are stuck with a compiler that has been uselessly
+# restricted to a particular ISA, a favourite default of newer GCCs when
+# extensive multilib targets are not provided, ensure we get the best fit
+# regarding FP generation. This is necessary to avoid references to FP
+# variants in libgcc where integer variants exist, which otherwise result
+# in link errors. This is intentionally stupid (albeit many orders of
+# magnitude less than GCC's default behaviour), as anything with a large
+# number of multilib targets better have been built correctly for
+# the target in mind.
+#
+cflags-y	+= $(shell $(CC) $(KBUILD_CFLAGS) -print-multi-lib | \
+		     grep nofpu | sed q | sed -e 's/^/-/;s/;.*$$//')
+endif
+
 cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= -mb
 cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -ml
 
@@ -65,7 +77,8 @@ OBJCOPYFLAGS	:= -O binary -R .note -R .note.gnu.build-id -R .comment \
 		   -R .stab -R .stabstr -S
 
 # Give the various platforms the opportunity to set default image types
-defaultimage-$(CONFIG_SUPERH32)	:= zImage
+defaultimage-$(CONFIG_SUPERH32)			:= zImage
+defaultimage-$(CONFIG_SH_SH7785LCR)		:= uImage
 
 # Set some sensible Kbuild defaults
 KBUILD_DEFCONFIG	:= shx3_defconfig

arch/sh/boot/compressed/Makefile_32

@@ -23,7 +23,7 @@ IMAGE_OFFSET	:= $(shell /bin/bash -c 'printf "0x%08x" \
 
 LIBGCC	:= $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
 
-ifeq ($(CONFIG_FTRACE),y)
+ifeq ($(CONFIG_FUNCTION_TRACER),y)
 ORIG_CFLAGS := $(KBUILD_CFLAGS)
 KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
 endif

arch/sh/cchips/Kconfig

@@ -22,20 +22,6 @@ config HD64461
 	  Say Y if you want support for the HD64461.
 	  Otherwise, say N.
 
-config HD64465
-	bool "Hitachi HD64465 companion chip support"
-	---help---
-	  The Hitachi HD64465 provides an interface for
-	  the SH7750 CPU, supporting a LCD controller,
-	  CRT color controller, IrDA, USB, PCMCIA,
-	  keyboard controller, and a printer interface.
-
-	  More information is available at
-	  <http://global.hitachi.com/New/cnews/E/1998/981019B.html>.
-
-	  Say Y if you want support for the HD64465.
-	  Otherwise, say N.
-
 endchoice
 
 # These will also be split into the Kconfig's below
@@ -61,23 +47,4 @@ config HD64461_ENABLER
 	  via the HD64461 companion chip.
 	  Otherwise, say N.
 
-config HD64465_IOBASE
-	hex "HD64465 start address"
-	depends on HD64465
-	default "0xb0000000"
-	help
-	  The default setting of the HD64465 IO base address is 0xb0000000.
-
-	  Do not change this unless you know what you are doing.
-
-config HD64465_IRQ
-	int "HD64465 IRQ"
-	depends on HD64465
-	default "5"
-	help
-	  The default setting of the HD64465 IRQ is 5.
-
-	  Do not change this unless you know what you are doing.
-
 endmenu
-

arch/sh/cchips/hd6446x/Makefile

 obj-$(CONFIG_HD64461)	+= hd64461.o
-obj-$(CONFIG_HD64465)	+= hd64465/
 
 EXTRA_CFLAGS += -Werror

arch/sh/cchips/hd6446x/hd64465/Makefile

-#
-# Makefile for the HD64465
-#
-
-obj-y	 := setup.o io.o gpio.o
-

arch/sh/cchips/hd6446x/hd64465/gpio.c

-/*
- * $Id: gpio.c,v 1.4 2003/05/19 22:24:18 lethal Exp $
- * by Greg Banks <gbanks@pocketpenguins.com>
- * (c) 2000 PocketPenguins Inc
- *
- * GPIO pin support for HD64465 companion chip.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <asm/io.h>
-#include <asm/hd64465/gpio.h>
-
-#define _PORTOF(portpin)    (((portpin)>>3)&0x7)
-#define _PINOF(portpin)     ((portpin)&0x7)
-
-/* Register addresses parametrised on port */
-#define GPIO_CR(port)	    (HD64465_REG_GPACR+((port)<<1))
-#define GPIO_DR(port)	    (HD64465_REG_GPADR+((port)<<1))
-#define GPIO_ICR(port)	    (HD64465_REG_GPAICR+((port)<<1))
-#define GPIO_ISR(port)	    (HD64465_REG_GPAISR+((port)<<1))
-
-#define GPIO_NPORTS 5
-
-#define MODNAME "hd64465_gpio"
-
-EXPORT_SYMBOL(hd64465_gpio_configure);
-EXPORT_SYMBOL(hd64465_gpio_get_pin);
-EXPORT_SYMBOL(hd64465_gpio_get_port);
-EXPORT_SYMBOL(hd64465_gpio_register_irq);
-EXPORT_SYMBOL(hd64465_gpio_set_pin);
-EXPORT_SYMBOL(hd64465_gpio_set_port);
-EXPORT_SYMBOL(hd64465_gpio_unregister_irq);
-
-/* TODO: each port should be protected with a spinlock */
-
-
-void hd64465_gpio_configure(int portpin, int direction)
-{
-    	unsigned short cr;
-	unsigned int shift = (_PINOF(portpin)<<1);
-
-	cr = inw(GPIO_CR(_PORTOF(portpin)));
-	cr &= ~(3<<shift);
-	cr |= direction<<shift;
-	outw(cr, GPIO_CR(_PORTOF(portpin)));
-}
-
-void hd64465_gpio_set_pin(int portpin, unsigned int value)
-{
-    	unsigned short d;
-	unsigned short mask = 1<<(_PINOF(portpin));
-	
-	d = inw(GPIO_DR(_PORTOF(portpin)));
-	if (value)
-	    d |= mask;
-	else
-	    d &= ~mask;
-	outw(d, GPIO_DR(_PORTOF(portpin)));
-}
-
-unsigned int hd64465_gpio_get_pin(int portpin)
-{
-	return inw(GPIO_DR(_PORTOF(portpin))) & (1<<(_PINOF(portpin)));
-}
-
-/* TODO: for cleaner atomicity semantics, add a mask to this routine */
-
-void hd64465_gpio_set_port(int port, unsigned int value)
-{
-	outw(value, GPIO_DR(port));
-}
-
-unsigned int hd64465_gpio_get_port(int port)
-{
-	return inw(GPIO_DR(port));
-}
-
-
-static struct {
-    void (*func)(int portpin, void *dev);
-    void *dev;
-} handlers[GPIO_NPORTS * 8];
-
-static irqreturn_t hd64465_gpio_interrupt(int irq, void *dev)
-{
-    	unsigned short port, pin, isr, mask, portpin;
-	
-	for (port=0 ; port<GPIO_NPORTS ; port++) {
-	    isr = inw(GPIO_ISR(port));
-	    
-	    for (pin=0 ; pin<8 ; pin++) {
-	    	mask = 1<<pin;
-	    	if (isr & mask) {
-		    portpin = (port<<3)|pin;
-		    if (handlers[portpin].func != 0)
-		    	handlers[portpin].func(portpin, handlers[portpin].dev);
-    	    	    else
-		    	printk(KERN_NOTICE "unexpected GPIO interrupt, pin %c%d\n",
-			    port+'A', (int)pin);
-		}
-	    }
-	    
-	    /* Write 1s back to ISR to clear it?  That's what the manual says.. */
-	    outw(isr, GPIO_ISR(port));
-	}
-
-	return IRQ_HANDLED;
-}
-
-void hd64465_gpio_register_irq(int portpin, int mode,
-	void (*handler)(int portpin, void *dev), void *dev)
-{
-    	unsigned long flags;
-	unsigned short icr, mask;
-
-	if (handler == 0)
-	    return;
-	    
-	local_irq_save(flags);
-	
-	handlers[portpin].func = handler;
-	handlers[portpin].dev = dev;
-
-    	/*
-	 * Configure Interrupt Control Register
-	 */
-	icr = inw(GPIO_ICR(_PORTOF(portpin)));
-	mask = (1<<_PINOF(portpin));
-	
-	/* unmask interrupt */
-	icr &= ~mask;
-	
-	/* set TS bit */
-	mask <<= 8;
-	icr &= ~mask;
-	if (mode == HD64465_GPIO_RISING)
-	    icr |= mask;
-	    
-	outw(icr, GPIO_ICR(_PORTOF(portpin)));
-
-	local_irq_restore(flags);
-}
-
-void hd64465_gpio_unregister_irq(int portpin)
-{
-    	unsigned long flags;
-	unsigned short icr;
-	
-	local_irq_save(flags);
-
-    	/*
-	 * Configure Interrupt Control Register
-	 */
-	icr = inw(GPIO_ICR(_PORTOF(portpin)));
-	icr |= (1<<_PINOF(portpin));	/* mask interrupt */
-	outw(icr, GPIO_ICR(_PORTOF(portpin)));
-
-	handlers[portpin].func = 0;
-	handlers[portpin].dev = 0;
-	
-	local_irq_restore(flags);
-}
-
-static int __init hd64465_gpio_init(void)
-{
-	if (!request_region(HD64465_REG_GPACR, 0x1000, MODNAME))
-		return -EBUSY;
-	if (request_irq(HD64465_IRQ_GPIO, hd64465_gpio_interrupt,
-	    		IRQF_DISABLED, MODNAME, 0))
-		goto out_irqfailed;
-
-    	printk("HD64465 GPIO layer on irq %d\n", HD64465_IRQ_GPIO);
-
-	return 0;
-
-out_irqfailed:
-	release_region(HD64465_REG_GPACR, 0x1000);
-
-	return -EINVAL;
-}
-
-static void __exit hd64465_gpio_exit(void)
-{
-    	release_region(HD64465_REG_GPACR, 0x1000);
-	free_irq(HD64465_IRQ_GPIO, 0);
-}
-
-module_init(hd64465_gpio_init);
-module_exit(hd64465_gpio_exit);
-
-MODULE_LICENSE("GPL");
-

