提交 1fbece15 编写于 作者: D David Brownell 提交者: Dominik Brodowski

[PATCH] pcmcia: at91_cf update

More correct AT91 CF wakeup logic ... only enable/disable the IRQ wakeup
capability, not the IRQ itself.  That way the we know that the IRQ will be
disabled correctly, in suspend/resume logic instead of ARM IRQ code.

Most of the pin multiplexing setup has moved to the devices.c setup code.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
上级 9eed2867
......@@ -241,12 +241,6 @@ static int __init at91_cf_probe(struct platform_device *pdev)
csa = at91_sys_read(AT91_EBI_CSA);
at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH);
/* force poweron defaults for these pins ... */
(void) at91_set_A_periph(AT91_PIN_PC9, 0); /* A25/CFRNW */
(void) at91_set_A_periph(AT91_PIN_PC10, 0); /* NCS4/CFCS */
(void) at91_set_A_periph(AT91_PIN_PC11, 0); /* NCS5/CFCE1 */
(void) at91_set_A_periph(AT91_PIN_PC12, 0); /* NCS6/CFCE2 */
/* nWAIT is _not_ a default setting */
(void) at91_set_A_periph(AT91_PIN_PC6, 1); /* nWAIT */
......@@ -322,6 +316,7 @@ static int __init at91_cf_probe(struct platform_device *pdev)
if (board->irq_pin)
free_irq(board->irq_pin, cf);
fail0a:
device_init_wakeup(&pdev->dev, 0);
free_irq(board->det_pin, cf);
device_init_wakeup(&pdev->dev, 0);
fail0:
......@@ -360,26 +355,20 @@ static int at91_cf_suspend(struct platform_device *pdev, pm_message_t mesg)
struct at91_cf_data *board = cf->board;
pcmcia_socket_dev_suspend(&pdev->dev, mesg);
if (device_may_wakeup(&pdev->dev))
if (device_may_wakeup(&pdev->dev)) {
enable_irq_wake(board->det_pin);
else {
if (board->irq_pin)
enable_irq_wake(board->irq_pin);
} else {
disable_irq_wake(board->det_pin);
disable_irq(board->det_pin);
if (board->irq_pin)
disable_irq_wake(board->irq_pin);
}
if (board->irq_pin)
disable_irq(board->irq_pin);
return 0;
}
static int at91_cf_resume(struct platform_device *pdev)
{
struct at91_cf_socket *cf = platform_get_drvdata(pdev);
struct at91_cf_data *board = cf->board;
if (board->irq_pin)
enable_irq(board->irq_pin);
if (!device_may_wakeup(&pdev->dev))
enable_irq(board->det_pin);
pcmcia_socket_dev_resume(&pdev->dev);
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册