提交 1ec3f937 编写于 作者: P Paul Mackerras 提交者: Michael Ellerman

powerpc/mm/book3s-64: Clean up some obsolete or misleading comments

No code changes.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
上级 2527083c
......@@ -4,8 +4,7 @@
/*
* Common bits between 4K and 64K pages in a linux-style PTE.
* These match the bits in the (hardware-defined) PowerPC PTE as closely
* as possible. Additional bits may be defined in pgtable-hash64-*.h
* Additional bits may be defined in pgtable-hash64-*.h
*
* Note: We only support user read/write permissions. Supervisor always
* have full read/write to pages above PAGE_OFFSET (pages below that
......@@ -14,13 +13,13 @@
* We could create separate kernel read-only if we used the 3 PP bits
* combinations that newer processors provide but we currently don't.
*/
#define _PAGE_PTE 0x00001
#define _PAGE_PTE 0x00001 /* distinguishes PTEs from pointers */
#define _PAGE_PRESENT 0x00002 /* software: pte contains a translation */
#define _PAGE_BIT_SWAP_TYPE 2
#define _PAGE_USER 0x00004 /* matches one of the PP bits */
#define _PAGE_EXEC 0x00008 /* No execute on POWER4 and newer (we invert) */
#define _PAGE_GUARDED 0x00010
/* We can derive Memory coherence from _PAGE_NO_CACHE */
#define _PAGE_USER 0x00004 /* page may be accessed by userspace */
#define _PAGE_EXEC 0x00008 /* execute permission */
#define _PAGE_GUARDED 0x00010 /* G: guarded (side-effect) page */
/* M (memory coherence) is always set in the HPTE, so we don't need it here */
#define _PAGE_COHERENT 0x0
#define _PAGE_NO_CACHE 0x00020 /* I: cache inhibit */
#define _PAGE_WRITETHRU 0x00040 /* W: cache write-through */
......
......@@ -249,8 +249,7 @@ int __hash_page_64K(unsigned long ea, unsigned long access,
return 0;
/*
* Try to lock the PTE, add ACCESSED and DIRTY if it was
* a write access. Since this is 4K insert of 64K page size
* also add _PAGE_COMBO
* a write access.
*/
new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED;
if (access & _PAGE_RW)
......
......@@ -168,11 +168,11 @@ unsigned long htab_convert_pte_flags(unsigned long pteflags)
rflags |= HPTE_R_N;
/*
* PP bits:
* Linux use slb key 0 for kernel and 1 for user.
* kernel areas are mapped by PP bits 00
* and and there is no kernel RO (_PAGE_KERNEL_RO).
* User area mapped by 0x2 and read only use by
* 0x3.
* Linux uses slb key 0 for kernel and 1 for user.
* kernel areas are mapped with PP=00
* and there is no kernel RO (_PAGE_KERNEL_RO).
* User area is mapped with PP=0x2 for read/write
* or PP=0x3 for read-only (including writeable but clean pages).
*/
if (pteflags & _PAGE_USER) {
rflags |= 0x2;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册