arch/sh/cchips/hd6446x/hd64465/io.c

-/*
- * $Id: io.c,v 1.4 2003/08/03 03:05:10 lethal Exp $
- * by Greg Banks <gbanks@pocketpenguins.com>
- * (c) 2000 PocketPenguins Inc
- *
- * Derived from io_hd64461.c, which bore the message:
- * Copyright (C) 2000 YAEGASHI Takeshi
- *
- * Typical I/O routines for HD64465 system.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/io.h>
-#include <asm/hd64465/hd64465.h>
-
-
-#define HD64465_DEBUG 0
-
-#if HD64465_DEBUG
-#define DPRINTK(args...)	printk(args)
-#define DIPRINTK(n, args...)	if (hd64465_io_debug>(n)) printk(args)
-#else
-#define DPRINTK(args...)
-#define DIPRINTK(n, args...)
-#endif
-
-
-
-/* This is a hack suitable only for debugging IO port problems */
-int hd64465_io_debug;
-EXPORT_SYMBOL(hd64465_io_debug);
-
-/* Low iomap maps port 0-1K to addresses in 8byte chunks */
-#define HD64465_IOMAP_LO_THRESH 0x400
-#define HD64465_IOMAP_LO_SHIFT	3
-#define HD64465_IOMAP_LO_MASK	((1<<HD64465_IOMAP_LO_SHIFT)-1)
-#define HD64465_IOMAP_LO_NMAP	(HD64465_IOMAP_LO_THRESH>>HD64465_IOMAP_LO_SHIFT)
-static unsigned long	hd64465_iomap_lo[HD64465_IOMAP_LO_NMAP];
-static unsigned char	hd64465_iomap_lo_shift[HD64465_IOMAP_LO_NMAP];
-
-/* High iomap maps port 1K-64K to addresses in 1K chunks */
-#define HD64465_IOMAP_HI_THRESH 0x10000
-#define HD64465_IOMAP_HI_SHIFT	10
-#define HD64465_IOMAP_HI_MASK	((1<<HD64465_IOMAP_HI_SHIFT)-1)
-#define HD64465_IOMAP_HI_NMAP	(HD64465_IOMAP_HI_THRESH>>HD64465_IOMAP_HI_SHIFT)
-static unsigned long	hd64465_iomap_hi[HD64465_IOMAP_HI_NMAP];
-static unsigned char	hd64465_iomap_hi_shift[HD64465_IOMAP_HI_NMAP];
-
-#define PORT2ADDR(x) (sh_mv.mv_isa_port2addr(x))
-
-void hd64465_port_map(unsigned short baseport, unsigned int nports,
-		      unsigned long addr, unsigned char shift)
-{
-    	unsigned int port, endport = baseport + nports;
-
-    	DPRINTK("hd64465_port_map(base=0x%04hx, n=0x%04hx, addr=0x%08lx,endport=0x%04x)\n",
-	    baseport, nports, addr,endport);
-	    
-	for (port = baseport ;
-	     port < endport && port < HD64465_IOMAP_LO_THRESH ;
-	     port += (1<<HD64465_IOMAP_LO_SHIFT)) {
-	    DPRINTK("    maplo[0x%x] = 0x%08lx\n", port, addr);
-    	    hd64465_iomap_lo[port>>HD64465_IOMAP_LO_SHIFT] = addr;
-    	    hd64465_iomap_lo_shift[port>>HD64465_IOMAP_LO_SHIFT] = shift;
-	    addr += (1<<(HD64465_IOMAP_LO_SHIFT));
-	}
-
-	for (port = max_t(unsigned int, baseport, HD64465_IOMAP_LO_THRESH);
-	     port < endport && port < HD64465_IOMAP_HI_THRESH ;
-	     port += (1<<HD64465_IOMAP_HI_SHIFT)) {
-	    DPRINTK("    maphi[0x%x] = 0x%08lx\n", port, addr);
-    	    hd64465_iomap_hi[port>>HD64465_IOMAP_HI_SHIFT] = addr;
-    	    hd64465_iomap_hi_shift[port>>HD64465_IOMAP_HI_SHIFT] = shift;
-	    addr += (1<<(HD64465_IOMAP_HI_SHIFT));
-	}
-}
-EXPORT_SYMBOL(hd64465_port_map);
-
-void hd64465_port_unmap(unsigned short baseport, unsigned int nports)
-{
-    	unsigned int port, endport = baseport + nports;
-	
-    	DPRINTK("hd64465_port_unmap(base=0x%04hx, n=0x%04hx)\n",
-	    baseport, nports);
-
-	for (port = baseport ;
-	     port < endport && port < HD64465_IOMAP_LO_THRESH ;
-	     port += (1<<HD64465_IOMAP_LO_SHIFT)) {
-    	    hd64465_iomap_lo[port>>HD64465_IOMAP_LO_SHIFT] = 0;
-	}
-
-	for (port = max_t(unsigned int, baseport, HD64465_IOMAP_LO_THRESH);
-	     port < endport && port < HD64465_IOMAP_HI_THRESH ;
-	     port += (1<<HD64465_IOMAP_HI_SHIFT)) {
-    	    hd64465_iomap_hi[port>>HD64465_IOMAP_HI_SHIFT] = 0;
-	}
-}
-EXPORT_SYMBOL(hd64465_port_unmap);
-
-unsigned long hd64465_isa_port2addr(unsigned long port)
-{
-    	unsigned long addr = 0;
-	unsigned char shift;
-
-	/* handle remapping of low IO ports */
-	if (port < HD64465_IOMAP_LO_THRESH) {
-	    addr = hd64465_iomap_lo[port >> HD64465_IOMAP_LO_SHIFT];
-	    shift = hd64465_iomap_lo_shift[port >> HD64465_IOMAP_LO_SHIFT];
-	    if (addr != 0)
-	    	addr += (port & HD64465_IOMAP_LO_MASK) << shift;
-	    else
-		printk(KERN_NOTICE "io_hd64465: access to un-mapped port %lx\n", port);
-	} else if (port < HD64465_IOMAP_HI_THRESH) {
-	    addr = hd64465_iomap_hi[port >> HD64465_IOMAP_HI_SHIFT];
-	    shift = hd64465_iomap_hi_shift[port >> HD64465_IOMAP_HI_SHIFT];
-	    if (addr != 0)
-		addr += (port & HD64465_IOMAP_HI_MASK) << shift;
-	    else
-		printk(KERN_NOTICE "io_hd64465: access to un-mapped port %lx\n", port);
-	}
-	    	
-	/* HD64465 internal devices (0xb0000000) */
-	else if (port < 0x20000)
-	    addr = CONFIG_HD64465_IOBASE + port - 0x10000;
-
-	/* Whole physical address space (0xa0000000) */
-	else
-	    addr = P2SEGADDR(port);
-
-    	DIPRINTK(2, "PORT2ADDR(0x%08lx) = 0x%08lx\n", port, addr);
-
-	return addr;
-}
-
-static inline void delay(void)
-{
-	ctrl_inw(0xa0000000);
-}
-
-unsigned char hd64465_inb(unsigned long port)
-{
-	unsigned long addr = PORT2ADDR(port);
-	unsigned long b = (addr == 0 ? 0 : *(volatile unsigned char*)addr);
-
-	DIPRINTK(0, "inb(%08lx) = %02x\n", addr, (unsigned)b);
-	return b;
-}
-
-unsigned char hd64465_inb_p(unsigned long port)
-{
-    	unsigned long v;
-	unsigned long addr = PORT2ADDR(port);
-
-	v = (addr == 0 ? 0 : *(volatile unsigned char*)addr);
-	delay();
-	DIPRINTK(0, "inb_p(%08lx) = %02x\n", addr, (unsigned)v);
-	return v;
-}
-
-unsigned short hd64465_inw(unsigned long port)
-{
-    	unsigned long addr = PORT2ADDR(port);
-	unsigned long b = (addr == 0 ? 0 : *(volatile unsigned short*)addr);
-	DIPRINTK(0, "inw(%08lx) = %04lx\n", addr, b);
-	return b;
-}
-
-unsigned int hd64465_inl(unsigned long port)
-{
-    	unsigned long addr = PORT2ADDR(port);
-	unsigned int b = (addr == 0 ? 0 : *(volatile unsigned long*)addr);
-	DIPRINTK(0, "inl(%08lx) = %08x\n", addr, b);
-	return b;
-}
-
-void hd64465_outb(unsigned char b, unsigned long port)
-{
-	unsigned long addr = PORT2ADDR(port);
-
-	DIPRINTK(0, "outb(%02x, %08lx)\n", (unsigned)b, addr);
-	if (addr != 0)
-	    *(volatile unsigned char*)addr = b;
-}
-
-void hd64465_outb_p(unsigned char b, unsigned long port)
-{
-	unsigned long addr = PORT2ADDR(port);
-
-	DIPRINTK(0, "outb_p(%02x, %08lx)\n", (unsigned)b, addr);
-    	if (addr != 0)
-	    *(volatile unsigned char*)addr = b;
-	delay();
-}
-
-void hd64465_outw(unsigned short b, unsigned long port)
-{
-	unsigned long addr = PORT2ADDR(port);
-	DIPRINTK(0, "outw(%04x, %08lx)\n", (unsigned)b, addr);
-	if (addr != 0)
-	    *(volatile unsigned short*)addr = b;
-}
-
-void hd64465_outl(unsigned int b, unsigned long port)
-{
-	unsigned long addr = PORT2ADDR(port);
-	DIPRINTK(0, "outl(%08x, %08lx)\n", b, addr);
-	if (addr != 0)
-            *(volatile unsigned long*)addr = b;
-}
-

