提交 1f65da74 编写于 作者: I Ido Schimmel 提交者: David S. Miller

mlxsw: reg: Add Switch Virtual-Port Enabling register definition

In order for a port to support {Port, VID} to FID mapping it needs to be
configured to a virtual port mode (as opposed to VLAN mode).

Add the SVPE register, which enables port virtualization.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 64790239
......@@ -976,6 +976,42 @@ static inline void mlxsw_reg_svfa_pack(char *payload, u8 local_port,
mlxsw_reg_svfa_vid_set(payload, vid);
}
/* SVPE - Switch Virtual-Port Enabling Register
* --------------------------------------------
* Enables port virtualization.
*/
#define MLXSW_REG_SVPE_ID 0x201E
#define MLXSW_REG_SVPE_LEN 0x4
static const struct mlxsw_reg_info mlxsw_reg_svpe = {
.id = MLXSW_REG_SVPE_ID,
.len = MLXSW_REG_SVPE_LEN,
};
/* reg_svpe_local_port
* Local port number
* Access: Index
*
* Note: CPU port is not supported (uses VLAN mode only).
*/
MLXSW_ITEM32(reg, svpe, local_port, 0x00, 16, 8);
/* reg_svpe_vp_en
* Virtual port enable.
* 0 - Disable, VLAN mode (VID to FID).
* 1 - Enable, Virtual port mode ({Port, VID} to FID).
* Access: RW
*/
MLXSW_ITEM32(reg, svpe, vp_en, 0x00, 8, 1);
static inline void mlxsw_reg_svpe_pack(char *payload, u8 local_port,
bool enable)
{
MLXSW_REG_ZERO(svpe, payload);
mlxsw_reg_svpe_local_port_set(payload, local_port);
mlxsw_reg_svpe_vp_en_set(payload, enable);
}
/* SFMR - Switch FID Management Register
* -------------------------------------
* Creates and configures FIDs.
......@@ -2241,6 +2277,8 @@ static inline const char *mlxsw_reg_id_str(u16 reg_id)
return "SPMLR";
case MLXSW_REG_SVFA_ID:
return "SVFA";
case MLXSW_REG_SVPE_ID:
return "SVPE";
case MLXSW_REG_SFMR_ID:
return "SFMR";
case MLXSW_REG_PMLP_ID:
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册