提交 1f518196 编写于 作者: A Amit Daniel Kachhap 提交者: Kukjin Kim

ARM: dts: Add PMIC node entry for Arndale board

Added S5M8767 PMIC DT nodes for Arndale board. Only the used
LDO's/BUCK are defined here. Also the nodes describe the default/reset
state LDO's and no power mangement tuning is implemented. The usage
desription can be found in s5m8767 device tree binding documentation.
Signed-off-by: NAmit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: NTushar Behera <tushar.behera@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
上级 89fec22d
......@@ -25,7 +25,260 @@
};
i2c@12C60000 {
status = "disabled";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <20000>;
samsung,i2c-slave-addr = <0x66>;
s5m8767_pmic@66 {
compatible = "samsung,s5m8767-pmic";
reg = <0x66>;
s5m8767,pmic-buck2-dvs-voltage = <1300000>;
s5m8767,pmic-buck3-dvs-voltage = <1100000>;
s5m8767,pmic-buck4-dvs-voltage = <1200000>;
s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 0>,
<&gpd1 1 0>,
<&gpd1 2 0>;
s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>,
<&gpx2 4 0>,
<&gpx2 5 0>;
regulators {
ldo1_reg: LDO1 {
regulator-name = "VDD_ALIVE_1.0V";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>;
};
ldo2_reg: LDO2 {
regulator-name = "VDD_28IO_DP_1.35V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>;
};
ldo3_reg: LDO3 {
regulator-name = "VDD_COMMON1_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>;
};
ldo4_reg: LDO4 {
regulator-name = "VDD_IOPERI_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
op_mode = <1>;
};
ldo5_reg: LDO5 {
regulator-name = "VDD_EXT_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>;
};
ldo6_reg: LDO6 {
regulator-name = "VDD_MPLL_1.1V";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>;
};
ldo7_reg: LDO7 {
regulator-name = "VDD_XPLL_1.1V";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>;
};
ldo8_reg: LDO8 {
regulator-name = "VDD_COMMON2_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>;
};
ldo9_reg: LDO9 {
regulator-name = "VDD_33ON_3.0V";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
op_mode = <1>;
};
ldo10_reg: LDO10 {
regulator-name = "VDD_COMMON3_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>;
};
ldo11_reg: LDO11 {
regulator-name = "VDD_ABB2_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>;
};
ldo12_reg: LDO12 {
regulator-name = "VDD_USB_3.0V";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>;
};
ldo13_reg: LDO13 {
regulator-name = "VDDQ_C2C_W_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>;
};
ldo14_reg: LDO14 {
regulator-name = "VDD18_ABB0_3_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>;
};
ldo15_reg: LDO15 {
regulator-name = "VDD10_COMMON4_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>;
};
ldo16_reg: LDO16 {
regulator-name = "VDD18_HSIC_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>;
};
ldo17_reg: LDO17 {
regulator-name = "VDDQ_MMC2_3_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>;
};
ldo18_reg: LDO18 {
regulator-name = "VDD_33ON_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
op_mode = <1>;
};
ldo22_reg: LDO22 {
regulator-name = "EXT_33_OFF";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
op_mode = <1>;
};
ldo23_reg: LDO23 {
regulator-name = "EXT_28_OFF";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
op_mode = <1>;
};
ldo25_reg: LDO25 {
regulator-name = "PVDD_LDO25";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
op_mode = <1>;
};
ldo26_reg: LDO26 {
regulator-name = "EXT_18_OFF";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
op_mode = <1>;
};
buck1_reg: BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>;
};
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>;
};
buck3_reg: BUCK3 {
regulator-name = "vdd_int";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>;
};
buck4_reg: BUCK4 {
regulator-name = "vdd_g3d";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-boot-on;
op_mode = <1>;
};
buck5_reg: BUCK5 {
regulator-name = "VDD_MEM_1.35V";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1355000>;
regulator-always-on;
regulator-boot-on;
op_mode = <1>;
};
buck9_reg: BUCK9 {
regulator-name = "VDD_33_OFF_EXT1";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <3000000>;
op_mode = <1>;
};
};
};
};
i2c@12C70000 {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册