arch/sh/cchips/hd6446x/hd64465/setup.c

-/*
- * $Id: setup.c,v 1.4 2003/08/03 03:05:10 lethal Exp $
- *
- * Setup and IRQ handling code for the HD64465 companion chip.
- * by Greg Banks <gbanks@pocketpenguins.com>
- * Copyright (c) 2000 PocketPenguins Inc
- *
- * Derived from setup_hd64461.c which bore the message:
- * Copyright (C) 2000 YAEGASHI Takeshi
- */
-
-#include <linux/sched.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/hd64465/hd64465.h>
-
-static void disable_hd64465_irq(unsigned int irq)
-{
-	unsigned short nimr;
-	unsigned short mask = 1 << (irq - HD64465_IRQ_BASE);
-
-	pr_debug("disable_hd64465_irq(%d): mask=%x\n", irq, mask);
-	nimr = inw(HD64465_REG_NIMR);
-	nimr |= mask;
-	outw(nimr, HD64465_REG_NIMR);
-}
-
-static void enable_hd64465_irq(unsigned int irq)
-{
-	unsigned short nimr;
-	unsigned short mask = 1 << (irq - HD64465_IRQ_BASE);
-
-	pr_debug("enable_hd64465_irq(%d): mask=%x\n", irq, mask);
-	nimr = inw(HD64465_REG_NIMR);
-	nimr &= ~mask;
-	outw(nimr, HD64465_REG_NIMR);
-}
-
-static void mask_and_ack_hd64465(unsigned int irq)
-{
-	disable_hd64465_irq(irq);
-}
-
-static void end_hd64465_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_hd64465_irq(irq);
-}
-
-static unsigned int startup_hd64465_irq(unsigned int irq)
-{
-	enable_hd64465_irq(irq);
-	return 0;
-}
-
-static void shutdown_hd64465_irq(unsigned int irq)
-{
-	disable_hd64465_irq(irq);
-}
-
-static struct hw_interrupt_type hd64465_irq_type = {
-	.typename	= "HD64465-IRQ",
-	.startup	= startup_hd64465_irq,
-	.shutdown	= shutdown_hd64465_irq,
-	.enable		= enable_hd64465_irq,
-	.disable	= disable_hd64465_irq,
-	.ack		= mask_and_ack_hd64465,
-	.end		= end_hd64465_irq,
-};
-
-static irqreturn_t hd64465_interrupt(int irq, void *dev_id)
-{
-	printk(KERN_INFO
-	       "HD64465: spurious interrupt, nirr: 0x%x nimr: 0x%x\n",
-	       inw(HD64465_REG_NIRR), inw(HD64465_REG_NIMR));
-
-	return IRQ_NONE;
-}
-
-/*
- * Support for a secondary IRQ demux step.  This is necessary
- * because the HD64465 presents a very thin interface to the
- * PCMCIA bus; a lot of features (such as remapping interrupts)
- * normally done in hardware by other PCMCIA host bridges is
- * instead done in software.
- */
-static struct {
-    int (*func)(int, void *);
-    void *dev;
-} hd64465_demux[HD64465_IRQ_NUM];
-
-void hd64465_register_irq_demux(int irq,
-		int (*demux)(int irq, void *dev), void *dev)
-{
-	hd64465_demux[irq - HD64465_IRQ_BASE].func = demux;
-	hd64465_demux[irq - HD64465_IRQ_BASE].dev = dev;
-}
-EXPORT_SYMBOL(hd64465_register_irq_demux);
-
-void hd64465_unregister_irq_demux(int irq)
-{
-	hd64465_demux[irq - HD64465_IRQ_BASE].func = 0;
-}
-EXPORT_SYMBOL(hd64465_unregister_irq_demux);
-
-int hd64465_irq_demux(int irq)
-{
-	if (irq == CONFIG_HD64465_IRQ) {
-		unsigned short i, bit;
-		unsigned short nirr = inw(HD64465_REG_NIRR);
-		unsigned short nimr = inw(HD64465_REG_NIMR);
-
-		pr_debug("hd64465_irq_demux, nirr=%04x, nimr=%04x\n", nirr, nimr);
-		nirr &= ~nimr;
-		for (bit = 1, i = 0 ; i < HD64465_IRQ_NUM ; bit <<= 1, i++)
-		    if (nirr & bit)
-			break;
-
-		if (i < HD64465_IRQ_NUM) {
-		    irq = HD64465_IRQ_BASE + i;
-		    if (hd64465_demux[i].func != 0)
-			irq = hd64465_demux[i].func(irq, hd64465_demux[i].dev);
-		}
-	}
-	return irq;
-}
-
-static struct irqaction irq0  = {
-	.handler = hd64465_interrupt,
-	.flags = IRQF_DISABLED,
-	.mask = CPU_MASK_NONE,
-	.name = "HD64465",
-};
-
-static int __init setup_hd64465(void)
-{
-	int i;
-	unsigned short rev;
-	unsigned short smscr;
-
-	if (!MACH_HD64465)
-		return 0;
-
-	printk(KERN_INFO "HD64465 configured at 0x%x on irq %d(mapped into %d to %d)\n",
-	       CONFIG_HD64465_IOBASE,
-	       CONFIG_HD64465_IRQ,
-	       HD64465_IRQ_BASE,
-	       HD64465_IRQ_BASE+HD64465_IRQ_NUM-1);
-
-	if (inw(HD64465_REG_SDID) != HD64465_SDID) {
-		printk(KERN_ERR "HD64465 device ID not found, check base address\n");
-	}
-
-	rev = inw(HD64465_REG_SRR);
-	printk(KERN_INFO "HD64465 hardware revision %d.%d\n", (rev >> 8) & 0xff, rev & 0xff);
-
-	outw(0xffff, HD64465_REG_NIMR);	/* mask all interrupts */
-
-	for (i = 0; i < HD64465_IRQ_NUM ; i++) {
-		irq_desc[HD64465_IRQ_BASE + i].chip = &hd64465_irq_type;
-	}
-
-	setup_irq(CONFIG_HD64465_IRQ, &irq0);
-
-	/* wake up the UART from STANDBY at this point */
-	smscr = inw(HD64465_REG_SMSCR);
-	outw(smscr & (~HD64465_SMSCR_UARTST), HD64465_REG_SMSCR);
-
-	/* remap IO ports for first ISA serial port to HD64465 UART */
-	hd64465_port_map(0x3f8, 8, CONFIG_HD64465_IOBASE + 0x8000, 1);
-
-	return 0;
-}
-module_init(setup_hd64465);

arch/sh/configs/migor_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Tue Oct 21 12:57:28 2008
+# Linux kernel version: 2.6.28-rc2
+# Fri Oct 31 15:58:06 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -73,7 +73,6 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -285,7 +284,7 @@ CONFIG_GUSA=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on"
+CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
 
 #
 # Bus options
@@ -718,6 +717,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 
@@ -969,7 +969,23 @@ CONFIG_TMPFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
 
 #
 # Partition Types
@@ -1019,7 +1035,12 @@ CONFIG_CRYPTO=y
 # Crypto core or helper
 #
 # CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1096,7 +1117,7 @@ CONFIG_CRYPTO=y
 # Random Number Generation
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines

arch/sh/include/asm/byteorder.h

@@ -8,7 +8,15 @@
 #include <linux/compiler.h>
 #include <linux/types.h>
 
-static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
+#ifdef __LITTLE_ENDIAN__
+# define __LITTLE_ENDIAN
+#else
+# define __BIG_ENDIAN
+#endif
+
+#define __SWAB_64_THRU_32__
+
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 {
 	__asm__(
 #ifdef __SH5__
@@ -24,8 +32,9 @@ static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
 
 	return x;
 }
+#define __arch_swab32 __arch_swab32
 
-static inline __attribute_const__ __u16 ___arch__swab16(__u16 x)
+static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
 {
 	__asm__(
 #ifdef __SH5__
@@ -39,32 +48,21 @@ static inline __attribute_const__ __u16 ___arch__swab16(__u16 x)
 
 	return x;
 }
+#define __arch_swab16 __arch_swab16
 
-static inline __u64 ___arch__swab64(__u64 val)
+static inline __u64 __arch_swab64(__u64 val)
 {
 	union {
 		struct { __u32 a,b; } s;
 		__u64 u;
 	} v, w;
 	v.u = val;
-	w.s.b = ___arch__swab32(v.s.a);
-	w.s.a = ___arch__swab32(v.s.b);
+	w.s.b = __arch_swab32(v.s.a);
+	w.s.a = __arch_swab32(v.s.b);
 	return w.u;
 }
+#define __arch_swab64 __arch_swab64
 
-#define __arch__swab64(x) ___arch__swab64(x)
-#define __arch__swab32(x) ___arch__swab32(x)
-#define __arch__swab16(x) ___arch__swab16(x)
-
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#  define __BYTEORDER_HAS_U64__
-#  define __SWAB_64_THRU_32__
-#endif
-
-#ifdef __LITTLE_ENDIAN__
-#include <linux/byteorder/little_endian.h>
-#else
-#include <linux/byteorder/big_endian.h>
-#endif
+#include <linux/byteorder.h>
 
 #endif /* __ASM_SH_BYTEORDER_H */

arch/sh/include/asm/hd64465/gpio.h

-#ifndef _ASM_SH_HD64465_GPIO_
-#define _ASM_SH_HD64465_GPIO_ 1
-/*
- * $Id: gpio.h,v 1.3 2003/05/04 19:30:14 lethal Exp $
- *
- * Hitachi HD64465 companion chip: General Purpose IO pins support.
- * This layer enables other device drivers to configure GPIO
- * pins, get and set their values, and register an interrupt
- * routine for when input pins change in hardware.
- *
- * by Greg Banks <gbanks@pocketpenguins.com>
- * (c) 2000 PocketPenguins Inc.
- */
-#include <asm/hd64465.h>
-
-/* Macro to construct a portpin number (used in all
- * subsequent functions) from a port letter and a pin
- * number, e.g. HD64465_GPIO_PORTPIN('A', 5).
- */
-#define HD64465_GPIO_PORTPIN(port,pin)	(((port)-'A')<<3|(pin))
-
-/* Pin configuration constants for _configure() */
-#define HD64465_GPIO_FUNCTION2	0	/* use the pin's *other* function */
-#define HD64465_GPIO_OUT	1	/* output */
-#define HD64465_GPIO_IN_PULLUP	2	/* input, pull-up MOS on */
-#define HD64465_GPIO_IN		3	/* input */
-
-/* Configure a pin's direction */
-extern void hd64465_gpio_configure(int portpin, int direction);
-
-/* Get, set value */
-extern void hd64465_gpio_set_pin(int portpin, unsigned int value);
-extern unsigned int hd64465_gpio_get_pin(int portpin);
-extern void hd64465_gpio_set_port(int port, unsigned int value);
-extern unsigned int hd64465_gpio_get_port(int port);
-
-/* mode constants for _register_irq() */
-#define HD64465_GPIO_FALLING	0
-#define HD64465_GPIO_RISING	1
-
-/* Interrupt on external value change */
-extern void hd64465_gpio_register_irq(int portpin, int mode,
-	void (*handler)(int portpin, void *dev), void *dev);
-extern void hd64465_gpio_unregister_irq(int portpin);
-
-#endif /* _ASM_SH_HD64465_GPIO_  */

arch/sh/include/asm/hd64465/hd64465.h

-#ifndef _ASM_SH_HD64465_
-#define _ASM_SH_HD64465_ 1
-/*
- * $Id: hd64465.h,v 1.3 2003/05/04 19:30:15 lethal Exp $
- *
- * Hitachi HD64465 companion chip support
- *
- * by Greg Banks <gbanks@pocketpenguins.com>
- * (c) 2000 PocketPenguins Inc.
- *
- * Derived from <asm/hd64461.h> which bore the message:
- * Copyright (C) 2000 YAEGASHI Takeshi
- */
-#include <asm/io.h>
-#include <asm/irq.h>
-
-/*
- * Note that registers are defined here as virtual port numbers,
- * which have no meaning except to get translated by hd64465_isa_port2addr()
- * to an address in the range 0xb0000000-0xb3ffffff.  Note that
- * this translation happens to consist of adding the lower 16 bits
- * of the virtual port number to 0xb0000000.  Note also that the manual
- * shows addresses as absolute physical addresses starting at 0x10000000,
- * so e.g. the NIRR register is listed as 0x15000 here, 0x10005000 in the
- * manual, and accessed using address 0xb0005000 - Greg.
- */
-
-/* System registers */
-#define HD64465_REG_SRR     0x1000c 	/* System Revision Register */
-#define HD64465_REG_SDID    0x10010 	/* System Device ID Reg */
-#define     HD64465_SDID            0x8122  /* 64465 device ID */
-
-/* Power Management registers */
-#define HD64465_REG_SMSCR   0x10000 	/* System Module Standby Control Reg */
-#define	    HD64465_SMSCR_PS2ST     0x4000  /* PS/2 Standby */
-#define	    HD64465_SMSCR_ADCST     0x1000  /* ADC Standby */
-#define	    HD64465_SMSCR_UARTST    0x0800  /* UART Standby */
-#define	    HD64465_SMSCR_SCDIST    0x0200  /* Serial Codec Standby */
-#define	    HD64465_SMSCR_PPST	    0x0100  /* Parallel Port Standby */
-#define	    HD64465_SMSCR_PC0ST     0x0040  /* PCMCIA0 Standby */
-#define	    HD64465_SMSCR_PC1ST     0x0020  /* PCMCIA1 Standby */
-#define	    HD64465_SMSCR_AFEST     0x0010  /* AFE Standby */
-#define	    HD64465_SMSCR_TM0ST     0x0008  /* Timer0 Standby */
-#define	    HD64465_SMSCR_TM1ST     0x0004  /* Timer1 Standby */
-#define	    HD64465_SMSCR_IRDAST    0x0002  /* IRDA Standby */
-#define	    HD64465_SMSCR_KBCST     0x0001  /* Keyboard Controller Standby */
- 
-/* Interrupt Controller registers */
-#define HD64465_REG_NIRR    0x15000  	/* Interrupt Request Register */
-#define HD64465_REG_NIMR    0x15002  	/* Interrupt Mask Register */
-#define HD64465_REG_NITR    0x15004  	/* Interrupt Trigger Mode Register */
-
-/* Timer registers */
-#define HD64465_REG_TCVR1   0x16000  	/* Timer 1 constant value register  */
-#define HD64465_REG_TCVR0   0x16002	/* Timer 0 constant value register  */
-#define HD64465_REG_TRVR1   0x16004	/* Timer 1 read value register  */
-#define HD64465_REG_TRVR0   0x16006	/* Timer 0 read value register  */
-#define HD64465_REG_TCR1    0x16008	/* Timer 1 control register  */
-#define HD64465_REG_TCR0    0x1600A	/* Timer 0 control register  */
-#define	    HD64465_TCR_EADT 	0x10	    /* Enable ADTRIG# signal */
-#define	    HD64465_TCR_ETMO 	0x08	    /* Enable TMO signal */
-#define	    HD64465_TCR_PST_MASK 0x06	    /* Clock Prescale */
-#define	    HD64465_TCR_PST_1 	0x06	    /* 1:1 */
-#define	    HD64465_TCR_PST_4 	0x04	    /* 1:4 */
-#define	    HD64465_TCR_PST_8 	0x02	    /* 1:8 */
-#define	    HD64465_TCR_PST_16 	0x00	    /* 1:16 */
-#define	    HD64465_TCR_TSTP 	0x01	    /* Start/Stop timer */
-#define HD64465_REG_TIRR    0x1600C	/* Timer interrupt request register  */
-#define HD64465_REG_TIDR    0x1600E	/* Timer interrupt disable register  */
-#define HD64465_REG_PWM1CS  0x16010	/* PWM 1 clock scale register  */
-#define HD64465_REG_PWM1LPC 0x16012	/* PWM 1 low pulse width counter register  */
-#define HD64465_REG_PWM1HPC 0x16014	/* PWM 1 high pulse width counter register  */
-#define HD64465_REG_PWM0CS  0x16018	/* PWM 0 clock scale register  */
-#define HD64465_REG_PWM0LPC 0x1601A	/* PWM 0 low pulse width counter register  */
-#define HD64465_REG_PWM0HPC 0x1601C	/* PWM 0 high pulse width counter register  */
-
-/* Analog/Digital Converter registers */
-#define HD64465_REG_ADDRA   0x1E000	/* A/D data register A */
-#define HD64465_REG_ADDRB   0x1E002	/* A/D data register B */
-#define HD64465_REG_ADDRC   0x1E004	/* A/D data register C */
-#define HD64465_REG_ADDRD   0x1E006	/* A/D data register D */
-#define HD64465_REG_ADCSR   0x1E008	/* A/D control/status register */
-#define     HD64465_ADCSR_ADF	    0x80    /* A/D End Flag */
-#define     HD64465_ADCSR_ADST	    0x40    /* A/D Start Flag */
-#define     HD64465_ADCSR_ADIS	    0x20    /* A/D Interrupt Status */
-#define     HD64465_ADCSR_TRGE	    0x10    /* A/D Trigger Enable */
-#define     HD64465_ADCSR_ADIE	    0x08    /* A/D Interrupt Enable */
-#define     HD64465_ADCSR_SCAN	    0x04    /* A/D Scan Mode */
-#define     HD64465_ADCSR_CH_MASK   0x03    /* A/D Channel */
-#define HD64465_REG_ADCALCR 0x1E00A  	/* A/D calibration sample control */
-#define HD64465_REG_ADCAL   0x1E00C  	/* A/D calibration data register */
-
-
-/* General Purpose I/O ports registers */
-#define HD64465_REG_GPACR   0x14000  	/* Port A Control Register */
-#define HD64465_REG_GPBCR   0x14002  	/* Port B Control Register */
-#define HD64465_REG_GPCCR   0x14004  	/* Port C Control Register */
-#define HD64465_REG_GPDCR   0x14006  	/* Port D Control Register */
-#define HD64465_REG_GPECR   0x14008  	/* Port E Control Register */
-#define HD64465_REG_GPADR   0x14010  	/* Port A Data Register */
-#define HD64465_REG_GPBDR   0x14012  	/* Port B Data Register */
-#define HD64465_REG_GPCDR   0x14014  	/* Port C Data Register */
-#define HD64465_REG_GPDDR   0x14016  	/* Port D Data Register */
-#define HD64465_REG_GPEDR   0x14018  	/* Port E Data Register */
-#define HD64465_REG_GPAICR  0x14020  	/* Port A Interrupt Control Register */
-#define HD64465_REG_GPBICR  0x14022  	/* Port B Interrupt Control Register */
-#define HD64465_REG_GPCICR  0x14024  	/* Port C Interrupt Control Register */
-#define HD64465_REG_GPDICR  0x14026  	/* Port D Interrupt Control Register */
-#define HD64465_REG_GPEICR  0x14028  	/* Port E Interrupt Control Register */
-#define HD64465_REG_GPAISR  0x14040  	/* Port A Interrupt Status Register */
-#define HD64465_REG_GPBISR  0x14042  	/* Port B Interrupt Status Register */
-#define HD64465_REG_GPCISR  0x14044  	/* Port C Interrupt Status Register */
-#define HD64465_REG_GPDISR  0x14046  	/* Port D Interrupt Status Register */
-#define HD64465_REG_GPEISR  0x14048  	/* Port E Interrupt Status Register */
-
-/* PCMCIA bridge interface */
-#define HD64465_REG_PCC0ISR	0x12000	/* socket 0 interface status */ 
-#define     HD64465_PCCISR_PREADY   	 0x80    /* mem card ready / io card IREQ */
-#define     HD64465_PCCISR_PIREQ    	 0x80
-#define     HD64465_PCCISR_PMWP     	 0x40    /* mem card write-protected */
-#define     HD64465_PCCISR_PVS2 	 0x20    /* voltage select pin 2 */
-#define     HD64465_PCCISR_PVS1 	 0x10    /* voltage select pin 1 */
-#define     HD64465_PCCISR_PCD_MASK 	 0x0c    /* card detect */
-#define     HD64465_PCCISR_PBVD_MASK     0x03    /* battery voltage */
-#define     HD64465_PCCISR_PBVD_BATGOOD  0x03    /* battery good */
-#define     HD64465_PCCISR_PBVD_BATWARN  0x01    /* battery low warning */
-#define     HD64465_PCCISR_PBVD_BATDEAD1 0x02    /* battery dead */
-#define     HD64465_PCCISR_PBVD_BATDEAD2 0x00    /* battery dead */
-#define HD64465_REG_PCC0GCR	0x12002	/* socket 0 general control */ 
-#define     HD64465_PCCGCR_PDRV   	 0x80    /* output drive */
-#define     HD64465_PCCGCR_PCCR   	 0x40    /* PC card reset */
-#define     HD64465_PCCGCR_PCCT   	 0x20    /* PC card type, 1=IO&mem, 0=mem */
-#define     HD64465_PCCGCR_PVCC0   	 0x10    /* voltage control pin VCC0SEL0 */
-#define     HD64465_PCCGCR_PMMOD   	 0x08    /* memory mode */
-#define     HD64465_PCCGCR_PPA25   	 0x04    /* pin A25 */
-#define     HD64465_PCCGCR_PPA24   	 0x02    /* pin A24 */
-#define     HD64465_PCCGCR_PREG   	 0x01    /* ping PCC0REG# */
-#define HD64465_REG_PCC0CSCR	0x12004	/* socket 0 card status change */ 
-#define     HD64465_PCCCSCR_PSCDI   	 0x80    /* sw card detect intr */
-#define     HD64465_PCCCSCR_PSWSEL   	 0x40    /* power select */
-#define     HD64465_PCCCSCR_PIREQ   	 0x20    /* IREQ intr req */
-#define     HD64465_PCCCSCR_PSC   	 0x10    /* STSCHG (status change) pin */
-#define     HD64465_PCCCSCR_PCDC   	 0x08    /* CD (card detect) change */
-#define     HD64465_PCCCSCR_PRC   	 0x04    /* ready change */
-#define     HD64465_PCCCSCR_PBW   	 0x02    /* battery warning change */
-#define     HD64465_PCCCSCR_PBD   	 0x01    /* battery dead change */
-#define HD64465_REG_PCC0CSCIER	0x12006	/* socket 0 card status change interrupt enable */ 
-#define     HD64465_PCCCSCIER_PCRE   	 0x80    /* change reset enable */
-#define     HD64465_PCCCSCIER_PIREQE_MASK   	0x60   /* IREQ enable */
-#define     HD64465_PCCCSCIER_PIREQE_DISABLED	0x00   /* IREQ disabled */
-#define     HD64465_PCCCSCIER_PIREQE_LEVEL  	0x20   /* IREQ level-triggered */
-#define     HD64465_PCCCSCIER_PIREQE_FALLING	0x40   /* IREQ falling-edge-trig */
-#define     HD64465_PCCCSCIER_PIREQE_RISING 	0x60   /* IREQ rising-edge-trig */
-#define     HD64465_PCCCSCIER_PSCE   	 0x10    /* status change enable */
-#define     HD64465_PCCCSCIER_PCDE   	 0x08    /* card detect change enable */
-#define     HD64465_PCCCSCIER_PRE   	 0x04    /* ready change enable */
-#define     HD64465_PCCCSCIER_PBWE   	 0x02    /* battery warn change enable */
-#define     HD64465_PCCCSCIER_PBDE   	 0x01    /* battery dead change enable*/
-#define HD64465_REG_PCC0SCR	0x12008	/* socket 0 software control */ 
-#define     HD64465_PCCSCR_SHDN   	 0x10    /* TPS2206 SHutDowN pin */
-#define     HD64465_PCCSCR_SWP   	 0x01    /* write protect */
-#define HD64465_REG_PCCPSR	0x1200A	/* serial power switch control */ 
-#define HD64465_REG_PCC1ISR	0x12010	/* socket 1 interface status */ 
-#define HD64465_REG_PCC1GCR	0x12012	/* socket 1 general control */ 
-#define HD64465_REG_PCC1CSCR	0x12014	/* socket 1 card status change */ 
-#define HD64465_REG_PCC1CSCIER	0x12016	/* socket 1 card status change interrupt enable */ 
-#define HD64465_REG_PCC1SCR	0x12018	/* socket 1 software control */ 
-
-
-/* PS/2 Keyboard and mouse controller -- *not* register compatible */
-#define HD64465_REG_KBCSR   	0x1dc00 /* Keyboard Control/Status reg */
-#define     HD64465_KBCSR_KBCIE   	 0x8000    /* KBCK Input Enable */
-#define     HD64465_KBCSR_KBCOE   	 0x4000    /* KBCK Output Enable */
-#define     HD64465_KBCSR_KBDOE   	 0x2000    /* KB DATA Output Enable */
-#define     HD64465_KBCSR_KBCD   	 0x1000    /* KBCK Driven */
-#define     HD64465_KBCSR_KBDD   	 0x0800    /* KB DATA Driven */
-#define     HD64465_KBCSR_KBCS   	 0x0400    /* KBCK pin Status */
-#define     HD64465_KBCSR_KBDS   	 0x0200    /* KB DATA pin Status */
-#define     HD64465_KBCSR_KBDP   	 0x0100    /* KB DATA Parity bit */
-#define     HD64465_KBCSR_KBD_MASK   	 0x00ff    /* KD DATA shift reg */
-#define HD64465_REG_KBISR   	0x1dc04 /* Keyboard Interrupt Status reg */
-#define     HD64465_KBISR_KBRDF   	 0x0001    /* KB Received Data Full */
-#define HD64465_REG_MSCSR   	0x1dc10 /* Mouse Control/Status reg */
-#define HD64465_REG_MSISR   	0x1dc14 /* Mouse Interrupt Status reg */
-
-
-/*
- * Logical address at which the HD64465 is mapped.  Note that this
- * should always be in the P2 segment (uncached and untranslated).
- */
-#ifndef CONFIG_HD64465_IOBASE
-#define CONFIG_HD64465_IOBASE	0xb0000000
-#endif
-/*
- * The HD64465 multiplexes all its modules' interrupts onto
- * this single interrupt.
- */
-#ifndef CONFIG_HD64465_IRQ
-#define CONFIG_HD64465_IRQ	5
-#endif
-
-
-#define _HD64465_IO_MASK	0xf8000000
-#define is_hd64465_addr(addr) \
-	((addr & _HD64465_IO_MASK) == (CONFIG_HD64465_IOBASE & _HD64465_IO_MASK))
-
-/*
- * A range of 16 virtual interrupts generated by
- * demuxing the HD64465 muxed interrupt.
- */
-#define HD64465_IRQ_BASE	OFFCHIP_IRQ_BASE
-#define HD64465_IRQ_NUM 	16
-#define HD64465_IRQ_ADC     	(HD64465_IRQ_BASE+0)
-#define HD64465_IRQ_USB     	(HD64465_IRQ_BASE+1)
-#define HD64465_IRQ_SCDI    	(HD64465_IRQ_BASE+2)
-#define HD64465_IRQ_PARALLEL	(HD64465_IRQ_BASE+3)
-/* bit 4 is reserved */
-#define HD64465_IRQ_UART    	(HD64465_IRQ_BASE+5)
-#define HD64465_IRQ_IRDA    	(HD64465_IRQ_BASE+6)
-#define HD64465_IRQ_PS2MOUSE	(HD64465_IRQ_BASE+7)
-#define HD64465_IRQ_KBC     	(HD64465_IRQ_BASE+8)
-#define HD64465_IRQ_TIMER1   	(HD64465_IRQ_BASE+9)
-#define HD64465_IRQ_TIMER0  	(HD64465_IRQ_BASE+10)
-#define HD64465_IRQ_GPIO    	(HD64465_IRQ_BASE+11)
-#define HD64465_IRQ_AFE     	(HD64465_IRQ_BASE+12)
-#define HD64465_IRQ_PCMCIA1 	(HD64465_IRQ_BASE+13)
-#define HD64465_IRQ_PCMCIA0 	(HD64465_IRQ_BASE+14)
-#define HD64465_IRQ_PS2KBD     	(HD64465_IRQ_BASE+15)
-
-/* Constants for PCMCIA mappings */
-#define HD64465_PCC_WINDOW	0x01000000
-
-#define HD64465_PCC0_BASE	0xb8000000	/* area 6 */
-#define HD64465_PCC0_ATTR	(HD64465_PCC0_BASE)
-#define HD64465_PCC0_COMM	(HD64465_PCC0_BASE+HD64465_PCC_WINDOW)
-#define HD64465_PCC0_IO		(HD64465_PCC0_BASE+2*HD64465_PCC_WINDOW)
-
-#define HD64465_PCC1_BASE	0xb4000000	/* area 5 */
-#define HD64465_PCC1_ATTR	(HD64465_PCC1_BASE)
-#define HD64465_PCC1_COMM	(HD64465_PCC1_BASE+HD64465_PCC_WINDOW)
-#define HD64465_PCC1_IO		(HD64465_PCC1_BASE+2*HD64465_PCC_WINDOW)
-
-/*
- * Base of USB controller interface (as memory)
- */
-#define HD64465_USB_BASE    	(CONFIG_HD64465_IOBASE+0xb000)
-#define HD64465_USB_LEN    	0x1000
-/*
- * Base of embedded SRAM, used for USB controller.
- */
-#define HD64465_SRAM_BASE    	(CONFIG_HD64465_IOBASE+0x9000)
-#define HD64465_SRAM_LEN    	0x1000
-
-
-
-#endif /* _ASM_SH_HD64465_  */

arch/sh/include/asm/hd64465/io.h

-/*
- * include/asm-sh/hd64465/io.h
- *
- * By Greg Banks <gbanks@pocketpenguins.com>
- * (c) 2000 PocketPenguins Inc.
- *
- * Derived from io_hd64461.h, which bore the message:
- * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * IO functions for an HD64465 "Windows CE Intelligent Peripheral Controller".
- */
-
-#ifndef _ASM_SH_IO_HD64465_H
-#define _ASM_SH_IO_HD64465_H
-
-extern unsigned char hd64465_inb(unsigned long port);
-extern unsigned short hd64465_inw(unsigned long port);
-extern unsigned int hd64465_inl(unsigned long port);
-
-extern void hd64465_outb(unsigned char value, unsigned long port);
-extern void hd64465_outw(unsigned short value, unsigned long port);
-extern void hd64465_outl(unsigned int value, unsigned long port);
-
-extern unsigned char hd64465_inb_p(unsigned long port);
-extern void hd64465_outb_p(unsigned char value, unsigned long port);
-
-extern unsigned long hd64465_isa_port2addr(unsigned long offset);
-extern int hd64465_irq_demux(int irq);
-/* Provision for generic secondary demux step -- used by PCMCIA code */
-extern void hd64465_register_irq_demux(int irq,
-		int (*demux)(int irq, void *dev), void *dev);
-extern void hd64465_unregister_irq_demux(int irq);
-/* Set this variable to 1 to see port traffic */
-extern int hd64465_io_debug;
-/* Map a range of ports to a range of kernel virtual memory.
- */
-extern void hd64465_port_map(unsigned short baseport, unsigned int nports,
-			     unsigned long addr, unsigned char shift);
-extern void hd64465_port_unmap(unsigned short baseport, unsigned int nports);
-
-#endif /* _ASM_SH_IO_HD64465_H */

arch/sh/include/asm/serial.h

@@ -7,8 +7,6 @@
 #ifndef _ASM_SERIAL_H
 #define _ASM_SERIAL_H
 
-#include <linux/kernel.h>
-
 /*
  * This assumes you have a 1.8432 MHz clock for your UART.
  *
@@ -18,19 +16,4 @@
  */
 #define BASE_BAUD ( 1843200 / 16 )
 
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-
-#ifdef CONFIG_HD64465
-#include <asm/hd64465/hd64465.h>
-
-#define SERIAL_PORT_DFNS                   \
-        /* UART CLK   PORT IRQ     FLAGS        */                      \
-        { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS }  /* ttyS0 */
-
-#else
-
-#define SERIAL_PORT_DFNS
-
-#endif
-
 #endif /* _ASM_SERIAL_H */

arch/sh/include/cpu-sh4/cpu/rtc.h

 #ifndef __ASM_SH_CPU_SH4_RTC_H
 #define __ASM_SH_CPU_SH4_RTC_H
 
-#ifdef CONFIG_CPU_SUBTYPE_SH7723
+#if defined(CONFIG_CPU_SUBTYPE_SH7722) || defined(CONFIG_CPU_SUBTYPE_SH7723)
 #define rtc_reg_size		sizeof(u16)
 #else
 #define rtc_reg_size		sizeof(u32)

arch/sh/kernel/cpu/sh4a/setup-sh7366.c

@@ -36,6 +36,32 @@ static struct platform_device iic_device = {
 	.resource       = iic_resources,
 };
 
+static struct resource usb_host_resources[] = {
+	[0] = {
+		.name   = "r8a66597_hcd",
+		.start  = 0xa4d80000,
+		.end    = 0xa4d800ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.name   = "r8a66597_hcd",
+		.start  = 65,
+		.end    = 65,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usb_host_device = {
+	.name	= "r8a66597_hcd",
+	.id	= -1,
+	.dev = {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(usb_host_resources),
+	.resource	= usb_host_resources,
+};
+
 static struct uio_info vpu_platform_data = {
 	.name = "VPU5",
 	.version = "0",
@@ -142,6 +168,7 @@ static struct platform_device sci_device = {
 static struct platform_device *sh7366_devices[] __initdata = {
 	&iic_device,
 	&sci_device,
+	&usb_host_device,
 	&vpu_device,
 	&veu0_device,
 	&veu1_device,
@@ -158,6 +185,7 @@ static int __init sh7366_devices_setup(void)
 	clk_always_enable("mstp022"); /* INTC */
 	clk_always_enable("mstp020"); /* SuperHyway */
 	clk_always_enable("mstp109"); /* I2C */
+	clk_always_enable("mstp211"); /* USB */
 	clk_always_enable("mstp207"); /* VEU-2 */
 	clk_always_enable("mstp202"); /* VEU-1 */
 	clk_always_enable("mstp201"); /* VPU */

arch/sh/kernel/cpu/sh4a/setup-sh7722.c

 /*
  * SH7722 Setup
  *
- *  Copyright (C) 2006 - 2007  Paul Mundt
+ *  Copyright (C) 2006 - 2008  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -16,6 +16,36 @@
 #include <asm/clock.h>
 #include <asm/mmzone.h>
 
+static struct resource rtc_resources[] = {
+	[0] = {
+		.start	= 0xa465fec0,
+		.end	= 0xa465fec0 + 0x58 - 1,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		/* Period IRQ */
+		.start	= 45,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* Carry IRQ */
+		.start	= 46,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		/* Alarm IRQ */
+		.start	= 44,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name		= "sh-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+};
+
 static struct resource usbf_resources[] = {
 	[0] = {
 		.name	= "m66592_udc",
@@ -150,6 +180,7 @@ static struct platform_device sci_device = {
 };
 
 static struct platform_device *sh7722_devices[] __initdata = {
+	&rtc_device,
 	&usbf_device,
 	&iic_device,
 	&sci_device,
@@ -202,7 +233,6 @@ enum {
 	IRDA, JPU, LCDC,
 
 	/* interrupt groups */
-
 	SIM, RTC, DMAC0123, VIOVOU, USB, DMAC45, FLCTL, I2C, SDHI,
 };
 

arch/sh/kernel/entry-common.S

@@ -372,7 +372,7 @@ syscall_exit:
 7:	.long	do_syscall_trace_enter
 8:	.long	do_syscall_trace_leave
 
-#ifdef CONFIG_FTRACE
+#ifdef CONFIG_FUNCTION_TRACER
 	.align 2
 	.globl	_mcount
 	.type	_mcount,@function
@@ -414,4 +414,4 @@ skip_trace:
 ftrace_stub:
 	rts
 	 nop
-#endif /* CONFIG_FTRACE */
+#endif /* CONFIG_FUNCTION_TRACER */

arch/sh/kernel/sh_ksyms_32.c

@@ -50,7 +50,10 @@ EXPORT_SYMBOL(__udelay);
 EXPORT_SYMBOL(__ndelay);
 EXPORT_SYMBOL(__const_udelay);
 
-#define DECLARE_EXPORT(name) extern void name(void);EXPORT_SYMBOL(name)
+#define DECLARE_EXPORT(name)		\
+	extern void name(void);EXPORT_SYMBOL(name)
+#define MAYBE_DECLARE_EXPORT(name)	\
+	extern void name(void) __weak;EXPORT_SYMBOL(name)
 
 /* These symbols are generated by the compiler itself */
 DECLARE_EXPORT(__udivsi3);
@@ -109,10 +112,8 @@ DECLARE_EXPORT(__movmemSI12_i4);
  * compiler which include backported patches.
  */
 DECLARE_EXPORT(__udiv_qrnnd_16);
-#if !defined(CONFIG_CPU_SH2)
-DECLARE_EXPORT(__sdivsi3_i4i);
-DECLARE_EXPORT(__udivsi3_i4i);
-#endif
+MAYBE_DECLARE_EXPORT(__sdivsi3_i4i);
+MAYBE_DECLARE_EXPORT(__udivsi3_i4i);
 #endif
 #else /* GCC 3.x */
 DECLARE_EXPORT(__movstr_i4_even);
@@ -133,7 +134,7 @@ EXPORT_SYMBOL(flush_dcache_page);
 EXPORT_SYMBOL(clear_user_page);
 #endif
 
-#ifdef CONFIG_FTRACE
+#ifdef CONFIG_FUNCTION_TRACER
 EXPORT_SYMBOL(mcount);
 #endif
 EXPORT_SYMBOL(csum_partial);

arch/sh/mm/cache-sh2a.c

@@ -59,7 +59,7 @@ void __flush_purge_region(void *start, int size)
 
 	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
 		ctrl_outl((v & CACHE_PHYSADDR_MASK),
-			  CACHE_OC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+			  CACHE_OC_ADDRESS_ARRAY | (v & 0x000007f0) | 0x00000008);
 	}
 	back_to_cached();
 	local_irq_restore(flags);
@@ -82,14 +82,14 @@ void __flush_invalidate_region(void *start, int size)
 	/* I-cache invalidate */
 	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
 		ctrl_outl((v & CACHE_PHYSADDR_MASK),
-			  CACHE_IC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+			  CACHE_IC_ADDRESS_ARRAY | (v & 0x000007f0) | 0x00000008);
 	}
 #else
 	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
 		ctrl_outl((v & CACHE_PHYSADDR_MASK),
-			  CACHE_IC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+			  CACHE_IC_ADDRESS_ARRAY | (v & 0x000007f0) | 0x00000008);
 		ctrl_outl((v & CACHE_PHYSADDR_MASK),
-			  CACHE_OC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+			  CACHE_OC_ADDRESS_ARRAY | (v & 0x000007f0) | 0x00000008);
 	}
 #endif
 	back_to_cached();

arch/sh/oprofile/op_model_sh7750.c

@@ -255,10 +255,9 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 		return -ENODEV;
 
 	ops = &sh7750_perf_counter_ops;
-	ops->cpu_type = (char *)get_cpu_subtype(&current_cpu_data);
+	ops->cpu_type = "sh/sh7750";
 
-	printk(KERN_INFO "oprofile: using SH-4 (%s) performance monitoring.\n",
-	       sh7750_perf_counter_ops.cpu_type);
+	printk(KERN_INFO "oprofile: using SH-4 performance monitoring.\n");
 
 	/* Clear the counters */
 	ctrl_outw(ctrl_inw(PMCR1) | PMCR_PMCLR, PMCR1);
@@ -270,4 +269,3 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 void oprofile_arch_exit(void)
 {
 }
-

arch/sh/tools/mach-types

@@ -13,7 +13,6 @@ RTS7751R2D		SH_RTS7751R2D
 # List of companion chips / MFDs.
 #
 HD64461			HD64461
-HD64465			HD64465
 
 #
 # List of boards.

drivers/cdrom/gdrom.c

@@ -495,9 +495,10 @@ static int gdrom_bdops_open(struct block_device *bdev, fmode_t mode)
 	return cdrom_open(gd.cd_info, bdev, mode);
 }
 
-static int gdrom_bdops_release(struct block_device *bdev, fmode_t mode)
+static int gdrom_bdops_release(struct gendisk *disk, fmode_t mode)
 {
-	return cdrom_release(gd.cd_info, mode);
+	cdrom_release(gd.cd_info, mode);
+	return 0;
 }
 
 static int gdrom_bdops_mediachanged(struct gendisk *disk)

drivers/pcmcia/Kconfig

@@ -188,10 +188,6 @@ config PCMCIA_M8XX
 
 	  This driver is also available as a module called m8xx_pcmcia.
 
-config HD64465_PCMCIA
-	tristate "HD64465 host bridge support"
-	depends on HD64465 && PCMCIA
-
 config PCMCIA_AU1X00
 	tristate "Au1x00 pcmcia support"
 	depends on SOC_AU1X00 && PCMCIA

drivers/pcmcia/Makefile

@@ -22,7 +22,6 @@ obj-$(CONFIG_I82365)				+= i82365.o
 obj-$(CONFIG_I82092)				+= i82092.o
 obj-$(CONFIG_TCIC)				+= tcic.o
 obj-$(CONFIG_PCMCIA_M8XX)			+= m8xx_pcmcia.o
-obj-$(CONFIG_HD64465_PCMCIA)			+= hd64465_ss.o
 obj-$(CONFIG_PCMCIA_SA1100)			+= sa11xx_core.o sa1100_cs.o
 obj-$(CONFIG_PCMCIA_SA1111)			+= sa11xx_core.o sa1111_cs.o
 obj-$(CONFIG_M32R_PCC)				+= m32r_pcc.o

drivers/serial/sh-sci.c

@@ -250,8 +250,7 @@ static inline void h8300_sci_disable(struct uart_port *port)
 }
 #endif
 
-#if defined(SCI_ONLY) || defined(SCI_AND_SCIF) && \
-    defined(__H8300H__) || defined(__H8300S__)
+#if defined(__H8300H__) || defined(__H8300S__)
 static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag)
 {
 	int ch = (port->mapbase - SMR0) >> 3;
@@ -285,11 +284,6 @@ static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag)
 #define sci_init_pins_irda NULL
 #endif
 
-#ifdef SCI_ONLY
-#define sci_init_pins_scif NULL
-#endif
-
-#if defined(SCIF_ONLY) || defined(SCI_AND_SCIF)
 #if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
 static void sci_init_pins_scif(struct uart_port* port, unsigned int cflag)
 {
@@ -449,7 +443,6 @@ static inline int scif_rxroom(struct uart_port *port)
 	return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
 }
 #endif
-#endif /* SCIF_ONLY || SCI_AND_SCIF */
 
 static inline int sci_txroom(struct uart_port *port)
 {
@@ -485,11 +478,9 @@ static void sci_transmit_chars(struct uart_port *port)
 		return;
 	}
 
-#ifndef SCI_ONLY
 	if (port->type == PORT_SCIF)
 		count = scif_txroom(port);
 	else
-#endif
 		count = sci_txroom(port);
 
 	do {
@@ -519,12 +510,10 @@ static void sci_transmit_chars(struct uart_port *port)
 	} else {
 		ctrl = sci_in(port, SCSCR);
 
-#if !defined(SCI_ONLY)
 		if (port->type == PORT_SCIF) {
 			sci_in(port, SCxSR); /* Dummy read */
 			sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
 		}
-#endif
 
 		ctrl |= SCI_CTRL_FLAGS_TIE;
 		sci_out(port, SCSCR, ctrl);
@@ -547,11 +536,9 @@ static inline void sci_receive_chars(struct uart_port *port)
 		return;
 
 	while (1) {
-#if !defined(SCI_ONLY)
 		if (port->type == PORT_SCIF)
 			count = scif_rxroom(port);
 		else
-#endif
 			count = sci_rxroom(port);
 
 		/* Don't copy more bytes than there is room for in the buffer */
@@ -810,26 +797,27 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr)
 
 static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 {
-        unsigned short ssr_status, scr_status;
-        struct uart_port *port = ptr;
+	unsigned short ssr_status, scr_status;
+	struct uart_port *port = ptr;
+	irqreturn_t ret = IRQ_NONE;
 
         ssr_status = sci_in(port,SCxSR);
         scr_status = sci_in(port,SCSCR);
 
 	/* Tx Interrupt */
-        if ((ssr_status & 0x0020) && (scr_status & 0x0080))
-                sci_tx_interrupt(irq, ptr);
+	if ((ssr_status & 0x0020) && (scr_status & SCI_CTRL_FLAGS_TIE))
+		ret = sci_tx_interrupt(irq, ptr);
 	/* Rx Interrupt */
-        if ((ssr_status & 0x0002) && (scr_status & 0x0040))
-                sci_rx_interrupt(irq, ptr);
+	if ((ssr_status & 0x0002) && (scr_status & SCI_CTRL_FLAGS_RIE))
+		ret = sci_rx_interrupt(irq, ptr);
 	/* Error Interrupt */
-        if ((ssr_status & 0x0080) && (scr_status & 0x0400))
-                sci_er_interrupt(irq, ptr);
+	if ((ssr_status & 0x0080) && (scr_status & SCI_CTRL_FLAGS_REIE))
+		ret = sci_er_interrupt(irq, ptr);
 	/* Break Interrupt */
-        if ((ssr_status & 0x0010) && (scr_status & 0x0200))
-                sci_br_interrupt(irq, ptr);
+	if ((ssr_status & 0x0010) && (scr_status & SCI_CTRL_FLAGS_REIE))
+		ret = sci_br_interrupt(irq, ptr);
 
-	return IRQ_HANDLED;
+	return ret;
 }
 
 #if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK)
@@ -1054,10 +1042,8 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	sci_out(port, SCSCR, 0x00);	/* TE=0, RE=0, CKE1=0 */
 
-#if !defined(SCI_ONLY)
 	if (port->type == PORT_SCIF)
 		sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
-#endif
 
 	smr_val = sci_in(port, SCSMR) & 3;
 	if ((termios->c_cflag & CSIZE) == CS7)

drivers/serial/sh-sci.h

@@ -16,7 +16,6 @@
 # define SCPCR  0xA4000116 /* 16 bit SCI and SCIF */
 # define SCPDR  0xA4000136 /* 8  bit SCI and SCIF */
 # define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
-# define SCI_AND_SCIF
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705)
 # define SCIF0		0xA4400000
 # define SCIF2		0xA4410000
@@ -30,17 +29,15 @@
  * SCIF0 (0xA4400000) -> Internal clock, SCK pin as serial clock output
  */
 # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
       defined(CONFIG_CPU_SUBTYPE_SH7721)
 # define SCSCR_INIT(port)  0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
-# define SCIF_ONLY
 #define SCIF_ORER    0x0200   /* overrun error bit */
 #elif defined(CONFIG_SH_RTS7751R2D)
+# define SCSPTR1 0xFFE0001C /* 8 bit SCIF */
 # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
 # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7750)  || \
       defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
       defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
@@ -53,28 +50,24 @@
 # define SCSCR_INIT(port) (((port)->type == PORT_SCI) ? \
 	0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \
 	0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ )
-# define SCI_AND_SCIF
 #elif defined(CONFIG_CPU_SUBTYPE_SH7760)
 # define SCSPTR0 0xfe600024 /* 16 bit SCIF */
 # define SCSPTR1 0xfe610024 /* 16 bit SCIF */
 # define SCSPTR2 0xfe620024 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001  /* overrun error bit */
 # define SCSCR_INIT(port)          0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
 # define SCSPTR0 0xA4400000	  /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
 # define PACR 0xa4050100
 # define PBCR 0xa4050102
 # define SCSCR_INIT(port)          0x3B
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7343)
 # define SCSPTR0 0xffe00010	/* 16 bit SCIF */
 # define SCSPTR1 0xffe10010	/* 16 bit SCIF */
 # define SCSPTR2 0xffe20010	/* 16 bit SCIF */
 # define SCSPTR3 0xffe30010	/* 16 bit SCIF */
 # define SCSCR_INIT(port) 0x32	/* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7722)
 # define PADR			0xA4050120
 # define PSDR			0xA405013e
@@ -82,7 +75,6 @@
 # define PSCR			0xA405011E
 # define SCIF_ORER		0x0001	/* overrun error bit */
 # define SCSCR_INIT(port)	0x0038	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7366)
 # define SCPDR0			0xA405013E      /* 16 bit SCIF0 PSDR */
 # define SCSPTR0		SCPDR0
@@ -97,12 +89,10 @@
 # define SCSPTR5                0xa4050128
 # define SCIF_ORER              0x0001  /* overrun error bit */
 # define SCSCR_INIT(port)       0x0038  /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
 # define SCSPTR2 0xffe80020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001   /* overrun error bit */
 # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
 # define SCIF_BASE_ADDR    0x01030000
 # define SCIF_ADDR_SH5     PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR
@@ -111,14 +101,11 @@
 # define SCSPTR2           ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */
 # define SCLSR2            ((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */
 # define SCSCR_INIT(port)  0x38		/* TIE=0,RIE=0, TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_H83007) || defined(CONFIG_H83068)
 # define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
-# define SCI_ONLY
 # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
 #elif defined(CONFIG_H8S2678)
 # define SCSCR_INIT(port)          0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
-# define SCI_ONLY
 # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7763)
 # define SCSPTR0 0xffe00024 /* 16 bit SCIF */
@@ -126,20 +113,17 @@
 # define SCSPTR2 0xffe10020 /* 16 bit SCIF/IRDA */
 # define SCIF_ORER 0x0001  /* overrun error bit */
 # define SCSCR_INIT(port)	0x38	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7770)
 # define SCSPTR0 0xff923020 /* 16 bit SCIF */
 # define SCSPTR1 0xff924020 /* 16 bit SCIF */
 # define SCSPTR2 0xff925020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001  /* overrun error bit */
 # define SCSCR_INIT(port)	0x3c /* TIE=0,RIE=0,TE=1,RE=1,REIE=1,cke=2 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7780)
 # define SCSPTR0	0xffe00024	/* 16 bit SCIF */
 # define SCSPTR1	0xffe10024	/* 16 bit SCIF */
 # define SCIF_ORER	0x0001		/* Overrun error bit */
 # define SCSCR_INIT(port)	0x3a	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7785)
 # define SCSPTR0	0xffea0024	/* 16 bit SCIF */
 # define SCSPTR1	0xffeb0024	/* 16 bit SCIF */
@@ -149,7 +133,6 @@
 # define SCSPTR5	0xffef0024	/* 16 bit SCIF */
 # define SCIF_OPER	0x0001		/* Overrun error bit */
 # define SCSCR_INIT(port)	0x3a	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \
       defined(CONFIG_CPU_SUBTYPE_SH7206) || \
       defined(CONFIG_CPU_SUBTYPE_SH7263)
@@ -158,14 +141,12 @@
 # define SCSPTR2 0xfffe9020 /* 16 bit SCIF */
 # define SCSPTR3 0xfffe9820 /* 16 bit SCIF */
 # define SCSCR_INIT(port)	0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7619)
 # define SCSPTR0 0xf8400020 /* 16 bit SCIF */
 # define SCSPTR1 0xf8410020 /* 16 bit SCIF */
 # define SCSPTR2 0xf8420020 /* 16 bit SCIF */
 # define SCIF_ORER 0x0001  /* overrun error bit */
 # define SCSCR_INIT(port)	0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SHX3)
 # define SCSPTR0 0xffc30020		/* 16 bit SCIF */
 # define SCSPTR1 0xffc40020		/* 16 bit SCIF */
@@ -173,7 +154,6 @@
 # define SCSPTR3 0xffc60020		/* 16 bit SCIF */
 # define SCIF_ORER 0x0001		/* Overrun error bit */
 # define SCSCR_INIT(port)	0x38	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-# define SCIF_ONLY
 #else
 # error CPU subtype not defined
 #endif
@@ -186,6 +166,7 @@
 #if defined(CONFIG_CPU_SUBTYPE_SH7750)  || \
     defined(CONFIG_CPU_SUBTYPE_SH7091)  || \
     defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7722)  || \
     defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
     defined(CONFIG_CPU_SUBTYPE_SH7751)  || \
     defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
@@ -244,55 +225,28 @@
 # define SCIF_TXROOM_MAX 16
 #endif
 
-#if defined(SCI_ONLY)
-# define SCxSR_TEND(port)		SCI_TEND
-# define SCxSR_ERRORS(port)		SCI_ERRORS
-# define SCxSR_RDxF(port)               SCI_RDRF
-# define SCxSR_TDxE(port)               SCI_TDRE
-# define SCxSR_ORER(port)		SCI_ORER
-# define SCxSR_FER(port)		SCI_FER
-# define SCxSR_PER(port)		SCI_PER
-# define SCxSR_BRK(port)		0x00
-# define SCxSR_RDxF_CLEAR(port)		0xbc
-# define SCxSR_ERROR_CLEAR(port)	0xc4
-# define SCxSR_TDxE_CLEAR(port)		0x78
-# define SCxSR_BREAK_CLEAR(port)	0xc4
-#elif defined(SCIF_ONLY)
-# define SCxSR_TEND(port)		SCIF_TEND
-# define SCxSR_ERRORS(port)		SCIF_ERRORS
-# define SCxSR_RDxF(port)               SCIF_RDF
-# define SCxSR_TDxE(port)               SCIF_TDFE
+#define SCxSR_TEND(port)	(((port)->type == PORT_SCI) ? SCI_TEND   : SCIF_TEND)
+#define SCxSR_ERRORS(port)	(((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS)
+#define SCxSR_RDxF(port)	(((port)->type == PORT_SCI) ? SCI_RDRF   : SCIF_RDF)
+#define SCxSR_TDxE(port)	(((port)->type == PORT_SCI) ? SCI_TDRE   : SCIF_TDFE)
+#define SCxSR_FER(port)		(((port)->type == PORT_SCI) ? SCI_FER    : SCIF_FER)
+#define SCxSR_PER(port)		(((port)->type == PORT_SCI) ? SCI_PER    : SCIF_PER)
+#define SCxSR_BRK(port)		(((port)->type == PORT_SCI) ? 0x00       : SCIF_BRK)
+
 #if defined(CONFIG_CPU_SUBTYPE_SH7705)
-# define SCxSR_ORER(port)		SCIF_ORER
+# define SCxSR_ORER(port)	(((port)->type == PORT_SCI) ? SCI_ORER : SCIF_ORER)
 #else
-# define SCxSR_ORER(port)		0x0000
+# define SCxSR_ORER(port)	(((port)->type == PORT_SCI) ? SCI_ORER : 0x0000)
 #endif
-# define SCxSR_FER(port)		SCIF_FER
-# define SCxSR_PER(port)		SCIF_PER
-# define SCxSR_BRK(port)		SCIF_BRK
+
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
     defined(CONFIG_CPU_SUBTYPE_SH7721)
-# define SCxSR_RDxF_CLEAR(port)         (sci_in(port,SCxSR)&0xfffc)
-# define SCxSR_ERROR_CLEAR(port)        (sci_in(port,SCxSR)&0xfd73)
-# define SCxSR_TDxE_CLEAR(port)         (sci_in(port,SCxSR)&0xffdf)
-# define SCxSR_BREAK_CLEAR(port)        (sci_in(port,SCxSR)&0xffe3)
-#else
-/* SH7705 can also use this, clearing is same between 7705 and 7709 */
-# define SCxSR_RDxF_CLEAR(port)		0x00fc
-# define SCxSR_ERROR_CLEAR(port)	0x0073
-# define SCxSR_TDxE_CLEAR(port)		0x00df
-# define SCxSR_BREAK_CLEAR(port)	0x00e3
-#endif
+# define SCxSR_RDxF_CLEAR(port)	 (sci_in(port, SCxSR) & 0xfffc)
+# define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73)
+# define SCxSR_TDxE_CLEAR(port)	 (sci_in(port, SCxSR) & 0xffdf)
+# define SCxSR_BREAK_CLEAR(port) (sci_in(port, SCxSR) & 0xffe3)
 #else
-# define SCxSR_TEND(port)	 (((port)->type == PORT_SCI) ? SCI_TEND   : SCIF_TEND)
-# define SCxSR_ERRORS(port)	 (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS)
-# define SCxSR_RDxF(port)        (((port)->type == PORT_SCI) ? SCI_RDRF   : SCIF_RDF)
-# define SCxSR_TDxE(port)        (((port)->type == PORT_SCI) ? SCI_TDRE   : SCIF_TDFE)
-# define SCxSR_ORER(port)        (((port)->type == PORT_SCI) ? SCI_ORER   : 0x0000)
-# define SCxSR_FER(port)         (((port)->type == PORT_SCI) ? SCI_FER    : SCIF_FER)
-# define SCxSR_PER(port)         (((port)->type == PORT_SCI) ? SCI_PER    : SCIF_PER)
-# define SCxSR_BRK(port)         (((port)->type == PORT_SCI) ? 0x00       : SCIF_BRK)
 # define SCxSR_RDxF_CLEAR(port)	 (((port)->type == PORT_SCI) ? 0xbc : 0x00fc)
 # define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073)
 # define SCxSR_TDxE_CLEAR(port)  (((port)->type == PORT_SCI) ? 0x78 : 0x00df)
@@ -574,18 +528,20 @@ static inline int sci_rxd_in(struct uart_port *port)
       defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
       defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
       defined(CONFIG_CPU_SUBTYPE_SH7750S) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7091)  || \
-      defined(CONFIG_CPU_SUBTYPE_SH4_202)
+      defined(CONFIG_CPU_SUBTYPE_SH7091)
 static inline int sci_rxd_in(struct uart_port *port)
 {
-#ifndef SCIF_ONLY
 	if (port->mapbase == 0xffe00000)
 		return ctrl_inb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */
-#endif
-#ifndef SCI_ONLY
 	if (port->mapbase == 0xffe80000)
 		return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
-#endif
+	return 1;
+}
+#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+	if (port->mapbase == 0xffe80000)
+		return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
 #elif defined(CONFIG_CPU_SUBTYPE_SH7760)
@@ -651,7 +607,7 @@ static inline int sci_rxd_in(struct uart_port *port)
 #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
 static inline int sci_rxd_in(struct uart_port *port)
 {
-         return sci_in(port, SCSPTR)&0x0001 ? 1 : 0; /* SCIF */
+         return sci_in(port, SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
 }
 #elif defined(__H8300H__) || defined(__H8300S__)
 static inline int sci_rxd_in(struct uart_port *port)